ATSAM4S8CB-CN - 120MHz Cortex-M4 MCU 512KB Flash | Microchip
MPN: ATSAM4S8CB-CN ✓ Hoạt độngATSAM4S8CB-CN Tóm tắt
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable peripherals into one package. The ARM Cortex-M4 belongs to the ARM Cortex-M family of 32-bit cores designed for deterministic embedded applications; within the broader semiconductor hierarchy, microcontrollers sit alongside microprocessors in the digital IC category but add integrated Flash, RAM, and peripherals that simplify PCB design. The SAM4S series specifically targets industrial and consumer applications requiring low power, real-time control, and connectivity.
Key differentiating features include a 1.62 V to 3.6 V supply range, embedded 16 KB ROM with bootloader routines (UART, USB, I2C, SPI), a low-power RTC, and up to five 16-bit timers plus a full-speed USB 2.0 device port with on-chip transceiver. The device also offers two CAN 2.0A/B controllers, hardware cryptographic accelerators (AES, TRNG), and up to 79 programmable I/O lines. Extended temperature grade (CN suffix) supports -40 C to +105 C ambient operation.
From an architectural perspective, the ATSAM4S8C uses a multi-bus matrix connecting the Cortex-M4 core, SRAM, Flash, and peripheral DMA channels (PDC) for parallel data movement, reducing CPU stalls in data-intensive applications. The 120 MHz operation provides 150 DMIPS / 1.25 DMIPS/MHz, and the single-precision IEEE 754 FPU accelerates DSP algorithms. Built-in power-management features (Sleep, Wait, Backup modes with 1.5 uA typical RTC consumption) make the device suitable for battery-backed industrial nodes.
Typical applications include industrial automation controllers, smart energy metering, USB peripherals, CAN-connected automotive body electronics, point-of-sale terminals, and motor-control subsystems. The integrated 12-bit ADC and PWM timers also suit three-phase motor drives using sensorless or sensored algorithms.
Designers should plan for decoupling near the multiple VDD/VSS pin pairs and follow the trace-length guidelines for USB DP/DM lines to maintain signal integrity. Migration from older SAM3S, SAM3N, or SAM7S designs is supported by pin-to-pin compatible packages in the SAM4S family, easing hardware reuse.
This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design notes that go beyond what the manufacturer datasheet alone provides.
Bộ thay thế dễ dàng lắp đặt cho ATSAM4S8CB-CN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATSAM4S8CB-CN (cùng hình factor và footprint) — khác nhau ở Package, RoHS Status, ADC, DAC, Instruction Set.
ATSAM4S8CB-CFN
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ATSAM4S8CB-CFNR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAM4S16CB-CFN
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAM4S16CA-CFUR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAM4S16CA-CFN
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATSAMS70N19B-CN
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATSAM4S8CB-CN Tỷ lệ tối đa & tính chất điện
| Core | ARM Cortex-M4 with FPU |
| CPU Bit Width | 32-bit |
| Maximum Clock Speed | 120 MHz |
| Performance | 150 DMIPS / 1.25 DMIPS/MHz |
| Program Memory (Flash) | 512 KB |
| SRAM | 128 KB |
| ROM (Bootloader) | 16 KB embedded bootloader |
| Điện áp cung cấp | 1.62 V to 3.6 V |
| Operating Temperature (CN) | -40 C to +105 C (Extended) |
| Hộp | 100-ball TFBGA (9x9 mm) |
| Kiểu lắp đặt | Surface Mount |
| I/O Lines | Up to 79 programmable |
| ADC | 12-bit, up to 16 channels |
| DAC | 12-bit, 2 channels |
| Communication Interfaces | USB 2.0 FS Device, 2x CAN, USART/UART, SPI, TWI (I2C) |
| Timers | 5x 16-bit timers, RTC |
| DMA | Peripheral DMA Controller (PDC) |
| Hardware Crypto | AES, TRNG |
| Trạng thái RoHS | Compliant (Green) |
Hướng dẫn cấu hình chân ATSAM4S8CB-CN 100-ball tfbga (9x9 mm)
Cấu hình chân cho ATSAM4S8CB-CN (100-ball tfbga (9x9 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATSAM4S8CB-CN.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATSAM4S8CB-CN phù hợp cho 7 Áp dụngs: Industrial Automation Controllers, USB Peripherals and POS Terminals, Smart Energy Metering, CAN-Based Automotive Body Electronics, Three-Phase Motor Drives, IoT Edge Sensor Hubs, Medical Monitoring Devices.
