Texas Instruments

ADS7861EB - Dual 500kHz 12-Bit Simultaneous ADC | TI

MPN: ADS7861EB ✓ Hoạt động
SSOP-24 (DBQ) Package
MOQ: 1 |

ADS7861EB Tóm tắt

Texas Instruments ADS7861EB is a dual, 500 kHz, 12-bit, 2+2-channel simultaneous-sampling analog-to-digital converter with four fully differential inputs in a 24-pin SSOP (DBQ) package. It converts each differential input pair to a 12-bit result, supports simultaneous acquisition, and provides a dual serial interface with dedicated control inputs.

An ADC is a data-acquisition IC that converts an analog voltage into a digital number for processing, storage, or transmission. The ADS7861EB belongs to the successive-approximation ADC family and sits within the broader hierarchy of data converters, interface ICs, signal-chain semiconductors, and power-management-aware embedded systems. Its four differential channels are grouped into two pairs, allowing related voltages to be captured at the same time rather than sequentially.

The device combines a 12-bit conversion resolution with an aggregate throughput of 500 kSPS. Its two SAR converters use a dual serial interface and control inputs to reduce software overhead. Each channel produces a 12-bit word, while the differential input arrangement supports direct measurement of signals centered around a common reference. The 24-pin SSOP package provides a compact option for established through-hole-compatible board assembly.

The architecture is organized around simultaneous sampling rather than a single-input multiplexer. Two converter channels acquire simultaneously, and the four differential inputs form two matched channel groups. This arrangement is useful when relationships between paired signals must be preserved, such as voltage and current sensing, bridge excitation measurements, or phase-aware control loops. The Texas Instruments ADS7861 datasheet specifies operation across a -40°C to +125°C temperature range.

Typical uses include industrial process monitoring, motor and power-system instrumentation, communications equipment, data-acquisition modules, and embedded control systems. Simultaneous sampling is particularly useful when the time relationship between two input pairs carries useful information. The 500 kSPS throughput supports rapidly changing waveforms while the 12-bit result provides 4,096 digital codes for each conversion.

PCB implementation requires careful attention to analog signal routing, reference stability, input bandwidth, and digital-interface timing. Differential traces should be kept short and appropriately coupled, while the reference and supply networks should be decoupled near the device. Verify the pin-description table, input common-mode limits, and acquisition timing in the manufacturer datasheet before finalizing signal-conditioning and grounding.

This page combines the manufacturer product information, datasheet characteristics, ordering information, application guidance, and compatible replacement analysis to support faster component evaluation and PCB design. It also identifies which electrical and mechanical details require confirmation in the current manufacturer documentation before production release.

Bộ thay thế dễ dàng lắp đặt cho ADS7861EB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

ADS7861E/2K5

✅ Drop-In
📦 SSOP-24 (DBQ)
Same 12-bit resolution and 500 kSPS performance; ordering suffix differs by 0% in the stated core electrical parameters

📋 Tham chiếu thay thế (không có trong danh mục)

ADS7861EB/2K5

✅ Drop-In
📦 SSOP-24 (DBQ)
Same 12-bit, 500 kSPS, four-channel device; ordering suffix changes the reel quantity from the base ADS7861EB by 0% in electrical performance

📋 Tham chiếu thay thế (không có trong danh mục)

ADS7861EB/2K5G4

✅ Drop-In
📦 SSOP-24 (DBQ)
Same 12-bit, 500 kSPS and four-channel performance; green ordering suffix changes no stated core electrical parameter

📋 Tham chiếu thay thế (không có trong danh mục)

ADS7861E/2K5G4

✅ Drop-In
📦 SSOP-24 (DBQ)
Same 12-bit, 500 kSPS, four-channel performance; base and green suffix differences cause no stated electrical deviation

📋 Tham chiếu thay thế (không có trong danh mục)

ADS7861EB Tỷ lệ tối đa & tính chất điện

Converter Type Successive-approximation ADC
Architecture Dual, 2+2 channels
Sampling Mode Simultaneous sampling
Độ phân giải 12 bit
Total Conversion Throughput 500 kSPS
Analog Input Channels 4 channels
Input Configuration 4 fully differential inputs
Input Channel Grouping 2 pairs
Output Word Length 12 bit per channel
Serial Interface Dual serial interface
Control Interface Dedicated control inputs
Hộp SSOP-24 (DBQ)
Số chân 24 pins
Khoảng nhiệt độ hoạt động -40°C to +125°C

Hướng dẫn cấu hình chân ADS7861EB ssop-24 (dbq)

Cấu hình chân cho ADS7861EB (ssop-24 (dbq) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân ssop-24 (dbq) cho ADS7861EB

Không có dữ liệu chân cụ thể sẵn có cho ADS7861EB.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADS7861EB phù hợp cho 6 Áp dụngs: Industrial Process Monitoring, Motor Drive Current and Voltage Sensing, Power-System Instrumentation, Communications and Baseband Monitoring, Data Acquisition Modules, Precision Control and Instrumentation.

🏭

Industrial Process Monitoring

The ADS7861EB fits industrial measurement systems that acquire two related differential signals at the same time. Its two simultaneous-sampling converter groups support paired voltage measurements without the timing offset that can occur with sequential multiplexing, while 12-bit resolution provides 4,096 codes per result. The 500 kSPS throughput handles rapidly changing process variables, and the -40°C to +125°C operating range supports industrial equipment. Use differential front ends for sensors whose outputs exceed the ADC input range, maintain a stable reference, and route the dual serial interface to the controller without introducing long, unbalanced digital traces.

⚡

Motor Drive Current and Voltage Sensing

The ADS7861EB is suitable for motor-control systems that monitor paired feedback quantities such as phase voltage and shunt current. Simultaneous conversion of the two channel pairs helps preserve timing information when the controller evaluates motor phase, current magnitude, or system response. The 12-bit, 500 kSPS converter supports fast feedback loops, while four fully differential inputs reduce sensitivity to common-mode noise when appropriately conditioned. Design the analog front end around the ADC's input common-mode and reference requirements, and verify the final current and voltage scaling against the motor-drive timing budget.

🔌

Power-System Instrumentation

The ADS7861EB can serve as the acquisition device in power-monitoring and energy-instrumentation modules that measure several related bipolar or differential signals. Its two ADC sections support simultaneous acquisition, which is useful when comparing voltage and current waveforms or paired sensor outputs. At 500 kSPS, the converter can sample dynamic events while retaining a straightforward 12-bit output format for digital filtering and protection algorithms. The four differential inputs help isolate the measurement path from common-mode noise, but accurate results still depend on front-end scaling, input filtering, reference quality, and calibration.

🌐

Communications and Baseband Monitoring

The ADS7861EB fits communications equipment that needs compact, multi-channel observation of differential baseband or IF-related signals. Simultaneous sampling is valuable for calibration, gain monitoring, and feedback loops where two measured quantities must share a common time reference. The 500 kSPS sampling capability accommodates higher-bandwidth supervisory signals, while the 12-bit resolution is suitable for many control and diagnostic functions. Keep the high-frequency analog paths short, control impedance consistently, and separate sensitive input routing from serial clock and data lines to preserve signal integrity.

📊

Data Acquisition Modules

The ADS7861EB is appropriate for compact data-acquisition modules requiring four differential channels rather than a multiplexed single-channel converter. The dual converter arrangement supports two pairs of simultaneous samples, giving each pair a shared acquisition instant, while 500 kSPS throughput provides useful temporal resolution. The 24-pin SSOP package also fits established SSOP board layouts. A practical implementation should expose the serial interface efficiently, use local reference and supply decoupling, and define calibration for gain and offset after the complete analog signal chain is assembled.

⚙️

Precision Control and Instrumentation

The ADS7861EB can be used in precision instrumentation where paired sensor outputs, feedback signals, or diagnostic channels must be observed together. Simultaneous acquisition removes the inter-channel update uncertainty associated with multiplexed conversion, and the 12-bit result width gives 4,096 discrete codes for each 12-bit conversion. The dual serial interface provides a compact connection to embedded control logic, while the broad -40°C to +125°C specification supports demanding equipment. Front-end design should establish compatible signal levels, provide low-noise references, and include filtering that prevents out-of-band content from affecting acquisition accuracy.

What is ADS7861EB?
The ADS7861EB is a dual, 500 kSPS, 12-bit simultaneous-sampling ADC with four fully differential input channels organized as two pairs. According to the Texas Instruments ADS7861 datasheet, each converter produces a 12-bit word and the device is available in a 24-pin SSOP (DBQ) package for industrial and embedded acquisition systems.
How many channels and bits does ADS7861EB have?
The ADS7861EB provides four fully differential analog input channels and 12-bit conversion results. The Texas Instruments product page describes the device as a dual, 2+2-channel converter, meaning the four inputs are divided into two simultaneously sampled pairs rather than selected sequentially through one input multiplexer.
What is the sampling rate of ADS7861EB?
The ADS7861EB supports an aggregate conversion throughput of 500 kSPS while using two successive-approximation converter channels. According to the Texas Instruments ADS7861 datasheet, simultaneous sampling allows both converter groups to capture their assigned input pairs at the same time, which is valuable for preserving phase relationships in fast-varying signals.
Where can I download the ADS7861EB datasheet PDF?
The official ADS7861EB datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads7861.pdf. It contains the electrical characteristics, pin descriptions, interface timing, application information, and ordering details for the SSOP-24 DBQ package.
Where is the ADS7861EB pinout and what package does it use?
The ADS7861EB uses a 24-pin SSOP package identified as DBQ. Texas Instruments lists the part in a 24-pin SSOP configuration, while the manufacturer datasheet contains the authoritative pin-description table and connection diagrams. Use that table to map analog inputs, references, supplies, control inputs, and serial-interface signals onto the PCB.
What are the key specifications engineers should know about ADS7861EB?
The principal ADS7861EB specifications are 12-bit resolution, 500 kSPS throughput, four fully differential inputs, two simultaneously sampled channel pairs, a dual serial interface, and operation from -40°C to +125°C. These characteristics place it between general-purpose multiplexed ADCs and higher-cost simultaneous-sampling converters for designs that must capture related signals concurrently.
When should I choose ADS7861EB for simultaneous sampling?
Choose the ADS7861EB when two related analog signals must be measured at the same instant and a 12-bit, 500 kSPS result is sufficient. Its differential inputs fit paired voltage measurements, bridge sensors, current-shunt measurements, and phase-sensitive control loops. It is especially useful when sequential multiplexing would introduce timing uncertainty between the paired signals.
What is the difference between ADS7861EB and ADS7861E/2K5?
The ADS7861E/2K5 is identified as a parametric equivalent to ADS7861EB and retains the core 12-bit, 500 kSPS, four-channel simultaneous-sampling function. The ordering suffix differences identify the particular package and shipment configuration, so engineers should confirm the exact pin arrangement and ordering code before treating one as a replacement for the other.
Can ADS7861E/2K5 replace ADS7861EB?
The ADS7861E/2K5 can be considered a drop-in candidate because it is listed as a parametric equivalent and uses the same 24-pin SSOP configuration as the ADS7861EB. Before substitution, verify ordering details, temperature grade, absolute maximum ratings, interface timing, reference requirements, and pin names against the manufacturer datasheet for both devices.
Is there a cross-brand drop-in replacement for ADS7861EB?
No verified cross-brand, pin-compatible replacement is established for the ADS7861EB from the available manufacturer and component cross-reference information. The documented substitutes are from the Texas Instruments ADS7861 family. A different manufacturer's converter should not be treated as drop-in unless its package, pin map, serial protocol, reference voltage, acquisition timing, and analog performance are independently verified.
Where can I buy ADS7861EB and check current lead time?
Use the Request a Quote form on this page to request ADS7861EB pricing, current stock confirmation, minimum order quantity, and manufacturing lead time. The manufacturer part page identifies ADS7861EB as the 24-pin SSOP DBQ ordering option, while the quote form provides current commercial terms without embedding a stale price or availability claim.
What is the current price of ADS7861EB?
The current price for ADS7861EB is best obtained through the Request a Quote form on this page because pricing depends on order quantity, sourcing volume, and market conditions. The structured pricing area updates from current commercial records, while the form allows a buyer to request a binding quotation for the exact 24-pin SSOP DBQ ordering code.
How long is the lead time for ADS7861EB?
Request the current ADS7861EB lead time through the Request a Quote form on this page. Texas Instruments identifies ADS7861EB as a 24-pin SSOP DBQ device, but current manufacturing capacity, order volume, packaging configuration, and shipment destination determine the applicable lead time and minimum order quantity.
Is ADS7861EB suitable for industrial temperature environments?
Yes, the ADS7861EB is specified by Texas Instruments for operation from -40°C to +125°C. According to the ADS7861 datasheet, the SSOP-24 version is fully specified across that temperature range, making it suitable for industrial equipment where operating conditions exceed typical commercial-room assumptions.
Does ADS7861EB meet RoHS and REACH requirements?
The manufacturer product and ordering pages should be checked for the current material-compliance declaration associated with the exact ADS7861EB order code. RoHS and REACH status are not included in the numeric device characterization, and the manufacturer may present the declarations through separate compliance documentation rather than in the main datasheet.

