Analog Devices

ADV7186WBBCZ-RL 10-Bit Video Decoder | Analog Devices

MPN: ADV7186WBBCZ-RL ✗ Cuối đời
NTSC, PAL, and SECAM Rds(on) 196-CSPBGA, 12 mm × 12 mm Package
MOQ: 1 |

ADV7186WBBCZ-RL Tóm tắt

Analog Devices ADV7186WBBCZ-RL is a single-chip, multiformat video decoder and display processor with a 10-bit analog-to-digital converter, integrated LVDS transmitter, and integrated LVDS receiver in a 196-CSPBGA package measuring 12 mm by 12 mm. The decoder accepts analog NTSC, PAL, and SECAM composite video, while its analog front end supports resolutions up to 800 × 600 pixels at 60 Hz.

A video decoder is an interface IC that converts analog composite video into a digital video stream for subsequent processing, display, capture, or transmission. It belongs to the video-interface and display-processing hierarchy rather than the general-purpose signal-processing category. The ADV7186 combines analog video digitization, decoding, timing generation, and LVDS interface functions to reduce the component count required in automotive display and surveillance systems.

The principal device features include a single 10-bit ADC, support for NTSC, PAL, and SECAM formats, an integrated LVDS transmitter, and an integrated LVDS receiver. The 196-CSPBGA package provides a high pin count for parallel and serialized video interfaces, supply connections, controls, and clock signals. Analog Devices identifies the ADV7186 family as not recommended for new designs, so engineers should evaluate current device options before starting new production programs.

The ADV7186 analog front end digitizes composite video with one high-speed ADC and produces digital video data for downstream display or processing functions. Its integrated LVDS transmitter supports digital video transport over low-voltage differential signaling, while the LVDS receiver accepts a differential digital source. This combination is useful when a system must bridge legacy analog video inputs with modern digital display or processing architectures without implementing separate external interface devices.

Typical uses include automotive passenger-information displays, rear-seat entertainment systems, navigation displays, industrial video panels, security cameras, and video observation equipment. In these systems, the decoder can accept composite video from cameras or legacy sources and provide digital video to a display controller, processor, or LVDS-connected panel.

Design planning should begin with the manufacturer pin-description and reference-design material because the 196-CSPBGA layout requires careful high-speed routing, controlled impedance, solid grounding, and complete decoupling. Confirm the exact supported output format, clocking method, synchronization behavior, supply sequencing, and board-level timing budget before releasing a PCB.

This page combines the exact product identity, lifecycle notice, supported video standards, interface functions, package information, application guidance, and verified same-package family references into a focused engineering resource for legacy video-decoder designs.

Bộ thay thế dễ dàng lắp đặt cho ADV7186WBBCZ-RL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

ADV7186WBBCZ-T-RL

✅ Drop-In
Analog Devices
📦 196-CSPBGA (12 × 12 mm)
Single-chip multiformat video decoder and processor · NTSC, PAL, SECAM · 10 bits · 1 high-speed ADC · Up to SVGA · Integrated · Integrated · Composite analog video

Liên hệ để biết giá

Xem tài liệu →

ADV7186WBBCZ-TL-RL

✅ Drop-In
📦 196-CSPBGA (12 × 12 mm)
Same 196-CSPBGA footprint and stated 10-bit ADC; 0% stated ADC-resolution difference, with the TL ordering suffix requiring automotive-grade and temperature review

📋 Tham chiếu thay thế (không có trong danh mục)

ADV7186WBBCZ-RL Thông số kỹ thuật

Device Type Single-chip multiformat video decoder and display processor
ADC Resolution 10 bit
ADC Count 1 ADC
Supported Video Standards NTSC, PAL, and SECAM
Maximum Analog Input Resolution 800 × 600 pixels at 60 Hz
Input Signal Type Analog composite video
LVDS Transmitter Integrated
LVDS Receiver Integrated
Hộp 196-CSPBGA, 12 mm × 12 mm
Số chân 196 pins
Kiểu lắp đặt Surface mount
Lifecycle Recommendation Not recommended for new designs

