Analog Devices

ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

MPN: ADM3485EAN ✓ Hoạt động
3.3 V Vdss TIA/EIA RS-422 and RS-485 Rds(on) 8-pin SOIC Package
MOQ: 1 |

ADM3485EAN Tóm tắt

Analog Devices ADM3485EAN is a 3.3 V low-power RS-485/RS-422 differential data transceiver with a maximum data rate of 20 Mbps, 15 kV ESD protection, and an 8-pin SOIC package. It is designed for balanced, half-duplex communication over multipoint bus transmission lines and provides integrated driver and receiver functions for industrial, communications, and instrumentation systems.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable communication over longer cables. A differential receiver rejects common-mode noise, while the transceiver family connects equipment through bidirectional bus wiring. The ADM3485E belongs to the broader line-driver and receiver hierarchy within interface ICs, providing physical-layer signaling for multipoint networks.

Key features include operation from a 3.3 V supply, a 20 Mbps maximum data rate, 15 kV ESD protection, and compliance with TIA/EIA RS-422 and RS-485 standards over the full common-mode range. The device supports half-duplex operation and a 19 kΩ input impedance, allowing up to 19 transceivers on a bus. Low-power operation is important in distributed equipment because each node continuously contributes to the total bus loading.

The ADM3485E architecture combines a differential driver, differential receiver, driver-enable control, and receiver-enable control in one package. Driver and receiver enables support directional control on half-duplex networks. Short-circuit protection improves robustness when a bus driver drives into a fault condition, while the specified ESD protection helps protect the transceiver pins during handling and cable-side transients.

Typical applications include industrial RS-485 buses, building and factory automation networks, instrumentation links, industrial gateways, and embedded communications equipment. The 20 Mbps capability supports high-speed short-distance links, while the balanced interface and 19 kΩ input impedance are useful when multiple nodes share a bus. External protection may still be required for severe industrial surge environments.

For PCB design, place the transceiver close to the connector and bus interface, keep differential traces closely coupled, and provide the bypass capacitance and termination required by the bus topology. Avoid adding excessive capacitance to driver and receiver inputs. Do not substitute the RS-422 and RS-485 termination or biasing arrangements without checking the bus configuration.

This product page combines the Analog Devices device description, package information, cross-reference candidates, practical bus-design guidance, and parameter-level comparisons to simplify transceiver selection and PCB implementation.

Bộ thay thế dễ dàng lắp đặt cho ADM3485EAN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADM3485EAN (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package, Product Type, Driver Architecture, ESD Protection.

Maxim Integrated
Mounting Type: Through hole
Package: 8-pin PDIP
Product Type: RS-485/RS-422 transceiver
So sánh với ADM3485EAN →
Analog Devices
Mounting Type: Through-hole
Package: 8-pin PDIP
Product Type: RS-485/RS-422 transceiver
So sánh với ADM3485EAN →

ADM3485EANZ

✅ Drop-In
📦 8-SOIC
Equivalent 8-SOIC ordering variant with identical stated terminal, package, performance, and functional characteristics; no quantified electrical difference is published

📋 Tham chiếu thay thế (không có trong danh mục)

ADM3485ARZ

✅ Drop-In
📦 8-SOIC
Same ADM3485 family and 8-SOIC footprint, but the ESD-protection grade and ordering code differ; exact data-rate and protection differences require datasheet comparison

📋 Tham chiếu thay thế (không có trong danh mục)

MAX3485CPA+

✅ Drop-In
Maxim Integrated
📦 8-SOIC
RS-485/RS-422 transceiver · 3.3 V · Up to 10 Mbps · 1 driver and 1 receiver · RS-485 and RS-422 · Slew-rate limited · 8-pin PDIP · Through hole

Liên hệ để biết giá

Xem tài liệu →

MAX3485ECPA+

✅ Drop-In
Analog Devices
📦 8-SOIC
RS-485/RS-422 transceiver · 3.3 V · 12 Mbps · ±15 kV · 1 driver / 1 receiver · Half-duplex · RS-422 and RS-485 · Slew-rate-limited

Liên hệ để biết giá

Xem tài liệu →

ADM3485EAN Thông số kỹ thuật

Product Type RS-485/RS-422 differential transceiver
Điện áp cung cấp 3.3 V
Maximum Data Rate 20 Mbps
Communication Mode Half-duplex
ESD Protection 15 kV
Standards Compliance TIA/EIA RS-422 and RS-485
Common-Mode Range Full common-mode range
Receiver Input Impedance 19 kΩ
Maximum Transceivers on Bus 19 transceivers
Driver and Receiver Enable Yes
Short-Circuit Protection Yes
Supply Class Low-power 3.3 V transceiver
Hộp 8-pin SOIC
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân ADM3485EAN 8-pin soic

Cấu hình chân cho ADM3485EAN (8-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 8-pin soic cho ADM3485EAN

Không có dữ liệu chân cụ thể sẵn có cho ADM3485EAN.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADM3485EAN phù hợp cho 6 Áp dụngs: Industrial RS-485 Automation Bus, Factory Sensor and Actuator Network, Industrial Communications Gateway, Building Automation Equipment, Test and Measurement Instrumentation, Embedded RS-485 Control Module.

