Microchip Technology

ATTINY12L-4SU - 4MHz 8-Bit AVR MCU | Microchip Technology

MPN: ATTINY12L-4SU ✓ Hoạt động
3.3 V to 5 V Vdss 8-pin SOIC Package 4 MHz Speed 1 KB (512 x 16 bits) Memory
MOQ: 1 |

ATTINY12L-4SU Tóm tắt

The Microchip Technology ATTINY12L-4SU is an 8-bit AVR RISC microcontroller with a 4 MHz clock, 1 KB of Flash program memory, 64 bytes of EEPROM, and a 3.3 V to 5 V supply range, housed in an 8-pin SOIC package. Its compact architecture supports basic control, timing, signal-processing, and low-power embedded functions.

An 8-bit microcontroller is a compact embedded processor designed to execute control logic, measure inputs, manage outputs, and maintain system state. The ATtiny family belongs to the AVR product line, where the reduced-instruction-set controller combines nonvolatile program storage, digital I/O, timers, and power-management functions in one integrated circuit. The ATTINY12L is positioned at the entry level of this hierarchy and is suited to applications that do not require a large working memory or extensive peripheral set.

The ATTINY12L-4SU combines 1 KB of Flash memory organized as 512 words by 16 bits, 64 bytes of EEPROM, and eight general-purpose working registers. Its four principal features include 4 MHz operation, single-clock-cycle execution for most instructions, fully static operation, and nonvolatile program memory. The -4 suffix identifies the 4 MHz speed grade, while the U suffix identifies the surface-mount SOIC shipping configuration.

The AVR RISC architecture provides compact, efficient execution for control-oriented firmware. Because most instructions complete in one clock cycle, the processor can combine meaningful computational activity with low system power consumption. Nonvolatile Flash retains the programmed application after power removal, while EEPROM supports nonvolatile parameter or configuration storage without consuming the limited program-memory budget.

Typical uses include simple motor or actuator controllers, compact sensor interfaces, LED status and indicator systems, low-cost measurement products, household appliance controls, and small industrial control modules. The device is especially appropriate when the control task fits within 1 KB of Flash and does not require the memory, pin count, or peripheral set of a larger 8-bit or 32-bit MCU.

Circuit design should preserve the supply-voltage limits, provide adequate decoupling at the power pins, and assign every external signal to the pin defined in the manufacturer pin-description table. Designers should also confirm startup behavior, clock configuration, reset requirements, and I/O limits in the manufacturer datasheet before releasing a production PCB.

This page combines the key electrical characteristics, practical design guidance, application fit, and drop-in replacement analysis needed to evaluate the ATTINY12L-4SU as an 8-pin, 4 MHz AVR control solution.

Bộ thay thế dễ dàng lắp đặt cho ATTINY12L-4SU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATTINY12L-4SU (cùng hình factor và footprint) — khác nhau ở Architecture, Flash Memory, Instruction Set, Mounting Type.

Microchip Technology
Architecture: AVR RISC architecture
Flash Memory: 1 KB (512 x 16)
Instruction Set: 90 powerful instructions
So sánh với ATTINY12L-4SU →

ATTINY12L-4SI

✅ Drop-In
📦 8-pin SOIC
Same 4 MHz ATtiny12L family, 1 KB Flash, 64-byte EEPROM, and 8-pin SOIC electrical configuration; ordering suffix differs by 0% in listed key parameters

📋 Tham chiếu thay thế (không có trong danh mục)

ATTINY12L-4SC

✅ Drop-In
📦 8-pin SOIC
Same 4 MHz ATtiny12L family, 1 KB Flash, 64-byte EEPROM, and 8-pin SOIC electrical configuration; ordering suffix differs by 0% in listed key parameters

📋 Tham chiếu thay thế (không có trong danh mục)

ATTINY12L-4SU Tỷ lệ tối đa & tính chất điện

Microcontroller Type 8-bit AVR RISC microcontroller
Architecture AVR enhanced RISC
Tần số xung maksimum 4 MHz
Flash Memory 1 KB (512 x 16 bits)
EEPROM Memory 64 bytes
General-Purpose Working Registers 8 registers
Điện áp cung cấp 3.3 V to 5 V
Instruction Set 90 instructions
Instruction Execution Most instructions in one clock cycle
Program Memory Type Nonvolatile Flash
Data Memory Type Nonvolatile EEPROM
Operating Mode Fully static operation
General-Purpose I/O 6 I/O pins
Hộp 8-pin SOIC
Kiểu lắp đặt Surface mount
Temperature Grade Industrial temperature
Lead-Free Status Green

Hướng dẫn cấu hình chân ATTINY12L-4SU 8-pin soic

Cấu hình chân cho ATTINY12L-4SU (8-pin soic gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 8-pin soic cho ATTINY12L-4SU

Không có dữ liệu chân cụ thể sẵn có cho ATTINY12L-4SU.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ATTINY12L-4SU phù hợp cho 6 Áp dụngs: Compact Sensor Interface, LED Indicator Controller, Simple Actuator Control, Battery-Powered Remote Control, Household Appliance Control, Digital Panel Controller.