Hướng dẫn cấu hình chân ADV7186WBBCZ-RL 196-cspbga, 12 mm × 12 mm

Cấu hình chân cho ADV7186WBBCZ-RL (196-cspbga, 12 mm × 12 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 196-cspbga, 12 mm × 12 mm cho ADV7186WBBCZ-RL

Không có dữ liệu chân cụ thể sẵn có cho ADV7186WBBCZ-RL.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADV7186WBBCZ-RL phù hợp cho 6 Áp dụngs: Automotive Navigation Displays, Rear-Seat Entertainment Systems, Security Camera Video Displays, Industrial Video Panels, Video Observation and Control Systems, Legacy Analog-to-Digital Video Conversion.

🚗

Automotive Navigation Displays

The ADV7186WBBCZ-RL fits an automotive navigation display that receives NTSC, PAL, or SECAM composite video from a legacy camera or navigation source. Its single 10-bit ADC digitizes the analog signal, while the integrated LVDS transmitter can carry the decoded video toward a digital display interface. The 196-CSPBGA package supports a high pin count for clocking, control, data, and power connections. The primary design trade-off is lifecycle risk: the family is not recommended for new designs, so this part is best reserved for continuing an established platform after confirming temperature range, AEC-Q100 status, clocking, and supply continuity.

📺

Rear-Seat Entertainment Systems

The ADV7186WBBCZ-RL can serve as the video input stage in a rear-seat or head-unit display system that accepts legacy composite video. The 10-bit ADC provides the analog front end, and the integrated LVDS transmitter provides a digital link to a display controller or panel interface. Supporting NTSC, PAL, and SECAM makes the device useful across multiple regional video systems. Because the ADV7186 family is not recommended for new designs, engineers should preserve this part for an existing platform, verify the exact output timing and synchronization requirements, and confirm that the device's operating-temperature grade covers the vehicle environment.

🎥

Security Camera Video Displays

The ADV7186WBBCZ-RL is suited to legacy surveillance installations in which a camera outputs NTSC, PAL, or SECAM composite video and the monitoring system needs digital video. The integrated 10-bit ADC performs the initial digitization, while the integrated LVDS transmitter supports point-to-point digital video transport over a controlled PCB interface. The decoder can therefore reduce the number of discrete conversion stages in a multi-camera or multi-display installation. Designers should match the camera's standard and resolution, assess cable and grounding requirements at the analog input, and validate the LVDS clocking and output timing against the downstream processor or display controller.

🏭

Industrial Video Panels

The ADV7186WBBCZ-RL can support an industrial panel that must accept a legacy composite-video source and present a digital image. Its 10-bit ADC, multiformat NTSC/PAL/SECAM decoding, and integrated LVDS transmitter form a compact analog-to-digital signal chain. The 196-CSPBGA package allows numerous dedicated digital and control connections, although it also requires careful escape routing, grounding, and thermal analysis. Since the device family is not recommended for new designs, use the ADV7186 for maintenance and established industrial systems, and confirm long-term availability and the precise power, clock, and synchronization requirements before creating a new platform.

🖥️

Video Observation and Control Systems

The ADV7186WBBCZ-RL is appropriate for observation and control equipment that must digitize an analog composite-video feed before passing it to processing electronics. Its integrated LVDS receiver permits a differential digital-video input path, while the integrated LVDS transmitter can support an additional digital link, subject to the device's exact operating configuration. The single-chip approach can simplify signal routing compared with separate ADC, decoder, and interface blocks. Engineering validation should cover supported video timing, synchronization, pixel clock distribution, input filtering, and output format. The NRND lifecycle status also makes this device best suited to established surveillance and control platforms rather than newly launched products.

🔧

Legacy Analog-to-Digital Video Conversion

The ADV7186WBBCZ-RL can be used where an established analog-video subsystem must be modernized to a digital interface without redesigning the entire source path. Its 10-bit ADC digitizes the incoming composite signal, and its multiformat decoder supports NTSC, PAL, and SECAM sources. Integrated LVDS transmit and receive functions can shorten the path between the decoder and downstream digital logic while maintaining a single-chip architecture. The principal limitation is lifecycle maturity rather than basic functionality: for a new conversion platform, select a currently recommended device. For a legacy upgrade, verify timing tolerances, pin-level connectivity, power sequencing, and the availability of the exact ordering code.

Tóm tắt các sản phẩm được đề xuất

ADV7186WBBCZ-RL Analog Devices Được sử dụng trong: Automotive Navigation Displays, Rear-Seat Entertainment Systems, Security Camera Video Displays, Industrial Video Panels, Video Observation and Control Systems, Legacy Analog-to-Digital Video Conversion ADV7186WBBCZ-T-RL Same-family ordering variant Được sử dụng trong: Automotive Navigation Displays, Security Camera Video Displays, Video Observation and Control Systems ADV7186WBBCZ-TL-RL Same-family ordering variant Được sử dụng trong: Rear-Seat Entertainment Systems, Industrial Video Panels, Legacy Analog-to-Digital Video Conversion
What is the ADV7186WBBCZ-RL?
The ADV7186WBBCZ-RL is a single-chip multiformat video decoder and display processor from Analog Devices. It combines a 10-bit ADC for analog composite video with NTSC, PAL, and SECAM decoding, plus integrated LVDS transmitter and receiver functions. According to the manufacturer product page and data sheet, the device is packaged in a 196-CSPBGA measuring 12 mm by 12 mm.
What video formats does the ADV7186WBBCZ-RL support?
The ADV7186WBBCZ-RL supports NTSC, PAL, and SECAM analog composite video. The manufacturer describes the device as a multiformat decoder with one high-speed, 10-bit ADC. Its analog front end supports input resolution up to 800 × 600 pixels at 60 Hz, making it appropriate for legacy composite-video systems requiring digital conversion and LVDS connectivity.
Where can I download the ADV7186WBBCZ-RL datasheet PDF?
The ADV7186WBBCZ-RL datasheet is available through the official Analog Devices ADV7186 product page at https://www.analog.com/en/products/adv7186.html. That page provides the device data sheet and product documentation for the ADV7186 family. It also carries the important notice that the ADV7186 is not recommended for new designs, which should be considered before committing a new product to this device.
Where can I find the ADV7186WBBCZ-RL pinout?
The ADV7186WBBCZ-RL pin assignment is published in the pin-description section of the Analog Devices ADV7186 data sheet. The component uses a 196-CSPBGA package with a 12 mm by 12 mm body, so the complete numbered ball map and connection table must be used when assigning PCB tracks. Do not infer ball locations from a generic BGA drawing.
Is the ADV7186WBBCZ-RL suitable for automotive video systems?
The ADV7186WBBCZ-RL can fit automotive display and vehicle-information systems that use NTSC, PAL, or SECAM composite video. Its 10-bit ADC and integrated LVDS transmitter and receiver support analog-to-digital conversion within one device. However, the exact automotive temperature grade and AEC-Q100 status of the RL ordering code must be confirmed in the manufacturer ordering guide before production release.
Is the ADV7186WBBCZ-RL still active?
The ADV7186WBBCZ-RL is not recommended for new designs. Analog Devices displays this lifecycle notice on the official ADV7186 product page, so it is best treated as a legacy or NRND device for maintenance, continuation, and previously approved production programs. Request the current lifecycle and supply status through the Request a Quote form on this page.
What is the difference between ADV7186WBBCZ-RL and ADV7186WBBCZ-T-RL?
ADV7186WBBCZ-RL and ADV7186WBBCZ-T-RL both use the 196-CSPBGA package and belong to the same ADV7186 decoder family, with the same stated 10-bit ADC and NTSC, PAL, and SECAM support. The suffix distinction is an ordering-code and qualification matter rather than a demonstrated change in ADC resolution. Confirm temperature range, qualification, and ordering details against the manufacturer data sheet before substitution.
What is the difference between ADV7186WBBCZ-RL and ADV7186WBBCZ-TL-RL?
ADV7186WBBCZ-RL and ADV7186WBBCZ-TL-RL are closely related 196-CSPBGA devices in the ADV7186 family. Both are identified as video decoder and display processor parts supporting 10-bit conversion and the NTSC, PAL, and SECAM standards. The ordering suffixes indicate different device variants, so verify temperature grade, qualification, and shipping configuration before treating either part as a substitute.
When should I choose the ADV7186WBBCZ-RL over another video decoder?
Choose the ADV7186WBBCZ-RL when an existing design depends on its combination of a 10-bit ADC, NTSC/PAL/SECAM decoding, integrated LVDS transmitter and receiver, and 196-CSPBGA footprint. It is most appropriate for maintaining an established automotive or industrial display design. For a new design, evaluate a device that Analog Devices recommends for new designs.
Is ADV7186WBBCZ-RL suitable for a security camera or surveillance display?
The ADV7186WBBCZ-RL is suitable for a legacy surveillance chain that uses analog NTSC, PAL, or SECAM composite video and needs digital conversion. Its 10-bit ADC and integrated LVDS interfaces can reduce the need for separate conversion and interface circuitry. The camera's output standard, resolution, synchronization requirements, and cable length must be checked before implementation.
What can replace the ADV7186WBBCZ-RL?
The closest documented family references are ADV7186WBBCZ-T-RL and ADV7186WBBCZ-TL-RL, both of which use the same 196-CSPBGA format. Their shared 10-bit conversion and NTSC/PAL/SECAM support make them the relevant starting points for a board-level replacement review. Because ordering suffixes can affect temperature grade and qualification, confirm those details in the manufacturer documentation.
Can ADV7186WBBCZ-T-RL replace ADV7186WBBCZ-RL without a PCB change?
ADV7186WBBCZ-T-RL uses the same 196-CSPBGA package as ADV7186WBBCZ-RL and supports the same stated 10-bit ADC and NTSC, PAL, and SECAM formats. It is therefore a potential pin-compatible family alternative, but a production substitution still requires confirmation of temperature grade, qualification, supply status, and all ordering-code differences. Perform a full pin and timing review before use.
Where can I buy the ADV7186WBBCZ-RL and check current lead time?
Use the Request a Quote form on this page to request the current ADV7186WBBCZ-RL quotation, stock position, minimum order quantity, and lead time. Because the device is marked not recommended for new designs, request an end-of-life or lifecycle statement as part of the quote. The form connects the request to the exact MPN and package ordering code.
What is the current price of the ADV7186WBBCZ-RL?
The current commercial price for ADV7186WBBCZ-RL should be requested through the Request a Quote form on this page. The displayed structured pricing is refreshed separately and should not be treated as a fixed historical quotation. Include the required quantity, package configuration, shipment destination, and target date when requesting the quote.
Is the ADV7186WBBCZ-RL in stock?
The current stock status for ADV7186WBBCZ-RL should be confirmed through the Request a Quote form on this page using the exact MPN ADV7186WBBCZ-RL. Analog Devices marks the ADV7186 family as not recommended for new designs, which makes lifecycle confirmation especially important for long-term maintenance builds. Ask for the available quantity, lead time, and any scheduled discontinuance information.

