ATSAMD51P19A-AU - 120MHz ARM Cortex-M4F MCU | Microchip
MPN: ATSAMD51P19A-AU ✓ فعالATSAMD51P19A-AU جائزہ
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAMD51P19A-AU follows the hierarchy of embedded processor, 32-bit microcontroller, ARM Cortex-M microcontroller, and Cortex-M4F microcontroller. The FPU designation identifies hardware support for single-precision floating-point operations, which is useful for control algorithms, filtering, sensor processing, and other workloads that benefit from efficient numerical calculation without a separate math processor.
The principal device characteristics include a maximum CPU frequency of 120 MHz, 512 KB of flash organized as 512K by 8 bits, and a 128-pin TQFP package. The listed operating temperature extends to 85°C, and the device is identified with a 3.3 V supply in distributor technical listings. Its flash capacity provides room for boot code, application firmware, configuration data, and libraries while supporting field-oriented embedded product development.
The SAM D51 architecture is positioned between simple 8- and 16-bit control devices and higher-end application processors. Its 32-bit Cortex-M4F core supports general-purpose embedded control while retaining a compact footprint and a broad set of communication and timing functions. The 128-pin package provides substantially more device pins than a small 32-pin or 48-pin microcontroller, making it appropriate when a design requires a larger collection of I/O, communication, debug, or analog-control connections.
Typical uses include industrial monitoring, automation equipment, sensor acquisition, connected control panels, data acquisition modules, communications equipment, and embedded power or motor-control systems. The processor speed and floating-point capability are valuable for combining real-time control with protocol handling and higher-level application logic. A designer should confirm peripheral availability, pin multiplexing, operating voltage, and electrical limits against the manufacturer datasheet before assigning signals to the TQFP footprint.
PCB implementation requires a 128-pin land pattern, correct orientation, and careful decoupling. Place the device-side bypass capacitors close to their supply pins and route high-speed or sensitive signals away from switching nodes. Because the large TQFP package has many leads, assembly quality and solder-paste deposition are important; inspect exposed joints for bridging and verify continuity between adjacent pins after assembly.
This product page combines the exact manufacturer and distributor identifiers, package information, memory capacity, operating frequency, and replacement analysis with practical guidance for firmware integration and PCB implementation. It is designed to help engineers identify the correct ATSAMD51P19A-AU ordering option, assess same-package alternatives, and plan a reliable transition onto a 128-pin SAM D51 design.
کے لیے ڈراپ اِن متبادل ATSAMD51P19A-AU — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATSAMD51P19A-AU (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, SRAM, Core Architecture, USB.
ATSAMD51P19A-AU-EFP
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATSAMD51P18A-AU
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATSAMD51P20A-AUT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATSAMD51P19A-AFT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATSAMD51P19A-AU زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Series | SAM D51 |
| Maximum CPU Frequency | 120 MHz |
| Processor Core | ARM Cortex-M4F |
| Architecture | 32-bit |
| Floating Point Unit | Yes |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Maximum Series Flash Capacity | 1 MB |
| Flash ECC | Supported by the SAM D51 series |
| سپلائی وولٹیج | 3.3 V |
| Maximum Operating Temperature | 85°C |
| پیکیج | 128-pin TQFP |
| Package Dimensions | 14 mm x 14 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| USB Support | USB |
| Target Applications | General-purpose embedded applications |
ATSAMD51P19A-AU 14 mm x 14 mm پن کنفیگریشن گائیڈ
ATSAMD51P19A-AU (14 mm x 14 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATSAMD51P19A-AU.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ATSAMD51P19A-AU کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Controller, Sensor Acquisition Gateway, Connected Data Acquisition Module, Motor Control and Monitoring, Communications Equipment, Precision Measurement and Control.
Industrial Automation Controller
The ATSAMD51P19A-AU fits industrial automation controllers that combine real-time I/O, communications, and application firmware in one 128-pin device. Its ARM Cortex-M4F core runs up to 120 MHz and includes hardware floating-point support, allowing control loops and communication tasks to coexist more effectively than on a basic 8- or 16-bit controller. The 512 KB flash provides room for protocols, motion or logic control, diagnostics, and field updates, while the TQFP package exposes a broad pin count for sensors and actuators. Validate industrial temperature, EMC, isolation, and qualification requirements at the system level.
تجویز کردہ
Sensor Acquisition Gateway
ATSAMD51P19A-AU is appropriate for a multi-channel sensor gateway that must acquire measurements, filter data, and forward results through embedded communications. The 120 MHz Cortex-M4F core provides enough throughput for digital filtering and protocol handling, while the FPU assists with arithmetic associated with sensor compensation. Its 128-pin TQFP package provides a large peripheral connection set relative to smaller microcontroller packages, and 512 KB of flash can hold application code and communication stacks. Exact analog-channel counts and converter performance must be confirmed in the device documentation before sensor-node design begins.
تجویز کردہ
Connected Data Acquisition Module
The ATSAMD51P19A-AU can serve as the control core of a connected data-acquisition module that must collect digital or analog sensor information, execute local processing, and communicate with a host. Its 32-bit Cortex-M4F architecture supports more demanding firmware than a small microcontroller while retaining a compact embedded form factor. The 512 KB flash accommodates drivers, protocol stacks, buffering logic, and application code, and the 120 MHz operating frequency enables concurrent acquisition and communications tasks. Plan USB, serial, or other interface routing around the selected pin multiplexing and preserve signal integrity with short, properly terminated connections.
