Microchip Technology

ATSAMV71N21B-CB - 300MHz Cortex-M7 MCU | Microchip

料号: ATSAMV71N21B-CB ✓ 量产中
100-TFBGA (9 x 9 mm) Package 300 MHz Speed 2 MB (2M x 8 bits) Memory
最小起订量: 1 |

ATSAMV71N21B-CB 概述

The Microchip ATSAMV71N21B-CB is an automotive 32-bit ARM Cortex-M7 flash microcontroller operating up to 300 MHz, with 2 MB of flash memory, a double-precision floating-point unit, and a 100-pin TFBGA package measuring 9 x 9 mm. It combines high-performance control processing with automotive-oriented features in the SAM V71 family.

An automotive flash microcontroller is a semiconductor device that executes embedded control software from nonvolatile program memory while integrating peripherals for communications, timing, data acquisition, and digital control. Within the product hierarchy, the ATSAMV71N21B-CB is an ARM Cortex-M7 microcontroller, a 32-bit embedded processor within the SAM V71 automotive MCU family and the broader microcontrollers category.

The principal device attributes are a 300 MHz maximum operating frequency, 2 MB of flash memory, a Cortex-M7 core with double-precision FPU, and a 100-TFBGA package. These specifications suit applications requiring substantial control-loop calculation, connected equipment, graphical or communications support, and deterministic real-time behavior. The target is identified as an automotive-grade flash MCU, while the B suffix denotes the device configuration identified by Microchip.

The Cortex-M7 architecture supports efficient real-time execution, while the floating-point unit accelerates mathematical operations commonly found in motor control, signal processing, communications, and industrial automation. The 2 MB embedded flash provides room for application code, configuration data, and boot routines. The 100-TFBGA package also supports high-density PCB integration, although its fine ball pitch requires careful component placement and board-layout planning.

Typical applications include industrial automation, networked control equipment, motor-control systems, communications gateways, and embedded human-machine-interface controllers. The high clock rate and floating-point capability benefit applications that combine peripheral handling with computationally intensive control tasks. Automotive qualification requirements should also be checked against the complete system design rather than assumed from the family description alone.

PCB implementation requires attention to high-speed signal integrity, clean power and ground distribution, and thermal performance at the 9 x 9 mm TFBGA. Decoupling capacitors should be placed directly beside the relevant supply pins, and routing should minimize loops through supply-return paths. Firmware development is supported by the Microchip MPLAB X environment identified for the ATSAMV71N21B and ATSAMV71N21B families.

This product page consolidates the manufacturer family description, package details, sourcing information, verified drop-in alternatives, application guidance, and design considerations. It also distinguishes confirmed package-compatible options from comparison candidates that would require a different footprint or an engineering review before substitution.

直接替换替代料: ATSAMV71N21B-CB ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

ATSAMV71N19B-CB

✅ 直接替换
📦 100-TFBGA (9 x 9 mm)
Flash memory is 512 KB versus 2 MB, a 75% reduction, while the 100-TFBGA package is retained

📋 参考替代料(不在目录中)

ATSAMV71N21B-CB 最大额定值与电气特性

Product Type Automotive Flash Microcontroller
Processor Core ARM Cortex-M7
Architecture 32-bit
Maximum CPU Frequency 300 MHz
Floating-Point Unit Double Precision FPU
Flash Memory 2 MB (2M x 8 bits)
封装 100-TFBGA (9 x 9 mm)
Core Count 1
Product Family SAM V71
存储器类型 Flash
Device Variant ATSAMV71N21B
Development Environment MPLAB X IDE
Programming Language Support C and C++ via MPLAB XC32 compilers
安装类型 Surface Mount
Automotive Qualification AEC-Q100 automotive family

ATSAMV71N21B-CB 100-tfbga (9 x 9 mm) 引脚配置指南

ATSAMV71N21B-CB(100-tfbga (9 x 9 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

ATSAMV71N21B-CB 的 100-tfbga (9 x 9 mm) 封装引脚图

暂无详细引脚数据: ATSAMV71N21B-CB.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ATSAMV71N21B-CB 适用于 6 应用s: Industrial Automation Controller, Motor Control System, Industrial Communications Gateway, Connected Automotive Control Unit, Embedded Data Acquisition System, Embedded Human-Machine Interface.

🏭

Industrial Automation Controller

The ATSAMV71N21B-CB fits industrial automation controllers that must coordinate sensors, actuators, communications, and real-time control tasks in one device. Its 300 MHz ARM Cortex-M7 core provides computational headroom, while the double-precision FPU accelerates control calculations that benefit from floating-point arithmetic. The 2 MB flash capacity provides substantially more embedded program space than the 512 KB ATSAMV71N19B-CB comparison part, supporting larger protocols, diagnostics, and application layers. In a controller design, the MCU would supervise acquisition and actuation loops while handling network traffic and local safety monitoring.