🧩

Compact Sensor Interface

The ATTINY12L-4SU fits small sensor interfaces because it combines a 4 MHz AVR core, six I/O pins, 1 KB of Flash, and 64 bytes of EEPROM in an 8-pin SOIC. It can read discrete sensors, apply thresholds, debounce inputs, and drive indicators without a separate logic device. Its 3.3 V to 5 V operating range supports both 3.3 V and 5 V mixed-signal systems. The main design consideration is capacity: with only 1 KB of program memory, the firmware should be concise, and analog conditioning or high-rate conversion should remain outside the MCU.

💡

LED Indicator Controller

The ATTINY12L-4SU is effective for an LED status or warning controller because six I/O pins can operate several indicators and sense a small number of control inputs. Its 4 MHz execution rate provides more than enough throughput for periodic blinking, sequencing, and state-machine logic, while nonvolatile Flash retains the lighting pattern after power loss. The 8-pin SOIC package also simplifies compact panel layouts. Designers should use current-limiting resistors, confirm the total output-drive limits for each pin, and avoid driving loads directly beyond the electrical limits stated in the manufacturer datasheet.

🏭

Simple Actuator Control

The ATTINY12L-4SU can coordinate a small actuator, relay, or valve when the control sequence fits within 1 KB of Flash and the interface requires only a few digital signals. Its fully static AVR operation and mostly single-cycle instruction execution support efficient event-based firmware. The controller can debounce commands, impose timing, update an output state, and preserve configuration in EEPROM. Use an appropriate driver interface for inductive loads, maintain isolation from supply transients, and keep external switching hardware outside the MCU footprint.

📱

Battery-Powered Remote Control

The ATTINY12L-4SU fits simple battery-powered remote controls that use a few buttons, a small indicator, and a low-rate communication or pulse sequence. Its 3.3 V operation supports compatible low-energy systems, while the 4 MHz AVR core provides ample instruction throughput for debouncing and compact protocol handling. The device can remain static during idle periods to reduce consumption. Actual battery performance depends on the selected sleep mode, pull-up resistors, transmitter characteristics, and duty cycle, so measure the complete board rather than relying on core clock speed alone.

🔧

Household Appliance Control

The ATTINY12L-4SU is appropriate for a small household appliance controller that coordinates switches, timers, indicators, and a limited sensor set. The 8-pin SOIC package supports automated assembly, while 1 KB of Flash and 64 bytes of EEPROM are adequate for deterministic state-machine firmware. Its industrial-temperature ordering grade is relevant to equipment operating across varied ambient conditions. Designers should add appropriate input protection, confirm available I/O after power and programming requirements are allocated, and validate timing behavior across the complete appliance power cycle.

📺

Digital Panel Controller

The ATTINY12L-4SU can serve as a digital panel controller for a compact keypad, status display, or set of relay outputs. Its 4 MHz AVR core handles button scanning and menu-state transitions, while 64 bytes of EEPROM can retain a small number of user settings. The 8-pin SOIC format is well suited to panel PCBs where component area is restricted. For displays or communication interfaces requiring more pins, protocol storage, or simultaneous tasks, move to a larger controller such as ATMEGA48PA-MN; otherwise, keep the firmware modular and budget the 1 KB Flash carefully.