🏭

Industrial RS-485 Automation Bus

The ADM3485EAN is appropriate for an industrial half-duplex RS-485 bus because it combines a 3.3 V low-power interface with a 20 Mbps maximum data rate and TIA/EIA RS-485 compliance over the full common-mode range. Its 19 kΩ receiver input impedance allows up to 19 transceivers on the bus, which supports distributed controller, sensor, and actuator nodes. The 15 kV ESD rating improves robustness at connector-adjacent equipment, although external surge protection may still be required for severe environments. Firmware should control driver and receiver enables to prevent multiple drivers from transmitting simultaneously, and the bus should use the prescribed biasing and termination arrangement.

⚡

Factory Sensor and Actuator Network

The ADM3485EAN can connect factory sensors, remote I/O modules, and actuator controllers over a shared balanced bus. Its 19 kΩ input impedance supports as many as 19 transceivers, while the 20 Mbps capability allows high-speed communication over shorter field-run distances. Half-duplex operation simplifies wiring by sharing driver and receiver paths, but firmware must enforce turnaround timing so the bus is not driven while another node transmits. Place the transceiver near the field connector, route the differential pair as a tightly coupled pair, and validate the complete network with realistic cable length, node count, common-mode offset, and termination.

🌐

Industrial Communications Gateway

The ADM3485EAN suits gateways that translate between a host processor and an RS-485 field network. A 3.3 V supply minimizes power requirements in embedded equipment, while the 20 Mbps rate provides ample bandwidth for control messages and status updates. The 19 kΩ input impedance allows a gateway to coexist with other nodes on a multipoint bus without imposing excessive loading. Driver-enable and receiver-enable signals should be controlled by the host interface to establish clear bus direction. The SOIC package also supports compact implementations, but careful ground-plane continuity and connector-side protection remain important for industrial reliability.

🧩

Building Automation Equipment

The ADM3485EAN can implement the physical layer for building automation controllers, room modules, and environmental monitoring units. Half-duplex RS-485 wiring supports economical multidrop cabling, and the low-power 3.3 V operation is useful in distributed building equipment. The 15 kV ESD protection is especially relevant when transceiver circuits are connected to field wiring, although installation transients may justify dedicated surge protection. Configure termination only at the physical ends of the bus, apply biasing consistently, and avoid long stub branches. A 20 Mbps link is best used on shorter in-building runs, with cable length and topology evaluated against the actual channel requirements.

🔧

Test and Measurement Instrumentation

The ADM3485EAN is suitable for test and measurement equipment that uses a short, high-speed balanced link between an instrument controller and remote front end. The 20 Mbps data rate supports fast command and measurement traffic, while differential signaling improves noise immunity compared with a single-ended interface. Its 19 kΩ receiver input impedance minimizes loading when several instrument modules share a bus. Keep the differential trace pair closely coupled, provide a continuous ground reference, and place the device near the connector to minimize vulnerable stub length. Where safety or severe EFT exposure is expected, add the appropriate external protection rather than relying only on the internal 15 kV ESD rating.

🔧

Embedded RS-485 Control Module

The ADM3485EAN works well in embedded control modules that expose a 3.3 V RS-485 port for motors, relays, remote I/O, or remote sensors. The low-power 3.3 V architecture supports compact embedded systems, and the 8-pin SOIC package simplifies assembly. Half-duplex control requires the firmware to arbitrate transmit and receive states, with protection against simultaneous driver activation. For reliable operation, use the manufacturer’s recommended bypass and bus components, keep the bus pair away from switching nodes, and maintain a continuous reference plane beneath the pair. The 20 Mbps capability is useful for short cabinet links but does not eliminate the need to evaluate field-cable attenuation and noise.