🔧

Motor Control System

The ATSAMV71N21B-CB is suitable for sophisticated motor-control platforms requiring rapid sampling, deterministic computation, and substantial firmware capability. The Cortex-M7 core operates at up to 300 MHz, and its double-precision FPU supports transforms, filters, and control calculations commonly used in field-oriented motor algorithms. With 2 MB of flash, firmware can combine control routines, parameter management, communications, and fault logging. Compared with the 512 KB ATSAMV71N19B-CB, the target offers 1.5 MB more flash, which can reduce the need for external program-memory expansion.

🌐

Industrial Communications Gateway

The ATSAMV71N21B-CB can serve as the control processor in an industrial communications gateway that must manage multiple data paths and local real-time functions. Its 300 MHz Cortex-M7 performance supports protocol processing alongside background application logic, and the 2 MB flash stores firmware, network parameters, certificates or identifiers, and diagnostic data without requiring a separate external flash device. The 100-TFBGA package supports compact board integration, although fine-pitch assembly and signal-integrity work are essential when combining high-speed communication routing with dense power distribution.

🚗

Connected Automotive Control Unit

The ATSAMV71N21B-CB fits a connected automotive control unit that combines real-time processing with communications and diagnostics. Its automotive SAM V71 positioning provides a platform for applications that value the 300 MHz Cortex-M7 core, double-precision floating-point capability, and 2 MB of embedded flash. The available flash can accommodate layered firmware, communication stacks, secure data, and event logging while the controller coordinates vehicle-side networks. Engineering validation should confirm the exact ordering variant, temperature range, qualification status, and safety requirements before production release.

📡

Embedded Data Acquisition System

The ATSAMV71N21B-CB is appropriate for a high-speed embedded data-acquisition system where filtering, calibration, buffering, and control must coexist. The 300 MHz ARM Cortex-M7 processor provides capacity for computationally intensive signal routines, and the double-precision FPU improves the efficiency of filtering and mathematical transforms. Its 2 MB flash gives firmware designers considerably more room than the 512 KB ATSAMV71N19B-CB for acquisition software, configuration data, and calibration tables. The 100-TFBGA package also allows the controller to sit close to analog and interface circuitry on a compact instrument board.

📺

Embedded Human-Machine Interface

The ATSAMV71N21B-CB can support an embedded human-machine interface that coordinates display updates, input handling, communications, and application control. Its 300 MHz Cortex-M7 core provides sufficient performance for responsive graphical or touch-oriented control logic, while the double-precision FPU assists with scaling and signal-processing tasks. The 2 MB of flash allows room for interface firmware, assets, protocol code, and configuration data, giving designers more capacity than the ATSAMV71N19B-CB. A 100-TFBGA implementation requires careful escape routing and component placement around the display connector and touch interface.

推荐产品汇总

ATSAMV71N19B-CB Lower-memory package-compatible family alternative 用于: Industrial Automation Controller, Motor Control System, Industrial Communications Gateway, Connected Automotive Control Unit, Embedded Data Acquisition System, Embedded Human-Machine Interface ATSAMV71N21B Base device in the same SAM V71 product family 用于: Industrial Automation Controller, Industrial Communications Gateway, Connected Automotive Control Unit, Embedded Human-Machine Interface ATSAMV71N21B-CBT Tape-and-reel ordering variant of the device family 用于: Motor Control System, Embedded Data Acquisition System
What is the ATSAMV71N21B-CB?
The ATSAMV71N21B-CB is a Microchip automotive flash microcontroller built around a 32-bit ARM Cortex-M7 processor. According to the Microchip product-page description, it operates at up to 300 MHz, includes a double-precision floating-point unit, and provides 2 MB of flash memory. The device is supplied in a 100-pin TFBGA package measuring 9 x 9 mm, making it suitable for compact automotive, industrial, and embedded-control systems.
What is the operating frequency of ATSAMV71N21B-CB?
The ATSAMV71N21B-CB operates at up to 300 MHz. This maximum clock rate is identified in Microchip's description of the SAM V71 family and in the distributor listing for the device. The high operating frequency supports responsive real-time control, communication protocol handling, and floating-point workloads, although actual application performance also depends on memory configuration, peripheral clock settings, firmware, and thermal conditions.
How much flash memory does ATSAMV71N21B-CB have?
The ATSAMV71N21B-CB contains 2 MB of embedded flash, organized as 2M x 8 bits. This figure appears in the Microchip product-page snippet and the DigiKey product description. The on-chip nonvolatile memory can hold the boot code, operating system, application firmware, configuration data, and logging structures required by a complex embedded controller.
What package does ATSAMV71N21B-CB use?
The ATSAMV71N21B-CB uses a 100-TFBGA package with dimensions of 9 x 9 mm. The distributor specification identifies it as a 100-pin TFBGA, and the Microchip family listing confirms the 2 MB configuration. Use the manufacturer pin-description table and land pattern when assigning tracks and thermal design because a 100-ball BGA requires exact pad, escape-routing, and reflow-profile alignment.
Where can I find the ATSAMV71N21B-CB datasheet and pinout?
The ATSAMV71N21B-CB datasheet and technical product information can be found through the official Microchip ATSAMV71N21B product page at https://www.microchip.com/en-us/product/ATSAMV71N21B. For board design, use the pin-description table, package drawing, and recommended land pattern in the manufacturer documentation to assign every ball. Do not infer BGA connectivity from a generic BGA layout.
What can replace the ATSAMV71N21B-CB?
The closest confirmed same-package option is the ATSAMV71N19B-CB, which uses the same 100-TFBGA form factor but provides 512 KB of flash rather than the target's 2 MB. It is therefore a constrained replacement only when code size and other device-specific requirements fit. No cross-brand drop-in replacement was established by the available compatibility information, so firmware, memory, peripherals, and qualification must be reviewed before substitution.
Can ATSAMV71N19B-CB replace ATSAMV71N21B-CB?
The ATSAMV71N19B-CB can serve as a package-compatible fallback in some constrained designs because it is identified with the same 100-TFBGA package. Its 512 KB flash capacity is 75% lower than the ATSAMV71N21B-CB's 2 MB, however, and other device characteristics must also be checked. It should not replace the target without confirming application code size, memory requirements, peripheral configuration, and qualification.
Is the ATSAMV71N21B-CB suitable for automotive control applications?
The ATSAMV71N21B-CB belongs to Microchip's automotive SAM V71 flash-microcontroller family and is identified as an automotive-grade part in the comparison information. Its 300 MHz Cortex-M7 core, double-precision FPU, and 2 MB of flash are appropriate for connected control, signal processing, and motor-control workloads. Confirm the exact temperature grade, automotive qualification status, and production requirements against the ordering information for the complete design.
ATSAMV71N21B-CB vs ATSAMV71N19B-CB: which is better?
The ATSAMV71N21B-CB is the better choice when application code requires its 2 MB of flash, while the ATSAMV71N19B-CB is the more constrained option with 512 KB. Both are identified in the same 100-TFBGA package family and use the same ARM Cortex-M7 platform. Choose based principally on memory capacity, then verify peripheral configuration, qualification, temperature range, and software compatibility.
When should I choose the ATSAMV71N21B-CB instead of a lower-memory variant?
Choose the ATSAMV71N21B-CB when firmware size, diagnostics, configuration tables, or embedded logging could exceed the 512 KB available in the ATSAMV71N19B-CB. Its 2 MB of flash provides four times as much program memory. Select the lower-memory variant only after measuring the linked image and leaving margin for future code growth, bootloaders, updates, and application data.
Is ATSAMV71N21B-CB compatible with a cross-brand ARM Cortex-M7 MCU?
No cross-brand drop-in compatibility was established for the ATSAMV71N21B-CB. A cross-brand MCU would require a verified 100-TFBGA land pattern, compatible ball assignments, equivalent power and clock architecture, matching peripherals, usable development-tool support, and appropriate qualification. Similar processor speed or memory alone does not make another manufacturer's MCU a drop-in replacement.
How do I design the power and ground layout for ATSAMV71N21B-CB?
Route each supply input through a dedicated low-impedance plane connection and place the required decoupling capacitors immediately beside their associated power balls. Keep power and ground return paths short, use a continuous ground reference for high-speed signals, and follow the manufacturer's recommended layout and stack-up guidelines. Poor BGA power distribution can produce clock instability, signal-integrity problems, and unintended current in the Cortex-M7 core and peripherals.
Does the ATSAMV71N21B-CB require special PCB layout for its 100-TFBGA package?
The ATSAMV71N21B-CB requires layout designed specifically for its 100-TFBGA footprint. The 9 x 9 mm body and fine ball pitch demand appropriate escape routing, via patterns, solder-mask design, and component-placement clearance. Use the manufacturer package drawing and recommended land pattern rather than a generic 100-BGA library, and verify footprint compatibility with an independent PCB review before fabrication.
What software supports the ATSAMV71N21B-CB?
Microchip identifies MPLAB X IDE as the configurable software platform for developing and debugging ATSAMV71N21B and ATSAMV71N21B designs. The tool environment supports source editing, breakpoint placement, single-step execution, and inspection of variables and data structures. The C and C++ toolchain availability depends on the installed MPLAB XC32 compiler components and the specific device support package.
Where can I buy ATSAMV71N21B-CB and what is the lead time?
Use the Request a Quote form on this page to request ATSAMV71N21B-CB pricing, stock confirmation, minimum order quantity, and current lead time. The manufacturer and distributor pages confirm that the part is marketed, but current transaction terms can vary with package suffix, quantity, and production schedule. Request the exact MPN ATSAMV71N21B-CB when obtaining a quotation so the response covers the intended configuration.