تجویز کردہ
Motor Control and Monitoring
ATSAMD51P19A-AU is suitable for supervisory motor-control and monitoring equipment that combines low-speed logic, communications, diagnostics, and possibly real-time control functions. The Cortex-M4F processor’s floating-point support is useful for current, speed, and position calculations, while the 120 MHz clock rate leaves processing headroom for control and status reporting. The 128-pin TQFP footprint offers many signal connections compared with compact 32-pin devices, although external power devices, gate drivers, and protection components remain necessary for high-current motor stages. Review pin multiplexing and timing before assigning pulse-width-modulation or capture functions.
تجویز کردہ
Communications Equipment
The ATSAMD51P19A-AU fits communication equipment requiring a capable embedded processor, local protocol handling, and a broad set of serial or digital interfaces. Its 120 MHz Cortex-M4F core can manage framing, buffering, diagnostics, and configurable communications tasks, while 512 KB of flash supports embedded stacks and application firmware. The large 128-pin TQFP package provides more peripheral assignment flexibility than small-outline MCUs, which can simplify board partitioning when UART, SPI, USB, timers, and status signals are required. Verify the availability, alternate functions, and operating behavior of every communication peripheral in the manufacturer pin table.
تجویز کردہ
Precision Measurement and Control
ATSAMD51P19A-AU is appropriate for measurement instruments that require deterministic embedded control alongside data processing and user-facing communications. The Cortex-M4F core supports floating-point calculations used in calibration, filtering, and unit conversion, while the 120 MHz maximum frequency allows responsive sampling and control-loop execution. Its 512 KB flash provides storage for control code, calibration tables, and communication routines, and the 128-pin package offers extensive I/O for sensors, displays, and digital interfaces. Analog accuracy depends on the selected converters, references, analog front end, layout, and calibration rather than the microcontroller core alone.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ATSAMD51P19A-AU — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ATSAMD51P19A-AU-EFP | ATSAMD51P18A-AU | ATSAMD51P20A-AU | ATSAMD51P19A-AFT |
|---|---|---|---|---|---|
| Package | 128-pin TQFP (14x14 mm) | 128-pin TQFP (14x14 mm) | 128-pin TQFP (14x14 mm) | 128-pin TQFP (14x14 mm) | 128-pin TQFP (14x14 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | 32-bit ARM Cortex-M4F | 32-bit ARM Cortex-M4F | 32-bit ARM Cortex-M4F | 32-bit ARM Cortex-M4F | 32-bit ARM Cortex-M4F |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 512 KB | 512 KB | 256 KB | 1 MB | 512 KB |
| Floating Point Unit | Yes | Yes | Yes | Yes | Yes |
| Series | SAM D51 | SAM D51 | SAM D51 | SAM D51 | SAM D51 |
اہم امتیازی خصوصیات
- Balanced 512 KB flash capacity (بمقابلہATSAMD51P18A-AU)
- Larger code and data storage without changing processor class (بمقابلہATSAMD51P20A-AU)
- Extended Flash Performance option in the same 512 KB TQFP-128 family (بمقابلہATSAMD51P19A-AU-EFP)
ڈیزائن نوٹس
Create the board footprint from the manufacturer’s 128-pin TQFP drawing rather than inferring dimensions from a generic TQFP library. Confirm pin-1 orientation, exposed-pad requirements, courtyard clearance, and solder-mask geometry. Because ATSAMD51P19A-AU has many leads, use a paste volume appropriate for fine-pitch assembly and inspect for bridging. Maintain adequate copper around thermal and power paths without compromising assembly tolerances.
Place all required bypass capacitors close to their associated ATSAMD51P19A-AU supply pins and connect each capacitor’s ground return directly to a low-impedance ground plane. Follow the manufacturer’s recommended capacitance, voltage rating, and ESR requirements for every supply rail. Estimate the worst-case rail current before adding bulk capacitance, and separate noisy switching-converter output from sensitive analog or communication rails to prevent supply ripple from disturbing sampling and control behavior.
Use the manufacturer pin table to confirm alternate functions before routing interfaces such as USB, serial, SPI, timers, or debug signals. Keep sensitive analog inputs away from high-speed digital nets and switching-power nodes, provide a continuous ground reference under signal paths, and terminate externally driven interfaces according to their voltage, impedance, and timing requirements. Validate the final layout with signal-integrity and EMC testing because the 128-pin package alone does not determine system-level performance.
Do not treat ATSAMD51P19A-AU, ATSAMD51P19A-AU-EFP, and other same-package options as automatically interchangeable in production. Check flash capacity, Extended Flash Performance behavior, temperature grade, packaging, firmware image layout, boot configuration, and qualification. After substitution, rebuild the project with the new device definition, erase and reprogram nonvolatile memory as directed, and perform boundary tests on timing, communications, reset behavior, and low-power modes.
تعمیل کی معلومات
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were present in the product information used for this page. Microchip identifies ATSAMD51P19A as a SAM D51 family device supporting up to 120 MHz, dual-panel flash with ECC, and USB within the family description.