ATXMEGA128D3-AN - 32MHz 128KB AVR MCU | Microchip | TQFP-64
MPN: ATXMEGA128D3-AN ✓ Hoạt độngATXMEGA128D3-AN Tóm tắt
An AVR XMEGA microcontroller is an 8/16-bit MCU that combines a RISC processing core, embedded Flash and EEPROM, SRAM, timers, event control, communications peripherals, and interrupt handling on one integrated device. The XMEGA D3 family is positioned for low-power, peripheral-rich embedded systems where deterministic event routing, multiple timers, and flexible serial interfaces are more important than a high-performance 32-bit processor core.
The ATXMEGA128D3-AN provides 128 KB of read-while-write ISP Flash, including an 8 KB boot-code section, alongside 2 KB of EEPROM and 8 KB of SRAM. Its four-channel event system links peripherals directly to other system functions, reducing processor intervention for timing-sensitive tasks. A programmable multi-level interrupt controller supports structured handling of asynchronous events across the system.
Five flexible 16-bit timer/counter modules support compare modes and PWM generation, while a separate 16-bit real-time counter provides another dedicated timing resource. The 50 GPIO lines make the device suitable for control, monitoring, communications, and mixed-signal control systems that require more external connections than a small 20- or 32-pin MCU can offer.
Typical uses include industrial control modules, data acquisition units, communications equipment, embedded gateways, sensor controllers, and compact automation products. The 64-pin TQFP package provides substantial I/O and peripheral access while remaining compatible with conventional surface-mount assembly and multilayer PCB layouts.
Designers should use the manufacturer pin-description table when assigning every TQFP-64 signal, and should preserve the device's specified decoupling and programming-test requirements. Review the clock, memory, boot, and peripheral configuration sections before finalizing PCB routing and firmware safeguards.
This page combines the manufacturer product specifications with focused engineering guidance, package details, lifecycle information, and an explicit assessment of drop-in alternatives. It is intended to help engineers evaluate memory capacity, timing resources, GPIO availability, package compatibility, and sourcing requirements before committing the ATXMEGA128D3-AN to a new design.
Bộ thay thế dễ dàng lắp đặt cho ATXMEGA128D3-AN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
ATXMEGA128D3-AUR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA128D3-ANR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA128D3-AU
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA128D3-AURA1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA128D3-AN Tỷ lệ tối đa & tính chất điện
| Microcontroller Family | AVR XMEGA D3 |
| Architecture | Enhanced RISC, 8/16-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 64K x 16 bits |
| Boot Code Section | 8 KB |
| EEPROM | 2 KB |
| SRAM | 8 KB |
| General-Purpose I/O | 50 lines |
| Event System Channels | 4 channels |
| Real-Time Counter | 16-bit |
| Timer/Counter Modules | 5 modules, 16-bit |
| Timer Features | Compare modes and PWM |
| Operating Voltage | 1.6 V to 3.6 V |
| Hộp | 64-pin TQFP |
| Package Dimensions | 14 x 14 mm |
| Kiểu lắp đặt | Surface mount |
| Programmable Multi-Level Interrupt Controller | Yes |
| Read-While-Write Flash | Yes |
Hướng dẫn cấu hình chân ATXMEGA128D3-AN 14 x 14 mm
Cấu hình chân cho ATXMEGA128D3-AN (14 x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATXMEGA128D3-AN.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATXMEGA128D3-AN phù hợp cho 6 Áp dụngs: Industrial Control Modules, Data Acquisition and Sensor Hubs, Communications Gateways, Motor and PWM Control, LED Lighting and Display Control, Low-Power Embedded Control.
Industrial Control Modules
The ATXMEGA128D3-AN fits industrial control modules that combine multiple discrete signals, periodic outputs, and local decision-making. Its five 16-bit timer/counters support compare and PWM operations, while 50 GPIO lines provide connectivity for sensors, interlocks, actuators, and status indicators. At 32 MHz, the enhanced RISC core can handle protocol processing and control logic without a separate processor. The 128 KB read-while-write ISP Flash is useful for maintaining firmware while another section is operational, and the 2 KB EEPROM supports persistent calibration or configuration data. In a compact controller, place local timing-sensitive functions on the event system and dedicated timers to reduce processor jitter and simplify firmware scheduling.
Được đề xuất
Data Acquisition and Sensor Hubs
The ATXMEGA128D3-AN is suitable for data-acquisition and sensor-hub designs that need broad I/O access alongside local timing functions. Fifty GPIO lines can be allocated to digital sensors, alarm inputs, and communication links, while the four-channel event system can coordinate peripheral events without relying entirely on software polling. The 8 KB SRAM supports buffered measurements and protocol state, and the 128 KB Flash provides room for calibration routines, data formatting, and communications firmware. Its five 16-bit timer/counters are useful for sampling intervals, sensor timeouts, and PWM-based excitation. A practical design should use the device's four-channel event system for precise capture and routing, preserving CPU time for filtering, scaling, and forwarding measurements to a host or edge controller.
Được đề xuất
Communications Gateways
The ATXMEGA128D3-AN can serve as the protocol-management microcontroller in a compact communications gateway when the design values deterministic timing and extensive I/O over maximum processor performance. Its 50 GPIO lines can support multiple serial interfaces, status LEDs, reset controls, and carrier-enable signals, while the five 16-bit timer/counters can handle baud-rate timing, pulse measurement, and periodic keepalive tasks. The 128 KB Flash accommodates protocol stacks and update code, and 8 KB of SRAM is sufficient for modest frame buffering. Four event-system channels allow communication, timer, and external interrupt events to be linked directly. For a gateway design, validate each peripheral's pin multiplexing and route high-speed signals away from sensitive analog sections to preserve timing margin.