Dữ liệu tham khảo kỹ thuật cho ADV7186WBBCZ-RL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ADV7186WBBCZ-RL when maintaining an established analog-video design that requires a 10-bit ADC, NTSC/PAL/SECAM decoding, and integrated LVDS transmit and receive functions in a 196-CSPBGA package. ADV7186WBBCZ-T-RL is the closest documented same-package family reference when its temperature grade and qualification match the intended system. Consider ADV7186WBBCZ-TL-RL when its specific ordering-code characteristics satisfy the automotive or industrial requirements. For any new platform, favor a device that the manufacturer recommends for new designs because Analog Devices marks the ADV7186 family as not recommended for new designs. A drop-in decision must include ball-by-ball pin verification, clock and timing comparison, supply sequencing, temperature-range review, and confirmation that the replacement's qualification and lifecycle status fit the production program.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADV7186WBBCZ-T-RL ADV7186WBBCZ-TL-RL
Brand Analog Devices Analog Devices Analog Devices
Package 196-CSPBGA (12 × 12 mm) 196-CSPBGA (12 × 12 mm) 196-CSPBGA (12 × 12 mm)
Device Type Video decoder and display processor Video decoder and display processor Video decoder and display processor
ADC Resolution 10 bit 10 bit 10 bit
Supported Video Standards NTSC, PAL, SECAM NTSC, PAL, SECAM NTSC, PAL, SECAM
Maximum Analog Input Resolution 800 × 600 pixels at 60 Hz 800 × 600 pixels at 60 Hz 800 × 600 pixels at 60 Hz
LVDS Transmitter Integrated Integrated Integrated
LVDS Receiver Integrated Integrated Integrated
Lifecycle Recommendation Not recommended for new designs Not recommended for new designs Not recommended for new designs

