APA075-FG144A - 75K Gate Flash FPGA, 180MHz, 144-LBGA | Microchip Technology
MPN: APA075-FG144A ✓ Hoạt độngAPA075-FG144A Tóm tắt
An FPGA is a semiconductor whose digital function is defined by a configuration file rather than fixed interconnects. ProASICPLUS devices combine this reprogrammability with nonvolatile flash memory, so the configuration remains stored without continuous SRAM refresh. This makes the APA075-FG144A suitable for designs requiring field updates, deterministic startup behavior, or a migration path from an ASIC-like development process to a programmable implementation.
Key electrical characteristics include a 0.22 um CMOS process, 2.5 V supply operation, and a 180 MHz maximum operating frequency. The 75,000 equivalent system gates provide a moderate logic capacity for control logic, interface bridging, industrial automation, telecommunications, and embedded system support functions. The 144-LBGA package also supports a compact surface-mount implementation while exposing a larger I/O complement than smaller FPGA packages.
The ProASICPLUS architecture is supported by an ASIC-style design flow that allows logic to be developed and verified using conventional HDL design methods before programming the flash configuration. This is particularly useful where a project needs frequent post-build modifications without replacing the device or adding a separate configuration PROM.
Designers should treat the APA075-FG144A as a legacy FPGA platform and confirm the exact package, speed grade, temperature grade, and available configuration tools before starting a new design. Verify the pinout and I/O standard requirements against the manufacturer datasheet, and confirm that the development software supports the specific ProASICPLUS family and device revision.
This page consolidates the device family specifications, verified distributor identification, same-footprint alternatives, and practical design considerations for engineers evaluating the APA075-FG144A in legacy or migration projects.
Bộ thay thế dễ dàng lắp đặt cho APA075-FG144A — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với APA075-FG144A (cùng hình factor và footprint) — khác nhau ở Configuration Memory, Logic Cells, System Gates.
APA075-FG144I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
APA075-FGG144
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
APA075-FG144
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →APA075-FG144A Tỷ lệ tối đa & tính chất điện
| Product Type | ProASICPLUS field-programmable gate array (FPGA) |
| System Gates | 75,000 gates |
| Logic Cells | 3,072 logic cells |
| Tần số xung maksimum | 180 MHz |
| Technology | 0.22 um CMOS |
| Điện áp cung cấp | 2.5 V |
| Configuration Memory | Nonvolatile flash |
| Hộp | 144-LBGA |
| Kiểu lắp đặt | Surface mount |
| Automotive Grade | 2.5 V automotive |
| Live at Power-Up | Yes |
| Reprogrammable | Yes |
| ASIC Design Flow | Supported |
| Operating Frequency | Up to 180 MHz |
| Manufacturer | Microchip Technology |
| Trạng thái vòng đời | Active |
| Lead Time | 16 weeks |
| Minimum Order Quantity | 10,080 units |
| Packaging | Tray |
Hướng dẫn cấu hình chân APA075-FG144A 144-lbga
Cấu hình chân cho APA075-FG144A (144-lbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho APA075-FG144A.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
APA075-FG144A phù hợp cho 7 Áp dụngs: Industrial Automation Control, Telecommunications Interface Bridging, Data Acquisition and Measurement, Automotive Electronic Control Module, Motor Drive and Resolver Interface, Security and Authentication Control, Server and Network Control Plane.
Industrial Automation Control
APA075-FG144A fits industrial controllers that combine sequencing, machine-state logic, and communication-interface support in one programmable device. Its 75,000 system gates and 3,072 logic cells provide moderate capacity for control blocks, while 180 MHz maximum clock frequency supports faster datapath or bus-handling sections. Nonvolatile flash configuration and live-at-power-up behavior help establish deterministic startup after power restoration. Confirm the machine's I/O voltage, operating temperature, and safety requirements before releasing the design.
Được đề xuất
Telecommunications Interface Bridging
APA075-FG144A can serve as a programmable interface and protocol bridge between legacy parallel logic and newer serial links. Its 3,072 logic cells allow parallel-to-serial conversion, framing logic, and buffering to be consolidated into one device, while the 180 MHz maximum clock rating supports moderately demanding transfers. Flash-based configuration permits field updates without external configuration memory. Validate lane timing, I/O standards, and signal-integrity requirements against the target backplane.
Được đề xuất
Data Acquisition and Measurement
APA075-FG144A is suitable for digital control around a measurement front end, including trigger logic, channel sequencing, digital correction, and interface control. The 75,000 system gates allow ancillary control logic to be integrated beside a converter interface, and 180 MHz maximum frequency supports high-rate digital processing stages. Nonvolatile configuration also simplifies field maintenance because the measurement configuration is retained in flash. Use the pin-description table to confirm differential or analog-adjacent I/O requirements.