What are the key specifications of ATTINY12L-4SU that engineers should know?
The ATTINY12L-4SU is an 8-bit AVR RISC microcontroller operating at up to 4 MHz with 1 KB of Flash, 64 bytes of EEPROM, 3.3 V to 5 V operation, and an 8-pin SOIC package. According to the Atmel manufacturer datasheet, it includes eight general-purpose working registers, 90 instructions, fully static operation, and mostly single-clock-cycle instruction execution. These characteristics make it suitable for compact control tasks where program memory and package size are more important than processing capacity.
What is the operating voltage of ATTINY12L-4SU?
The ATTINY12L-4SU operates from 3.3 V to 5 V according to the Atmel manufacturer datasheet and product listings. The supply range allows operation in both 3.3 V and 5 V systems, but the circuit must remain within the limits specified for the selected device version. Check the power, ground, reset, and I/O pin assignments against the manufacturer pin-description table before applying either supply level.
How much memory does ATTINY12L-4SU have?
The ATTINY12L-4SU provides 1 KB of nonvolatile Flash program memory, organized as 512 words by 16 bits, and 64 bytes of EEPROM. According to the Atmel manufacturer datasheet, it also contains eight general-purpose working registers. The small memory footprint is sufficient for compact control routines but requires careful code-size planning for functions such as protocol handling, math routines, or multi-state logic.
Where can I download the ATTINY12L-4SU datasheet PDF?
The ATTINY12L-4SU datasheet and technical documentation can be reached through the linked manufacturer-datasheet page, which also provides access to the device PDF and its pin, clock, memory, and electrical specifications. According to the Atmel manufacturer datasheet, the document is a 13-page PDF. Use its pin-description table to assign PCB nets and its electrical characteristics section to set decoupling and operating limits.
Where can I find the ATTINY12L-4SU pinout?
The ATTINY12L-4SU uses an 8-pin SOIC package, and its numbered pin assignments are defined in the pin-description table of the Atmel manufacturer datasheet. Use that table when assigning power, ground, reset, clock, programming, and I/O nets because this page does not reproduce the complete pin map. The surface-mount footprint and counter-clockwise numbering must match the SOIC-8 library drawing before fabrication.
Is ATTINY12L-4SU suitable for low-power embedded control?
The ATTINY12L-4SU is suitable for low-power embedded control because its AVR core supports fully static operation and most instructions execute in one clock cycle. According to the Atmel manufacturer datasheet, it operates from 3.3 V to 5 V and stores firmware in nonvolatile Flash. Actual battery life depends on the selected sleep mode, external pull-ups, sensor duty cycle, and whether the processor or I/O lines remain active.
ATTINY12L-4SU vs ATTINY12L-4SI: which is better for a new design?
The ATTINY12L-4SU is the preferred choice when the required footprint is the 8-pin SOIC shipping configuration associated with the U suffix. The ATTINY12L-4SI shares the 4 MHz ATtiny12L family and 1 KB Flash organization, but its suffix corresponds to a different shipping option. Confirm the manufacturer ordering table, tape orientation, and assembly requirements before treating either ordering code as interchangeable.
When should I choose ATTINY12L-4SU over a larger 8-bit AVR controller?
Choose the ATTINY12L-4SU when the application fits within 1 KB of Flash, 64 bytes of EEPROM, six I/O pins, and the functions provided by this entry-level AVR device. Its 4 MHz clock and 8-pin SOIC package simplify compact, cost-sensitive designs. Select a larger AVR controller when firmware growth, additional timers, more I/O, greater memory, or wider peripheral requirements would exceed the limits of this part.
Is ATTINY12L-4SU suitable for a small sensor interface?
The ATTINY12L-4SU can suit a small sensor interface when the interface requires limited I/O, modest processing, and nonvolatile configuration storage. Its six I/O pins and 64 bytes of EEPROM provide resources for discrete sensors, digital controls, and stored parameters, while the 4 MHz AVR core handles basic acquisition and response logic. Avoid it when the sensor requires high-rate conversion, extensive buffering, or a large data protocol stack.
What can replace ATTINY12L-4SU?
A direct replacement should retain the 8-pin SOIC footprint, pin assignment, 4 MHz speed grade, 1 KB Flash organization, 64-byte EEPROM, and 3.3 V to 5 V operating range. ATTINY12L-4SI and ATTINY12L-4SC are family candidates that require a final ordering-code and assembly check, but package similarity alone does not prove compatibility. Request a quote for the exact ATTINY12L-4SU and validate any proposed substitute against the manufacturer pin table.
Is ATTINY12L-4SU the same as ATTINY12L-4SC?
The ATTINY12L-4SU and ATTINY12L-4SC are closely related ATtiny12L devices, but an ordering suffix can indicate differences in shipping configuration, temperature treatment, or approved sourcing. Both are associated with 1 KB Flash, 64-byte EEPROM, 4 MHz operation, and an 8-pin SOIC class of package. Treat them as candidates rather than unconditional substitutes and verify the exact suffix, tape orientation, and manufacturer ordering information.
Where can I buy ATTINY12L-4SU online?
Use the Request a Quote form on this page to buy the ATTINY12L-4SU and request current availability, quantity breaks, and lead time for the exact 8-pin SOIC ordering code. The component is also shown in stock by a major distributor listing, but inventory changes continuously and does not establish future allocation. Include your target quantity, assembly packaging, delivery location, and required production dates in the request.
What is the price of ATTINY12L-4SU?
Use the Request a Quote form on this page for a current ATTINY12L-4SU price at your requested quantity. The quote process accounts for exact suffix, packaging, volume, currency, and delivery requirements without presenting a potentially stale catalog figure. Request separate quotation lines if your production plan includes prototype quantities, recurring builds, and factory-representative orders.
What is the lead time for ATTINY12L-4SU?
Submit the ATTINY12L-4SU request through the Request a Quote form on this page to obtain a current lead time and minimum-order quantity. Lead time can vary with the exact ordering suffix, reel or tray packaging, production volume, component availability, and quality requirements. Provide your schedule and forecast so the supplier can confirm the most relevant supply plan.
Is ATTINY12L-4SU in stock?
The ATTINY12L-4SU is advertised as in stock by a distributor, but stock is time-sensitive and may change without notice. Use the Request a Quote form on this page for current stock confirmation and quantity allocation. Include the required package, target quantity, delivery location, and date by which material must arrive so the quotation reflects an actionable supply commitment.
What is the best Microchip equivalent for ATTINY12L-4SU?
The closest Microchip family candidates identified for the ATTINY12L-4SU are the ATTINY12L-4SI and ATTINY12L-4SC, both associated with 4 MHz operation, 1 KB Flash, 64-byte EEPROM, and an 8-pin SOIC configuration. The final choice depends on ordering-code and assembly requirements. Verify the manufacturer ordering information, pin table, and tape orientation before approving either candidate as a drop-in replacement.