Bảo phân biệt quan trọng

  • Combines analog decoding and LVDS interfaces in one decoder (vsADV7186WBBCZ-T-RL)
  • Supports three principal legacy composite-video standards (vsADV7186WBBCZ-TL-RL)
  • Maintains the same 196-CSPBGA land pattern (vsADV7186WBBCZ-T-RL)

Ghi chú thiết kế

Treat the 196-CSPBGA layout as a high-speed mixed-signal design. Place input, output, and decoupling connections directly beneath or as close as practical to their associated balls; route the analog video input away from high-speed digital and LVDS traces; and provide a continuous ground reference beneath the device. Use the manufacturer pin-description table and recommended reference layout when assigning every ball and escape route.

Preserve the analog input path as a short, controlled-impedance connection because the 10-bit ADC is sensitive to noise and timing disturbance. Keep video traces away from switching nodes, maintain consistent return paths, and avoid adding long stubs or unnecessary vias. Validate the composite-video amplitude, bandwidth, clocking, and synchronization at the pins with the manufacturer's recommended test setup.

Route differential LVDS pairs as tightly coupled pairs with matched geometry and a continuous reference plane. Keep the analog and digital sections physically separated where practical, and connect the power architecture according to the manufacturer decoupling and exposed-pad guidance. Review the final stack-up with the PCB fabricator and confirm differential impedance, return-path continuity, and BGA assembly constraints.

Do not assume that an ADV7186 family ordering code is interchangeable solely because the package name matches. Confirm the exact temperature grade, qualification, lifecycle state, pin functions, clock requirements, and supply configuration for each suffix. For new products, select a device that the manufacturer recommends for new designs rather than starting with an NRND decoder.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The exact ordering-code qualification and environmental declarations must be confirmed in the manufacturer product documentation before production release.

Tìm kiếm liên quan

ADV7186WBBCZ-RL datasheet ADV7186WBBCZ-RL pinout ADV7186WBBCZ-RL datasheet pdf ADV7186WBBCZ-RL equivalent ADV7186WBBCZ-RL replacement ADV7186WBBCZ-RL price ADV7186WBBCZ-RL stock Analog Devices ADV7186WBBCZ-RL ADV7186WBBCZ-RL vs ADV7186WBBCZ-T-RL ADV7186WBBCZ-RL 196 CSPBGA ADV7186WBBCZ-RL NTSC PAL SECAM ADV7186WBBCZ-RL automotive video decoder ADV7186WBBCZ-RL LVDS interface ADV7186WBBCZ-RL footprint ADV7186WBBCZ-RL lead time

Các bộ phận và thuật ngữ liên quan

Analog Devices ADV7186WBBCZ-RL ADV7186WBBCZ-T-RL ADV7186WBBCZ-TL-RL ADV7186 Video decoder Display processor Video interface IC Video processing IC Semiconductor Analog composite video 10-bit ADC NTSC PAL SECAM LVDS transmitter LVDS receiver LVDS 196-CSPBGA CSPBGA package family BGA package family Surface-mount technology Automotive video display Industrial video panel Security camera video
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