Microchip Technology

ATTINY44A-MMH - 20MHz 8-bit AVR MCU | Microchip

MPN: ATTINY44A-MMH ✓ Hoạt động
1.8 V Vdss 20-VQFN (3 x 3 mm) Package 20 MHz Speed 4 KB Memory
MOQ: 1 |

ATTINY44A-MMH Tóm tắt

The Microchip ATTINY44A-MMH is a 20 MHz, 8-bit AVR RISC microcontroller with 4 KB of in-system programmable flash, 256 bytes of EEPROM, 256 bytes of SRAM, and 12 general-purpose I/O lines in a 20-VQFN 3 x 3 mm package. It combines 32 general-purpose working registers with an 8-bit timer/counter providing two PWM channels, making it suitable for compact embedded-control, sensing, actuator-control, and low-cost automation designs.

A microcontroller is an integrated semiconductor that executes firmware, reads inputs, controls outputs, and manages timing within a complete embedded system. The ATtiny44A belongs to the TinyAVR family and uses an 8-bit AVR enhanced RISC architecture. Its relatively small memory footprint and I/O count suit compact products where the application does not require the storage, processing capacity, or pin count of a larger microcontroller.

Key features include 20 MHz maximum operating frequency, 4 KB of programmable flash, 256 bytes each of EEPROM and SRAM, 12 general-purpose I/O lines, 32 working registers, and two hardware PWM channels. The 20-VQFN package reduces board footprint for space-constrained designs, while in-system programming supports programming and updating through the device programming interface. The industrial-temperature ordering option is identified in product listings for this exact MPN.

The ATtiny44A architecture executes AVR instructions efficiently and supports a broad range of embedded-control tasks. Flash memory holds firmware, SRAM supports working variables and stack operations, and EEPROM provides nonvolatile storage for parameters or calibration data. The two PWM outputs can support motor, LED-brightness, or proportional control functions when the firmware and external power-stage requirements are appropriate.

Typical uses include industrial control modules, compact sensor interfaces, LED lighting controllers, small motor controllers, appliance controls, and low-power embedded products. In each case, the 12 I/O lines, two PWM channels, and 4 KB program space provide a practical resource envelope for coordinated sensing and actuator management without introducing a larger processor or discrete timing circuitry.

PCB design should preserve short, clean power and ground connections, place decoupling capacitors close to the supply pins, and route programming and communications away from sensitive analog inputs. The compact 3 x 3 mm VQFN package also requires careful attention to pad geometry, solder-paste design, thermal-pad assembly, and inspection because short lead spacing makes assembly quality important.

This product overview combines the exact orderable MPN, package, memory, clock, and I/O characteristics with practical design guidance and qualified replacement analysis. It helps engineers identify whether the ATTINY44A has enough resources for an embedded-control design before committing to a compact 20-VQFN PCB layout.

Bộ thay thế dễ dàng lắp đặt cho ATTINY44A-MMH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATTINY44A-MMH (cùng hình factor và footprint) — khác nhau ở Architecture, General-Purpose I/O Lines, General-Purpose Working Registers, PWM Channels, Package.

Microchip Technology
Architecture: Advanced RISC
General-Purpose I/O Lines: 12 lines
General-Purpose Working Registers: 32 registers
So sánh với ATTINY44A-MMH →

ATTINY84A-MMH

✅ Drop-In
📦 20-VQFN (3 x 3 mm)
Flash increases from 4 KB to 8 KB, a 100% increase, while the 20-VQFN 3 x 3 mm package is retained; pin multiplexing and firmware assumptions require verification.

📋 Tham chiếu thay thế (không có trong danh mục)

ATTINY24A-MMH

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 20-VQFN (3 x 3 mm)
Uses the same 20-VQFN 3 x 3 mm package class but has lower memory resources than the 4 KB-flash ATTINY44A; firmware, SRAM, EEPROM, and peripheral checks are required.

📋 Tham chiếu thay thế (không có trong danh mục)

ATTINY441-MMH

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 20-VQFN (3 x 3 mm)
Retains the 20 MHz-class 4 KB-flash architecture and 20-VQFN 3 x 3 mm package, but uses the ATtiny441 peripheral set; pin multiplexing and software compatibility require verification.

📋 Tham chiếu thay thế (không có trong danh mục)

ATTINY44A-MMH Tỷ lệ tối đa & tính chất điện

Product Type 8-bit RISC microcontroller
Architecture AVR enhanced RISC
Tần số xung maksimum 20 MHz
Program Flash Memory 4 KB
Program Word Organization 2K x 16
EEPROM Memory 256 bytes
SRAM Memory 256 bytes
General-Purpose I/O Lines 12
General-Purpose Working Registers 32
Timer/Counter 8-bit timer/counter
PWM Channels 2
Điện áp cung cấp hoạt động 1.8 V
Temperature Grade Industrial temperature
Hộp 20-VQFN (3 x 3 mm)
Package Type QFN
Termination Material NiPdAu
Green Classification Green
Programming In-system programmable

Hướng dẫn cấu hình chân ATTINY44A-MMH qfn

Cấu hình chân cho ATTINY44A-MMH (qfn gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân qfn cho ATTINY44A-MMH

Không có dữ liệu chân cụ thể sẵn có cho ATTINY44A-MMH.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ATTINY44A-MMH phù hợp cho 6 Áp dụngs: Industrial Sensor Interface, LED Lighting Controller, Small Motor Controller, Appliance Control Module, Portable Measurement Product, Security and Access Control.

🏭

Industrial Sensor Interface

The ATTINY44A-MMH fits compact sensor-interface modules that need to acquire measurements, apply calibration, and present processed data through a serial or digital interface. Its 12 general-purpose I/O lines provide connections for sensors, indicators, and control signals without requiring a large microcontroller. The 256 bytes of SRAM support short working buffers, while 256 bytes of EEPROM can retain configuration or calibration values across power cycles. At a 20 MHz maximum clock, the AVR core provides more than enough throughput for typical polling, filtering, thresholding, and communication routines. Designers should keep analog traces away from clock and programming nets, use local decoupling, and reserve firmware space for calibration logic and fault handling.

💡

LED Lighting Controller

The ATTINY44A-MMH is appropriate for compact multi-channel LED controllers where dimming, sequencing, and status indication must be coordinated in a small enclosure. Its two hardware PWM channels can generate independent base-frequency duty cycles for two lighting channels, while the remaining I/O lines can control enable signals, drivers, or indicators. The 4 KB of flash is suitable for a focused lighting state machine rather than a large graphical application. Keeping PWM functions on timer-capable pins simplifies deterministic dimming and reduces firmware jitter. The design should verify LED-driver topology, current limits, thermal performance, and whether an external transistor or constant-current driver is required.

🔧

Small Motor Controller

The ATTINY44A-MMH can manage a small DC motor or solenoid in compact power-control products. Its two PWM outputs support speed or proportional-control functions, while the 12 I/O lines can accept limit sensors, command inputs, and fault signals. The 20 MHz AVR clock provides useful response margin for closed-loop routines such as edge counting, duty-cycle adjustment, and current limiting. Because the MCU does not directly replace a power MOSFET, relay, or motor driver, the external switching stage must be sized separately. Validate stall current, inductive voltage transients, thermal rise, and startup behavior before connecting the controller to a load.

⚡

Appliance Control Module

The ATTINY44A-MMH is well suited to appliance and household-product control modules that coordinate buttons, indicators, relays, and small motors. Four kilobytes of flash can hold focused control firmware, 256 bytes of SRAM can support state variables, and the 12 I/O lines offer enough connectivity for a keypad, status LEDs, and discrete actuators. The 3 x 3 mm VQFN package helps reduce board area where enclosure space is restricted. For safety-related appliance functions, add appropriate fail-safe behavior, input filtering, and electrical isolation where required. Firmware should avoid relying on timing delays alone and should use debounce, watchdog, and diagnostic strategies appropriate to the appliance load.

📱

Portable Measurement Product

The ATTINY44A-MMH can serve as the control component in a compact handheld or battery-operated measurement product. Its 12 I/O lines can support switches, displays, indicators, and external sensing devices, while 256 bytes of EEPROM stores calibration constants or user settings. The 20 MHz clock supports responsive control of short measurement and display sequences without requiring a high-performance processor. For a portable design, operating mode and peripheral shutdown should be managed carefully because final battery life depends on the complete circuit and firmware. A compact PCB also benefits from the small QFN footprint, although exposed-pad soldering, assembly inspection, and thermal management still require process controls.

🔐

Security and Access Control

The ATTINY44A-MMH can be incorporated into small access-control peripherals such as keypad readers, lock controllers, credential interfaces, and alarm modules. The 12 I/O lines support buttons, indicators, relays, and communication signals, while the hardware PWM channels can control indicator brightness or simple actuator signaling. Its 4 KB flash capacity fits focused firmware with deliberate memory budgeting. Security-critical products should add authenticated communications where required, protected storage practices, secure boot procedures, and physical tamper considerations rather than relying on the MCU model alone. Validate worst-case input timing, relay transients, and firmware update procedures before production release.

What are the key specifications of ATTINY44A-MMH that engineers should know?
The ATTINY44A-MMH is a 20 MHz, 8-bit AVR microcontroller with 4 KB of ISP flash, 256 bytes of EEPROM, 256 bytes of SRAM, and 12 general-purpose I/O lines. According to the Microchip ATtiny44A product page, it also provides 32 general-purpose working registers, an 8-bit timer/counter, and two PWM channels. The exact orderable device is supplied in a compact 20-VQFN package measuring 3 x 3 mm.
Where can I download the ATTINY44A-MMH datasheet PDF?
The ATTINY44A-MMH datasheet PDF is available through the Microchip ATtiny44A product page and the manufacturer-document mirror listed for this device. Use the manufacturer datasheet to review the complete electrical characteristics, package drawing, pin configuration, memory organization, and programming specifications. The product page identifies 4 KB flash, 256-byte EEPROM, 256-byte SRAM, 12 I/O lines, and a 20 MHz maximum clock.
Where can I find the ATTINY44A pinout for the 20-VQFN package?
The ATTINY44A pinout for the 20-VQFN package is presented in the manufacturer datasheet's package and pin-configuration section. For ATTINY44A-MMH, the package is 20-VQFN, 3 x 3 mm. Use that drawing to identify power, ground, programming, reset, I/O, and exposed-pad connections before assigning PCB nets or ordering a footprint.
What is the ATtiny44A-MMH operating voltage and clock speed?
The ATTINY44A-MMH supports operation from 1.8 V and has a maximum clock frequency of 20 MHz. According to the Microchip product page, the controller is based on the AVR enhanced RISC architecture and includes 4 KB of in-system programmable flash. Exact operating limits and timing conditions for each voltage range should be confirmed in the manufacturer electrical-characteristics tables.
How is ATTINY44A-MMH programmed?
The ATTINY44A-MMH uses in-system programming, allowing firmware to be written while the controller is mounted on the target board. The ATtiny44A family provides 4 KB of ISP flash for program storage, while 256 bytes of EEPROM can retain operating parameters without power. Production programming procedures, fuse settings, and interface details should follow the manufacturer programming and boot-loader documentation.
What is ATTINY44A-MMH used for?
ATTINY44A-MMH is used for compact embedded-control products that need modest processing, memory, timing, and I/O resources. Its 12 I/O lines, two PWM channels, 20 MHz clock, and 4 KB flash suit sensor interfaces, LED controllers, small actuator controls, appliances, and industrial modules. The device is most appropriate when deterministic control can be achieved without a higher-memory processor.
Is ATTINY44A-MMH suitable for a low-power embedded design?
The ATTINY44A-MMH can suit low-power embedded designs because it combines a compact 3 x 3 mm package with 256 bytes of SRAM and 4 KB of flash for small firmware images. Its two PWM channels and 12 I/O lines minimize external peripheral count in suitable designs. Final power consumption depends on operating mode, clock configuration, enabled peripherals, and firmware behavior.
