Analog Devices

ADM202EARWZ - 2-Channel ±15kV RS-232 Transceiver | Analog Devices

MPN: ADM202EARWZ ✓ Hoạt động
5 V Vdss 16-pin SOIC Package
MOQ: 1 |

ADM202EARWZ Tóm tắt

The Analog Devices ADM202EARWZ is a 2-channel RS-232 line driver/receiver transceiver operating from a single 5 V supply, with enhanced ±15 kV ESD protection and data rates up to 230 kbps in a 16-pin SOIC package. Its integrated charge-pump circuitry develops approximately ±10 V RS-232 output levels from four external 0.1 µF capacitors.

An RS-232 transceiver is an interface IC that combines a differential line driver and receiver for communicating between computers, instruments, industrial controllers, and other equipment. The driver converts TTL-compatible logic into bipolar RS-232 signals, while the receiver converts bipolar RS-232 signals back into logic levels. The ADM202EARWZ belongs to the RS-232 interface hierarchy, where robust protection, supply efficiency, and signal timing determine reliable performance in electrically noisy environments.

Key features include two driver and two receiver channels, operation from a single +5 V supply, four external 0.1 µF charge-pump capacitors, and compliance with EIA-232-E and CCITT V.28 specifications. The enhanced device supports data rates up to 230 kbps. Its protection features include ±15 kV ESD protection on transmitter outputs and receiver inputs, making the interface suitable for industrial, instrumentation, and data-transfer equipment.

The on-chip voltage-doubling and inverter circuitry generates the bipolar voltage required by RS-232 without a separate power supply. This architecture permits compact implementation while preserving standard-compatible logic interfaces. The manufacturer identifies the ADM202E family as a robust, pin-compatible upgrade for existing ADM202, ADM232L, and MAX202E/MAX232E sockets when the appropriate package and pin arrangement are used.

Typical uses include industrial control interfaces, laboratory instrumentation, barcode and data-acquisition equipment, embedded service ports, and legacy peripheral connections. The ADM202EARWZ is especially useful where equipment must retain an RS-232 port while adding stronger ESD protection and operation at rates as high as 230 kbps.

PCB design should keep the charge-pump capacitors close to their designated pins, route each RS-232 conductor away from sensitive analog and high-speed digital traces, and provide a low-impedance ground path between the transceiver and the connected equipment. Designers should also follow the manufacturer’s pin and polarity guidance to avoid confusing the transmit and receive paths.

This product overview combines the manufacturer’s technical descriptions with practical guidance for protection, layout, application selection, and replacement assessment. It is intended to help engineers determine whether the ADM202EARWZ’s 16-pin implementation, 5 V supply requirement, channel count, and enhanced ESD rating fit a specific RS-232 interface.

Bộ thay thế dễ dàng lắp đặt cho ADM202EARWZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADM202EARWZ (cùng hình factor và footprint) — khác nhau ở Package, Supply Voltage, Interface Standard, Product Type.

Analog Devices
Package: 16-lead wide SOIC
Interface Standard: TIA/EIA-232-E and V.28
Product Type: Dual RS-232 line driver/receiver transceiver
So sánh với ADM202EARWZ →
Analog Devices
Package: 16-lead SOIC (SOIC-16)
Supply Voltage: 5 V (single supply)
So sánh với ADM202EARWZ →

ADM202ARWZ

✅ Drop-In
📦 16-SOIC
Earlier ADM202 family device with lower ESD protection than ADM202EARWZ’s ±15 kV rating; supply and channel configuration remain comparable

📋 Tham chiếu thay thế (không có trong danh mục)

ADM202EARUZ

✅ Drop-In
Analog Devices
📦 16-SOIC
2-channel RS-232 line driver/receiver transceiver · 2 channels · 2 channels · 5 V · 230 kbps · Approximately ±10 V · 4 external capacitors at 0.1 µF each · ±15 kV

Liên hệ để biết giá

Xem tài liệu →

ADM202ARUZ

✅ Drop-In
📦 16-SOIC
Earlier ADM202 family device with lower ESD protection than the enhanced ADM202EARWZ, while retaining the 16-pin SOIC interface

📋 Tham chiếu thay thế (không có trong danh mục)

ADM202ARW

✅ Drop-In
📦 16-SOIC
Earlier ADM202 variant with reduced ESD protection relative to ADM202EARWZ and a different ordering suffix

📋 Tham chiếu thay thế (không có trong danh mục)

ADM202EARWZ Thông số kỹ thuật

Product Type 2-channel RS-232 line driver/receiver transceiver
Number of Driver Channels 2 channels
Number of Receiver Channels 2 channels
Điện áp cung cấp 5 V
Supply Voltage Range 4.5 V to 5.5 V
Maximum Data Rate 230 kbps
RS-232 Output Level Approximately ±10 V
Charge-Pump Capacitors 4 external capacitors at 0.1 µF
ESD Protection ±15 kV
Interface Standard TIA/EIA-232-E and CCITT V.28
Hộp 16-pin SOIC
Kiểu lắp đặt Surface mount
Packaging Tape & reel

Hướng dẫn cấu hình chân ADM202EARWZ 16-pin soic

Cấu hình chân cho ADM202EARWZ (16-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-pin soic cho ADM202EARWZ

Không có dữ liệu chân cụ thể sẵn có cho ADM202EARWZ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADM202EARWZ phù hợp cho 6 Áp dụngs: Industrial Control Interfaces, Laboratory Test Equipment, Embedded Service Ports, Data Acquisition Systems, Barcode and Identification Equipment, Legacy Peripheral Connectivity.

🏭

Industrial Control Interfaces

The ADM202EARWZ is appropriate for legacy industrial controllers and service equipment that retains an RS-232 port. Its 2-channel architecture supports bidirectional point-to-point communication from a single 5 V supply, while the enhanced ±15 kV ESD rating improves resilience on externally accessible serial connectors. Two driver and two receiver channels provide enough connectivity for a complete console or control link. The device supports operation up to 230 kbps, allowing it to handle command traffic, diagnostic data, and configuration exchanges without moving to a faster differential bus. In a typical installation, the logic-side pins connect to a microcontroller or embedded controller and the RS-232 side connects to the external equipment through a protected cable.

🔧

Laboratory Test Equipment

The ADM202EARWZ fits laboratory instruments that need a legacy computer-control port alongside a 5 V logic supply. The 230 kbps maximum data rate supports reliable transfer of measurements, commands, and status information over short RS-232 cables. Because laboratory instruments may be connected and disconnected frequently, the ±15 kV ESD protection is a meaningful advantage over an unprotected legacy interface. The four external 0.1 µF charge-pump capacitors are the principal external support components and should be positioned according to the manufacturer layout. Its 2-channel arrangement can handle transmit and receive paths on one compact device, reducing board area compared with separate driver and receiver packages.

🖥️

Embedded Service Ports

The ADM202EARWZ is suitable for embedded systems that retain a service connector for configuration, diagnostics, or firmware recovery. Operating from 4.5 V to 5.5 V allows use around common 5 V digital rails, and the 230 kbps rate is adequate for interactive command consoles and diagnostic protocols. Enhanced ±15 kV ESD protection is especially useful when a service port connects to a chassis-mounted cable that may carry electrostatic discharge. The 16-pin SOIC package supports conventional surface-mount assembly, while the integrated charge pump avoids a separate negative voltage supply. Logic-side signals connect to the embedded controller, and the two bipolar driver and receiver channels provide flexible point-to-point connectivity.

📊

Data Acquisition Systems

The ADM202EARWZ can connect a data-acquisition controller to a legacy serial instrument or terminal. Two full RS-232 channels allow command transmission and measurement reception, while the 230 kbps limit supports moderate-rate acquisition control and short data bursts rather than continuous high-bandwidth streaming. The device’s single 5 V architecture simplifies power planning around logic-intensive measurement hardware. Its ±15 kV ESD protection improves reliability when cables connect external equipment that may be at different ground potentials. The transmit and receive paths should be routed as a matched pair, with the charge-pump section isolated from sensitive measurement circuitry. Keep grounding and cable returns arranged to minimize common-mode voltage at the receiver inputs.

