ADS1231ID - 24-Bit Bridge Sensor ADC | Texas Instruments
MPN: ADS1231ID ✓ Hoạt độngADS1231ID Tóm tắt
An analog-to-digital converter is an electronic component that converts a continuous analog voltage into a numeric value. Delta-sigma ADCs are a subtype of voltage-mode ADCs that use oversampling, digital filtering, and noise shaping to obtain high resolution and excellent noise performance. Within the broader semiconductor hierarchy, the ADS1231 belongs to the data-converter IC category and combines signal conditioning, conversion, and bridge excitation in one device.
The ADS1231's principal advantages include 24-bit resolution, one differential measurement channel, integrated low-noise amplification, and a programmable bridge power switch. Integrating these functions reduces the number of external signal-conditioning components required around a bridge sensor. The onboard oscillator also removes the need for a separate clock source, simplifying the analog front end while supporting compact measurement systems.
Technically, the converter uses a precision third-order 24-bit delta-sigma modulator. Its signal chain is designed for low-level sensor outputs where resolution and noise performance are more important than conversion speed. The integrated bridge power switch allows the converter to control excitation of the bridge sensor, helping coordinate sensor power and measurement settling. Because the device is optimized for a bridge front end, it provides a more integrated solution than a general-purpose low-speed ADC.
Typical uses include digital weighing scales, industrial strain-gauge instruments, portable force measurement, pressure-monitoring systems, and laboratory sensor interfaces. In a weigh-scale design, the bridge output is applied to the ADC input while the converter handles excitation, amplification, and digitization. The 24-bit resolution supports fine resolution from small differential signals, although the complete system also depends on excitation voltage, front-end filtering, mechanical stability, and calibration.
When implementing the circuit, follow the pin-description table and recommended application circuit in the manufacturer datasheet. Pay particular attention to input filtering, reference selection, digital-interface timing, and the settling period after changing data rate or amplifier settings. The 16-pin SOIC footprint also requires adequate copper and thermal consideration when the bridge supply dissipation is substantial.
This product page combines the manufacturer architecture description with package information, sourcing guidance, application-focused design notes, and a pin-compatible cross-reference assessment. It is intended to help engineers distinguish the ADS1231ID from packaging-only orderable variants and confirm whether an existing bridge-measurement board can be reused without a layout change.
Bộ thay thế dễ dàng lắp đặt cho ADS1231ID — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
ADS1231IDR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS1231ID Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 24 bit |
| Input Channel Count | 1 channel |
| Conversion Architecture | Third-order delta-sigma modulator |
| Integrated Amplifier Gain | 128 |
| Integrated Low-Noise Amplifier | Yes |
| Integrated Oscillator | Yes |
| Integrated Bridge Power Switch | Yes |
| Hộp | 16-pin SOIC |
| Kiểu lắp đặt | Surface mount |
| Primary Application | Bridge sensor measurement |
| Supported Sensor Types | Weigh scales, strain gauges, and load cells |
Hướng dẫn cấu hình chân ADS1231ID 16-pin soic
Cấu hình chân cho ADS1231ID (16-pin soic gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho ADS1231ID.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADS1231ID phù hợp cho 6 Áp dụngs: Digital Weighing Scale, Strain-Gauge Force Measurement, Industrial Pressure Sensor Interface, Portable Force Gauge, Laboratory Sensor Measurement, Medical Body-Scale Measurement.
Digital Weighing Scale
The ADS1231ID fits digital weighing scales because it combines a 24-bit converter, a gain-of-128 low-noise amplifier, an onboard oscillator, and a bridge power switch in one 16-pin SOIC. The bridge output can be conditioned and digitized without assembling a separate slow ADC, clock source, and excitation-switch subsystem. This reduces board area and component count while retaining the resolution needed for low-level load-cell signals. The practical trade-off is that the converter is optimized for a slow bridge-measurement signal path rather than rapid dynamic sampling, so mechanical vibration, filter settling, excitation stability, and calibration remain important parts of achieving accurate mass readings.
Strain-Gauge Force Measurement
The ADS1231ID is appropriate for compact strain-gauge instruments that produce a small differential output proportional to applied force. Its integrated 24-bit delta-sigma front end and gain-of-128 amplifier reduce the analog signal chain required around the sensor. The onboard oscillator provides the internal timing source, while the bridge power switch supports coordinated excitation and measurement. This integration is especially useful in portable force indicators where board area and component count matter. Measurement accuracy still depends on strain-gauge excitation sensitivity, mechanical stress isolation, analog filtering, input-referred noise, and a calibration routine that accounts for offset, gain, and temperature drift.
Industrial Pressure Sensor Interface
The ADS1231ID can serve as the acquisition IC in a bridge-based industrial pressure sensor interface because it accepts one differential measurement channel and performs amplification, conversion, and bridge excitation control in a single package. The 24-bit resolution is useful when pressure changes produce small differential voltages across a strain-gauge bridge. Integrating the bridge switch and oscillator reduces external support circuitry compared with a discrete low-noise ADC design. For dependable factory operation, the circuit should use stable excitation, filtering appropriate to the required bandwidth, protection against sensor wiring transients, and calibration performed across the operating temperature range.
Portable Force Gauge
The ADS1231ID supports portable force-gauge products by combining low-noise analog conditioning with 24-bit digitization in a 16-pin SOIC. This allows a battery-powered instrument to preserve a compact layout while deriving a digital measurement from a bridge sensor. The integrated bridge power switch can coordinate excitation, and the onboard oscillator avoids an external clock component. Designers should still budget carefully for regulator efficiency, low-noise reference behavior, startup settling, and display-update rate. For handheld products, the converter's low-speed measurement character is generally appropriate because quasi-static force readings do not require high-rate sampling.
Laboratory Sensor Measurement
The ADS1231ID is useful in laboratory instrumentation intended to resolve small outputs from resistive bridges, strain gauges, or load cells. Its 24-bit resolution, gain-of-128 amplifier, and third-order delta-sigma modulator favor precision-oriented measurements rather than waveform acquisition. The integrated bridge switch and oscillator simplify a repeatable analog front end, which can benefit prototype instrumentation and automated test fixtures. A practical implementation should follow the manufacturer application circuit, provide a low-noise reference and supply arrangement, allow adequate settling after configuration changes, and separate sensitive input routing from digital return currents.
Medical Body-Scale Measurement
The ADS1231ID can support body-scale and related force-measurement electronics when the selected medical load cell provides a bridge output. The 24-bit conversion resolution preserves small differential changes while the integrated amplifier, oscillator, and bridge switch reduce the size of the analog front end. A medical design still needs dedicated consideration of electrical isolation, creepage and clearance, patient-contact protection, electromagnetic interference, calibration, and regulatory validation. The ADS1231ID's stated 24-bit capability is only one part of the measurement chain; mechanical stability, excitation accuracy, noise, filtering, and traceable calibration determine the final performance of the scale.
Dữ liệu tham khảo kỹ thuật cho ADS1231ID — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADS1231IDR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 16-SOIC | 16-SOIC |
| Resolution | 24 bit | 24 bit |
| Input Channel Count | 1 channel | 1 channel |
| Conversion Architecture | Third-order delta-sigma modulator | Third-order delta-sigma modulator |
| Integrated Amplifier Gain | 128 | 128 |
| Bridge Power Switch | Integrated | Integrated |
| Onboard Oscillator | Yes | Yes |
Bảo phân biệt quan trọng
- Integrated bridge-measurement front end (vsADS1231IDR)
- Same 16-SOIC PCB footprint (vsADS1231IDR)
- Dedicated low-level sensor architecture (vsGeneric 24-bit ADC)
Ghi chú thiết kế
Use the recommended application circuit and pin-description table from the Texas Instruments ADS1231 datasheet when assigning the analog and digital interfaces. Keep the bridge-sensor connection short and place the input network close to the converter to minimize induced noise. Route the serial interface away from sensitive bridge inputs, provide a stable ground reference, and follow the package land pattern so the 16-pin SOIC footprint remains compatible with ADS1231IDR.
The bridge power switch can contribute significant dissipation because the excitation current flows through sensor and interconnect resistance. Estimated: bridge dissipation is approximately the square of excitation current multiplied by total bridge resistance; calculate this value with the selected sensor's excitation current and measured bridge impedance before choosing the regulator and copper area. Confirm the resulting junction temperature and supply headroom against the manufacturer operating limits.
Do not assume that 24-bit nominal resolution equals 24-bit usable accuracy. Noise, reference-voltage variation, excitation drift, analog filtering, bridge imbalance, conversion settling, and calibration error can reduce real measurement precision. Configure the data rate and amplifier gain according to the manufacturer's procedure, allow the output to settle after configuration changes, and validate the complete scale or sensor system rather than relying only on the converter's bit depth.
Separate the bridge excitation path from the sensitive differential input return as far as practical, and avoid routing digital clock or serial signals beneath the analog input network. Use a low-noise, stable reference and supply arrangement because the converter's bridge-measurement performance is influenced by the complete analog chain. Follow the datasheet grounding and layout guidance rather than treating the ADS1231ID as a standalone high-resolution ADC.
Thông tin tuân thủ
No explicit ADS1231ID RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated in the current product information. Confirm the exact orderable part with current manufacturer compliance documentation.