Microchip Technology

AT91SAM9261-CJ - 190MHz ARM9 Microprocessor | Microchip

MPN: AT91SAM9261-CJ ✓ Hoạt động
217-LFBGA (15 x 15 mm) Package 190 MHz Speed
MOQ: 1 |

AT91SAM9261-CJ Tóm tắt

The Microchip Technology AT91SAM9261-CJ is a 32-bit, single-core ARM926EJ-S system-on-chip microprocessor operating at up to 190 MHz in a 217-LFBGA (15 x 15 mm) package. It reaches 210 MIPS at 190 MHz, includes 160 KB of configurable SRAM, and integrates extensive system peripherals for embedded control applications.

An ARM-based microcontroller is a programmable semiconductor that combines a processor core, memory interfaces, communication controllers, timers, and other peripherals on one device. The AT91SAM9261 belongs to the ARM9 family of embedded processors, connecting the ARM926EJ-S compute core with external memory, graphics, industrial, and communications interfaces. Its 16 KB data cache, 16 KB instruction cache, and write buffer improve instruction and data throughput.

The processor provides DSP instruction extensions and ARM Jazelle technology for Java acceleration. These features extend the ARM926EJ-S beyond conventional general-purpose control, enabling efficient handling of signal-processing and Java-oriented workloads. The 160 KB internal SRAM can be configured as tightly coupled memory, providing deterministic access for performance-sensitive code or data.

A complete system-on-chip architecture places the ARM926EJ-S core, bus matrix, internal memories, boot logic, and a broad peripheral set in one package. The bus matrix manages access to internal and external memory and determines the boot-memory mapping according to the state of the BMS pin at reset. This integration reduces external component count and supports compact embedded platforms.

Typical uses include industrial human-machine interfaces, networked embedded controllers, graphics-based terminals, data acquisition equipment, and connected control systems. The LCD controller and extensive peripheral set suit display-oriented designs, while external communications controllers can connect the processor to industrial networks or removable storage.

Designers should account for the large 217-ball BGA footprint, high-speed memory routing, multilayer PCB requirements, and careful power, ground, and decoupling distribution. The processor's 190 MHz operating rate also requires signal-integrity checks on memory and external interface nets, particularly where board dimensions or edge rates limit routing flexibility.

This page combines the manufacturer's core device characteristics with practical design guidance, pin-compatible-device information, application context, and a parameter comparison for engineers evaluating an AT91SAM9261-based design or considering a compatible SAM9-family migration path.

Bộ thay thế dễ dàng lắp đặt cho AT91SAM9261-CJ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

SAM9G10

✅ Drop-In
📦 217-LFBGA (15 x 15 mm)
Pin-compatible eMPU; target clock is 190 MHz, while the candidate clock and detailed electrical differences are .

📋 Tham chiếu thay thế (không có trong danh mục)

SAM9261S

✅ Drop-In
📦 217-LFBGA (15 x 15 mm)
Pin-compatible SAM9261-family eMPU; target clock is 190 MHz, while candidate-specific differences are .

📋 Tham chiếu thay thế (không có trong danh mục)

AT91SAM9261-CJ Tỷ lệ tối đa & tính chất điện

Processor Core ARM926EJ-S
Architecture ARMv5TE-compatible
Tần số xung maksimum 190 MHz
Performance 210 MIPS at 190 MHz
Core Count 1 core
Data Width 32 bit
Instruction Set ARM Thumb with DSP instruction extensions
Java Acceleration ARM Jazelle technology
Internal SRAM 160 KB, configurable as TCM
Data Cache 16 KB
Instruction Cache 16 KB
Write Buffer Present
Hộp 217-LFBGA (15 x 15 mm)
Terminal Count 217 terminals
Kiểu lắp đặt Surface mount
Temperature Grade Industrial
Peripheral Integration Graphics LCD controller and extensive peripheral set
Boot Control BMS pin determines boot-memory mapping

Hướng dẫn cấu hình chân AT91SAM9261-CJ 217-lfbga (15 x 15 mm)

Cấu hình chân cho AT91SAM9261-CJ (217-lfbga (15 x 15 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 217-lfbga (15 x 15 mm) cho AT91SAM9261-CJ

Không có dữ liệu chân cụ thể sẵn có cho AT91SAM9261-CJ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AT91SAM9261-CJ phù hợp cho 6 Áp dụngs: Industrial Human-Machine Interfaces, Data Acquisition and Control Systems, Networked Embedded Gateways, LCD-Based Operator Consoles, Signal-Processing Embedded Products, Java-Enabled Embedded Control.