🏭

Barcode and Identification Equipment

The ADM202EARWZ is useful in barcode readers, identification terminals, and configuration tools that communicate through RS-232. The 2-channel arrangement supports bidirectional command and status traffic, and the 230 kbps capability is more than adequate for typical identifier payloads and short diagnostic records. A single 5 V supply reduces power complexity in compact equipment, while ±15 kV ESD protection adds resilience at a connector that may be exposed during installation or maintenance. Designers should preserve the bipolar RS-232 signal path, observe the charge-pump capacitor layout, and avoid substituting a TTL-level UART directly at the connector. The 16-pin SOIC footprint simplifies assembly where space is limited but full industrial environmental protection is still required.

🔧

Legacy Peripheral Connectivity

The ADM202EARWZ enables modern controller boards to communicate with legacy printers, analyzers, and peripheral controllers that expose RS-232 connectors. It provides the required bipolar driver outputs and receiver inputs without requiring a separate negative supply. Operation up to 230 kbps accommodates typical peripheral-control protocols, while the enhanced ESD rating is valuable when the port is exposed to user-accessible cabling. The logic side connects to a host controller through standard digital levels, and the line side connects through the specified RS-232 network interface. Because RS-232 is point-to-point, confirm that each driver connects to a receiver and that no multi-drop arrangement is being attempted. Proper grounding and short external cables remain necessary for dependable communication.

