ADS8509IDW - 16-Bit 250-kSPS SAR ADC | Texas Instruments
MPN: ADS8509IDW ✓ Hoạt độngADS8509IDW Tóm tắt
An ADC is an analog-to-digital converter, a semiconductor that transforms a continuously varying analog voltage into a numeric code for processing, measurement, or control. The ADS8509 belongs to the SAR ADC family within the broader data-converter and signal-processing hierarchy. Its internal sample-and-hold circuit, capacitor-based conversion core, voltage reference, clock, and serial interface provide a complete conversion solution for bipolar industrial signals.
The primary conversion characteristics are 16-bit resolution and a 250-kSPS throughput. The ADC supports three programmable input ranges, allowing the same device to measure signals spanning ±3.3 V, ±5 V, or ±10 V. Serial data can be clocked by the internal converter clock or synchronized to an external data clock, which provides flexibility in systems where the host controller controls the conversion timing.
Internally, the ADS8509 uses a capacitor-based SAR architecture. Each conversion compares the sampled input against an internal DAC through a sequence of comparator decisions, progressively determining the 16-bit result. This approach provides predictable sampling behavior without the complexity of a pipeline architecture. The serial interface reduces the number of signal connections required for a high-resolution converter and is suitable for communicating with microcontrollers and digital signal processors.
Typical applications include industrial process-control instrumentation, programmable logic controllers, data acquisition modules, factory automation equipment, and embedded measurement systems. The wide bipolar input ranges are particularly useful for sensors and transducers that operate around ground, such as pressure, temperature, current, and bridge-sensor front ends.
The 20-pin SOIC footprint requires careful analog layout. Keep the analog input, reference, and ground connections short, place required bypass capacitors close to their associated pins, and route serial interface traces away from sensitive input nodes. Verify the reference, supply, and input network against the manufacturer datasheet before applying the full ±10 V range.
This page combines the key ADS8509IDW specifications, verified same-footprint replacement information, application guidance, and side-by-side engineering comparisons. It is designed to help designers determine whether the converter’s resolution, sampling rate, input range, and serial architecture fit a specific acquisition or industrial-control design.
Bộ thay thế dễ dàng lắp đặt cho ADS8509IDW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS8509IDW (cùng hình factor và footprint) — khác nhau ở Architecture, Package, Resolution, Mounting Type, Operating Temperature.
ADS8509IBDW
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS8509IDW Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 16 bit |
| Conversion Rate | 250 kSPS |
| Channel Count | 1 channel |
| Architecture | Successive-approximation register (SAR) |
| Input Range Option 1 | ±10 V |
| Input Range Option 2 | ±5 V |
| Input Range Option 3 | ±3.3 V |
| Serial Interface | SPI-compatible serial interface |
| Internal Conversion Clock | Supported |
| External Data Clock | Supported for synchronized data output |
| Input Circuit | Capacitor-based 16-bit SAR with sample-and-hold |
| Integrated Functions | Sample-and-hold, reference, clock, and serial data interface |
| Process Technology | CMOS |
| Hộp | 20-pin SOIC |
| Kiểu lắp đặt | Surface mount |
| Datasheet Length | 35 pages |
Hướng dẫn cấu hình chân ADS8509IDW 20-pin soic
Cấu hình chân cho ADS8509IDW (20-pin soic gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho ADS8509IDW.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADS8509IDW phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Programmable Logic Controller Input, Data Acquisition Module, Factory Automation Sensor Interface, Precision Analog Control Loop, Embedded Measurement and Monitoring.
Industrial Process Measurement
The ADS8509IDW fits bipolar process instrumentation because it provides 16-bit resolution, a 250-kSPS conversion rate, and selectable ±10 V, ±5 V, or ±3.3 V input ranges. It can digitize pressure, level, flow, and position transducer signals centered around ground without requiring a bipolar converter with a different channel count. The SAR architecture supports deterministic acquisition, while the serial interface reduces the digital connection count. The input network must include suitable protection and conditioning, and the reference and bypass components should follow the manufacturer application guidance.
Được đề xuất
Programmable Logic Controller Input
The ADS8509IDW is appropriate for a PLC or embedded automation controller that must acquire one bipolar analog channel at high enough speed for supervisory control. Its 16-bit result supports fine process resolution, while 250 kSPS is more than adequate for many temperature, pressure, and actuator-feedback loops. The three selectable input ranges simplify scaling across different field signals. External-clock operation can synchronize conversions with a controller, and the serial interface keeps the PCB compact, although an industrial input module still needs isolation, surge protection, and calibration to meet its safety requirements.
