Texas Instruments

ADS8509IDW - 16-Bit 250-kSPS SAR ADC | Texas Instruments

MPN: ADS8509IDW ✓ פעיל
20-pin SOIC Package Supported Speed
כמות הזמנה מינימלית: 1 |

ADS8509IDW סקירה

The Texas Instruments ADS8509IDW is a 16-bit, single-channel successive-approximation register ADC with a 250-kSPS conversion rate, programmable differential input ranges of ±10 V, ±5 V, and ±3.3 V, and an SPI-compatible serial interface in a 20-pin SOIC package.

An ADC is an analog-to-digital converter, a semiconductor that transforms a continuously varying analog voltage into a numeric code for processing, measurement, or control. The ADS8509 belongs to the SAR ADC family within the broader data-converter and signal-processing hierarchy. Its internal sample-and-hold circuit, capacitor-based conversion core, voltage reference, clock, and serial interface provide a complete conversion solution for bipolar industrial signals.

The primary conversion characteristics are 16-bit resolution and a 250-kSPS throughput. The ADC supports three programmable input ranges, allowing the same device to measure signals spanning ±3.3 V, ±5 V, or ±10 V. Serial data can be clocked by the internal converter clock or synchronized to an external data clock, which provides flexibility in systems where the host controller controls the conversion timing.

Internally, the ADS8509 uses a capacitor-based SAR architecture. Each conversion compares the sampled input against an internal DAC through a sequence of comparator decisions, progressively determining the 16-bit result. This approach provides predictable sampling behavior without the complexity of a pipeline architecture. The serial interface reduces the number of signal connections required for a high-resolution converter and is suitable for communicating with microcontrollers and digital signal processors.

Typical applications include industrial process-control instrumentation, programmable logic controllers, data acquisition modules, factory automation equipment, and embedded measurement systems. The wide bipolar input ranges are particularly useful for sensors and transducers that operate around ground, such as pressure, temperature, current, and bridge-sensor front ends.

The 20-pin SOIC footprint requires careful analog layout. Keep the analog input, reference, and ground connections short, place required bypass capacitors close to their associated pins, and route serial interface traces away from sensitive input nodes. Verify the reference, supply, and input network against the manufacturer datasheet before applying the full ±10 V range.

This page combines the key ADS8509IDW specifications, verified same-footprint replacement information, application guidance, and side-by-side engineering comparisons. It is designed to help designers determine whether the converter’s resolution, sampling rate, input range, and serial architecture fit a specific acquisition or industrial-control design.

חלופות תחליף ישיר עבור ADS8509IDW — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ADS8509IDW (אותו גורם צורה וטביעת רגל) — שונים ב Architecture, Package, Resolution, Mounting Type, Operating Temperature.

Texas Instruments
Architecture: SAR (Successive Approximation)
Package: 16-pin PDIP (0.300 inch, 7.62 mm)
Resolution: 16 bits
השווה עם ADS8509IDW →
Texas Instruments
Architecture: Capacitor-based 16-bit SAR A/D
Package: 16-pin SOIC, DW package
השווה עם ADS8509IDW →
Texas Instruments
Architecture: SAR (Successive Approximation Register)
Package: 20-SOIC (DW), wide-body, green (RoHS)
Resolution: 12 bit
השווה עם ADS8509IDW →

ADS8509IBDW

✅ Drop-In
📦 20-pin SOIC
Same 16-bit, 250-kSPS SAR converter and 20-pin SOIC footprint; the grade suffix differs, so temperature coverage and qualification must be checked.

📋 חלופה להתייחסות (לא בקטלוג)

ADS8509IDW דירוגים מרביים ומאפיינים חשמליים

רזולוציה 16 bit
Conversion Rate 250 kSPS
Channel Count 1 channel
Architecture Successive-approximation register (SAR)
Input Range Option 1 ±10 V
Input Range Option 2 ±5 V
Input Range Option 3 ±3.3 V
Serial Interface SPI-compatible serial interface
Internal Conversion Clock Supported
External Data Clock Supported for synchronized data output
Input Circuit Capacitor-based 16-bit SAR with sample-and-hold
Integrated Functions Sample-and-hold, reference, clock, and serial data interface
Process Technology CMOS
מארז 20-pin SOIC
סוג הרכבה Surface mount
Datasheet Length 35 pages

מדריך תצורת פינים של ADS8509IDW 20-pin soic

תצורת פינים עבור ADS8509IDW (מארזת 20-pin soic). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 20-pin soic עבור ADS8509IDW

אין נתוני פריסת פינים מפורטים עבור ADS8509IDW.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADS8509IDW מתאים עבור 6 יישוםs: Industrial Process Measurement, Programmable Logic Controller Input, Data Acquisition Module, Factory Automation Sensor Interface, Precision Analog Control Loop, Embedded Measurement and Monitoring.

🏭

Industrial Process Measurement

The ADS8509IDW fits bipolar process instrumentation because it provides 16-bit resolution, a 250-kSPS conversion rate, and selectable ±10 V, ±5 V, or ±3.3 V input ranges. It can digitize pressure, level, flow, and position transducer signals centered around ground without requiring a bipolar converter with a different channel count. The SAR architecture supports deterministic acquisition, while the serial interface reduces the digital connection count. The input network must include suitable protection and conditioning, and the reference and bypass components should follow the manufacturer application guidance.

⚡

Programmable Logic Controller Input

The ADS8509IDW is appropriate for a PLC or embedded automation controller that must acquire one bipolar analog channel at high enough speed for supervisory control. Its 16-bit result supports fine process resolution, while 250 kSPS is more than adequate for many temperature, pressure, and actuator-feedback loops. The three selectable input ranges simplify scaling across different field signals. External-clock operation can synchronize conversions with a controller, and the serial interface keeps the PCB compact, although an industrial input module still needs isolation, surge protection, and calibration to meet its safety requirements.

📟

Data Acquisition Module

A compact data acquisition module can use the ADS8509IDW for a 16-bit bipolar measurement channel at 250 kSPS. This capability suits waveform capture, laboratory instrumentation, and production-test equipment where a single analog signal must be digitized with predictable timing. The converter's internal sample-and-hold stage, reference, and serial interface reduce the required external circuitry, while selectable ±10 V, ±5 V, and ±3.3 V ranges improve board reuse. Designers should preserve short analog routes, use a quiet reference implementation, and verify acquisition timing before choosing the external clock mode.

🤖

Factory Automation Sensor Interface

The ADS8509IDW supports factory automation sensor interfaces that receive bipolar voltages from controllers, transducers, and analog signal-conditioning networks. A 16-bit conversion provides detailed process visibility, and 250 kSPS allows the controller to sample rapid events without moving to a more complex high-speed converter architecture. The 20-pin SOIC package is practical for compact controller boards, and the internal or external clock choices provide flexibility in deterministic acquisition systems. Field-side protection, grounding, calibration, and environmental isolation remain system-level requirements rather than functions supplied by the ADC.

🔧

Precision Analog Control Loop

The ADS8509IDW can serve as the measurement element in a precision analog control loop where the controller compares a bipolar feedback signal against a commanded value. Sixteen-bit resolution improves visibility of small errors, while the 250-kSPS SAR conversion rate supports prompt feedback for position, level, or actuator systems. Select the ±3.3 V range for tightly coupled electronics or the ±5 V or ±10 V range for wider field signals. The system should account for acquisition delay, reference accuracy, analog-filter delay, and controller timing because converter resolution alone does not determine closed-loop accuracy.

🧩

Embedded Measurement and Monitoring

The ADS8509IDW fits embedded measurement systems that need more resolution than a basic 12-bit control ADC while retaining a straightforward serial interface. At 250 kSPS, it can sample sensor values and transient analog events for diagnostics, condition monitoring, or automated test. The integrated sample-and-hold, reference, clock, and data interface reduce external component count, and the selectable bipolar ranges accommodate different sensor outputs. Designers should confirm the power-supply requirement and operating-temperature grade, then isolate sensitive reference routing from switching and serial clock signals to preserve conversion quality.

What are the key specifications of ADS8509IDW that engineers should know?
The ADS8509IDW is a 16-bit, single-channel SAR ADC that converts at 250 kSPS and supports programmable bipolar inputs of ±10 V, ±5 V, or ±3.3 V. It combines an internal sample-and-hold circuit, reference, clock, and serial interface in a 20-pin SOIC package. According to the Texas Instruments ADS8509 datasheet, data can be generated with the internal clock or synchronized to an external data clock.
What is the operating input range of the ADS8509IDW?
The ADS8509IDW supports three programmable bipolar input ranges: ±10 V, ±5 V, and ±3.3 V. Texas Instruments describes the converter as a single-channel SAR ADC designed for direct measurement of bipolar industrial signals. The selected range must be configured through the device pins and supported by an appropriate input network, reference arrangement, and front-end protection for the operating voltage.
How fast does the ADS8509IDW perform analog-to-digital conversions?
The ADS8509IDW achieves a maximum conversion rate of 250 kSPS with 16-bit resolution. According to the Texas Instruments ADS8509 datasheet, the device contains a capacitor-based SAR converter with an integrated sample-and-hold stage. A 250-kSPS rate is suitable for many industrial acquisition, process-control, and embedded measurement channels that require accurate bipolar sampling without a high-speed pipeline ADC.
What interface does the ADS8509IDW use for digital data?
The ADS8509IDW uses a serial interface compatible with SPI-style data transfer and operates from an internal conversion clock or an externally synchronized data clock. The Texas Instruments ADS8509 datasheet identifies the interface as part of the complete converter rather than an external support device. External-clock operation is useful when the host controller must determine when serial conversion results are transferred.
Where can I download the ADS8509IDW datasheet PDF?
The official ADS8509 datasheet is available from Texas Instruments through the manufacturer product page at https://www.ti.com/product/ADS8509 and the datasheet link at https://www.ti.com/lit/gpn/ADS8509. These documents provide the authoritative pin descriptions, electrical characteristics, input-range configuration, timing information, and application guidance needed before assigning PCB connections.
Where can I find the ADS8509IDW pinout and package information?
The ADS8509IDW uses a 20-pin SOIC package, and its complete pin assignments are shown in the pin-description table in the Texas Instruments ADS8509 datasheet. Use that table when routing the analog input, supply, reference, digital clock, serial data, and control signals. A third-party PDF can assist with viewing, but the Texas Instruments document should control final PCB and schematic decisions.
What is the best drop-in replacement for ADS8509IDW?
The closest verified same-footprint replacement is the ADS8509IBDW, which uses the same 20-pin SOIC format and the same 16-bit, 250-kSPS SAR converter configuration. Its distinguishing grade suffix must still be checked against the temperature and qualification requirements of the target system. The ADS8509IBDW is sourced from the same manufacturer and is listed first because it adds a distinct temperature-grade option rather than a package-only variant.
Can ADS8509IBDW replace ADS8509IDW without changing the PCB?
The ADS8509IBDW can be considered for a PCB-level replacement because it uses the same 20-pin SOIC package and retains the ADS8509 family's 16-bit, 250-kSPS SAR architecture. Before substitution, compare the complete orderable-device electrical tables for input range, reference requirements, temperature range, and digital timing. Pin compatibility does not by itself establish that every operating condition or grade requirement is unchanged.
When should I choose ADS8509IDW over a different SAR ADC?
Choose ADS8509IDW when the design requires a 16-bit SAR ADC, a 250-kSPS conversion rate, and selectable ±10 V, ±5 V, or ±3.3 V bipolar ranges in a 20-pin SOIC package. It is particularly appropriate for industrial sensors whose outputs are centered around ground. Select another converter when the application needs a different resolution, conversion speed, channel count, interface, or package.
Is ADS8509IDW suitable for industrial sensor measurement?
The ADS8509IDW is suitable for many industrial sensor-measurement applications because it combines 16-bit resolution, a 250-kSPS rate, and selectable bipolar input ranges of ±3.3 V, ±5 V, or ±10 V. Its SAR architecture is well suited to repeatable channel acquisition. A complete design must also include sensor excitation or biasing, input protection, reference conditioning, grounding, and an appropriate front-end amplifier if the sensor output does not directly match the ADC input.
How should the ADS8509IDW input and reference network be laid out?
Route the ADS8509IDW analog input and reference paths as short and quiet as possible, and place required bypass capacitors near their associated device pins according to the Texas Instruments ADS8509 datasheet. Keep digital clock and serial-data traces away from the input and reference nodes. The 20-pin SOIC package leaves little room for long analog routing, so component placement and ground-return planning should be completed before final signal-path routing.
Does ADS8509IDW support external clock synchronization?
Yes, the ADS8509IDW can output serial data using its internal conversion clock or synchronize data transfer to an external data clock. Texas Instruments identifies this dual-clock capability in the ADS8509 datasheet. External synchronization helps when multiple converters share a controlled timing architecture, although the host clock, conversion timing, serial framing, and settling requirements must be designed together.
What can replace ADS8509IDW?
The most defensible verified replacement is the ADS8509IBDW, a same-manufacturer, same-package ADS8509-family device with a different grade suffix. It preserves the 20-pin SOIC footprint and 16-bit, 250-kSPS conversion class. Because pin-to-pin packaging does not prove identical grade, reference, or timing behavior, review the manufacturer ordering table before treating it as an unconditional replacement.
Is ADS8509IDW the same as ADS8519IBDB?
No. The ADS8509IDW is a 20-pin SOIC single-channel converter, while the ADS8519IBDB belongs to a different package and device configuration. Texas Instruments engineering guidance states that the circuit connections of ADS8509 and ADS8519 are inconsistent for the cited ±10 V use case. The ADS8519IBDB is therefore not included as a drop-in alternative for ADS8509IDW.
Where to buy ADS8509IDW online and what is its lead time?
Use the Request a Quote form on this page to request current ADS8509IDW availability, unit pricing, minimum order quantity, and production lead time. Current supply and lead time can change with inventory and order volume, so request a written quotation for the exact 20-pin SOIC orderable device. The form is the appropriate channel for obtaining a current commercial commitment rather than relying on a historical listing.

נתוני עזר הנדסיים עבור ADS8509IDW — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ADS8509IDW for a compact, single-channel 16-bit measurement requiring 250-kSPS throughput, selectable ±10 V, ±5 V, or ±3.3 V bipolar inputs, and a serial interface in a 20-pin SOIC package. It is well aligned with industrial process signals, embedded sensor monitoring, PLC inputs, and data-acquisition modules where a bipolar signal is centered around ground. The ADS8509IBDW is the closest same-footprint option and should be considered when its grade suffix provides a better match to temperature or qualification requirements; review the orderable-device tables before substituting it. Other similarly resolved or similarly fast converters should not be treated as drop-in replacements unless their package, pinout, input range, reference arrangement, timing, and electrical limits are all verified. In designs where resolution beyond 16 bits is essential, evaluate the ADS1262IPW; where low power is more important than 250-kSPS throughput, evaluate the ADS1131IDR.

השוואה עם חלופות

פרמטר מוצר זה ADS8509IBDW
Brand Texas Instruments Texas Instruments
Package 20-pin SOIC 20-pin SOIC
Resolution 16 bit 16 bit
Conversion Rate 250 kSPS 250 kSPS
Channel Count 1 channel 1 channel
Architecture Successive-approximation register (SAR) Successive-approximation register (SAR)
Input Ranges ±10 V, ±5 V, and ±3.3 V ±10 V, ±5 V, and ±3.3 V
Digital Interface SPI-compatible serial interface SPI-compatible serial interface
Clocking Internal clock or external data-clock synchronization Internal clock or external data-clock synchronization
Grade Suffix IDW IBDW

מבדילים עיקריים

  • High-resolution conversion in a compact single-channel package (לעומתADS8509IBDW)
  • Three programmable bipolar measurement ranges (לעומתADS8509IBDW)
  • Flexible acquisition timing (לעומתADS8509IBDW)

הערות תכנון

Keep the analog input, reference, and analog-ground paths short and place required bypass capacitors close to their associated pins according to the Texas Instruments ADS8509 datasheet. Route SPI clock and data signals away from the input and reference nodes. Because the converter uses a 20-pin SOIC package, careful top-layer placement is important for preserving the full 16-bit conversion performance.

Do not treat the ±10 V, ±5 V, and ±3.3 V input-range selections as interchangeable without reviewing the corresponding internal configuration and external input network. Confirm the selected range, reference voltage, pin connections, and maximum input excursion in the device documentation. Incorrect range or signal conditioning can overload the input path or reduce measurement accuracy even when the ADC operates at its nominal 250-kSPS rate.

Use the internal conversion clock for a straightforward standalone acquisition path, or select external-clock synchronization when the host must control serial transfer timing. In either case, account for the complete conversion time, serial data framing, and settling interval in the acquisition timing budget. Avoid allowing clock edges and fast serial transitions to couple into the reference or analog-input traces.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer product page and distributor excerpts do not provide explicit compliance statements for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals compliance.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ADS8509IDW datasheet ADS8509IDW datasheet pdf ADS8509IDW pinout ADS8509IDW specifications ADS8509IDW input range ADS8509IDW replacement ADS8509IDW equivalent ADS8509IDW cross reference ADS8509IDW price ADS8509IDW stock Texas Instruments ADS8509IDW ADS8509IDW 20-SOIC ADS8509IDW industrial measurement ADS8509IDW vs ADS8509IBDW 16-bit 250-kSPS SAR ADC ADS8509IDW

רכיבים ומונחים קשורים

Texas Instruments ADS8509IDW ADS8509IBDW ADS8509 ADS1262IPW ADS1131IDR ADC analog-to-digital converter SAR ADC successive-approximation register data converter signal-processing IC 16-bit resolution 250-kSPS conversion rate SPI-compatible serial interface programmable bipolar input range sample-and-hold capacitor-based conversion core external data clock voltage reference 20-pin SOIC SOIC family surface-mount package industrial process measurement RoHS
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר