Analog Devices

ADM3202ARUZ - 460 kbps Dual RS-232 Transceiver | Analog Devices

MPN: ADM3202ARUZ ✓ 啟用中
3 V to 5.5 V Vdss 16-TSSOP, 4.40 mm width Package
MOQ: 1 |

ADM3202ARUZ 概覽

Analog Devices ADM3202ARUZ is a high-speed, 2/2-channel RS-232 interface transceiver with a 460 kbps data rate, a single 3.3 V supply, and four external 0.1 µF charge-pump capacitors. The device is packaged in a 16-pin TSSOP and conforms to the EIA-232E and CCITT V.28 specifications. It combines two RS-232 drivers and two receivers for bidirectional serial-port communication in compact industrial, instrumentation, and embedded systems.

An RS-232 transceiver is an interface IC that translates between digital logic levels and the voltage-defined, single-ended signaling used by RS-232 equipment. Within the interface hierarchy, the ADM3202 belongs to the RS-232 transceiver family, a line-interface device within interface ICs and broader semiconductor signal-chain systems. It is intended for equipment that requires standards-compatible electrical levels even when the host controller uses a low-voltage CMOS supply.

The ADM3202 family supports data rates up to 460 kbps and is specified at 3.3 V. Its integrated charge-pump circuit generates the positive and negative RS-232 levels from one low-voltage supply, while four external 0.1 µF capacitors support operation of the voltage doubler and inverter. The ADM3202 provides a practical alternative to discrete driver and receiver circuitry where board area, component count, and assembly simplicity are priorities.

The device uses 2 transmitters and 2 receivers in a 16-TSSOP package. EIA-232E and CCITT V.28 conformity provides a defined signaling framework for point-to-point serial links. The family also supports several package options, and the ADM3202ARUZ specifically uses the 16-pin TSSOP format. Four external capacitors and the regulated supply must be placed close enough to the charge-pump pins to maintain stable operation and limit switching noise.

Typical applications include industrial serial adapters, test and measurement equipment, data-acquisition systems, embedded controllers, point-of-sale terminals, and portable instruments. In each case, the two receivers can accommodate two incoming RS-232 signals while the two drivers produce two outgoing signals. The 460 kbps capability is suitable for substantially faster communication than conventional low-speed serial-console links, while operation from 3.3 V simplifies integration with modern control electronics.

The primary design consideration is charge-pump capacitor placement. Use the specified 0.1 µF capacitors on the designated pins and maintain a short, direct return path to the device ground. Designers should also preserve the RS-232 driver output levels at the connector and account for the unidirectional nature of individual RS-232 lines when assigning driver and receiver channels.

This product overview combines the manufacturer specifications, package details, replacement considerations, interface guidance, and practical application analysis needed to evaluate the ADM3202ARUZ for a new design or an existing 16-TSSOP RS-232 interface.

直接替換替代品,適用於 ADM3202ARUZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: ADM3202ARUZ (相同外形與佔位) — 差異在於 Package, Maximum Data Rate.

Analog Devices
Package: 16-lead TSSOP
Maximum Data Rate: 230 kbps
比較對象 ADM3202ARUZ →
Texas Instruments
Package: 16-TSSOP (0.173 in, 4.40 mm width)
比較對象 ADM3202ARUZ →

ADM3222ARUZ

✅ 直接替換 ⚠️ 規格未經驗證
📦 TSSOP-16
Adds low-power shutdown that the ADM3202 lacks; channel count and 3.3 V supply remain comparable

📋 參考替代品(不在目錄中)

ADM3232EARUZ

✅ 直接替換 ⚠️ 規格未經驗證
📦 TSSOP-16
Adds shutdown and fail-safe behavior relative to the ADM3202 while retaining the 2/2 RS-232 architecture

📋 參考替代品(不在目錄中)

MAX3232EIPWG4

✅ 直接替換
Texas Instruments
📦 TSSOP-16
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