Được đề xuất
Data Acquisition Module
A compact data acquisition module can use the ADS8509IDW for a 16-bit bipolar measurement channel at 250 kSPS. This capability suits waveform capture, laboratory instrumentation, and production-test equipment where a single analog signal must be digitized with predictable timing. The converter's internal sample-and-hold stage, reference, and serial interface reduce the required external circuitry, while selectable ±10 V, ±5 V, and ±3.3 V ranges improve board reuse. Designers should preserve short analog routes, use a quiet reference implementation, and verify acquisition timing before choosing the external clock mode.
Được đề xuất
Factory Automation Sensor Interface
The ADS8509IDW supports factory automation sensor interfaces that receive bipolar voltages from controllers, transducers, and analog signal-conditioning networks. A 16-bit conversion provides detailed process visibility, and 250 kSPS allows the controller to sample rapid events without moving to a more complex high-speed converter architecture. The 20-pin SOIC package is practical for compact controller boards, and the internal or external clock choices provide flexibility in deterministic acquisition systems. Field-side protection, grounding, calibration, and environmental isolation remain system-level requirements rather than functions supplied by the ADC.
Được đề xuất
Precision Analog Control Loop
The ADS8509IDW can serve as the measurement element in a precision analog control loop where the controller compares a bipolar feedback signal against a commanded value. Sixteen-bit resolution improves visibility of small errors, while the 250-kSPS SAR conversion rate supports prompt feedback for position, level, or actuator systems. Select the ±3.3 V range for tightly coupled electronics or the ±5 V or ±10 V range for wider field signals. The system should account for acquisition delay, reference accuracy, analog-filter delay, and controller timing because converter resolution alone does not determine closed-loop accuracy.
Được đề xuất
Embedded Measurement and Monitoring
The ADS8509IDW fits embedded measurement systems that need more resolution than a basic 12-bit control ADC while retaining a straightforward serial interface. At 250 kSPS, it can sample sensor values and transient analog events for diagnostics, condition monitoring, or automated test. The integrated sample-and-hold, reference, clock, and data interface reduce external component count, and the selectable bipolar ranges accommodate different sensor outputs. Designers should confirm the power-supply requirement and operating-temperature grade, then isolate sensitive reference routing from switching and serial clock signals to preserve conversion quality.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADS8509IDW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADS8509IBDW |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 20-pin SOIC | 20-pin SOIC |
| Resolution | 16 bit | 16 bit |
| Conversion Rate | 250 kSPS | 250 kSPS |
| Channel Count | 1 channel | 1 channel |
| Architecture | Successive-approximation register (SAR) | Successive-approximation register (SAR) |
| Input Ranges | ±10 V, ±5 V, and ±3.3 V | ±10 V, ±5 V, and ±3.3 V |
| Digital Interface | SPI-compatible serial interface | SPI-compatible serial interface |
| Clocking | Internal clock or external data-clock synchronization | Internal clock or external data-clock synchronization |
| Grade Suffix | IDW | IBDW |
Bảo phân biệt quan trọng
- High-resolution conversion in a compact single-channel package (vsADS8509IBDW)
- Three programmable bipolar measurement ranges (vsADS8509IBDW)
- Flexible acquisition timing (vsADS8509IBDW)
Ghi chú thiết kế
Keep the analog input, reference, and analog-ground paths short and place required bypass capacitors close to their associated pins according to the Texas Instruments ADS8509 datasheet. Route SPI clock and data signals away from the input and reference nodes. Because the converter uses a 20-pin SOIC package, careful top-layer placement is important for preserving the full 16-bit conversion performance.
Do not treat the ±10 V, ±5 V, and ±3.3 V input-range selections as interchangeable without reviewing the corresponding internal configuration and external input network. Confirm the selected range, reference voltage, pin connections, and maximum input excursion in the device documentation. Incorrect range or signal conditioning can overload the input path or reduce measurement accuracy even when the ADC operates at its nominal 250-kSPS rate.
Use the internal conversion clock for a straightforward standalone acquisition path, or select external-clock synchronization when the host must control serial transfer timing. In either case, account for the complete conversion time, serial data framing, and settling interval in the acquisition timing budget. Avoid allowing clock edges and fast serial transitions to couple into the reference or analog-input traces.
Thông tin tuân thủ
The manufacturer product page and distributor excerpts do not provide explicit compliance statements for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance.