SI3050-E-FT - 3.3V Voice DAA | Skyworks Solutions Inc.
MPN: SI3050-E-FT ✓ Hoạt độngSI3050-E-FT Tóm tắt
A Direct Access Arrangement, or DAA, is the integrated analog interface used at the system side of a voice connection. Within the broader hierarchy, a DAA is a telecom interface IC, a line-interface circuit, and a semiconductor. A system-side DAA converts the line-side voice signal into a digital representation for the voice-processing system while also supporting hook-state, ring, and line-control functions required by globally deployed analog telephone equipment.
The Si3050 family emphasizes programmable operation and global compliance. According to the manufacturer data sheet for Si3050 and Si3011/18/19, the chipset is designed to provide a programmable, globally compliant foreign exchange office interface. Silicon Laboratories' isolation-capacitor technology integrates the isolation function into the interface solution, reducing the number of discrete telephone-network protection components required around the voice line.
The SI3050-E-FT identifies revision E of the Si3050 in a 20-pin TSSOP tape-and-reel package. The related Si3011, Si3018, and Si3019 devices provide line-side interface functions for different international line arrangements. The Si3050 is programmed through a serial control interface, allowing the host controller to configure operating parameters and monitor line events. Firmware and register configuration should therefore be treated as part of the complete voice-system design rather than as a hardware-only implementation.
Typical applications include analog foreign exchange office platforms, Voice over Packet gateways, digital subscriber line equipment, PBX interfaces, voice adapters, and embedded telephony controllers. In these systems, the Si3050 handles the system-side analog interface while a companion Si3011, Si3018, or Si3019 supports the corresponding line-side interface. This division of responsibility enables one host processor to manage ringing, hook state, line feeding, and voice data transfer across multiple international markets.
Circuit design must preserve the Si3050 and companion line-side device as a validated chipset. Use the manufacturer's recommended external components, isolation network, clock configuration, and PCB layout because line-interface performance depends on the complete analog path rather than the IC alone. The TSSOP footprint also requires adequate copper and solder-joint inspection to avoid opens in fine-pitch leads during assembly or rework.
This page combines the verified 3.3 V, 20-pin TSSOP identity with engineering guidance covering companion-device selection, isolation-capacitor implementation, line-interface layout, and revision-aware sourcing. It also organizes drop-in family candidates and verified document locations so engineers can assess compatibility before committing a new voice-interface PCB design.
Bộ thay thế dễ dàng lắp đặt cho SI3050-E-FT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
SI3050-E1-FT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SI3050-E1-GT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SI3050-E1-FTR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SI3050-E1-GTR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SI3050-E1-FMR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SI3050-E-FT Thông số kỹ thuật
| Product Type | System-side Direct Access Arrangement (DAA) voice interface IC |
| Điện áp cung cấp | 3.3 V |
| Hộp | 20-pin TSSOP, 4.40 mm width |
| Device Revision | Revision E |
| Interface Class | Foreign exchange office (FXO) analog interface |
| Isolation Technology | Integrated isolation-capacitor technology |
| External Isolation Transformer | Not required by the chipset architecture |
| External Isolation Relay | Not required by the chipset architecture |
| External Optoisolator | Not required by the chipset architecture |
| Compatible Companion Family | Si3011, Si3018, and Si3019 line-side devices |
| Lead-Free Status | Lead-free |
| Kiểu lắp đặt | Surface mount |
| Shipping Format | Tape and reel |
Hướng dẫn cấu hình chân SI3050-E-FT 20-pin tssop, 4.40 mm width
Cấu hình chân cho SI3050-E-FT (20-pin tssop, 4.40 mm width gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SI3050-E-FT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SI3050-E-FT phù hợp cho 6 Áp dụngs: Voice over Packet Gateway, Foreign Exchange Office Platform, PBX Line Interface Card, Digital Subscriber Line Equipment, Embedded Telephony Adapter, Industrial Voice Communication Terminal.
Voice over Packet Gateway
The SI3050-E-FT fits the system-side foreign exchange office interface of a Voice over Packet gateway because the Si3050 chipset provides a programmable 3.3 V DAA function in a 20-pin TSSOP. It works with an Si3011, Si3018, or Si3019 line-side device, allowing the gateway to support different international line arrangements. According to the manufacturer chipset description, integrated isolation-capacitor technology removes external isolation transformers, relays, and optoisolators. Designers should still implement the prescribed external line network and validate regional line parameters before deployment.
