ADF4360-0BCP - 2600MHz Integer-N VCO Synthesizer | Analog Devices
MPN: ADF4360-0BCP ✓ 啟用中ADF4360-0BCP 概覽
An integer-N synthesizer belongs to the phase-locked-loop and frequency-generation hierarchy. Its feedback divider compares a divided RF output with a reference signal, while the internal voltage-controlled oscillator changes frequency as the loop control voltage varies. This architecture supports stable, programmable RF generation for communications, test equipment, radar, and instrumentation systems without requiring a separate VCO.
The ADF4360-0BCP is specifically positioned around the 2600 MHz center-frequency range and includes a divide-by-2 function for lower-frequency operation. This distinction is important because the divide-by-2 path broadens the functional output range while retaining one integrated RF synthesizer assembly. Its integer-N feedback architecture avoids fractional-N spur considerations, although channel spacing and reference-path design remain important when planning a compliant receiver or transmitter.
The 24-lead WFQFN exposed-pad package supports compact surface-mount layouts and provides a thermal pad beneath the device for heat spreading. Because an RF synthesizer and VCO dissipate power locally, PCB construction, exposed-pad soldering, grounding, and loop-filter layout can materially affect phase noise, tuning stability, and thermal performance. A continuous, low-impedance ground plane and careful separation of sensitive RF and digital return paths are therefore essential.
Typical uses include 2.6 GHz wireless infrastructure, microwave data links, radar test systems, RF instrumentation, frequency-agile signal sources, and local-oscillator generation. The divide-by-2 capability is useful when a system also needs an output between 1200 MHz and 1360 MHz, provided the output path and downstream circuitry are matched to the selected frequency and power condition.
When planning this part, verify the exact reference frequency, required channel spacing, output power, loop-filter values, RF output configuration, and temperature range against the manufacturer datasheet before schematic release. Keep the RF output path short, preserve the exposed-pad ground connection, and test the closed loop across its intended frequency range rather than relying only on isolated VCO measurements.
直接替換替代品,適用於 ADF4360-0BCP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADF4360-0BCP (相同外形與佔位) — 差異在於 Package, Divide-by-2 Output Range, Product Type, REACH Status, RoHS Status.
ADF4360-1BCPZRL7
✅ 直接替換📋 參考替代品(不在目錄中)
ADF4360-1BCPZ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ADF4360-3BCPZ
✅ 直接替換📋 參考替代品(不在目錄中)
ADF4360-7BCPZ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ADF4360-7BCPZRL7
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADF4360-0BCP 規格
| Product Type | Fully integrated integer-N frequency synthesizer and VCO |
| Target Center Frequency | 2600 MHz |
| Divide-by-2 Output Range | 1200 MHz to 1360 MHz |
| Synthesizer Architecture | Integer-N phase-locked-loop synthesizer |
| VCO | Integrated voltage-controlled oscillator |
| Output Frequency Reference | 2600 MHz center frequency |
| Upper Frequency Listing | 2.725 GHz |
| 封裝 | 24-lead WFQFN with exposed pad |
| Package Pin Count | 24 pins |
| 安裝類型 | Surface mount |
| Lead Count | 24 leads |
| Exposed Thermal Pad | Present |
| Output Division Option | Divide-by-2 |
| RoHS 狀態 | Compliant |
| REACH Status | Compliant |
ADF4360-0BCP 24 pins 腳位配置指南
ADF4360-0BCP(24 pins 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADF4360-0BCP.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADF4360-0BCP 適用於 6 應用s: 2.6 GHz Wireless Local Oscillator, Radar Frequency Agility, RF Signal Generator, Microwave Data-Link Carrier, RF Calibration and Production Test, Frequency-Modulated Test Transmitter.
2.6 GHz Wireless Local Oscillator
The ADF4360-0BCP fits a 2.6 GHz local-oscillator role because its specified center frequency is 2600 MHz and it integrates the integer-N PLL, VCO, and RF output functions in one package. The synthesizer can provide a programmable source for RF front-end downconversion or upconversion without a separate discrete VCO. Its divide-by-2 output, covering 1200 MHz to 1360 MHz, also supports lower-frequency receiver or test paths. The design must use the correct reference, loop filter, RF matching network, and exposed-pad grounding arrangement, and the output frequency range must be confirmed against the selected channel plan.
推薦
Radar Frequency Agility
The ADF4360-0BCP is appropriate for radar test and frequency-agile RF systems centered on the 2600 MHz region because it combines a VCO with an integer-N feedback synthesizer. A single programmable source can support coherent test-vector generation, receiver alignment, or exciter-service workflows. The documented divide-by-2 mode spanning 1200 MHz to 1360 MHz can serve lower-frequency subassembly tests. Radar signal integrity still depends on reference phase noise, loop bandwidth, output isolation, and PCB grounding, so engineers should close the PLL loop under operating conditions rather than evaluating only the free-running VCO.