🏭

Industrial Human-Machine Interfaces

The AT91SAM9261-CJ fits an industrial HMI that requires responsive graphical interaction and broad peripheral integration. Its ARM926EJ-S core runs at up to 190 MHz and delivers 210 MIPS, while the integrated graphics LCD controller reduces the need for a separate display controller. The 160 KB of SRAM can be configured as tightly coupled memory for code or data requiring deterministic access. A practical design would still require external nonvolatile storage and, depending on display resolution, external memory. The 217-LFBGA package also demands multilayer PCB construction, controlled impedance, and careful power distribution.

📈

Data Acquisition and Control Systems

The AT91SAM9261-CJ is suitable for data-acquisition equipment where deterministic control must coexist with network connectivity and graphical diagnostics. Its 190 MHz ARM926EJ-S core provides 210 MIPS of processing capability, while the 16 KB data cache, 16 KB instruction cache, and write buffer support mixed control and data workloads. The 160 KB internal SRAM can help isolate time-critical routines through tightly coupled memory configuration. Designers should allocate external memory for large sample buffers and use the integrated peripheral set to minimize unnecessary glue logic. High-speed external interfaces require controlled-impedance routing and robust decoupling.

🌐

Networked Embedded Gateways

The AT91SAM9261-CJ can serve as the central processor in a compact networked embedded gateway because it combines a 190 MHz ARM9 core, 160 KB of internal SRAM, and an extensive peripheral set in one 217-LFBGA device. The internal architecture is appropriate for protocol processing, local control, and status aggregation when external communication controllers are attached through the processor's memory-mapped buses. Boot behavior is selected through the BMS pin and must be considered when designing the boot-memory interface. For production equipment, use controlled external storage, isolate high-speed memory from sensitive analog sections, and validate the complete power sequence under worst-case bus activity.

📺

LCD-Based Operator Consoles

The AT91SAM9261-CJ is appropriate for an LCD operator console that combines touch or keypad input, real-time process display, and communications. The integrated graphics LCD controller directly supports display-oriented designs, and the 190 MHz ARM926EJ-S core provides enough performance for responsive screen updates alongside background protocol handling. Its DSP instruction extensions can assist selected signal-processing tasks, while Jazelle technology provides hardware acceleration for compatible Java operations. The design should match the LCD interface timing and electrical requirements to the manufacturer datasheet, provide clean supply rails, and reserve routing space for the large BGA footprint and external memory.

🔧

Signal-Processing Embedded Products

The AT91SAM9261-CJ is useful in embedded signal-processing products because its ARM926EJ-S core includes DSP instruction extensions and operates at 190 MHz with 210 MIPS of performance. The 160 KB of internal SRAM can be configured as tightly coupled memory, allowing selected algorithms or working data to receive low-latency access. The 16 KB data cache and instruction cache also support repeated computational operations, although a real-time design must account for external-memory latency during data transfers. Applications should benchmark the actual compiler output and verify interrupt latency. Firmware and boot code belong in external memory when the application exceeds the internal SRAM capacity.

🖥️

Java-Enabled Embedded Control

The AT91SAM9261-CJ supports Java-oriented embedded control because its ARM926EJ-S architecture includes Jazelle Java acceleration. At 190 MHz and 210 MIPS, the processor can execute control software alongside Java-enabled middleware or graphical functions while using 16 KB caches to improve execution efficiency. The 160 KB internal SRAM is limited for full Java runtimes, so external memory and nonvolatile boot storage remain important system-design decisions. Developers should confirm the relevant runtime, compiler, memory map, and peripheral drivers against the selected ordering code. Power sequencing and deterministic interrupt behavior should be validated before deployment in a control product.

Tóm tắt các sản phẩm được đề xuất

SAM9G10 Pin-compatible eMPU evaluation candidate Được sử dụng trong: Industrial Human-Machine Interfaces, Data Acquisition and Control Systems, Networked Embedded Gateways, LCD-Based Operator Consoles, Signal-Processing Embedded Products, Java-Enabled Embedded Control SAM9261S Pin-compatible SAM9261-family evaluation candidate Được sử dụng trong: Industrial Human-Machine Interfaces, Data Acquisition and Control Systems, Networked Embedded Gateways, LCD-Based Operator Consoles, Signal-Processing Embedded Products, Java-Enabled Embedded Control
What is the AT91SAM9261-CJ?
The AT91SAM9261-CJ is a 32-bit ARM926EJ-S system-on-chip microprocessor operating at up to 190 MHz and delivering 210 MIPS. According to the manufacturer datasheet, it combines DSP instruction extensions, ARM Jazelle Java acceleration, 16 KB data and instruction caches, and a write buffer. The device is packaged as a 217-LFBGA measuring 15 x 15 mm.
What are the key specifications of AT91SAM9261-CJ that engineers should know?
The AT91SAM9261-CJ combines a 190 MHz ARM926EJ-S core with 160 KB of SRAM, 16 KB of data cache, 16 KB of instruction cache, DSP instructions, and Jazelle Java acceleration. It operates as one 32-bit core and reaches 210 MIPS at 190 MHz. Its 217-LFBGA package measures 15 x 15 mm and integrates an LCD controller with a broad peripheral set.
Where can I download the AT91SAM9261-CJ datasheet PDF?
The AT91SAM9261 datasheet PDF is available through the Atmel documentation copy hosted by Keil and through the Microchip product page. The document covers the ARM926EJ-S core, memory architecture, bus matrix, caches, SRAM, peripherals, electrical characteristics, and package information. Use the document revision associated with the 217-LFBGA variant for production design work.
Where can I find the AT91SAM9261-CJ pinout?
The AT91SAM9261-CJ pin assignment is documented in the manufacturer's datasheet and must be checked against the 217-ball LFBGA land pattern before PCB routing. Because the complete numbered ball list is not reproduced on this page, use the package pin-description table and ball-out diagram in the datasheet as the authoritative assignment for power, grounds, clocks, memory, and peripheral signals.
What is the difference between AT91SAM9261-CJ and AT91SAM9261?
AT91SAM9261 identifies the ARM926EJ-S device family, while AT91SAM9261-CJ identifies the 217-LFBGA, 15 x 15 mm ordering variant. According to the manufacturer product page, the underlying SAM9261 runs at up to 190 MHz and contains 160 KB of configurable SRAM. Package, temperature, and ordering suffixes must always be checked before treating a related listing as interchangeable.
Can SAM9G10 replace AT91SAM9261-CJ?
SAM9G10 is identified as a pin-compatible eMPU option for the SAM9261 by Microchip support. A PCB-level replacement still requires verification of package ball assignment, power sequencing, memory compatibility, peripheral differences, and software device configuration. The target AT91SAM9261-CJ is a 217-LFBGA running at 190 MHz, so those checks are essential before approving a SAM9G10 variant.
Can SAM9261S replace AT91SAM9261-CJ?
SAM9261S is identified as a pin-compatible eMPU option for the SAM9261. It is therefore a relevant starting point for a replacement review, but the exact package suffix, clock limit, electrical limits, memory interface, and firmware support must match the installed design. Confirm every selected ordering code against the manufacturer documentation before committing to the substitution.
What is the best drop-in replacement for AT91SAM9261-CJ?
SAM9G10 and SAM9261S are the two pin-compatible eMPU options specifically identified for the AT91SAM9261. No complete five-part drop-in list is established by the available manufacturer and distributor documentation. Treat the two named devices as qualified replacement candidates, then verify their exact package suffixes, electrical characteristics, boot behavior, and software support against the original design.
