ATSAMV71N21B-CB - 300MHz Cortex-M7 MCU | Microchip
MPN: ATSAMV71N21B-CB ✓ Hoạt độngATSAMV71N21B-CB Tóm tắt
An automotive flash microcontroller is a semiconductor device that executes embedded control software from nonvolatile program memory while integrating peripherals for communications, timing, data acquisition, and digital control. Within the product hierarchy, the ATSAMV71N21B-CB is an ARM Cortex-M7 microcontroller, a 32-bit embedded processor within the SAM V71 automotive MCU family and the broader microcontrollers category.
The principal device attributes are a 300 MHz maximum operating frequency, 2 MB of flash memory, a Cortex-M7 core with double-precision FPU, and a 100-TFBGA package. These specifications suit applications requiring substantial control-loop calculation, connected equipment, graphical or communications support, and deterministic real-time behavior. The target is identified as an automotive-grade flash MCU, while the B suffix denotes the device configuration identified by Microchip.
The Cortex-M7 architecture supports efficient real-time execution, while the floating-point unit accelerates mathematical operations commonly found in motor control, signal processing, communications, and industrial automation. The 2 MB embedded flash provides room for application code, configuration data, and boot routines. The 100-TFBGA package also supports high-density PCB integration, although its fine ball pitch requires careful component placement and board-layout planning.
Typical applications include industrial automation, networked control equipment, motor-control systems, communications gateways, and embedded human-machine-interface controllers. The high clock rate and floating-point capability benefit applications that combine peripheral handling with computationally intensive control tasks. Automotive qualification requirements should also be checked against the complete system design rather than assumed from the family description alone.
PCB implementation requires attention to high-speed signal integrity, clean power and ground distribution, and thermal performance at the 9 x 9 mm TFBGA. Decoupling capacitors should be placed directly beside the relevant supply pins, and routing should minimize loops through supply-return paths. Firmware development is supported by the Microchip MPLAB X environment identified for the ATSAMV71N21B and ATSAMV71N21B families.
This product page consolidates the manufacturer family description, package details, sourcing information, verified drop-in alternatives, application guidance, and design considerations. It also distinguishes confirmed package-compatible options from comparison candidates that would require a different footprint or an engineering review before substitution.
Bộ thay thế dễ dàng lắp đặt cho ATSAMV71N21B-CB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
ATSAMV71N19B-CB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATSAMV71N21B-CB Tỷ lệ tối đa & tính chất điện
| Product Type | Automotive Flash Microcontroller |
| Processor Core | ARM Cortex-M7 |
| Architecture | 32-bit |
| Maximum CPU Frequency | 300 MHz |
| Floating-Point Unit | Double Precision FPU |
| Flash Memory | 2 MB (2M x 8 bits) |
| Hộp | 100-TFBGA (9 x 9 mm) |
| Core Count | 1 |
| Product Family | SAM V71 |
| Kiểu bộ nhớ | Flash |
| Device Variant | ATSAMV71N21B |
| Development Environment | MPLAB X IDE |
| Programming Language Support | C and C++ via MPLAB XC32 compilers |
| Kiểu lắp đặt | Surface Mount |
| Automotive Qualification | AEC-Q100 automotive family |
Hướng dẫn cấu hình chân ATSAMV71N21B-CB 100-tfbga (9 x 9 mm)
Cấu hình chân cho ATSAMV71N21B-CB (100-tfbga (9 x 9 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATSAMV71N21B-CB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATSAMV71N21B-CB phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Motor Control System, Industrial Communications Gateway, Connected Automotive Control Unit, Embedded Data Acquisition System, Embedded Human-Machine Interface.
Industrial Automation Controller
The ATSAMV71N21B-CB fits industrial automation controllers that must coordinate sensors, actuators, communications, and real-time control tasks in one device. Its 300 MHz ARM Cortex-M7 core provides computational headroom, while the double-precision FPU accelerates control calculations that benefit from floating-point arithmetic. The 2 MB flash capacity provides substantially more embedded program space than the 512 KB ATSAMV71N19B-CB comparison part, supporting larger protocols, diagnostics, and application layers. In a controller design, the MCU would supervise acquisition and actuation loops while handling network traffic and local safety monitoring.
Được đề xuất
Motor Control System
The ATSAMV71N21B-CB is suitable for sophisticated motor-control platforms requiring rapid sampling, deterministic computation, and substantial firmware capability. The Cortex-M7 core operates at up to 300 MHz, and its double-precision FPU supports transforms, filters, and control calculations commonly used in field-oriented motor algorithms. With 2 MB of flash, firmware can combine control routines, parameter management, communications, and fault logging. Compared with the 512 KB ATSAMV71N19B-CB, the target offers 1.5 MB more flash, which can reduce the need for external program-memory expansion.