What is the operating voltage of ADM3485EAN?
The ADM3485EAN operates from a 3.3 V supply. According to the Analog Devices ADM3485E product page, the device is a 3.3 V low-power differential transceiver intended for balanced half-duplex transmission over multipoint buses. This supply voltage supports integration with modern 3.3 V digital systems while reducing power consumption compared with a 5 V transceiver in the same bus design.
What is the maximum data rate of ADM3485EAN?
The ADM3485EAN supports data rates up to 20 Mbps. The ADM3485E technical listing identifies the device as a 3.3 V, low-power RS-485/RS-422 transceiver for balanced multipoint communication. Although the underlying ADM3485 family is also described with a 10 Mbps option, the ADM3485EAN device data specifies 20 Mbps, so system timing and cable length should be evaluated against that higher rate.
Where can I download the ADM3485EAN datasheet PDF?
The official ADM3485E datasheet is available through the Analog Devices product page at https://www.analog.com/en/products/adm3485e.html. The manufacturer page provides the device description, technical documentation, and related resources for the ADM3485EAN family. Use the manufacturer’s pin description table when assigning PCB signals, and consult its electrical characteristics for final voltage, timing, and current limits.
Where can I find the ADM3485EAN pinout?
The ADM3485EAN pin assignment is published in the Analog Devices ADM3485E datasheet under the pin-description and package-outline sections. The device uses an 8-pin SOIC package. Assign the driver, receiver, enable, supply, and ground pins directly from the manufacturer pin table rather than inferring functions from neighboring packages, since enable polarity and no-connect details are package-specific.
What are the key specifications of ADM3485EAN that engineers should know?
The principal ADM3485EAN specifications are a 3.3 V supply, 20 Mbps maximum data rate, 15 kV ESD protection, half-duplex operation, and TIA/EIA RS-422 and RS-485 compliance. Its 19 kΩ input impedance supports up to 19 transceivers on a bus, and the device includes driver-enable, receiver-enable, and short-circuit-protection functions in an 8-pin SOIC package.
Where to buy ADM3485EAN online?
Use the Request a Quote form on this page to request ADM3485EAN availability, lot information, and a current quotation. The form is the appropriate channel for commercial inquiries because inventory and commercial terms can change rapidly. Specify the required package variant, quantity, and target date so the sourcing request can be matched to the exact ADM3485EAN ordering code.
What is the price of ADM3485EAN?
Use the Request a Quote form on this page to obtain the current ADM3485EAN price for the requested quantity. The commercial price can vary with quantity, inventory, and sourcing conditions, so a static figure would not represent the current quotation accurately. Include your required quantity, acceptable delivery date, and target packaging in the request to receive actionable supply information.
What is the lead time for ADM3485EAN?
The current lead time for ADM3485EAN should be requested through the Request a Quote form on this page. Lead time depends on the requested quantity, factory inventory, and delivery schedule, and it is not represented by a fixed product attribute. Providing your required quantity and latest acceptable arrival date enables the commercial team to return a meaningful schedule.
Is ADM3485EAN in stock?
Current ADM3485EAN stock status must be confirmed through the Request a Quote form on this page. Availability can vary by lot and order quantity, particularly for an industrial interface transceiver. Submit the exact MPN, required quantity, and target delivery date, and the sourcing team can confirm available supply and the applicable order confirmation.
ADM3485EAN vs MAX3485CPA - which is better for a 3.3V RS-485 bus?
The ADM3485EAN is the safer selection when the design requires a manufacturer-documented 3.3 V, 20 Mbps, 15 kV ESD-protected device with 19 kΩ input impedance and support for 19 bus transceivers. The MAX3485CPA is a cross-reference candidate for a pin-compatible migration, but its exact supply voltage, data rate, ESD rating, and enable behavior must be confirmed against the current manufacturer datasheet before substitution.
ADM3485EAN vs MAX3485ECPA - what is the difference?
The ADM3485EAN and MAX3485ECPA are identified by a cross-reference comparison as having consistent terminals and packages, which makes the MAX3485ECPA a potential drop-in migration candidate. The ADM3485EAN is specifically documented as a 3.3 V, 20 Mbps device with 15 kV ESD protection, 19 kΩ input impedance, and operation for up to 19 transceivers on a bus; verify those limits against the MAX3485ECPA data before release.
When should I choose ADM3485EAN over MAX3485CPA?
Choose the ADM3485EAN when the full 20 Mbps rate, 15 kV ESD protection, 19 kΩ receiver impedance, and 19-node bus capability are important system requirements. A MAX3485CPA may be considered only after its current datasheet confirms the same supply voltage, data rate, logic levels, enable polarity, package dimensions, and protection ratings. Pin-package similarity alone does not prove equivalent performance.
What can replace ADM3485EAN?
The ADM3485EANZ, ADM3485ARZ, MAX3485CPA, and MAX3485ECPA are the closest drop-in candidates identified for the 8-pin SOIC device. Suitability depends on matching the exact supply voltage, 20 Mbps data-rate requirement, ESD rating, bus impedance, enable logic, and RS-485/RS-422 electrical limits. Treat each as a qualified candidate requiring datasheet review and board-level validation.
Is ADM3485EAN suitable for industrial multipoint communication?
Yes, the ADM3485EAN fits industrial multipoint communication when its documented electrical limits satisfy the bus. It provides a 3.3 V low-power interface, 20 Mbps data rate, 15 kV ESD protection, full-range RS-422/RS-485 compliance, and 19 kΩ input impedance for up to 19 transceivers. Add suitable surge protection when the cable environment exceeds the device’s specified ESD withstand.
What is the best Analog Devices equivalent for ADM3485EAN?
The ADM3485EANZ is the closest identified Analog Devices ordering alternative because the comparison listing describes it as a complete replacement with consistent terminals, packages, performance, and functional characteristics. Confirm the exact package dimensions, temperature grade, and ordering suffix in the manufacturer documentation. The ADM3485ARZ is another same-family candidate, but its electrical and ESD configuration must also be checked.