When should I choose AT91SAM9261-CJ over SAM9G10?
Choose the AT91SAM9261-CJ when an existing design is built around the original SAM9261 190 MHz ARM926EJ-S platform and its verified software, memory, and peripheral configuration. Consider SAM9G10 when its device-specific resources and software support provide a useful migration path. The decision should be based on complete electrical, pinout, memory, and firmware verification rather than processor category alone.
Is the AT91SAM9261-CJ suitable for industrial human-machine interfaces?
The AT91SAM9261-CJ is suitable for industrial HMI designs that benefit from a 190 MHz ARM processor, 160 KB of internal SRAM, an integrated graphics LCD controller, and extensive peripherals. The industrial temperature grade and surface-mount package support embedded control products. Final suitability depends on display interface timing, memory design, operating-temperature requirements, and the complete peripheral set needed by the product.
How much power does the AT91SAM9261-CJ dissipate?
Power dissipation for the AT91SAM9261-CJ depends on the selected I/O voltage, core voltage, clock activity, enabled peripherals, external memory, and ambient temperature. The available device summary does not state a complete operating-current table. Use the manufacturer electrical-characteristics section for maximum and typical current figures and calculate board-level dissipation from the actual voltage and current operating modes.
What is the lead time for AT91SAM9261-CJ?
The current lead time and minimum order quantity should be requested through the Request a Quote form on this page. Lead time can vary with the exact ordering suffix, package availability, production schedule, and required quantity. Providing the complete MPN and target quantity allows the request to be associated with the correct 217-LFBGA device configuration.
Where can I buy AT91SAM9261-CJ online?
Use the Request a Quote form on this page to request AT91SAM9261-CJ availability, current lead time, and a formal quotation. The request should identify the complete MPN, required quantity, and whether reel, tray, or another approved delivery format is needed. This avoids confusion with related SAM9261 devices that use different ordering codes or packages.
Is AT91SAM9261-CJ in stock?
Current AT91SAM9261-CJ inventory should be confirmed through the Request a Quote form on this page. Stock status can change and may differ by manufacturer lot, packaging method, and exact ordering suffix. Submit the complete MPN and required quantity for an availability check rather than treating a related family listing as confirmation of the 217-LFBGA part.
What can replace the AT91SAM9261-CJ in a pin-compatible design?
SAM9G10 and SAM9261S are the pin-compatible eMPUs named for the AT91SAM9261. The target operates at up to 190 MHz in a 217-LFBGA package and includes 160 KB of internal SRAM, so each candidate must be checked for exact ball compatibility, voltage limits, memory behavior, peripheral differences, and software support. A pin-compatible designation alone does not prove that every electrical and software requirement is identical.
Does the AT91SAM9261-CJ support DSP and Java acceleration?
Yes. According to the manufacturer datasheet, the AT91SAM9261 includes DSP instruction extensions and ARM Jazelle technology for Java acceleration in its ARM926EJ-S architecture. These capabilities make the device more suitable than a basic controller for selected signal-processing and Java-oriented embedded workloads. Actual benefit depends on the algorithm, compiler support, memory system, and workload characteristics.