Industrial Automation Controllers
The ATSAM4S8CB-CN fits industrial automation controllers because its 120 MHz Cortex-M4 with FPU executes deterministic control loops well within 1 ms cycle times, while 512 KB Flash stores full Modbus, EtherNet/IP, or PROFINET stacks. The two CAN 2.0A/B controllers connect directly to sensor-actuator fieldbuses without an external transceiver logic supply. Its 1.62 V to 3.6 V supply range tolerates wide 24 V industrial rail regulation down to 3.3 V. The extended -40 C to +105 C temperature grade (CN suffix) supports cabinet mounting near motors.
Được đề xuất
USB Peripherals and POS Terminals
The ATSAM4S8CB-CN is ideal for USB peripherals and POS terminals because it integrates a USB 2.0 Full-Speed Device port that needs no external PHY, saving PCB area and BOM cost. The 120 MHz core handles CCID smart-card stacks and encrypted PIN-pad operations within real-time budgets. AES hardware acceleration offloads TLS record-layer encryption, leaving the CPU free for display rendering and printer control. The 12-bit ADC reads analog keypad or battery-monitoring channels without an external ADC.
Được đề xuất
Smart Energy Metering
The ATSAM4S8CB-CN targets smart energy metering because its 12-bit ADC with up to 16 channels can sample voltage and current simultaneously at the rates needed for class-1 meter accuracy. The Cortex-M4 FPU accelerates DFT-based harmonic calculations in firmware without external DSP. The on-chip AES and TRNG secure DLMS/COSEM or wireless M-Bus communication. Low-power Backup mode (1.5 uA typical with RTC) preserves battery life during blackouts while logging outage events to Flash.
Được đề xuất
CAN-Based Automotive Body Electronics
The ATSAM4S8CB-CN suits CAN-based automotive body electronics because its two independent CAN controllers allow gateway functionality between body and powertrain buses. The 120 MHz Cortex-M4 core processes LIN slave stacks and CAN-FD frames concurrently. Extended -40 C to +105 C temperature grade handles under-dash thermal environments. Hardware AES acceleration secures diagnostic UDS sessions per ISO 14229. The 100-ball TFBGA package fits compact body-control modules behind dashboard panels.
Được đề xuất
Three-Phase Motor Drives
The ATSAM4S8CB-CN drives three-phase BLDC or PMSM motors thanks to its three 16-bit timer/counter units generating complementary PWM pairs with programmable dead-time insertion. The Cortex-M4 FPU executes field-oriented control (FOC) at update rates above 20 kHz. The 12-bit ADC synchronised to PWM edges samples phase currents with minimal delay. The 12-bit DAC provides adjustable reference voltages for gate-driver biasing.
Được đề xuất
IoT Edge Sensor Hubs
The ATSAM4S8CB-CN serves as an IoT edge sensor hub because the Cortex-M4 with FPU runs TensorFlow Lite Micro models for on-device inference without cloud round-trips. The 128 KB SRAM buffers pre-processed sensor data before transmission, and 512 KB Flash stores model weights plus application code. Multiple USART, SPI, and TWI interfaces aggregate sensors from various domains. Low-power Sleep and Backup modes extend battery life in remote installations.