Được đề xuất
Motor and PWM Control
The ATXMEGA128D3-AN is appropriate for compact motor, valve, and PWM-driven actuator controllers. Five 16-bit timer/counters with compare modes and PWM support allow several independently timed outputs to share one microcontroller, while the 16-bit real-time counter supports additional long-range timing. Fifty GPIO lines leave ample capacity for direction controls, fault inputs, Hall sensors, and interlocks. The 32 MHz CPU can execute motion-state logic and safety monitoring while the hardware timers generate deterministic pulse trains. The 1.6 V to 3.6 V operating range supports low-voltage embedded systems when paired with an appropriate motor driver. Verify current limits and protection requirements in the external power stage, and use the timer outputs rather than software bit-banging wherever accurate pulse timing is required.
Được đề xuất
LED Lighting and Display Control
The ATXMEGA128D3-AN can coordinate LED status indicators, panel controls, and multi-channel lighting effects in compact embedded products. Five 16-bit timer/counters provide PWM channels for brightness control and timing-based effects, while the event system can connect button events, timers, and communication updates without continuous polling. The 50 GPIO lines allow display control, color selection, fault indicators, and serial configuration to be consolidated in one device. Its 128 KB Flash supports graphics tables, animation state machines, and field-update logic, while 8 KB of SRAM accommodates display buffers or communication frames. Use timer outputs for PWM generation to avoid inaccurate software timing. Validate LED drive currents with suitable transistor or constant-current circuitry rather than driving high-current loads directly from the microcontroller pins.
Được đề xuất
Low-Power Embedded Control
The ATXMEGA128D3-AN is well suited to low-power embedded controllers that combine event-driven sensing with several timed outputs. The four-channel event system can route signals among peripherals, reducing the need to poll inputs continuously and supporting sleep-oriented firmware strategies. Its 32 MHz processing rate handles local logic, while 128 KB of Flash stores application code and the 2 KB EEPROM retains configuration values across resets. Five 16-bit timers cover periodic sampling, watchdog-style timing, and PWM outputs, while 50 GPIO lines provide broad sensor and actuator access. The 1.6 V to 3.6 V range allows operation from low-voltage rails when the clock and peripheral configuration are appropriate. Validate each low-power mode, regulator quiescent current, and wake-up timing in the final power-supply design because firmware utilization alone does not determine board-level consumption.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATXMEGA128D3-AN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATXMEGA128D3-AUR | ATXMEGA128D3-ANR | ATXMEGA128D3-AU | ATXMEGA128D3-AURA1 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Architecture | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| General-Purpose I/O | 50 lines | 50 lines | 50 lines | 50 lines | 50 lines |
| Timer/Counters | 5 flexible 16-bit timer/counters | 5 flexible 16-bit timer/counters | 5 flexible 16-bit timer/counters | 5 flexible 16-bit timer/counters | 5 flexible 16-bit timer/counters |
| Event System | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Special Ordering Feature | AN suffix configuration | AUR suffix configuration | ANR tape-and-reel ordering configuration | AU suffix configuration | AURA1 suffix configuration |
Bảo phân biệt quan trọng
- High peripheral density for deterministic embedded control (vsATMEGA32-16AU)
- Substantially broader general-purpose I/O access (vsATTINY44A-MUR)
- Larger local memory than a compact 8-bit controller (vsMC9S08SH8CTGR)
- Event-driven peripheral routing (vsSTM8S103F3P3TR)
Ghi chú thiết kế
Assign the 64-pin TQFP footprint directly from the Microchip package drawing and verify every pin against the selected peripheral multiplexing. Keep the decoupling network at the supply pins and provide a clean return path for each capacitor. Because the device offers 50 GPIO lines and multiple analog-capable functions, review the pin-description table before reserving a signal for a peripheral; a valid logic function on one pin may have a different analog or peripheral role on another.
Design the supply around the 1.6 V to 3.6 V operating range and ensure the voltage remains valid during startup, shutdown, and peripheral activity. Use the manufacturer guidelines for decoupling capacitance and regulator performance rather than substituting bulk capacitance alone. Low-frequency operation can reduce dynamic power, while faster clocking and active timers increase it, so validate the clock tree, sleep modes, and peripheral clocks in the final firmware and power-supply design.
Do not treat every ATXMEGA128D3 suffix as electrically and commercially interchangeable without checking the ordering table. The -AN, -ANR, -AU, -AUR, and -AURA1 identifiers can encode different grade or packing choices even when the processor, memory, and package match. Confirm the exact suffix, temperature range, packing form, and required qualification before approving a substitution or changing the BOM.
Give clock lines, reset, and programming interfaces clean routing away from switching nodes and high-current outputs. Preserve the manufacturer's recommended programming and debug access so the assembled board can be programmed and diagnosed without invasive rework. When using external sensors or power converters, separate their switching return currents from sensitive MCU ground paths to reduce offset, false interrupts, and timing jitter in precision control applications.
Thông tin tuân thủ
Compliance status is not explicitly stated for the exact ordering code in the cited product and distributor information. The Mouser listing identifies the ATXMEGA128D3-AN as green, but this field is not treated as proof of every requested compliance category.