ATTINY44A-MMH vs ATTINY84A-MMH: which is better for a compact controller?
Choose the ATTINY44A-MMH when 4 KB of flash, 256 bytes of EEPROM, and 256 bytes of SRAM are sufficient; choose the ATTINY84A-MMH when the larger memory and expanded peripheral resources are required. Both use the 20-VQFN 3 x 3 mm package in the listed ordering forms, but the ATTINY84A provides 8 KB of flash, making it the better option for larger firmware or more complex applications.
Can ATTINY84A-MMH replace ATTINY44A-MMH on the same PCB?
ATTINY84A-MMH can serve as a same-package candidate when its additional memory and peripheral resources are acceptable, because both devices are identified with a 20-VQFN 3 x 3 mm package. However, software timing, interrupt use, pin multiplexing, and application-specific requirements must be reviewed before production use. The ATTINY84A has 8 KB of flash versus 4 KB in the ATTINY44A.
When should I choose ATTINY44A-MMH over ATTINY84A-MMH?
Choose ATTINY44A-MMH when its 4 KB flash, 256-byte EEPROM, 256-byte SRAM, 12 I/O lines, and two PWM channels satisfy the design without exceeding software or memory limits. Choose ATTINY84A-MMH when additional flash, SRAM, EEPROM, or peripheral capacity is needed. This choice matters most for firmware-heavy controls, multiple communication tasks, or designs already near memory limits.
What is the best drop-in replacement for ATTINY44A-MMH?
ATTINY84A-MMH is the closest qualified same-package candidate because it retains the 20-VQFN 3 x 3 mm format while increasing flash memory from 4 KB to 8 KB. It is not an unconditional substitution: verify pin multiplexing, interrupt assignments, startup behavior, and firmware resource assumptions. Use the Request a Quote form on this page to discuss the exact replacement requirement and sourcing.
Is ATTINY44A-MMH the same as ATTINY441-MMH?
No. ATTINY44A-MMH and ATTINY441-MMH share the 20-VQFN 3 x 3 mm package family and a 20 MHz class of AVR controller, but they are not functionally identical devices. The ATTINY441 belongs to a different ATtiny subfamily with a different peripheral mix. Review the manufacturer pin and peripheral descriptions before treating one as a replacement.
Can ATTINY24A-MMH be used as a replacement for ATTINY44A-MMH?
ATTINY24A-MMH can fit the same physical 20-VQFN 3 x 3 mm package class, but its smaller memory resources make it unsuitable as a general drop-in replacement for every ATTINY44A-MMH design. The ATTINY44A provides 4 KB of flash, 256 bytes of EEPROM, and 256 bytes of SRAM. Confirm program size, RAM demand, peripherals, and pin functions before selecting it.
Where can I buy ATTINY44A-MMH and check current availability?
Use the Request a Quote form on this page to request current ATTINY44A-MMH availability, lead time, minimum order quantity, and a quotation for the exact 20-VQFN ordering code. The manufacturer product page and authorized-channel listings identify the device as ATTINY44A-MMH with a 20 MHz clock and 20-VQFN package, but stock and lead time should be confirmed for the requested quantity.
What is the price of ATTINY44A-MMH?
The current commercial quotation for ATTINY44A-MMH is available through the Request a Quote form on this page. Pricing depends on quantity, required delivery schedule, and the requested package and documentation requirements. Submit the target quantity to obtain a current response rather than relying on a historical or incomplete unit-price reference.
What is the lead time for ATTINY44A-MMH?
Request the current ATTINY44A-MMH lead time through the Request a Quote form on this page, including your required quantity, shipment destination, and production schedule. Lead time can vary with order volume and inventory movement. The exact MPN, ATTINY44A-MMH, should be specified to avoid ambiguity with other package, reel, or temperature-ordering variants.
Is ATTINY44A-MMH RoHS compliant?
The ATTINY44A-MMH is identified as a Green QFN device with NiPdAu termination in the product listing, but the complete RoHS and REACH declarations must be confirmed from the manufacturer's compliance documentation for the exact ordering code. Because regulatory status is not fully stated in the technical listing, treat RoHS, REACH, lead-free, and halogen-free status as unknown until the applicable declaration is reviewed.