Được đề xuất
Medical Monitoring Devices
The ATSAM4S8CB-CN supports medical monitoring devices such as pulse oximeters, glucose meters, and portable ECGs because the 12-bit ADC with 16 channels captures bioelectric signals while the Cortex-M4 DSP extensions compute heart-rate variability in firmware. Hardware AES secures patient data transmitted to mobile apps via USB or Bluetooth companion modules. The extended temperature range supports disinfection thermal cycles and tropical deployments.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATSAM4S8CB-CN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATSAM4S8CB-CFN | ATSAM4S16CB-CFN | ATSAM4S16CA-CFUR | ATSAM4S16CA-CFN | ATSAMS70N19B-CN |
|---|---|---|---|---|---|---|
| Package | 100-ball TFBGA (9x9 mm) | 100-ball TFBGA (9x9 mm) - same | 100-ball TFBGA (9x9 mm) - same | 100-ball TFBGA (9x9 mm) - same | 100-ball TFBGA (9x9 mm) - same | 100-ball TFBGA (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | Cortex-M4 120 MHz | Cortex-M4 120 MHz | Cortex-M4 120 MHz | Cortex-M4 120 MHz | Cortex-M4 120 MHz | Cortex-M4 300 MHz |
| Flash | 512 KB | 512 KB | 1024 KB | 1024 KB | 1024 KB | 2048 KB |
| SRAM | 128 KB | 128 KB | 160 KB | 160 KB | 160 KB | 384 KB |
| Supply Voltage | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V |
| Operating Temperature | -40 C to +105 C (CN extended) | -40 C to +85 C (CFN commercial) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +105 C |
| USB | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 HS Device + Host |
| CAN Controllers | 2 | 2 | 2 | 2 | 2 | 2 (CAN-FD) |
Bảo phân biệt quan trọng
- Extended -40 C to +105 C temperature grade in same TFBGA-100 footprint (vsATSAM4S8CB-CFN)
- Same Cortex-M4 core family, double Flash and SRAM within same footprint (vsATSAM4S16CB-CFN)
- 300 MHz Cortex-M4 upgrade path in the same TFBGA-100 footprint (vsATSAMS70N19B-CN)
Ghi chú thiết kế
Place a 100 nF X7R decoupling capacitor within 3 mm of every VDD/VSS pin pair on the 100-ball TFBGA, plus a single 4.7 uF bulk capacitor near the package corner. Use a continuous ground plane on layer 2 directly under the BGA to provide low-impedance return paths for high-speed signals such as USB DP/DM and the SPI clock traces.
Estimated: For USB DP/DM lines on the ATSAM4S8CB-CN, route 90-ohm differential impedance over a ground-referenced microstrip, keep total length under 50 mm, and place the ESD protection array within 3 mm of the connector. Series common-mode chokes are optional but recommended when the cable is detachable. Match trace lengths to within 150 mil to preserve eye-mask margin.
The 100-ball TFBGA package relies on the central ball grid for thermal dissipation. Connect the central balls to a copper pad on the top layer and stitch vias to the inner ground plane on a 1.2 mm grid. At 120 MHz active current draw of approximately 30 mA at 3.3 V, no external heatsink is required, but industrial enclosures above 60 C ambient benefit from additional copper area.
Do not forget to configure the NRST reset pin with the recommended 10 kohm pull-up and 100 nF capacitor combination; missing this causes erratic startup on some boards. Always program the GPNVM bits in Flash before relying on Flash secure-bit features, otherwise the bootloader may overwrite application code unexpectedly.
Keep the 32.768 kHz crystal traces short and symmetric, surrounded by a ground guard ring to limit noise coupling into the RTC domain. Place the main 12 MHz crystal within 5 mm of the XIN/XOUT pins. Avoid routing high-frequency switching signals (PWM outputs) directly under the crystal area to prevent jitter.
Thông tin tuân thủ
Green / RoHS-compliant per Microchip product page. Not AEC-Q100 qualified; CN suffix denotes extended temperature grade only, not automotive qualification.
