Microchip Technology

ATSAMD51P19A-AU - 120MHz ARM Cortex-M4F MCU | Microchip

MPN: ATSAMD51P19A-AU ✓ Hoạt động
3.3 V Vdss 128-pin TQFP Package 120 MHz Speed 512 KB Memory
MOQ: 1 |

ATSAMD51P19A-AU Tóm tắt

Microchip Technology ATSAMD51P19A-AU is a 32-bit ARM Cortex-M4F microcontroller operating up to 120 MHz, with a 512 KB flash memory and a 128-pin TQFP package measuring 14 mm by 14 mm. The device belongs to the SAM D51 series, a high-performance microcontroller family intended for general-purpose embedded applications. It combines a 32-bit processor core with floating-point unit support, embedded flash, peripheral interfaces, and a surface-mount package suitable for compact industrial and commercial control boards.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAMD51P19A-AU follows the hierarchy of embedded processor, 32-bit microcontroller, ARM Cortex-M microcontroller, and Cortex-M4F microcontroller. The FPU designation identifies hardware support for single-precision floating-point operations, which is useful for control algorithms, filtering, sensor processing, and other workloads that benefit from efficient numerical calculation without a separate math processor.

The principal device characteristics include a maximum CPU frequency of 120 MHz, 512 KB of flash organized as 512K by 8 bits, and a 128-pin TQFP package. The listed operating temperature extends to 85°C, and the device is identified with a 3.3 V supply in distributor technical listings. Its flash capacity provides room for boot code, application firmware, configuration data, and libraries while supporting field-oriented embedded product development.

The SAM D51 architecture is positioned between simple 8- and 16-bit control devices and higher-end application processors. Its 32-bit Cortex-M4F core supports general-purpose embedded control while retaining a compact footprint and a broad set of communication and timing functions. The 128-pin package provides substantially more device pins than a small 32-pin or 48-pin microcontroller, making it appropriate when a design requires a larger collection of I/O, communication, debug, or analog-control connections.

Typical uses include industrial monitoring, automation equipment, sensor acquisition, connected control panels, data acquisition modules, communications equipment, and embedded power or motor-control systems. The processor speed and floating-point capability are valuable for combining real-time control with protocol handling and higher-level application logic. A designer should confirm peripheral availability, pin multiplexing, operating voltage, and electrical limits against the manufacturer datasheet before assigning signals to the TQFP footprint.

PCB implementation requires a 128-pin land pattern, correct orientation, and careful decoupling. Place the device-side bypass capacitors close to their supply pins and route high-speed or sensitive signals away from switching nodes. Because the large TQFP package has many leads, assembly quality and solder-paste deposition are important; inspect exposed joints for bridging and verify continuity between adjacent pins after assembly.

This product page combines the exact manufacturer and distributor identifiers, package information, memory capacity, operating frequency, and replacement analysis with practical guidance for firmware integration and PCB implementation. It is designed to help engineers identify the correct ATSAMD51P19A-AU ordering option, assess same-package alternatives, and plan a reliable transition onto a 128-pin SAM D51 design.

Bộ thay thế dễ dàng lắp đặt cho ATSAMD51P19A-AU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATSAMD51P19A-AU (cùng hình factor và footprint) — khác nhau ở Package, ADC, SRAM, Core Architecture, USB.

Microchip Technology
Package: 128-TQFP (14x14 mm)
ADC: 12-bit, 1 MSPS, up to 16 channels
SRAM: 192 KB (with 8 KB TCM)
So sánh với ATSAMD51P19A-AU →
Microchip Technology
Package: 128-TQFP (14x14 mm)
USB: USB 2.0 Full-Speed with integrated PHY
So sánh với ATSAMD51P19A-AU →
Microchip Technology
Package: 128-TQFP (14 x 14 mm)
ADC: 12-bit, up to 1 MSPS
SRAM: 256 KB
So sánh với ATSAMD51P19A-AU →
Microchip Technology
Package: 100-pin TQFP (14x14 mm)
ADC: Up to 2x 12-bit, 1 MSPS
SRAM: 192 KB
So sánh với ATSAMD51P19A-AU →
Microchip Technology
Package: 128-TQFP (14x14 mm)
ADC: 12-bit SAR + 16-bit sigma-delta
SRAM: 128 KB (ECC)
So sánh với ATSAMD51P19A-AU →

ATSAMD51P19A-AU-EFP

✅ Drop-In
Microchip Technology
📦 128-pin TQFP (14x14 mm)
ARM Cortex-M4F · 32-bit · 120 MHz · Yes (single-precision) · Yes · 512 KB (512K x 8) with ECC · 192 KB · -40C to +85C