Dữ liệu tham khảo kỹ thuật cho ATTINY12L-4SU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ATTINY12L-4SU when a compact control design needs a 4 MHz 8-bit AVR core, 1 KB of Flash, 64 bytes of EEPROM, six I/O pins, and an 8-pin SOIC footprint. It is well matched to simple indicators, compact sensor interfaces, appliance state machines, and short embedded routines. Consider ATTINY12L-4SI when its ordering and assembly configuration better matches the planned supply channel; consider ATTINY12L-4SC after verifying its exact suffix, temperature treatment, and packaging requirements. Both identified alternatives appear electrically close to the target, but final approval must include confirmation of the manufacturer ordering table, pin assignments, and tape orientation. If the firmware exceeds 1 KB, more than six I/O pins are needed, or multiple timers and communication functions are required, move to a larger AVR controller such as ATMEGA48PA-MN rather than forcing additional functionality into this compact device.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ATTINY12L-4SI ATTINY12L-4SC
Brand Microchip Technology Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Architecture 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC
Maximum Clock Frequency 4 MHz 4 MHz 4 MHz
Flash Memory 1 KB (512 x 16 bits) 1 KB 1 KB
EEPROM Memory 64 bytes 64 bytes 64 bytes
Supply Voltage 3.3 V to 5 V 3.3 V 3.3 V to 5 V
General-Purpose I/O 6 I/O pins 6 I/O pins 6 I/O pins
Temperature Grade Industrial temperature Industrial temperature Industrial temperature

Bảo phân biệt quan trọng

  • Compact 8-bit AVR solution with nonvolatile configuration storage (vsATTINY12L-4SI)
  • Entry-level 4 MHz control in an 8-pin SOIC package (vsATTINY12L-4SC)
  • Higher execution throughput than a conventional MCU instruction cycle approach (vsATTINY12L-4SC)

Ghi chú thiết kế

Place the supply bypass capacitor close to the device power pin and connect the ground return directly to the corresponding ground plane or ground pin. Keep sensitive analog or communication paths away from the switching return current. The ATTINY12L-4SU supports a 3.3 V to 5 V range, but the external circuit must not allow supply transients, ground bounce, or I/O injection to push a pin outside its specified limits.

Use the manufacturer pin-description table to assign power, programming, reset, and I/O functions before routing the PCB. Preserve the 8-pin SOIC footprint, pin-1 orientation, and standard counter-clockwise numbering. Leave programming access unobstructed where possible, route the reset network close to the device, and keep high-current or switching nodes away from the compact signal area surrounding this 8-pin controller.

Do not underestimate the 1 KB Flash limit. Include library code, interrupt vectors, initialization routines, and application logic in the memory budget rather than checking only the main routine. The 64-byte EEPROM is also limited, so avoid using it as general RAM. If firmware growth or pin demand makes either resource inadequate, select a larger AVR controller before PCB release.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The component is described as a green, industrial-temperature part. RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer's current compliance documentation.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

attiny12l datasheet ATTINY12L-4SU datasheet ATTINY12L-4SU datasheet pdf ATTINY12L-4SU pinout ATTINY12L-4SU specifications ATTINY12L-4SU 8-SOIC ATTINY12L-4SU 4MHz 1KB flash ATTINY12L-4SU equivalent ATTINY12L-4SU replacement ATTINY12L-4SU vs ATTINY12L-4SI ATTINY12L-4SU application circuit ATTINY12L-4SU price ATTINY12L-4SU stock

Các bộ phận và thuật ngữ liên quan

Microchip Technology Atmel ATTINY12L-4SU ATTINY12L-4SI ATTINY12L-4SC ATtiny12L 8-bit microcontroller AVR RISC architecture AVR enhanced RISC microcontroller embedded processor semiconductor Flash memory EEPROM nonvolatile memory 4 MHz clock 3.3 V to 5 V power supply 8-pin SOIC SOIC package family surface-mount package SMD fully static operation single-clock-cycle execution low-power embedded control RoHS
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