What are the key specifications of ADM202EARWZ that engineers should know?
The ADM202EARWZ is a 2-channel RS-232 transceiver with a 4.5 V to 5.5 V supply range, operation up to 230 kbps, and ±15 kV ESD protection. It uses four external 0.1 µF charge-pump capacitors to generate approximately ±10 V RS-232 output levels. According to the Analog Devices ADM202E product information, the device meets or exceeds TIA/EIA-232-E and CCITT V.28 requirements and is packaged in a 16-pin SOIC.
Where to buy ADM202EARWZ online?
The ADM202EARWZ can be requested through the “Request a Quote” form on this page for current commercial availability, lot-size requirements, and delivery planning. The manufacturer lists ADM202EARWZ as a 2-channel, full RS-232 transceiver in a 16-pin SOIC package. The form is the appropriate route for obtaining a current quote without relying on a static price that may no longer reflect contract quantity or inventory.
What is the price of ADM202EARWZ?
Current pricing for the ADM202EARWZ should be requested through the “Request a Quote” form on this page because commercial terms can depend on quantity, packaging, and available inventory. The part is a 2-channel RS-232 transceiver operating from 4.5 V to 5.5 V and supporting rates up to 230 kbps. Submit the required quantity and delivery location with the quote request for an actionable commercial response.
What is the lead time for ADM202EARWZ?
The current lead time for ADM202EARWZ should be confirmed through the “Request a Quote” form on this page by stating the required quantity and target delivery date. Analog Devices describes a 4.5 V to 5.5 V, 2-channel RS-232 interface with ±15 kV ESD protection, so the device is electrically suitable for protected legacy serial-port designs. The quote request provides the route for current manufacturing and logistics confirmation.
Is ADM202EARWZ in stock?
Current inventory for ADM202EARWZ should be checked through the “Request a Quote” form on this page rather than inferred from a catalog listing. The component is the enhanced, 16-pin SOIC version of Analog Devices’ 2-channel RS-232 transceiver family. When requesting a quote, specify the required quantity, reel or tube preference, and shipment destination so the commercial response reflects the correct ordering configuration.
ADM202EARWZ vs ADM202EARUZ - which is better for a new design?
ADM202EARWZ and ADM202EARUZ are enhanced ADM202E variants identified in the same 16-pin SOIC comparison context, so their electrical role is closely related while their ordering presentation differs. According to Analog Devices, both family members use a 5 V supply, provide 230 kbps operation, and meet EIA-232-E and CCITT V.28 specifications. Confirm the exact package, delivery format, and ordering suffix with the manufacturer before treating either suffix as interchangeable.
What is the difference between ADM202EARWZ and ADM202ARWZ?
ADM202EARWZ is the enhanced ADM202E product, while ADM202ARWZ belongs to the ADM202 family; the “E” distinguishes the enhanced ESD-protected implementation. The enhanced family is described by Analog Devices as supporting ±15 kV ESD protection and 230 kbps operation from a single 5 V supply. Both appear in 16-pin SOIC-related ordering contexts, but board-level replacement should still confirm pinout, protection rating, and package dimensions.
When should I choose ADM202EARWZ over an older ADM202?
Choose ADM202EARWZ when an existing RS-232 design needs the enhanced device’s ±15 kV ESD protection and operation up to 230 kbps. The manufacturer describes ADM202E as a robust, pin-compatible upgrade for suitable ADM202, ADM232L, and MAX202E/MAX232E sockets. This makes it attractive for industrial and instrumentation equipment where exposed serial connectors are susceptible to electrostatic discharge, provided the package and pin arrangement match.
Is ADM202EARWZ suitable for industrial equipment?
The ADM202EARWZ is suitable for industrial RS-232 interfaces that require a 4.5 V to 5.5 V supply, 230 kbps operation, and enhanced electrostatic-discharge resilience. Its ±15 kV protection rating is the principal advantage for equipment with accessible or externally routed serial connectors. The device itself is not an industrial-temperature claim; confirm the exact temperature grade in the manufacturer documentation before using it across the full industrial temperature range.
What can replace ADM202EARWZ?
A drop-in replacement must use the same 16-pin SOIC footprint, preserve the transmit and receive pin functions, accept the same 4.5 V to 5.5 V supply, and provide compatible RS-232 levels and data rate. The ADM202E family is identified by Analog Devices as pin-compatible with appropriate ADM202, ADM232L, and MAX202E/MAX232E sockets, but the package variant must be checked carefully. Treat a cross-reference as a starting point, not a qualification.
Is ADM202EARWZ the same as ADM202ARW?
The ADM202EARWZ and ADM202ARW share the ADM202 interface family, but they are not automatically identical for procurement or design release. ADM202EARWZ is the enhanced 16-pin SOIC version with ±15 kV ESD protection, while ADM202ARW belongs to the earlier ADM202 ordering family. Compare exact package dimensions, pinout, temperature grade, supply limits, and ESD rating before deciding whether one can replace the other.
Where can I download the ADM202EARWZ datasheet PDF?
The official ADM202E datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADM2023_1181A.pdf. It covers the ADM202E and ADM1181A interface devices, including the single 5 V supply architecture, external 0.1 µF charge-pump capacitors, 230 kbps operation, package options, and ESD ratings. Use the pin-description table when assigning PCB nets.
Where can I find the ADM202EARWZ pinout?
The ADM202EARWZ pin assignments are shown in the official ADM202E datasheet published by Analog Devices. Because the component is a 16-pin SOIC, verify each driver output, receiver input, supply, ground, and charge-pump capacitor connection against that table before layout or replacement. The ADM202E family page also identifies the device as pin-compatible with suitable legacy sockets, but compatibility still depends on the exact package.
How does ADM202EARWZ generate RS-232 voltage levels?
The ADM202EARWZ uses an on-chip voltage-doubling and inverter circuit powered from a single 5 V supply. Four external 0.1 µF capacitors support the charge-pump function and allow approximately ±10 V RS-232 output levels to be generated. According to the Analog Devices ADM202E description, this architecture avoids a separate bipolar supply while meeting TIA/EIA-232-E and CCITT V.28 requirements.
How should charge-pump capacitors be placed around ADM202EARWZ?
Place the four 0.1 µF charge-pump capacitors close to their associated ADM202EARWZ pins and keep their return paths short and symmetrical. The Analog Devices design guidance identifies these external capacitors as necessary for the voltage-doubling and inverter circuitry. Follow the datasheet’s reference layout, observe the capacitor voltage and tolerance requirements, and route the high-voltage charge-pump nodes away from sensitive receiver and external signal paths.