Liên hệ để biết giá

Xem tài liệu →

ATSAMD51P18A-AU

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 128-pin TQFP (14x14 mm)
Same Cortex-M4F SAM D51 platform and TQFP-128 footprint; flash capacity is 256 KB versus 512 KB, a 50% reduction

📋 Tham chiếu thay thế (không có trong danh mục)

ATSAMD51P20A-AUT

✅ Drop-In ⚠️ Thông số chưa được xác minh
Microchip Technology
📦 128-pin TQFP (14x14 mm)
ARM Cortex-M4F with FPU · 120 MHz · 1 MB (1M x 8) with ECC, dual-panel · 256 KB · 1.71 V to 3.63 V · 128-TQFP (14 x 14 mm) · 128 · 12-bit, up to 1 MSPS

Liên hệ để biết giá

Xem tài liệu →

ATSAMD51P19A-AFT

✅ Drop-In
Microchip Technology
📦 128-pin TQFP (14x14 mm)
ARM Cortex-M4F (with FPU) · 120 MHz · 512 KB (dual-panel with ECC) · 192 KB (with 8 KB TCM) · 1.71 V to 3.63 V · -40C to +125C (industrial) · 128-TQFP (14x14 mm) · 12-bit, 1 MSPS, up to 16 channels

Liên hệ để biết giá

Xem tài liệu →

ATSAMD51P19A-AU Tỷ lệ tối đa & tính chất điện

Product Type 32-bit ARM Cortex-M4F microcontroller
Series SAM D51
Maximum CPU Frequency 120 MHz
Processor Core ARM Cortex-M4F
Architecture 32-bit
Floating Point Unit Yes
Flash Memory 512 KB
Flash Organization 512K x 8 bits
Maximum Series Flash Capacity 1 MB
Flash ECC Supported by the SAM D51 series
Điện áp cung cấp 3.3 V
Maximum Operating Temperature 85°C
Hộp 128-pin TQFP
Package Dimensions 14 mm x 14 mm
Kiểu lắp đặt Surface mount
USB Support USB
Target Applications General-purpose embedded applications

Hướng dẫn cấu hình chân ATSAMD51P19A-AU 14 mm x 14 mm

Cấu hình chân cho ATSAMD51P19A-AU (14 mm x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 14 mm x 14 mm cho ATSAMD51P19A-AU

Không có dữ liệu chân cụ thể sẵn có cho ATSAMD51P19A-AU.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ATSAMD51P19A-AU phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Sensor Acquisition Gateway, Connected Data Acquisition Module, Motor Control and Monitoring, Communications Equipment, Precision Measurement and Control.

🏭

Industrial Automation Controller

The ATSAMD51P19A-AU fits industrial automation controllers that combine real-time I/O, communications, and application firmware in one 128-pin device. Its ARM Cortex-M4F core runs up to 120 MHz and includes hardware floating-point support, allowing control loops and communication tasks to coexist more effectively than on a basic 8- or 16-bit controller. The 512 KB flash provides room for protocols, motion or logic control, diagnostics, and field updates, while the TQFP package exposes a broad pin count for sensors and actuators. Validate industrial temperature, EMC, isolation, and qualification requirements at the system level.

🧩

Sensor Acquisition Gateway

ATSAMD51P19A-AU is appropriate for a multi-channel sensor gateway that must acquire measurements, filter data, and forward results through embedded communications. The 120 MHz Cortex-M4F core provides enough throughput for digital filtering and protocol handling, while the FPU assists with arithmetic associated with sensor compensation. Its 128-pin TQFP package provides a large peripheral connection set relative to smaller microcontroller packages, and 512 KB of flash can hold application code and communication stacks. Exact analog-channel counts and converter performance must be confirmed in the device documentation before sensor-node design begins.

🌐

Connected Data Acquisition Module

The ATSAMD51P19A-AU can serve as the control core of a connected data-acquisition module that must collect digital or analog sensor information, execute local processing, and communicate with a host. Its 32-bit Cortex-M4F architecture supports more demanding firmware than a small microcontroller while retaining a compact embedded form factor. The 512 KB flash accommodates drivers, protocol stacks, buffering logic, and application code, and the 120 MHz operating frequency enables concurrent acquisition and communications tasks. Plan USB, serial, or other interface routing around the selected pin multiplexing and preserve signal integrity with short, properly terminated connections.