推薦
RF Signal Generator
The ADF4360-0BCP can form the core of a compact RF signal generator for bench equipment targeting the 2600 MHz region. Its integrated VCO and integer-N synthesizer reduce component count and provide digital control over the generated output, while the optional 1200 MHz to 1360 MHz divide-by-2 range covers additional test points. A practical instrument implementation needs calibrated output power, a stable reference, suitable loop filtering, and an output attenuator or switch matrix. The WFQFN exposed pad must be connected to a continuous ground structure with low-indance thermal and electrical vias.
推薦
Microwave Data-Link Carrier
The 2600 MHz center-frequency design point makes the ADF4360-0BCP suitable for prototyping and service equipment associated with microwave data links. It can generate the carrier or local-oscillator reference required by a transmit or receive chain while keeping RF generation integrated on a compact surface-mount footprint. The divide-by-2 function offers a 1200 MHz to 1360 MHz output for portions of the link that operate at half the center frequency. Production designs must preserve output-to-LO isolation, use controlled-impedance routing, and verify reference spur and phase-noise contributions at the receiver detector.
推薦
RF Calibration and Production Test
The ADF4360-0BCP is useful in automated RF calibration fixtures because one programmed RF output can replace several fixed-frequency oscillators. The 2600 MHz operating point can stimulate receiver front ends, mixers, and frequency-conversion stages, while the divide-by-2 output allows a fixture to cover 1200 MHz to 1360 MHz without another source. For stable production measurements, synchronize the device to a low-phase-noise reference, isolate the output from test-fixture reflections, and automate lock detection. Warm-up time and output settling must be included in the test sequence to prevent calibration drift from being mistaken for DUT variation.
推薦
Frequency-Modulated Test Transmitter
The integrated voltage-controlled oscillator in the ADF4360-0BCP supports controlled RF modulation around the 2600 MHz design region, making it appropriate for controlled test transmitters and modulated-signal fixtures. By changing the loop-control conditions through the synthesizer architecture, a test system can generate deterministic frequency behavior for receiver and filter characterization. The lower divide-by-2 band from 1200 MHz to 1360 MHz can also stimulate related downconverted paths. Engineers should keep modulation paths well isolated from sensitive reference and feedback nodes and should validate occupied bandwidth, modulation linearity, and spur performance with the final loop filter.
推薦
推薦產品摘要
工程參考資料,適用於 ADF4360-0BCP — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADF4360-1BCPZRL7 | ADF4360-1BCPZ | ADF4360-3BCPZ | ADF4360-7BCPZ |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-lead WFQFN with exposed pad | 24-lead LFCSP | 24-lead LFCSP | 24-lead LFCSP | 24-lead LFCSP |
| Frequency Option | -0 | -1 | -1 | -3 | -7 |
| Synthesizer Architecture | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO |
| Pin Compatibility | 24-lead reference footprint | Documented as pin-compatible | Same-family 24-lead package | Same-family 24-lead package | Same-family 24-lead package |
主要差異化特點
- Purpose-built 2600 MHz frequency option (對比ADF4360-1BCPZRL7)
- Documented 1200 MHz to 1360 MHz divide-by-2 output (對比ADF4360-3BCPZ)
- Direct 2600 MHz design alignment for local-oscillator use (對比ADF4360-7BCPZ)
設計說明
Treat the exposed pad as both an electrical ground connection and a thermal path. Follow the Analog Devices land pattern and recommended via arrangement, provide a short connection to the ground plane, and avoid interrupting the return path beneath the package. Uneven paste loading or insufficient thermal vias can produce assembly defects and localized heating, while an interrupted ground connection can degrade RF performance and PLL behavior.
Keep the reference input, loop-filter components, control interface, and sensitive feedback routes away from the RF outputs. Use a continuous ground plane, short RF traces, controlled impedance where required, and minimal vias in the RF path. Separate noisy digital return currents from the reference and synthesizer ground paths. The exposed-pad connection and component placement should follow the manufacturer application-circuit layout rather than a generic QFN arrangement.
A package-compatible replacement does not automatically preserve RF behavior. The -0, -1, -3, and -7 options use different VCO bands, so changing frequency suffix can invalidate the loop-filter calculation, output matching network, and frequency-range assumptions. Recheck the required output, reference-divider settings, charge-pump current, loop filter, and decoupling before approving any board-level substitution.
Validate the closed-loop reference spur, phase noise, lock behavior, and output settling across temperature and supply conditions. Keep test instrumentation and calibration fixtures from unintentionally loading the RF output, and use controlled impedances to prevent reflections from corrupting measurements. Include loop-lock or signal-quality checks in automated fixtures so an unlocked or out-of-band source is detected before downstream RF tests.
合規資訊
RoHS and REACH compliance are identified in the ADF4360-0BCP comparison documentation. Automotive qualification, lead-free construction, halogen-free status, and conflict-minerals compliance require separate manufacturer confirmation.