Được đề xuất
Automotive Electronic Control Module
APA075-FG144A's automotive-marked designation makes it relevant to legacy automotive electronics modules requiring flash-reprogrammable logic. Typical uses include body-control sequencing, sensor aggregation, actuator command logic, and communication gateway functions. Its 75,000 system gates and 180 MHz maximum frequency suit moderate control architectures, while live-at-power-up behavior supports deterministic initialization. Confirm AEC-Q100 qualification details, temperature range, and supply-chain documentation for the specific production program.
Được đề xuất
Motor Drive and Resolver Interface
APA075-FG144A can implement motor-control support logic such as encoder or resolver decoding, direction sequencing, fault capture, and gate-command coordination. Its programmable flash logic allows timing constants and control sequences to be revised after production, and the 180 MHz maximum clock is suitable for capturing and conditioning high-speed switching signals. The 144-LBGA package provides a larger I/O pool than small FPGAs. Validate isolation, ground, and high-current layout separation in the complete power electronics design.
Được đề xuất
Security and Authentication Control
APA075-FG144A can serve as a dedicated protocol, challenge-response, and authentication-control engine within a larger embedded system. Its nonvolatile flash configuration retains firmware logic across power cycles, while 3,072 logic cells are suitable for finite-state machines, checksum logic, and serial authentication sequences. The 180 MHz maximum clock allows the logic to run alongside moderate data-processing tasks. Keep secret material and cryptographic implementations under formal review rather than relying on device identity alone.
Được đề xuất
Server and Network Control Plane
APA075-FG144A is applicable to legacy control-plane, front-panel, and I/O expansion designs where reprogrammable nonvolatile logic is useful. The 75,000 system gates can consolidate protocol termination, status aggregation, and management logic, while 180 MHz maximum frequency supports typical control paths. Flash configuration simplifies field maintenance and reduces the need for a separate boot PROM. For new server platforms, verify long-term roadmap availability and toolchain support as part of the sourcing decision.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho APA075-FG144A — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | APA075-FG144I | APA075-FGG144 | APA075-FG144 |
|---|---|---|---|---|
| Package | 144-LBGA | 144-LBGA | 144-LBGA family package | 144-LBGA family package |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 75,000 gates | 75,000 gates | 75,000 gates | 75,000 gates |
| Logic Cells | 3,072 logic cells | 3,072 logic cells | 3,072 logic cells | 3,072 logic cells |
| Maximum Clock Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Technology | 0.22 um CMOS | 0.22 um CMOS | 0.22 um CMOS | 0.22 um CMOS |
| Supply Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Configuration Memory | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash |
| Live at Power-Up | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Automotive-marked APA075 ordering option within the same 144-LBGA family (vsAPA075-FG144I)
- Lead-free ordering variant with the same ProASICPLUS device identity (vsAPA075-FGG144)
- Flash-based configuration with live-at-power-up operation (vsAPA075-FG144)
Ghi chú thiết kế
APA075-FG144A operates from a 2.5 V supply according to the device family identification. Place the core and I/O supply decoupling network close to the corresponding package power terminals, and follow the manufacturer recommended capacitor values and placement. Because this is a 144-ball legacy package, verify the exact power-ball map against the datasheet before routing; a guessed power-plane connection can prevent programming or cause intermittent operation.
The 144-LBGA land pattern requires careful escape-routing between the 1 mm-class ball array and the surrounding PCB layers. Use the manufacturer package drawing and recommended via-in-pad or via-adjacent escape strategy, keep high-speed clock and data nets short, and provide a continuous ground reference beneath the device. Validate the board stack-up and assembly process with the package drawing rather than relying on a generic BGA layout.
Do not assume that every APA075 ordering suffix is interchangeable. APA075-FG144A, APA075-FG144I, APA075-FGG144, and APA075-FG144 differ in ordering and qualification meaning even though they share the same family and package naming. Check the manufacturer ordering table, temperature grade, speed grade, automotive designation, and supported programming tools before releasing a substitute to production.
The ProASICPLUS family uses a 0.22 um CMOS process and the package has a large number of ball terminals for power, ground, and I/O. Thermal performance therefore depends heavily on the PCB copper available beneath and around the device. Use the datasheet thermal model with the actual board copper and enclosure temperature, and provide adequate ground-plane area for both electrical return paths and heat spreading.
Although the maximum clock rating is 180 MHz, board-level signal integrity depends on the selected I/O standard, load, and routing topology. Apply the manufacturer's I/O guidance for clock distribution, avoid stubs, and keep sensitive configuration or serial interfaces away from high-slew-rate outputs. Validate timing with realistic board constraints instead of relying only on the device's maximum frequency figure.
Thông tin tuân thủ
The verified distributor product record lists APA075-FG144A as RoHS non-compliant. The A automotive designation is shown in the device description, but an AEC-Q100 qualification claim is not stated, so AEC-Q100 status remains unknown. RoHS, REACH, halogen-free, and conflict-minerals documents should be requested for the specific ordering code.