聯絡詢價

查看資料表 →

MAX3232EIPWG4

✅ 直接替換
Texas Instruments
📦 TSSOP-16
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

聯絡詢價

查看資料表 →

ST232

✅ 直接替換
📦 TSSOP-16
Dual RS-232 transceiver with similar low-voltage operation; data rate and charge-pump values differ

📋 參考替代品(不在目錄中)

ADM3202ARUZ 規格

Transceiver Configuration 2/2 (2 drivers and 2 receivers)
Interface Standard RS-232/EIA-232E/CCITT V.28
Maximum Data Rate 460 kbps
Supply Voltage Range 3 V to 5.5 V
Specified Supply Voltage 3.3 V
Number of Drivers 2
Number of Receivers 2
Charge-Pump Capacitor Value 0.1 µF each, 4 capacitors
Charge-Pump Architecture Voltage doubler and inverter
封裝 16-TSSOP, 4.40 mm width
安裝類型 Surface mount
Packaging Tube
Low-Power Shutdown Not available on ADM3202; available on ADM3222 and ADM1385

ADM3202ARUZ 16-tssop, 4.40 mm width 腳位配置指南

ADM3202ARUZ(16-tssop, 4.40 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

ADM3202ARUZ 的 16-tssop, 4.40 mm width 封裝腳位圖

無詳細腳位定義資料: ADM3202ARUZ.

請參閱 資料表 以查看完整腳位配置。

典型應用

ADM3202ARUZ 適用於 6 應用s: Industrial Serial Port Interface, Test and Measurement Equipment, Data Acquisition Systems, Portable Instrumentation, Embedded Serial Console, Point-of-Sale and Retail Peripherals.

🏭

Industrial Serial Port Interface

The ADM3202ARUZ fits industrial control equipment that needs two RS-232 outputs and two inputs while operating from a 3.3 V system rail. Its 460 kbps maximum data rate supports higher-throughput instrument traffic, and the two-driver, two-receiver arrangement simplifies multiport cabling. Place the four required 0.1 µF charge-pump capacitors beside their assigned pins and route the RS-232 lines to protected connector circuits. The 16-TSSOP package also supports compact controller boards where a larger SOIC or PDIP would consume unnecessary board area.

🔧

Test and Measurement Equipment

The ADM3202ARUZ is suitable for programmable instruments and test systems that exchange commands and measurement results over RS-232. The 460 kbps capability provides headroom for compact high-speed serial links, while the 3.3 V supply aligns with modern control hardware. Its 2/2 topology can connect one host to two peripheral instruments or route separate command and data channels. Designers should use shielded cable where required, maintain the specified charge-pump layout, and avoid treating RS-232 as a multi-drop bus.

🖥️

Data Acquisition Systems

The ADM3202ARUZ can connect a data-acquisition controller to legacy or industrial RS-232 equipment through its two drivers and two receivers. The 3.3 V operating point reduces the need for a separate interface rail, while data rates up to 460 kbps accommodate compact telemetry and command traffic. Its EIA-232E and CCITT V.28 conformity supports standard serial equipment, but the system designer must still account for cable length, connector pinouts, grounding, and protection at externally accessible ports.

💊

Portable Instrumentation

The ADM3202ARUZ is appropriate for portable diagnostic and field-service instruments that use a 3.3 V embedded controller and require an RS-232 service port. Two transmit and two receive channels can support host-to-device command traffic without requiring two separate interface packages. The 16-TSSOP footprint is useful for compact handheld constructions. Because the ADM3202 has no shutdown input, power-conscious products should control the surrounding supply rail or consider the ADM3222 when a dedicated low-power shutdown function is required.

📱

Embedded Serial Console

The ADM3202ARUZ can bridge a low-voltage embedded controller to a conventional RS-232 console, programmer, or service terminal. Its 2/2 channel count allows the same board to support separate inbound and outbound connections, and the 460 kbps maximum data rate is more than sufficient for many command-line workloads. Compact 16-TSSOP packaging helps preserve PCB area. Keep charge-pump loops compact, provide a stable 3.3 V rail, and confirm grounding and cable shielding for reliable operation outside an enclosure.

🔧

Point-of-Sale and Retail Peripherals

The ADM3202ARUZ is useful in compact retail peripherals that exchange short commands or transaction data with RS-232 equipment. Its 2/2 configuration supports bidirectional communication and standard device interoperation, while the 3.3 V supply integrates readily with embedded payment and peripheral controllers. The 16-TSSOP package is compact for space-constrained terminal designs. For cables routed near motors or switching supplies, include appropriate transient protection and verify that the selected connector interface preserves the required RS-232 voltage levels.

What are the key specifications of ADM3202ARUZ that engineers should know?
The ADM3202ARUZ is a 2/2 RS-232 transceiver rated for data rates up to 460 kbps and operation from a single 3.3 V supply. According to the Analog Devices ADM3202 manufacturer datasheet, it provides two drivers, two receivers, EIA-232E and CCITT V.28 conformity, and requires four external 0.1 µF charge-pump capacitors. The device is offered in a 16-TSSOP package for surface-mount assembly.
Where can I download the ADM3202ARUZ datasheet PDF?
The official ADM3202ARUZ technical information is available from the Analog Devices ADM3202 product page and the manufacturer datasheet linked from that page. The manufacturer page states that the ADM3202 family conforms to EIA-232E and CCITT V.28, operates up to 230 kbps on the family description, and includes the features needed to evaluate the 460 kbps ADM3202 variant. Use the package pin-description table when assigning PCB tracks.
What is the ADM3202ARUZ pinout?
The ADM3202ARUZ uses a 16-pin TSSOP package with two RS-232 drivers, two receivers, a 3.3 V supply, ground, and four charge-pump capacitor connections. The exact numbered signal assignment must be taken from the pin-description table in the Analog Devices ADM3202 manufacturer datasheet. Preserve the exposed-pad-free TSSOP-16 land pattern and place the four 0.1 µF capacitors at their designated pins.
What is the supply voltage range of ADM3202ARUZ?
The ADM3202ARUZ operates from a 3 V to 5.5 V supply and is specifically specified at 3.3 V. According to the Analog Devices ADM3202 manufacturer datasheet, a single +3.3 V rail supplies both the logic circuitry and the charge-pump system. The family uses four external 0.1 µF capacitors to generate the bipolar voltage levels required for RS-232 signaling.
How fast can ADM3202ARUZ transmit RS-232 data?
The ADM3202ARUZ supports data rates up to 460 kbps. According to the Analog Devices ADM3202 manufacturer datasheet, the ADM3202 family is designed for high-speed RS-232/V.28 communication and includes features specified at 3.3 V. Actual channel performance also depends on cable length, connector wiring, data-line capacitance, grounding, and the performance of the connected endpoint.
Does ADM3202ARUZ need external charge-pump capacitors?
Yes, the ADM3202ARUZ requires four external 0.1 µF capacitors. According to the Analog Devices ADM3202 manufacturer datasheet, these capacitors operate the voltage doubler and inverter that generate the positive and negative RS-232 levels from a single 3.3 V supply. Place each capacitor close to the corresponding charge-pump pin and keep the associated ground return short and direct.
What can replace ADM3202ARUZ on an existing PCB?
The MAX3232 is identified as a pin-to-pin replacement for the ADM3202 in the cited TI E2E interface discussion. The MAX3232E may be preferable when improved IEC-referenced ESD performance is important, but its exact rating should be confirmed in its manufacturer datasheet. Before replacement, verify the 16-TSSOP footprint, charge-pump capacitor connections, supply range, data rate, and shutdown requirements against the finished design.
Is ADM3202ARUZ the same as MAX3232?
No, ADM3202ARUZ and MAX3232 are different RS-232 transceiver products from different manufacturers, although the MAX3232 is reported as pin-to-pin compatible with the ADM3202. The ADM3202 is specified for data rates up to 460 kbps, while the replacement should be checked for its own speed, supply, charge-pump, and protection ratings. Confirm every pin against the manufacturer datasheet before production use.
ADM3202ARUZ vs MAX3232E - which is better for a compact RS-232 design?
The ADM3202ARUZ is preferable when the 460 kbps family rating and Analog Devices 16-TSSOP implementation are priorities. The MAX3232E is a relevant alternative when its pin arrangement is confirmed and stronger IEC-referenced ESD protection is required. The cited interface discussion specifically identifies MAX3232 as pin-to-pin compatible with ADM3202, while recommending the MAX3232E for users concerned about ESD performance.
When should I choose ADM3202ARUZ over MAX3232?
Choose ADM3202ARUZ when a 2/2 RS-232 interface, operation from 3.3 V, and a data rate up to 460 kbps are required in a 16-TSSOP design. Choose MAX3232 or MAX3232E only after confirming that the substitute's pinout, charge-pump capacitor values, supply limits, speed, and protection specifications meet the application. The practical distinction is device-specific feature and qualification matching, not a different RS-232 signaling standard.
Is ADM3202ARUZ suitable for battery-powered portable instruments?
The ADM3202ARUZ is suitable for portable instruments when the surrounding system can operate the interface from 3.3 V and accepts its 16-TSSOP implementation. The Analog Devices ADM3202 family is intended for low-voltage RS-232 systems, and the ADM3222 and ADM1385 relatives add low-power shutdown for designs that need it. The ADM3202 itself does not include that shutdown function.
Where can I buy ADM3202ARUZ and check its current price and lead time?
Use the Request a Quote form on this page to ask for the current ADM3202ARUZ price, stock status, minimum order quantity, and lead time. The form requests the exact MPN and supporting commercial details without relying on a static price. Quote timing can vary with order quantity, package availability, and manufacturing conditions, so confirm the production schedule before committing the BOM.
Is ADM3202ARUZ currently in stock?
Current ADM3202ARUZ inventory should be confirmed through the Request a Quote form on this page. The device is a standard catalog RS-232 transceiver listed by the manufacturer and major distributors, but transactional availability can change independently of lifecycle status. Provide your required quantity, delivery location, and target date so the order can be checked against current supply.
What is the lead time for ADM3202ARUZ?
The current lead time for ADM3202ARUZ depends on order quantity and current channel availability. Submit the MPN, required quantity, packaging preference, and requested delivery date through the Request a Quote form on this page. The manufacturer page identifies ADM3202 as an established product, but a production commitment should always use the confirmed order-specific schedule rather than a generic stock estimate.
What is the best cross-brand equivalent for ADM3202ARUZ?
The MAX3232 is the strongest cross-brand candidate identified for the ADM3202ARUZ because the cited interface discussion explicitly describes it as pin-to-pin compatible. The MAX3232E may be selected where improved IEC-referenced ESD performance is valuable. A valid replacement must still use the same 16-TSSOP land pattern and match the 3.3 V supply, charge-pump capacitor arrangement, channel count, data-rate requirement, and shutdown needs.
Are ADM3202ARUZ and ADM3222ARUZ drop-in replacements for each other?
The ADM3222ARUZ belongs to the same Analog Devices RS-232 family and uses the corresponding 16-TSSOP implementation, but it adds a low-power shutdown function that the ADM3202 lacks. Because that feature changes the functional requirements and control behavior, it should not replace an ADM3202 design unless the shutdown pin is intentionally used and every pin connection is validated. The distinction is more important than the shared package.

工程參考資料,適用於 ADM3202ARUZ — 比較、設計指引及合規資訊。

選型指南

Choose the ADM3202ARUZ for compact 2/2 RS-232 interfaces that operate from 3.3 V and benefit from a data-rate target of up to 460 kbps. Its 16-TSSOP package and four required 0.1 µF charge-pump capacitors suit space-constrained embedded and industrial designs. Consider ADM3222ARUZ when a dedicated low-power shutdown function is required, but verify all connections because shutdown changes the functional behavior. MAX3232 and MAX3232E are cross-brand candidates identified as pin-compatible options, with the E version considered when enhanced IEC-referenced ESD protection is important. ST232 may suit similar dual RS-232 designs, but its speed and capacitor requirements should be compared before substitution. For every replacement, verify the exact 16-TSSOP footprint, numbered pins, supply range, charge-pump connections, channel count, data rate, shutdown requirements, and external protection.

與替代品比較

參數 本產品 ADM3222ARUZ ADM3232EARUZ MAX3232 MAX3232E ST232
Package 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Brand Analog Devices Analog Devices Analog Devices Maxim Integrated Maxim Integrated STMicroelectronics

主要差異化特點

  • High-speed dual RS-232 capability (對比ST232)
  • Single-supply 3.3 V implementation (對比MAX3232)
  • Two drivers and two receivers in a compact package (對比MAX3221EIPWR)
  • Cross-brand replacement path with ESD option (對比MAX3232E)

設計說明

Place all four 0.1 µF charge-pump capacitors directly beside the corresponding ADM3202ARUZ pins, using the shortest possible traces and an uninterrupted ground connection. These capacitors are part of the voltage-doubler and inverter system rather than optional bypass components. Confirm the pin map against the manufacturer datasheet before layout because reversing a capacitor connection can prevent normal startup or impair the generated RS-232 voltage levels.

Provide a stable 3.3 V supply to the ADM3202ARUZ and route its return current directly to the device ground plane. The chip generates positive and negative RS-232 levels through its charge-pump network, so supply transients and ground displacement can appear at the interface outputs. Decouple the supply locally and keep switching regulators and high-current return paths away from the charge-pump and driver return area.

Do not treat RS-232 as a multi-drop bus or substitute a logic-level UART directly for the transceiver. The two driver outputs are primarily for outgoing signals and the two receiver inputs accept incoming signals; crossing and grounding must follow the connector and equipment documentation. At externally accessible ports, add suitable transient and ESD protection, while checking that protection components do not distort the required RS-232 voltage levels.

For high data rates, minimize connector stubs and use an appropriate RS-232 cable rather than long unshielded PCB interconnects. Although the ADM3202ARUZ supports rates up to 460 kbps, usable distance also depends on baud rate, cable capacitance, noise, grounding, and endpoint behavior. Keep the interface away from switching nodes and motors, and validate the complete cable and equipment path during system testing.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The ADM3202 is an industrial interface IC, so AEC-Q100 qualification is not applicable. Specific RoHS, REACH, lead-free, and halogen-free declarations for ADM3202ARUZ require confirmation from the manufacturer product or compliance documentation.

相關搜尋

adm3202aruz reel7 adm3202aruz datasheet ADM3202ARUZ pinout ADM3202ARUZ datasheet pdf ADM3202ARUZ replacement ADM3202ARUZ equivalent ADM3202ARUZ cross reference ADM3202ARUZ footprint ADM3202ARUZ price ADM3202ARUZ stock Analog Devices ADM3202ARUZ ADM3202ARUZ vs MAX3232 ADM3202 16-TSSOP RS-232 ADM3202ARUZ charge pump capacitors

相關元件與詞彙

Analog Devices ADM3202ARUZ ADM3202 ADM3222ARUZ ADM3232EARUZ MAX3232 MAX3232E ST232 RS-232 RS-232 transceiver line interface IC interface IC semiconductor EIA-232E CCITT V.28 charge-pump capacitor voltage doubler voltage inverter 16-TSSOP TSSOP package family surface-mount technology 460 kbps 3.3 V digital instrumentation industrial serial communication
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情