⚡

Motor Control and Monitoring

ATSAMD51P19A-AU is suitable for supervisory motor-control and monitoring equipment that combines low-speed logic, communications, diagnostics, and possibly real-time control functions. The Cortex-M4F processor’s floating-point support is useful for current, speed, and position calculations, while the 120 MHz clock rate leaves processing headroom for control and status reporting. The 128-pin TQFP footprint offers many signal connections compared with compact 32-pin devices, although external power devices, gate drivers, and protection components remain necessary for high-current motor stages. Review pin multiplexing and timing before assigning pulse-width-modulation or capture functions.

🌐

Communications Equipment

The ATSAMD51P19A-AU fits communication equipment requiring a capable embedded processor, local protocol handling, and a broad set of serial or digital interfaces. Its 120 MHz Cortex-M4F core can manage framing, buffering, diagnostics, and configurable communications tasks, while 512 KB of flash supports embedded stacks and application firmware. The large 128-pin TQFP package provides more peripheral assignment flexibility than small-outline MCUs, which can simplify board partitioning when UART, SPI, USB, timers, and status signals are required. Verify the availability, alternate functions, and operating behavior of every communication peripheral in the manufacturer pin table.

🔧

Precision Measurement and Control

ATSAMD51P19A-AU is appropriate for measurement instruments that require deterministic embedded control alongside data processing and user-facing communications. The Cortex-M4F core supports floating-point calculations used in calibration, filtering, and unit conversion, while the 120 MHz maximum frequency allows responsive sampling and control-loop execution. Its 512 KB flash provides storage for control code, calibration tables, and communication routines, and the 128-pin package offers extensive I/O for sensors, displays, and digital interfaces. Analog accuracy depends on the selected converters, references, analog front end, layout, and calibration rather than the microcontroller core alone.