Dữ liệu tham khảo kỹ thuật cho ADM202EARWZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ADM202EARWZ for a 16-pin SOIC RS-232 design that benefits from enhanced ±15 kV ESD protection and requires operation up to 230 kbps from a single 5 V supply. ADM202ARWZ, ADM202ARUZ, and ADM202ARW are appropriate alternatives when a legacy ADM202 implementation is adequate, but their protection is lower than that of the enhanced ADM202EARWZ. ADM202EARUZ is the closest same-family choice for an enhanced 16-pin SOIC design, though the exact ordering suffix and delivery format should be confirmed. Before releasing any substitution, compare the complete pin list, SOIC body width, lead pitch, temperature grade, supply limits, receiver thresholds, and ESD rating. For a board with an exposed connector or long external cable, the enhanced protection of ADM202EARWZ generally provides more margin than an older ADM202 variant.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADM202ARWZ ADM202EARUZ ADM202ARUZ ADM202ARW
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Product Family Enhanced ADM202E ADM202 Enhanced ADM202E ADM202 ADM202
ESD Protection ±15 kV Lower protection rating than ADM202EARWZ ±15 kV Lower protection rating than ADM202EARWZ Lower protection rating than ADM202EARWZ

Bảo phân biệt quan trọng

  • Enhanced electrostatic-discharge protection (vsADM202ARWZ)
  • High-speed RS-232 operation (vsADM202ARWZ)
  • Single-supply bipolar output generation (vsADM202ARW)

Ghi chú thiết kế

Place the four 0.1 µF charge-pump capacitors close to the pins identified in the manufacturer’s reference layout. Keep each capacitor’s connection to the device short, symmetrical, and free of unnecessary loop area because these components carry switched charge-pump current. Confirm capacitor voltage rating, tolerance, and dielectric requirements from the official datasheet before layout release.

Separate the charge-pump and RS-232 driver routing from sensitive receiver inputs and unrelated low-level analog traces. Route each RS-232 signal as a driver-to-receiver point-to-point connection with a corresponding ground reference, and avoid long unshielded branches. The approximately ±10 V driver outputs require spacing appropriate to the board’s fabrication and isolation requirements.

Do not connect the ADM202EARWZ receiver directly to a TTL UART because the receiver expects bipolar RS-232 levels. Also avoid treating the 16-SOIC outline as sufficient proof of interchangeability: verify the exact pinout, package width, supply limits, temperature grade, and ESD requirement. The 230 kbps figure is a maximum supported rate and should not replace signal-integrity and timing validation in the target cable environment.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The enhanced ADM202E family is described as compliant with the EU EMC directive 89/336/EEC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated for the exact MPN in the available technical information.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

adm202earwz reel ADM202EARWZ datasheet ADM202EARWZ datasheet pdf ADM202EARWZ pinout ADM202EARWZ replacement ADM202EARWZ equivalent ADM202EARWZ footprint ADM202EARWZ price ADM202EARWZ stock ADM202EARWZ vs ADM202EARUZ Analog Devices ADM202EARWZ ADM202EARWZ 230kbps RS-232 ADM202EARWZ 16-SOIC pinout ADM202EARWZ industrial interface

Các bộ phận và thuật ngữ liên quan

Analog Devices ADM202EARWZ ADM202ARWZ ADM202EARUZ ADM202ARUZ ADM202ARW RS-232 line driver line receiver RS-232 transceiver interface IC semiconductor charge pump TIA/EIA-232-E CCITT V.28 ESD protection 16-SOIC SOIC family surface mount industrial control laboratory instrumentation data acquisition 5 V power supply 230 kbps
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