ADM3202ARUZ - 460 kbps Dual RS-232 Transceiver | Analog Devices
MPN: ADM3202ARUZ ✓ Hoạt độngADM3202ARUZ Tóm tắt
An RS-232 transceiver is an interface IC that translates between digital logic levels and the voltage-defined, single-ended signaling used by RS-232 equipment. Within the interface hierarchy, the ADM3202 belongs to the RS-232 transceiver family, a line-interface device within interface ICs and broader semiconductor signal-chain systems. It is intended for equipment that requires standards-compatible electrical levels even when the host controller uses a low-voltage CMOS supply.
The ADM3202 family supports data rates up to 460 kbps and is specified at 3.3 V. Its integrated charge-pump circuit generates the positive and negative RS-232 levels from one low-voltage supply, while four external 0.1 µF capacitors support operation of the voltage doubler and inverter. The ADM3202 provides a practical alternative to discrete driver and receiver circuitry where board area, component count, and assembly simplicity are priorities.
The device uses 2 transmitters and 2 receivers in a 16-TSSOP package. EIA-232E and CCITT V.28 conformity provides a defined signaling framework for point-to-point serial links. The family also supports several package options, and the ADM3202ARUZ specifically uses the 16-pin TSSOP format. Four external capacitors and the regulated supply must be placed close enough to the charge-pump pins to maintain stable operation and limit switching noise.
Typical applications include industrial serial adapters, test and measurement equipment, data-acquisition systems, embedded controllers, point-of-sale terminals, and portable instruments. In each case, the two receivers can accommodate two incoming RS-232 signals while the two drivers produce two outgoing signals. The 460 kbps capability is suitable for substantially faster communication than conventional low-speed serial-console links, while operation from 3.3 V simplifies integration with modern control electronics.
The primary design consideration is charge-pump capacitor placement. Use the specified 0.1 µF capacitors on the designated pins and maintain a short, direct return path to the device ground. Designers should also preserve the RS-232 driver output levels at the connector and account for the unidirectional nature of individual RS-232 lines when assigning driver and receiver channels.
This product overview combines the manufacturer specifications, package details, replacement considerations, interface guidance, and practical application analysis needed to evaluate the ADM3202ARUZ for a new design or an existing 16-TSSOP RS-232 interface.
Bộ thay thế dễ dàng lắp đặt cho ADM3202ARUZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADM3202ARUZ (cùng hình factor và footprint) — khác nhau ở Package, Maximum Data Rate.
ADM3222ARUZ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADM3232EARUZ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MAX3232EIPWG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3232EIPWG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ST232
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADM3202ARUZ Thông số kỹ thuật
| Transceiver Configuration | 2/2 (2 drivers and 2 receivers) |
| Interface Standard | RS-232/EIA-232E/CCITT V.28 |
| Maximum Data Rate | 460 kbps |
| Supply Voltage Range | 3 V to 5.5 V |
| Specified Supply Voltage | 3.3 V |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Charge-Pump Capacitor Value | 0.1 µF each, 4 capacitors |
| Charge-Pump Architecture | Voltage doubler and inverter |
| Hộp | 16-TSSOP, 4.40 mm width |
| Kiểu lắp đặt | Surface mount |
| Packaging | Tube |
| Low-Power Shutdown | Not available on ADM3202; available on ADM3222 and ADM1385 |
Hướng dẫn cấu hình chân ADM3202ARUZ 16-tssop, 4.40 mm width
Cấu hình chân cho ADM3202ARUZ (16-tssop, 4.40 mm width gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ADM3202ARUZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADM3202ARUZ phù hợp cho 6 Áp dụngs: Industrial Serial Port Interface, Test and Measurement Equipment, Data Acquisition Systems, Portable Instrumentation, Embedded Serial Console, Point-of-Sale and Retail Peripherals.
Industrial Serial Port Interface
The ADM3202ARUZ fits industrial control equipment that needs two RS-232 outputs and two inputs while operating from a 3.3 V system rail. Its 460 kbps maximum data rate supports higher-throughput instrument traffic, and the two-driver, two-receiver arrangement simplifies multiport cabling. Place the four required 0.1 µF charge-pump capacitors beside their assigned pins and route the RS-232 lines to protected connector circuits. The 16-TSSOP package also supports compact controller boards where a larger SOIC or PDIP would consume unnecessary board area.
Được đề xuất
Test and Measurement Equipment
The ADM3202ARUZ is suitable for programmable instruments and test systems that exchange commands and measurement results over RS-232. The 460 kbps capability provides headroom for compact high-speed serial links, while the 3.3 V supply aligns with modern control hardware. Its 2/2 topology can connect one host to two peripheral instruments or route separate command and data channels. Designers should use shielded cable where required, maintain the specified charge-pump layout, and avoid treating RS-232 as a multi-drop bus.
Được đề xuất
Data Acquisition Systems
The ADM3202ARUZ can connect a data-acquisition controller to legacy or industrial RS-232 equipment through its two drivers and two receivers. The 3.3 V operating point reduces the need for a separate interface rail, while data rates up to 460 kbps accommodate compact telemetry and command traffic. Its EIA-232E and CCITT V.28 conformity supports standard serial equipment, but the system designer must still account for cable length, connector pinouts, grounding, and protection at externally accessible ports.
Được đề xuất
Portable Instrumentation
The ADM3202ARUZ is appropriate for portable diagnostic and field-service instruments that use a 3.3 V embedded controller and require an RS-232 service port. Two transmit and two receive channels can support host-to-device command traffic without requiring two separate interface packages. The 16-TSSOP footprint is useful for compact handheld constructions. Because the ADM3202 has no shutdown input, power-conscious products should control the surrounding supply rail or consider the ADM3222 when a dedicated low-power shutdown function is required.
Được đề xuất
Embedded Serial Console
The ADM3202ARUZ can bridge a low-voltage embedded controller to a conventional RS-232 console, programmer, or service terminal. Its 2/2 channel count allows the same board to support separate inbound and outbound connections, and the 460 kbps maximum data rate is more than sufficient for many command-line workloads. Compact 16-TSSOP packaging helps preserve PCB area. Keep charge-pump loops compact, provide a stable 3.3 V rail, and confirm grounding and cable shielding for reliable operation outside an enclosure.
Được đề xuất
Point-of-Sale and Retail Peripherals
The ADM3202ARUZ is useful in compact retail peripherals that exchange short commands or transaction data with RS-232 equipment. Its 2/2 configuration supports bidirectional communication and standard device interoperation, while the 3.3 V supply integrates readily with embedded payment and peripheral controllers. The 16-TSSOP package is compact for space-constrained terminal designs. For cables routed near motors or switching supplies, include appropriate transient protection and verify that the selected connector interface preserves the required RS-232 voltage levels.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADM3202ARUZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADM3222ARUZ | ADM3232EARUZ | MAX3232 | MAX3232E | ST232 |
|---|---|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated | Maxim Integrated | STMicroelectronics |
Bảo phân biệt quan trọng
- High-speed dual RS-232 capability (vsST232)
- Single-supply 3.3 V implementation (vsMAX3232)
- Two drivers and two receivers in a compact package (vsMAX3221EIPWR)
- Cross-brand replacement path with ESD option (vsMAX3232E)
Ghi chú thiết kế
Place all four 0.1 µF charge-pump capacitors directly beside the corresponding ADM3202ARUZ pins, using the shortest possible traces and an uninterrupted ground connection. These capacitors are part of the voltage-doubler and inverter system rather than optional bypass components. Confirm the pin map against the manufacturer datasheet before layout because reversing a capacitor connection can prevent normal startup or impair the generated RS-232 voltage levels.
Provide a stable 3.3 V supply to the ADM3202ARUZ and route its return current directly to the device ground plane. The chip generates positive and negative RS-232 levels through its charge-pump network, so supply transients and ground displacement can appear at the interface outputs. Decouple the supply locally and keep switching regulators and high-current return paths away from the charge-pump and driver return area.
Do not treat RS-232 as a multi-drop bus or substitute a logic-level UART directly for the transceiver. The two driver outputs are primarily for outgoing signals and the two receiver inputs accept incoming signals; crossing and grounding must follow the connector and equipment documentation. At externally accessible ports, add suitable transient and ESD protection, while checking that protection components do not distort the required RS-232 voltage levels.
For high data rates, minimize connector stubs and use an appropriate RS-232 cable rather than long unshielded PCB interconnects. Although the ADM3202ARUZ supports rates up to 460 kbps, usable distance also depends on baud rate, cable capacitance, noise, grounding, and endpoint behavior. Keep the interface away from switching nodes and motors, and validate the complete cable and equipment path during system testing.
Thông tin tuân thủ
The ADM3202 is an industrial interface IC, so AEC-Q100 qualification is not applicable. Specific RoHS, REACH, lead-free, and halogen-free declarations for ADM3202ARUZ require confirmation from the manufacturer product or compliance documentation.