Được đề xuất
Industrial Communications Gateway
The ATSAMV71N21B-CB can serve as the control processor in an industrial communications gateway that must manage multiple data paths and local real-time functions. Its 300 MHz Cortex-M7 performance supports protocol processing alongside background application logic, and the 2 MB flash stores firmware, network parameters, certificates or identifiers, and diagnostic data without requiring a separate external flash device. The 100-TFBGA package supports compact board integration, although fine-pitch assembly and signal-integrity work are essential when combining high-speed communication routing with dense power distribution.
Được đề xuất
Connected Automotive Control Unit
The ATSAMV71N21B-CB fits a connected automotive control unit that combines real-time processing with communications and diagnostics. Its automotive SAM V71 positioning provides a platform for applications that value the 300 MHz Cortex-M7 core, double-precision floating-point capability, and 2 MB of embedded flash. The available flash can accommodate layered firmware, communication stacks, secure data, and event logging while the controller coordinates vehicle-side networks. Engineering validation should confirm the exact ordering variant, temperature range, qualification status, and safety requirements before production release.
Được đề xuất
Embedded Data Acquisition System
The ATSAMV71N21B-CB is appropriate for a high-speed embedded data-acquisition system where filtering, calibration, buffering, and control must coexist. The 300 MHz ARM Cortex-M7 processor provides capacity for computationally intensive signal routines, and the double-precision FPU improves the efficiency of filtering and mathematical transforms. Its 2 MB flash gives firmware designers considerably more room than the 512 KB ATSAMV71N19B-CB for acquisition software, configuration data, and calibration tables. The 100-TFBGA package also allows the controller to sit close to analog and interface circuitry on a compact instrument board.
Được đề xuất
Embedded Human-Machine Interface
The ATSAMV71N21B-CB can support an embedded human-machine interface that coordinates display updates, input handling, communications, and application control. Its 300 MHz Cortex-M7 core provides sufficient performance for responsive graphical or touch-oriented control logic, while the double-precision FPU assists with scaling and signal-processing tasks. The 2 MB of flash allows room for interface firmware, assets, protocol code, and configuration data, giving designers more capacity than the ATSAMV71N19B-CB. A 100-TFBGA implementation requires careful escape routing and component placement around the display connector and touch interface.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATSAMV71N21B-CB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATSAMV71N19B-CB |
|---|---|---|
| Package | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Processor Core | ARM Cortex-M7 | ARM Cortex-M7 |
| Maximum CPU Frequency | 300 MHz | 300 MHz |
| Flash Memory | 2 MB | 512 KB |
| Floating-Point Unit | Double Precision FPU | Double Precision FPU |
| Architecture | 32-bit | 32-bit |
| Core Count | 1 | 1 |
| Product Family | SAM V71 | SAM V71 |
| Development Environment | MPLAB X IDE | MPLAB X IDE |
Bảo phân biệt quan trọng
- Four times the flash capacity of the package-compatible lower-memory variant (vsATSAMV71N19B-CB)
- Retains the high-performance Cortex-M7 computing platform (vsATSAMV71N19B-CB)
- Maintains the same 100-TFBGA board footprint class (vsATSAMV71N19B-CB)
Ghi chú thiết kế
Design the board around the exact 100-TFBGA land pattern rather than a generic 100-BGA footprint. Verify ball assignments, ball-pitch geometry, solder-mask clearance, via dimensions, and component-placement rules against the Microchip package drawing. Because the package is only 9 x 9 mm, escape routing can become congested when the design combines high-speed interfaces, multiple supply domains, and dense external memory.
Place every required decoupling capacitor directly between the relevant power ball and its associated ground reference. Keep supply and ground connections short, use wide traces or planes where space permits, and avoid placing noisy switching loops beneath sensitive signal paths. Separate analog, digital, and I/O return currents where the board architecture allows, because 300 MHz operation and high-speed interface activity can expose even modest grounding errors.
Preserve the manufacturer's recommended BGA via and fanout geometry so assembly yield and electrical performance are not compromised. Check escape-routing length and reference-plane continuity for every high-speed interface, and avoid vias in critical signal paths where unnecessary. Component placement should preserve access for inspection and rework while preventing tall neighboring parts from interfering with the microcontroller's thermal and electrical performance.
Do not treat the ATSAMV71N19B-CB as an automatic functional replacement simply because both devices use a 100-TFBGA package. Its 512 KB flash is only one quarter of the target's 2 MB capacity. Review the linked firmware image, boot configuration, peripheral set, operating limits, and qualification before substitution, and retain sufficient flash margin for diagnostics, future revisions, and security-related updates.
Thông tin tuân thủ
The device is identified as an automotive SAM V71 microcontroller with AEC-Q100 classification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for this exact MPN.