What is the ATSAMD51P19A-AU?
The ATSAMD51P19A-AU is a Microchip Technology 32-bit ARM Cortex-M4F microcontroller in the SAM D51 series. It operates up to 120 MHz, contains 512 KB of flash memory organized as 512K by 8 bits, and is packaged in a 128-pin TQFP measuring 14 mm by 14 mm. According to the Microchip product page, the SAM D51 family is targeted at general-purpose applications using a Cortex-M4 processor with a Floating Point Unit.
What are the key specifications of ATSAMD51P19A-AU that engineers should know?
The key ATSAMD51P19A-AU specifications are a 120 MHz maximum clock, a 32-bit ARM Cortex-M4F core with floating-point support, 512 KB of flash memory, and a 128-pin TQFP package. The listed operating temperature reaches 85°C, and distributor listings identify a 3.3 V device. DigiKey describes the memory as 512K by 8 bits, while the Microchip product page identifies ATSAMD51P19A as part of the SAM D51 family.
Where can I download the ATSAMD51P19A-AU datasheet PDF?
The ATSAMD51P19A-AU datasheet should be obtained through the official Microchip product page for ATSAMD51P19A. That page identifies the complete SAM D51 device family and is the authoritative starting point for electrical characteristics, pin multiplexing, package drawings, memory maps, and programming information. The exact 128-pin ATSAMD51P19A-AU ordering code should be selected when opening the manufacturer documentation for the device.
Where can I find the ATSAMD51P19A-AU pinout?
The ATSAMD51P19A-AU pinout is published for the 128-pin TQFP package, and the complete pin table is available through the Microchip documentation for ATSAMD51P19A. The package drawing and pin-description table should be used to assign power, ground, reset, programming, debug, communications, and peripheral signals. Use the TQFP-128 package drawing when creating the PCB footprint and verify each signal’s alternate-function mapping in the datasheet.
What can replace ATSAMD51P19A-AU on the same PCB?
ATSAMD51P19A-AU-EFP is the closest documented same-package replacement because it retains the Microchip CM4 architecture, 512 KB flash, USB capability, TQFP-128 package, and tray packaging while adding Extended Flash Performance. ATSAMD51P18A-AU and ATSAMD51P20A-AU are same-family TQFP options with different flash capacities. Firmware, timing, memory-map, and qualification requirements must still be reviewed before substituting any option.
Is ATSAMD51P19A-AU-EFP pin compatible with ATSAMD51P19A-AU?
ATSAMD51P19A-AU-EFP is presented as a CM4, TQFP-128 device with 512 KB flash and USB, making it a same-package candidate for ATSAMD51P19A-AU. Its defining change is Extended Flash Performance. Before treating it as a drop-in replacement, confirm that the supported operating modes, flash characteristics, power behavior, and application requirements do not alter the original system design.
Is ATSAMD51P19A-AU suitable for industrial control systems?
ATSAMD51P19A-AU is suitable for many industrial control applications that fit its 120 MHz Cortex-M4F performance, 512 KB flash capacity, and 128-pin I/O capability. The listed maximum operating temperature of 85°C covers many industrial environments. Industrial suitability still depends on the required temperature grade, isolation, EMC performance, long-term availability, and qualification requirements of the complete product.
What can I replace ATSAMD51P19A-AU with?
The most credible replacement is ATSAMD51P19A-AU-EFP, a same-family Microchip device with the same 120 MHz-class CM4 platform, 512 KB flash, USB feature, and TQFP-128 package. Same-family alternatives ATSAMD51P18A-AU and ATSAMD51P20A-AU use 256 KB and 1 MB flash respectively. Exact replacement status depends on the required flash capacity, peripheral configuration, timing, qualification, and software compatibility.
ATSAMD51P19A-AU vs ATSAMD51P20A-AU: which is better?
ATSAMD51P19A-AU and ATSAMD51P20A-AU share the 120 MHz Cortex-M4F SAM D51 architecture and 128-pin TQFP format, but their flash capacities differ. ATSAMD51P19A-AU provides 512 KB, while ATSAMD51P20A-AU provides 1 MB. Choose ATSAMD51P19A-AU when 512 KB is sufficient; choose ATSAMD51P20A-AU when larger firmware, data storage, or future code growth justifies the additional memory.
When should I choose ATSAMD51P19A-AU over ATSAMD51P18A-AU?
Choose ATSAMD51P19A-AU over ATSAMD51P18A-AU when the application needs more than the smaller family member’s 256 KB flash while remaining below 1 MB. Both use the same Cortex-M4F SAM D51 platform and 128-pin TQFP format, so the decision commonly centers on firmware size, update requirements, and future feature growth rather than a change in processor class.
How much power and ground connectivity does the ATSAMD51P19A-AU require?
The ATSAMD51P19A-AU requires the supply, ground, and decoupling connections defined for its exact 128-pin package in the manufacturer datasheet. Place decoupling capacitors close to the associated power pins, provide a low-impedance ground return, and route sensitive analog or communications signals away from switching circuitry. The datasheet’s decoupling and layout sections should define the required capacitor values and placement.
Where can I buy ATSAMD51P19A-AU and check its lead time?
Use the Request a Quote form on this page to ask for ATSAMD51P19A-AU pricing, current stock, minimum order quantity, and lead time. The exact ordering code includes the 128-pin TQFP package and tray presentation, so include the full ATSAMD51P19A-AU MPN in the request. Packaging or grade requirements should also be stated to obtain an accurate commercial response.
What is the price of ATSAMD51P19A-AU?
The current price of ATSAMD51P19A-AU should be requested through the Request a Quote form on this page. Because quantity and supply conditions can change, request pricing for the quantity, packaging, and target delivery date required for your build. The full MPN ATSAMD51P19A-AU should be included so the quote corresponds to the 128-pin TQFP device and tray ordering option.
Is ATSAMD51P19A-AU in stock?
Current ATSAMD51P19A-AU inventory should be confirmed through the Request a Quote form on this page. Submit the required quantity, target date, and acceptable packaging in the request so procurement can confirm supply without relying on a stale listing. If the device is not immediately available, the same request can identify the current lead time and any permitted schedule options.
What is the lead time for ATSAMD51P19A-AU?
The current lead time for ATSAMD51P19A-AU depends on order quantity and manufacturing availability. Use the Request a Quote form on this page and state the required quantity, shipment destination, and requested delivery date. Supply confirmation for the exact 128-pin TQFP ordering code is preferable to relying on generic SAM D51 lead-time statements because package and volume can affect scheduling.
What development tools support ATSAMD51P19A-AU?
ATSAMD51P19A-AU is supported through Microchip’s SAM D51 programming and development ecosystem, including compatible debug adapters, programmers, and IDE workflows for ARM Cortex-M devices. The exact tool configuration depends on the debugger, programming interface, and firmware architecture selected for the board. Consult Microchip’s device support and programming documentation before fixing the PCB programming connector and SWD or debug layout.