Dữ liệu tham khảo kỹ thuật cho AT91SAM9261-CJ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AT91SAM9261-CJ when maintaining an established SAM9261 design or building an industrial embedded system around a documented 190 MHz ARM926EJ-S core, 160 KB of configurable SRAM, integrated LCD control, DSP instructions, and Jazelle acceleration. Consider SAM9261S when its family continuity and documented pin compatibility make it the most practical drop-in migration path, subject to checking exact package, clock, electrical limits, and software support. Consider SAM9G10 when its device-specific resources provide a better long-term platform, but verify its exact ordering code and electrical characteristics before PCB reuse. The AT91SAM9X25-CU, AT91SAM9G35-CU, and SAM9X60 appear in comparison or substitute listings, but they are not established as pin-compatible drop-ins here. For any migration, review the complete ball map, memory interface, boot process, power sequencing, peripheral differences, and firmware support.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này SAM9G10 SAM9261S
Package 217-LFBGA (15 x 15 mm) 217-LFBGA (15 x 15 mm) 217-LFBGA (15 x 15 mm)
Brand Microchip Technology Microchip Technology Microchip Technology

Bảo phân biệt quan trọng

  • Established 190 MHz ARM926EJ-S performance target (vsSAM9G10)
  • SAM9261-family continuity for compatible upgrades (vsSAM9261S)
  • Integrated memory and graphics resources (vsSAM9G10)

Ghi chú thiết kế

Treat the 217-LFBGA land pattern as a high-density, high-speed PCB-design problem. Use the manufacturer ball map and recommended land pattern without altering ball numbering, and place input/output decoupling capacitors close to their associated power balls. The 15 x 15 mm package generally requires multilayer construction with short power and ground planes. Route external-memory and LCD interfaces as controlled-impedance nets, avoiding splits across plane boundaries and maintaining suitable length matching where required.

Map the boot-memory interface around the BMS pin before assigning the external bus. The bus matrix uses the reset state of BMS to determine boot-memory mapping, so incorrect routing or signal conditioning can prevent the processor from starting. Confirm the board revision against the datasheet boot diagram, preserve required pull states, and validate memory-device address, data-width, and timing settings with a boundary-scan or equivalent production test.

Estimated thermal planning must use the actual core voltage, I/O voltage, clock activity, external-memory traffic, and enabled peripherals because the device summary does not contain a complete current table. Derive worst-case dissipation from the manufacturer's operating-current curves, multiply current by the relevant supply voltage, and add power dissipated by external memory and support circuitry. Compare the resulting board temperature with the component's industrial temperature-grade requirement and the PCB's thermal design capability.

The 190 MHz ARM926EJ-S core and external memory interfaces require deliberate topology control. Keep the processor-to-memory traces short, use reference-plane-backed routing, minimize unnecessary vias, and apply the voltage and timing margins specified in the manufacturer electrical characteristics. Avoid routing clocks and high-speed buses alongside noisy switching or analog signals. Validate edge rates with an oscilloscope or protocol analyzer and use source termination where the selected memory interface requires it.

Do not treat every AT91SAM9261 ordering suffix as interchangeable with AT91SAM9261-CJ. The -CJ device is a 217-LFBGA variant, and the package, ball assignment, temperature grade, or ordering code may differ from other family members. Before a substitution, compare the complete ordering code, package drawing, electrical limits, boot configuration, memory interface, and required peripheral drivers. For SAM9G10 and SAM9261S, also verify the software migration requirements.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product page identifies an industrial-grade ARM926EJ-S processor but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this industrial microcontroller variant based on the stated temperature grade.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

at91sam9261 datasheet atmel at91sam9261 AT91SAM9261-CJ datasheet AT91SAM9261-CJ pinout AT91SAM9261-CJ datasheet pdf AT91SAM9261-CJ equivalent AT91SAM9261-CJ replacement AT91SAM9261-CJ cross reference AT91SAM9261-CJ vs SAM9G10 AT91SAM9261 190 MHz specifications AT91SAM9261 217 LFBGA footprint AT91SAM9261 industrial HMI AT91SAM9261-CJ price AT91SAM9261-CJ stock

Các bộ phận và thuật ngữ liên quan

Microchip Technology Atmel AT91SAM9261-CJ AT91SAM9261 SAM9G10 SAM9261S ARM926EJ-S ARM Thumb instruction set ARM Jazelle technology ARM9 processor architecture system-on-chip microcontroller embedded processor DSP instruction extensions tightly coupled memory TCM 160 KB SRAM 16 KB data cache 16 KB instruction cache 217-LFBGA 15 x 15 mm package graphics LCD controller bus matrix BMS pin industrial temperature grade
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