工程参考数据: ATSAMV71N21B-CB ——对比、设计指导和合规信息。

选型指南

Choose the ATSAMV71N21B-CB when an embedded design needs the full 2 MB of embedded flash, a 300 MHz ARM Cortex-M7 core, a double-precision FPU, and a compact 100-TFBGA package. It is particularly appropriate for industrial controllers, communications equipment, data-acquisition systems, motor-control platforms, and connected automotive products that need meaningful firmware growth beyond a minimal control application. The ATSAMV71N19B-CB is the closest confirmed package-compatible fallback, but its 512 KB flash is 75% lower and can impose restrictions on code size, diagnostics, logging, and future updates. No cross-brand drop-in option was established, so a different manufacturer's Cortex-M7 device should not be assumed to fit the 100-TFBGA land pattern or preserve peripheral and software compatibility. Final selection should also confirm temperature grade, automotive qualification, operating voltage, peripheral configuration, tool support, and lifecycle requirements.

与替代料对比

参数 本产品 ATSAMV71N19B-CB
Package 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm)
Brand Microchip Technology Microchip Technology
Processor Core ARM Cortex-M7 ARM Cortex-M7
Maximum CPU Frequency 300 MHz 300 MHz
Flash Memory 2 MB 512 KB
Floating-Point Unit Double Precision FPU Double Precision FPU
Architecture 32-bit 32-bit
Core Count 1 1
Product Family SAM V71 SAM V71
Development Environment MPLAB X IDE MPLAB X IDE

关键差异点

  • Four times the flash capacity of the package-compatible lower-memory variant (对比 ATSAMV71N19B-CB)
  • Retains the high-performance Cortex-M7 computing platform (对比 ATSAMV71N19B-CB)
  • Maintains the same 100-TFBGA board footprint class (对比 ATSAMV71N19B-CB)

设计说明

Design the board around the exact 100-TFBGA land pattern rather than a generic 100-BGA footprint. Verify ball assignments, ball-pitch geometry, solder-mask clearance, via dimensions, and component-placement rules against the Microchip package drawing. Because the package is only 9 x 9 mm, escape routing can become congested when the design combines high-speed interfaces, multiple supply domains, and dense external memory.

Place every required decoupling capacitor directly between the relevant power ball and its associated ground reference. Keep supply and ground connections short, use wide traces or planes where space permits, and avoid placing noisy switching loops beneath sensitive signal paths. Separate analog, digital, and I/O return currents where the board architecture allows, because 300 MHz operation and high-speed interface activity can expose even modest grounding errors.

Preserve the manufacturer's recommended BGA via and fanout geometry so assembly yield and electrical performance are not compromised. Check escape-routing length and reference-plane continuity for every high-speed interface, and avoid vias in critical signal paths where unnecessary. Component placement should preserve access for inspection and rework while preventing tall neighboring parts from interfering with the microcontroller's thermal and electrical performance.

Do not treat the ATSAMV71N19B-CB as an automatic functional replacement simply because both devices use a 100-TFBGA package. Its 512 KB flash is only one quarter of the target's 2 MB capacity. Review the linked firmware image, boot configuration, peripheral set, operating limits, and qualification before substitution, and retain sufficient flash margin for diagnostics, future revisions, and security-related updates.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The device is identified as an automotive SAM V71 microcontroller with AEC-Q100 classification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for this exact MPN.

相关搜索

ATSAMV71N21B-CB datasheet ATSAMV71N21B-CB pinout ATSAMV71N21B-CB specifications ATSAMV71N21B-CB price ATSAMV71N21B-CB stock ATSAMV71N21B-CB replacement ATSAMV71N21B-CB equivalent ATSAMV71N21B-CB vs ATSAMV71N19B-CB ATSAMV71N21B-CB footprint Microchip ATSAMV71N21B-CB ATSAMV71N21B-CB 100-TFBGA ATSAMV71N21B-CB 300MHz ATSAMV71N21B-CB automotive MCU ATSAMV71N21B-CB MPLAB X ATSAMV71N21B-CB cross reference

相关元器件 & 术语

Microchip Technology ATSAMV71N21B-CB ATSAMV71N19B-CB ATSAMV71N21B ATSAMV71N21B-CBT ARM Cortex-M7 32-bit microcontroller automotive flash microcontroller SAM V71 embedded microcontroller semiconductor double-precision FPU 300 MHz 2 MB flash memory 100-TFBGA TFBGA package BGA package surface mount AEC-Q100 MPLAB X IDE MPLAB XC32 real-time control industrial automation motor control automotive electronics
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情