Dữ liệu tham khảo kỹ thuật cho ADM3485EAN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ADM3485EAN for a 3.3 V half-duplex RS-485/RS-422 interface that requires up to 20 Mbps, 15 kV ESD protection, and support for as many as 19 transceivers on a bus. ADM3485EANZ is the closest same-manufacturer ordering alternative when it is documented as electrically and mechanically identical. ADM3485ARZ is appropriate only after confirming that its protection grade and operating limits satisfy the design. MAX3485CPA and MAX3485ECPA are cross-brand migration candidates with compatible terminals and packages, but their exact supply voltage, data rate, ESD rating, receiver impedance, and enable behavior must be verified. For any substitution, confirm package dimensions, logic thresholds, driver-output characteristics, receiver topology, bus-idle behavior, and protection requirements before production release.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADM3485EANZ ADM3485ARZ MAX3485CPA MAX3485ECPA
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Analog Devices Analog Devices Analog Devices Maxim Integrated Maxim Integrated

Bảo phân biệt quan trọng

  • Documented 20 Mbps maximum data rate (vsMAX3485CPA)
  • 15 kV ESD protection (vsADM3485ARZ)
  • 19-node bus capability (vsMAX3485ECPA)

Ghi chú thiết kế

Route the RS-485 differential pair as a tightly coupled pair with continuous, uninterrupted return paths. Keep the transceiver close to the connector, minimize stubs, and avoid routing the pair alongside high-current switching nodes. A solid ground reference beneath the pair improves noise immunity and reduces the likelihood that differences in trace impedance distort the differential signal.

Do not allow multiple nodes to enable their drivers simultaneously. The ADM3485EAN supports half-duplex operation, so driver-enable and receiver-enable sequencing must be controlled by the host firmware or hardware. Include adequate bus-turnaround time before asserting the driver and before interpreting received data; otherwise, a node may mistake its own transmitted signal for a response.

Use the bus topology and termination scheme appropriate for the selected RS-485 or RS-422 network. Termination belongs at the physical ends of the bus, while biasing establishes the correct idle state where required. Avoid placing unnecessary termination across every node, because excess loading can reduce signal margin. Validate the completed board with the intended cable, node count, grounding arrangement, and common-mode conditions.

The 15 kV ESD rating does not by itself define protection against every industrial surge event. Add external surge-protection devices when the cable can experience severe lightning or switching transients beyond the transceiver’s specified withstand. Select the protection network so that it does not distort the 20 Mbps edge rate or increase bus capacitance, and connect its return path to the appropriate chassis or signal-ground structure.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No definitive component-level RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified. AEC-Q100 qualification is not indicated for this interface transceiver.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

adm3485e datasheet ADM3485EAN datasheet ADM3485EAN pinout ADM3485EAN datasheet pdf ADM3485EAN 20Mbps RS-485 ADM3485EAN 15kV ESD ADM3485EAN 8-SOIC ADM3485EAN equivalent ADM3485EAN replacement ADM3485EAN vs MAX3485CPA ADM3485EAN price ADM3485EAN stock Analog Devices ADM3485EAN ADM3485EAN industrial bus

Các bộ phận và thuật ngữ liên quan

Analog Devices ADM3485EAN ADM3485EANZ ADM3485ARZ MAX3485CPA MAX3485ECPA RS-485 transceiver RS-422 transceiver differential line transceiver line driver and receiver interface IC semiconductor TIA/EIA RS-485 TIA/EIA RS-422 3.3 V power supply 20 Mbps data rate 15 kV ESD protection 19 kΩ input impedance half-duplex communication multipoint bus 8-SOIC SOIC package family surface-mount package industrial automation driver enable
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