Dữ liệu tham khảo kỹ thuật cho ATTINY44A-MMH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ATTINY44A-MMH for a compact embedded controller that needs a 20 MHz AVR core, 4 KB of flash, 256 bytes of SRAM and EEPROM, 12 I/O lines, and two PWM channels. It is a strong fit for small sensor interfaces, appliance controls, LED controllers, and limited motor-control functions. Select ATTINY84A-MMH when firmware size, RAM, EEPROM, or additional PWM channels make the smaller controller too constrained. Consider ATTINY24A-MMH only when its reduced memory budget is acceptable and every required peripheral and pin function has been checked. ATTINY441-MMH is appropriate only when its different ATtiny441 peripheral set satisfies the application without changing the board's required functions. For every alternative, compare the exact package drawing, pin multiplexing, interrupt map, timer resources, analog channels, programming pins, and firmware assumptions before production use.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ATTINY84A-MMH ATTINY24A-MMH ATTINY441-MMH
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-VQFN (3 x 3 mm) 20-VQFN (3 x 3 mm) 20-VQFN (3 x 3 mm) 20-VQFN (3 x 3 mm)
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
General-Purpose I/O Lines 12 12 12 12
PWM Channels 2 4 2 4
Programming In-system programmable In-system programmable In-system programmable In-system programmable
Architecture 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC

Bảo phân biệt quan trọng

  • Balanced memory and peripheral set for compact embedded control (vsATTINY84A-MMH)
  • Two hardware PWM channels support compact dual-channel timing (vsATTINY84A-MMH)
  • Compact 3 x 3 mm VQFN implementation (vsATTINY24A-MMH)

Ghi chú thiết kế

Place the supply decoupling capacitor immediately beside the ATTINY44A-MMH power and ground pins, with the shortest practical ground return to the device. Keep programming, clock, and switching-node routes away from analog inputs. Because the package is only 3 x 3 mm, use a manufacturer-compatible land pattern and verify the exposed-pad connection before fabrication.

Assign timer-capable pins to PWM outputs before finalizing the schematic so the two hardware PWM channels can be used without software bit-banging. Avoid placing sensitive sensor traces beside the exposed pad, programming interface, or fast-switching power circuitry. A short ground plane under the device and a controlled return path will reduce susceptibility to coupling between compact digital and analog sections.

Do not substitute a different ATtiny member based only on the package and clock rate. Pin multiplexing, memory capacity, interrupt assignments, timer channels, and analog peripherals can differ even when the physical package matches. Check the exact MPN suffix, manufacturer pin table, fuse configuration, and firmware resource usage before approving any alternative for production.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The listing identifies the device as Green with NiPdAu termination. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the exact ATTINY44A-MMH ordering code require confirmation from the manufacturer's compliance documentation.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

attiny44a datasheet attiny44a pinout attiny44a programming attiny44a pdf attiny44a ssur attiny44a ssn ATTINY44A-MMH datasheet pdf ATTINY44A-MMH pinout ATTINY44A-MMH programming ATTINY44A-MMH equivalent ATTINY44A-MMH replacement ATTINY44A-MMH vs ATTINY84A-MMH ATTINY44A-MMH price Microchip ATTINY44A-MMH ATTINY44A 20MHz VQFN controller

Các bộ phận và thuật ngữ liên quan

Microchip Technology ATTINY44A-MMH ATTINY44A ATTINY84A-MMH ATTINY24A-MMH ATTINY441-MMH AVR enhanced RISC architecture 8-bit microcontroller TinyAVR RISC In-system programming ISP flash EEPROM SRAM PWM 20 MHz 20-VQFN QFN 3 x 3 mm package industrial temperature sensor interface LED lighting controller small motor controller appliance control embedded control
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