Dữ liệu tham khảo kỹ thuật cho ATSAMD51P19A-AU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ATSAMD51P19A-AU when a 128-pin SAM D51 design needs a 120 MHz Cortex-M4F processor, hardware floating-point support, and 512 KB of flash without requiring the increased flash performance identified for ATSAMD51P19A-AU-EFP. ATSAMD51P18A-AU is appropriate when 256 KB is sufficient and the board must fit the same family and package, but its flash capacity is half that of the target device. ATSAMD51P20A-AU is preferable when firmware growth, data storage, or future feature additions make 1 MB of flash more valuable than minimizing resources. ATSAMD51P19A-AFT offers another 512 KB ordering option in the same family, but its exact temperature and packaging interpretation must be confirmed before procurement. In every case, verify pin multiplexing, supply requirements, memory layout, programming configuration, qualification, and lifecycle expectations in the manufacturer documentation.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ATSAMD51P19A-AU-EFP ATSAMD51P18A-AU ATSAMD51P20A-AU ATSAMD51P19A-AFT
Package 128-pin TQFP (14x14 mm) 128-pin TQFP (14x14 mm) 128-pin TQFP (14x14 mm) 128-pin TQFP (14x14 mm) 128-pin TQFP (14x14 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core 32-bit ARM Cortex-M4F 32-bit ARM Cortex-M4F 32-bit ARM Cortex-M4F 32-bit ARM Cortex-M4F 32-bit ARM Cortex-M4F
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 512 KB 512 KB 256 KB 1 MB 512 KB
Floating Point Unit Yes Yes Yes Yes Yes
Series SAM D51 SAM D51 SAM D51 SAM D51 SAM D51

Bảo phân biệt quan trọng

  • Balanced 512 KB flash capacity (vsATSAMD51P18A-AU)
  • Larger code and data storage without changing processor class (vsATSAMD51P20A-AU)
  • Extended Flash Performance option in the same 512 KB TQFP-128 family (vsATSAMD51P19A-AU-EFP)

Ghi chú thiết kế

Create the board footprint from the manufacturer’s 128-pin TQFP drawing rather than inferring dimensions from a generic TQFP library. Confirm pin-1 orientation, exposed-pad requirements, courtyard clearance, and solder-mask geometry. Because ATSAMD51P19A-AU has many leads, use a paste volume appropriate for fine-pitch assembly and inspect for bridging. Maintain adequate copper around thermal and power paths without compromising assembly tolerances.

Place all required bypass capacitors close to their associated ATSAMD51P19A-AU supply pins and connect each capacitor’s ground return directly to a low-impedance ground plane. Follow the manufacturer’s recommended capacitance, voltage rating, and ESR requirements for every supply rail. Estimate the worst-case rail current before adding bulk capacitance, and separate noisy switching-converter output from sensitive analog or communication rails to prevent supply ripple from disturbing sampling and control behavior.

Use the manufacturer pin table to confirm alternate functions before routing interfaces such as USB, serial, SPI, timers, or debug signals. Keep sensitive analog inputs away from high-speed digital nets and switching-power nodes, provide a continuous ground reference under signal paths, and terminate externally driven interfaces according to their voltage, impedance, and timing requirements. Validate the final layout with signal-integrity and EMC testing because the 128-pin package alone does not determine system-level performance.

Do not treat ATSAMD51P19A-AU, ATSAMD51P19A-AU-EFP, and other same-package options as automatically interchangeable in production. Check flash capacity, Extended Flash Performance behavior, temperature grade, packaging, firmware image layout, boot configuration, and qualification. After substitution, rebuild the project with the new device definition, erase and reprogram nonvolatile memory as directed, and perform boundary tests on timing, communications, reset behavior, and low-power modes.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were present in the product information used for this page. Microchip identifies ATSAMD51P19A as a SAM D51 family device supporting up to 120 MHz, dual-panel flash with ECC, and USB within the family description.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ATSAMD51P19A-AU datasheet ATSAMD51P19A-AU pinout ATSAMD51P19A-AU datasheet pdf ATSAMD51P19A-AU specifications ATSAMD51P19A-AU TQFP-128 ATSAMD51P19A-AU equivalent ATSAMD51P19A-AU replacement ATSAMD51P19A-AU cross reference ATSAMD51P19A-AU vs ATSAMD51P20A-AU ATSAMD51P19A-AU footprint ATSAMD51P19A-AU application circuit ATSAMD51P19A-AU price ATSAMD51P19A-AU stock Microchip ATSAMD51P19A-AU

Các bộ phận và thuật ngữ liên quan

Microchip Technology ATSAMD51P19A-AU ATSAMD51P19A-AU-EFP ATSAMD51P18A-AU ATSAMD51P20A-AU ATSAMD51P19A-AFT SAM D51 ARM Cortex-M4F ARM Cortex-M4 32-bit microcontroller embedded processor semiconductor floating-point unit Flash memory dual-panel flash ECC USB TQFP-128 14 mm x 14 mm package surface-mount package general-purpose embedded control industrial automation sensor acquisition data acquisition motor control
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