ADF4360-0BCP - 2600MHz Integer-N VCO Synthesizer | Analog Devices
MPN: ADF4360-0BCP ✓ Hoạt độngADF4360-0BCP Tóm tắt
An integer-N synthesizer belongs to the phase-locked-loop and frequency-generation hierarchy. Its feedback divider compares a divided RF output with a reference signal, while the internal voltage-controlled oscillator changes frequency as the loop control voltage varies. This architecture supports stable, programmable RF generation for communications, test equipment, radar, and instrumentation systems without requiring a separate VCO.
The ADF4360-0BCP is specifically positioned around the 2600 MHz center-frequency range and includes a divide-by-2 function for lower-frequency operation. This distinction is important because the divide-by-2 path broadens the functional output range while retaining one integrated RF synthesizer assembly. Its integer-N feedback architecture avoids fractional-N spur considerations, although channel spacing and reference-path design remain important when planning a compliant receiver or transmitter.
The 24-lead WFQFN exposed-pad package supports compact surface-mount layouts and provides a thermal pad beneath the device for heat spreading. Because an RF synthesizer and VCO dissipate power locally, PCB construction, exposed-pad soldering, grounding, and loop-filter layout can materially affect phase noise, tuning stability, and thermal performance. A continuous, low-impedance ground plane and careful separation of sensitive RF and digital return paths are therefore essential.
Typical uses include 2.6 GHz wireless infrastructure, microwave data links, radar test systems, RF instrumentation, frequency-agile signal sources, and local-oscillator generation. The divide-by-2 capability is useful when a system also needs an output between 1200 MHz and 1360 MHz, provided the output path and downstream circuitry are matched to the selected frequency and power condition.
When planning this part, verify the exact reference frequency, required channel spacing, output power, loop-filter values, RF output configuration, and temperature range against the manufacturer datasheet before schematic release. Keep the RF output path short, preserve the exposed-pad ground connection, and test the closed loop across its intended frequency range rather than relying only on isolated VCO measurements.
Bộ thay thế dễ dàng lắp đặt cho ADF4360-0BCP — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADF4360-0BCP (cùng hình factor và footprint) — khác nhau ở Package, Divide-by-2 Output Range, Product Type, REACH Status, RoHS Status.
ADF4360-1BCPZRL7
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADF4360-1BCPZ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ADF4360-3BCPZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADF4360-7BCPZ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ADF4360-7BCPZRL7
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADF4360-0BCP Thông số kỹ thuật
| Product Type | Fully integrated integer-N frequency synthesizer and VCO |
| Target Center Frequency | 2600 MHz |
| Divide-by-2 Output Range | 1200 MHz to 1360 MHz |
| Synthesizer Architecture | Integer-N phase-locked-loop synthesizer |
| VCO | Integrated voltage-controlled oscillator |
| Output Frequency Reference | 2600 MHz center frequency |
| Upper Frequency Listing | 2.725 GHz |
| Hộp | 24-lead WFQFN with exposed pad |
| Package Pin Count | 24 pins |
| Kiểu lắp đặt | Surface mount |
| Lead Count | 24 leads |
| Exposed Thermal Pad | Present |
| Output Division Option | Divide-by-2 |
| Trạng thái RoHS | Compliant |
| REACH Status | Compliant |
Hướng dẫn cấu hình chân ADF4360-0BCP 24 pins
Cấu hình chân cho ADF4360-0BCP (24 pins gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ADF4360-0BCP.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADF4360-0BCP phù hợp cho 6 Áp dụngs: 2.6 GHz Wireless Local Oscillator, Radar Frequency Agility, RF Signal Generator, Microwave Data-Link Carrier, RF Calibration and Production Test, Frequency-Modulated Test Transmitter.
2.6 GHz Wireless Local Oscillator
The ADF4360-0BCP fits a 2.6 GHz local-oscillator role because its specified center frequency is 2600 MHz and it integrates the integer-N PLL, VCO, and RF output functions in one package. The synthesizer can provide a programmable source for RF front-end downconversion or upconversion without a separate discrete VCO. Its divide-by-2 output, covering 1200 MHz to 1360 MHz, also supports lower-frequency receiver or test paths. The design must use the correct reference, loop filter, RF matching network, and exposed-pad grounding arrangement, and the output frequency range must be confirmed against the selected channel plan.
Được đề xuất
Radar Frequency Agility
The ADF4360-0BCP is appropriate for radar test and frequency-agile RF systems centered on the 2600 MHz region because it combines a VCO with an integer-N feedback synthesizer. A single programmable source can support coherent test-vector generation, receiver alignment, or exciter-service workflows. The documented divide-by-2 mode spanning 1200 MHz to 1360 MHz can serve lower-frequency subassembly tests. Radar signal integrity still depends on reference phase noise, loop bandwidth, output isolation, and PCB grounding, so engineers should close the PLL loop under operating conditions rather than evaluating only the free-running VCO.
Được đề xuất
RF Signal Generator
The ADF4360-0BCP can form the core of a compact RF signal generator for bench equipment targeting the 2600 MHz region. Its integrated VCO and integer-N synthesizer reduce component count and provide digital control over the generated output, while the optional 1200 MHz to 1360 MHz divide-by-2 range covers additional test points. A practical instrument implementation needs calibrated output power, a stable reference, suitable loop filtering, and an output attenuator or switch matrix. The WFQFN exposed pad must be connected to a continuous ground structure with low-indance thermal and electrical vias.
Được đề xuất
Microwave Data-Link Carrier
The 2600 MHz center-frequency design point makes the ADF4360-0BCP suitable for prototyping and service equipment associated with microwave data links. It can generate the carrier or local-oscillator reference required by a transmit or receive chain while keeping RF generation integrated on a compact surface-mount footprint. The divide-by-2 function offers a 1200 MHz to 1360 MHz output for portions of the link that operate at half the center frequency. Production designs must preserve output-to-LO isolation, use controlled-impedance routing, and verify reference spur and phase-noise contributions at the receiver detector.
Được đề xuất
RF Calibration and Production Test
The ADF4360-0BCP is useful in automated RF calibration fixtures because one programmed RF output can replace several fixed-frequency oscillators. The 2600 MHz operating point can stimulate receiver front ends, mixers, and frequency-conversion stages, while the divide-by-2 output allows a fixture to cover 1200 MHz to 1360 MHz without another source. For stable production measurements, synchronize the device to a low-phase-noise reference, isolate the output from test-fixture reflections, and automate lock detection. Warm-up time and output settling must be included in the test sequence to prevent calibration drift from being mistaken for DUT variation.
Được đề xuất
Frequency-Modulated Test Transmitter
The integrated voltage-controlled oscillator in the ADF4360-0BCP supports controlled RF modulation around the 2600 MHz design region, making it appropriate for controlled test transmitters and modulated-signal fixtures. By changing the loop-control conditions through the synthesizer architecture, a test system can generate deterministic frequency behavior for receiver and filter characterization. The lower divide-by-2 band from 1200 MHz to 1360 MHz can also stimulate related downconverted paths. Engineers should keep modulation paths well isolated from sensitive reference and feedback nodes and should validate occupied bandwidth, modulation linearity, and spur performance with the final loop filter.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADF4360-0BCP — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADF4360-1BCPZRL7 | ADF4360-1BCPZ | ADF4360-3BCPZ | ADF4360-7BCPZ |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-lead WFQFN with exposed pad | 24-lead LFCSP | 24-lead LFCSP | 24-lead LFCSP | 24-lead LFCSP |
| Frequency Option | -0 | -1 | -1 | -3 | -7 |
| Synthesizer Architecture | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO |
| Pin Compatibility | 24-lead reference footprint | Documented as pin-compatible | Same-family 24-lead package | Same-family 24-lead package | Same-family 24-lead package |
Bảo phân biệt quan trọng
- Purpose-built 2600 MHz frequency option (vsADF4360-1BCPZRL7)
- Documented 1200 MHz to 1360 MHz divide-by-2 output (vsADF4360-3BCPZ)
- Direct 2600 MHz design alignment for local-oscillator use (vsADF4360-7BCPZ)
Ghi chú thiết kế
Treat the exposed pad as both an electrical ground connection and a thermal path. Follow the Analog Devices land pattern and recommended via arrangement, provide a short connection to the ground plane, and avoid interrupting the return path beneath the package. Uneven paste loading or insufficient thermal vias can produce assembly defects and localized heating, while an interrupted ground connection can degrade RF performance and PLL behavior.
Keep the reference input, loop-filter components, control interface, and sensitive feedback routes away from the RF outputs. Use a continuous ground plane, short RF traces, controlled impedance where required, and minimal vias in the RF path. Separate noisy digital return currents from the reference and synthesizer ground paths. The exposed-pad connection and component placement should follow the manufacturer application-circuit layout rather than a generic QFN arrangement.
A package-compatible replacement does not automatically preserve RF behavior. The -0, -1, -3, and -7 options use different VCO bands, so changing frequency suffix can invalidate the loop-filter calculation, output matching network, and frequency-range assumptions. Recheck the required output, reference-divider settings, charge-pump current, loop filter, and decoupling before approving any board-level substitution.
Validate the closed-loop reference spur, phase noise, lock behavior, and output settling across temperature and supply conditions. Keep test instrumentation and calibration fixtures from unintentionally loading the RF output, and use controlled impedances to prevent reflections from corrupting measurements. Include loop-lock or signal-quality checks in automated fixtures so an unlocked or out-of-band source is detected before downstream RF tests.
Thông tin tuân thủ
RoHS and REACH compliance are identified in the ADF4360-0BCP comparison documentation. Automotive qualification, lead-free construction, halogen-free status, and conflict-minerals compliance require separate manufacturer confirmation.