Dữ liệu tham khảo kỹ thuật cho ADS7861EB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ADS7861EB when the design requires four fully differential inputs, two simultaneously sampled pairs, 12-bit conversion results, and 500 kSPS throughput in a 24-pin SSOP DBQ footprint. The documented ADS7861E/2K5, ADS7861EB/2K5, ADS7861EB/2K5G4, and ADS7861E/2K5G4 order codes preserve the same core conversion function and package, making them suitable candidates when sourcing or assembly requirements favor a particular ordering configuration. Confirm the exact package, temperature grade, shipment format, and pin map for every proposed substitution. Do not use a QFN version as a drop-in replacement for the SSOP footprint without redesigning the PCB. A different manufacturer's ADC should be selected only after its differential input range, reference voltage, serial protocol, acquisition timing, conversion latency, and pin mapping have been verified against the system requirements.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADS7861E/2K5 ADS7861EB/2K5 ADS7861EB/2K5G4 ADS7861E/2K5G4
Package SSOP-24 (DBQ) SSOP-24 (DBQ) SSOP-24 (DBQ) SSOP-24 (DBQ) SSOP-24 (DBQ)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit
Sampling Throughput 500 kSPS 500 kSPS 500 kSPS 500 kSPS 500 kSPS
Input Channels 4 fully differential channels 4 fully differential channels 4 fully differential channels 4 fully differential channels 4 fully differential channels
Sampling Mode Simultaneous sampling Simultaneous sampling Simultaneous sampling Simultaneous sampling Simultaneous sampling
Serial Interface Dual serial interface Dual serial interface Dual serial interface Dual serial interface Dual serial interface
Converter Architecture Dual, 2+2 channels Dual, 2+2 channels Dual, 2+2 channels Dual, 2+2 channels Dual, 2+2 channels

Bảo phân biệt quan trọng

  • Simultaneous acquisition of two channel pairs (vsADS7861E/2K5)
  • Four fully differential inputs without external multiplexing (vsADS7861EB/2K5)
  • 500 kSPS throughput in a 24-pin SSOP (vsADS7861EB/2K5G4)

Ghi chú thiết kế

Route each differential input as a closely coupled pair to minimize conversion of common-mode noise into differential error. Keep analog traces short, avoid long loops around the device, and place input and reference components near their associated pins. Confirm the physical pin assignments in the manufacturer pin-description table before fixing the PCB footprint, particularly for the SSOP-24 DBQ variant.

Separate the dual serial clock and data routes from sensitive analog inputs and use a quiet reference return path. Because simultaneous sampling is a principal benefit of the ADS7861EB, preserve matched routing lengths within each differential pair and avoid introducing unequal propagation delays. Validate the complete interface timing against the controller clock and the acquisition period specified in the datasheet.

Use dedicated supply and reference-decoupling networks close to the device, and confirm the permitted analog and digital supply ranges in the manufacturer datasheet. Reference stability directly affects the conversion scale, while supply noise can reduce the usable noise performance of a 12-bit converter. Grounding and decoupling should follow the datasheet application guidance rather than relying on a generic high-frequency-capacitor arrangement.

Do not treat an ordering-suffix substitution as interchangeable until the package code, temperature grade, pin names, and shipment configuration have been checked. The ADS7861 family includes multiple order codes, including SSOP-24 variants, and QFN options are also available for the device family. Any replacement must preserve the 24-pin DBQ footprint and the required electrical and timing characteristics.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Material-compliance declarations were not included in the available manufacturer product or datasheet excerpts. Confirm the current declarations for the exact ADS7861EB ordering code before production release.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADS7861EB datasheet ADS7861EB datasheet pdf ADS7861EB pinout ADS7861EB SSOP-24 Texas Instruments ADS7861EB ADS7861EB 12-bit ADC ADS7861EB 500 kSPS ADS7861EB simultaneous sampling ADS7861EB equivalent ADS7861EB replacement ADS7861EB price ADS7861EB stock

Các bộ phận và thuật ngữ liên quan

Texas Instruments ADS7861 ADS7861EB ADS7861E/2K5 ADS7861EB/2K5 ADS7861EB/2K5G4 ADS7861E/2K5G4 ADC analog-to-digital converter successive-approximation ADC SAR simultaneous sampling differential input dual serial interface 12-bit resolution 500 kSPS data acquisition industrial process monitoring motor control power-system instrumentation SSOP-24 DBQ package surface mount embedded control
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