Được đề xuất
Foreign Exchange Office Platform
The SI3050-E-FT is designed for system-side analog line termination in a foreign exchange office platform where multiple international voice interfaces may be required. Its programmable Si3050 architecture allows a host controller to manage line behavior through registers, while the appropriate Si3011, Si3018, or Si3019 device handles the corresponding line side. The 3.3 V TSSOP implementation supports compact multi-channel designs while avoiding discrete isolation-transformer hardware. Firmware, calibration, and country-specific line settings should be validated together rather than treated as interchangeable across markets.
Được đề xuất
PBX Line Interface Card
A private branch exchange line card can use the SI3050-E-FT to implement the 3.3 V system-side voice DAA in a compact 20-pin TSSOP footprint. The device works with the Si3011, Si3018, or Si3019 family to provide the system-side and line-side portions of an analog FXO interface. Its isolation-capacitor architecture reduces the mechanical and board area normally occupied by an isolation transformer, relay, or optoisolator. Dense PBX cards still require careful grounding, isolation-network layout, thermal review, and production testing of every supported line configuration.
Được đề xuất
Digital Subscriber Line Equipment
The SI3050-E-FT can support analog voice termination in DSL equipment that requires a foreign exchange office interface alongside broadband data circuitry. Its system-side DAA role and 3.3 V operation align with the Si3050 chipset architecture, while Si3011, Si3018, or Si3019 supplies the required line-side counterpart. Integrated isolation-capacitor technology simplifies the voice path by eliminating external isolation transformers, relays, and optoisolators. The line network must still follow the manufacturer reference design to preserve isolation, impedance, and regional regulatory performance.
Được đề xuất
Embedded Telephony Adapter
The SI3050-E-FT is appropriate for an embedded telephony adapter that connects a digital host processor to an analog telephone line. The 20-pin TSSOP package limits board area, and the Si3050 chipset provides programmable system-side DAA behavior without the space and component count of a discrete isolation-transformer implementation. A matching Si3011, Si3018, or Si3019 defines the line-side characteristics for the target country. The host firmware must configure the device correctly and account for line states, ring detection, and revision-specific register behavior.
Được đề xuất
Industrial Voice Communication Terminal
The SI3050-E-FT can be used in industrial voice terminals that require an analog FXO connection to legacy telephone infrastructure. The system-side DAA operates at 3.3 V and shares the same 20-pin TSSOP package family as the identified revision alternatives, facilitating controlled redesigns. The integrated isolation-capacitor architecture eliminates external isolation transformers, relays, and optoisolators, which can improve board-space efficiency. Because an industrial terminal may face varied line conditions andEMC environments, use the prescribed protection network and verify line-interface performance during production qualification.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SI3050-E-FT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SI3050-E1-FT | SI3050-E1-GT | SI3050-E1-FTR | SI3050-E1-GTR | SI3050-E1-FMR |
|---|---|---|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Device Revision | Revision E | E1 revision | E1 revision with G status code | E1 revision | E1 revision with G status code | E1 revision |
Bảo phân biệt quan trọng
- Direct revision match with the documented E-series ordering identity (vsSI3050-E1-FT)
- Compact 20-pin TSSOP implementation (vsSI3050-E1-GT)
- System-side role with an established Si3011/18/19 companion ecosystem (vsSI3050-E1-FTR)
Ghi chú thiết kế
Implement the PCB with the manufacturer's recommended Si3050 and companion Si3011/18/19 reference layout. Preserve the relative placement of the isolation-capacitor network, line components, bypass capacitors, clock components, and ground returns. Keep the analog telephone-line region separated from switching converters and high-speed digital signals, and route the complete approved network rather than substituting individual components without revalidation.
Treat the 20-pin TSSOP footprint as a fine-pitch assembly constraint. Apply manufacturer land-pattern guidance, maintain solder-mask and paste consistency, and plan inspection points for each lead. Rework should use controlled temperature profiles because bridged or lifted TSSOP leads can create intermittent line faults that are difficult to diagnose in production voice equipment.
Do not select a Si3050 variant from the package suffix alone. Compare the exact revision identifier, companion Si3011, Si3018, or Si3019 device, register map, electrical limits, temperature grade, and intended shipping format. The E, E1, and related G-status variants share the 20-pin TSSOP family, but revision-specific firmware and register behavior must be checked before substitution.
Follow the manufacturer clock and grounding requirements for the digital control path between the Si3050-E-FT and host controller. Keep clock traces short, provide the prescribed bypass capacitance, and return high-current digital and line-network currents without sharing narrow paths with sensitive analog nodes. Validate timing and line-signal integrity on the final multilayer PCB because enclosure, cables, and external network impedance affect system performance.
Thông tin tuân thủ
The verified Mouser record identifies the SI3050-E-FT as lead-free. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified in the available product information. AEC-Q100 is not applicable to this telecom interface IC based on its stated product category.