Microchip Technology

ATXMEGA128D3-AN - 32MHz 128KB AVR MCU | Microchip | TQFP-64

부품 번호: ATXMEGA128D3-AN ✓ 활성
1.6 V to 3.6 V Vdss 64-pin TQFP Package 32 MHz Speed 128 KB Memory
MOQ: 1 |

ATXMEGA128D3-AN 개요

The Microchip Technology ATXMEGA128D3-AN is a low-power, high-performance 8/16-bit AVR XMEGA D3 microcontroller with a 32 MHz operating frequency, 128 KB of ISP Flash memory, 2 KB of EEPROM, and 8 KB of SRAM. The device is supplied in a 64-pin TQFP package measuring 14 x 14 mm and supports operating voltages from 1.6 V to 3.6 V. Its enhanced RISC architecture combines deterministic peripheral handling with 50 general-purpose I/O lines.

An AVR XMEGA microcontroller is an 8/16-bit MCU that combines a RISC processing core, embedded Flash and EEPROM, SRAM, timers, event control, communications peripherals, and interrupt handling on one integrated device. The XMEGA D3 family is positioned for low-power, peripheral-rich embedded systems where deterministic event routing, multiple timers, and flexible serial interfaces are more important than a high-performance 32-bit processor core.

The ATXMEGA128D3-AN provides 128 KB of read-while-write ISP Flash, including an 8 KB boot-code section, alongside 2 KB of EEPROM and 8 KB of SRAM. Its four-channel event system links peripherals directly to other system functions, reducing processor intervention for timing-sensitive tasks. A programmable multi-level interrupt controller supports structured handling of asynchronous events across the system.

Five flexible 16-bit timer/counter modules support compare modes and PWM generation, while a separate 16-bit real-time counter provides another dedicated timing resource. The 50 GPIO lines make the device suitable for control, monitoring, communications, and mixed-signal control systems that require more external connections than a small 20- or 32-pin MCU can offer.

Typical uses include industrial control modules, data acquisition units, communications equipment, embedded gateways, sensor controllers, and compact automation products. The 64-pin TQFP package provides substantial I/O and peripheral access while remaining compatible with conventional surface-mount assembly and multilayer PCB layouts.

Designers should use the manufacturer pin-description table when assigning every TQFP-64 signal, and should preserve the device's specified decoupling and programming-test requirements. Review the clock, memory, boot, and peripheral configuration sections before finalizing PCB routing and firmware safeguards.

This page combines the manufacturer product specifications with focused engineering guidance, package details, lifecycle information, and an explicit assessment of drop-in alternatives. It is intended to help engineers evaluate memory capacity, timing resources, GPIO availability, package compatibility, and sourcing requirements before committing the ATXMEGA128D3-AN to a new design.

드롭인 대체품: ATXMEGA128D3-AN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

ATXMEGA128D3-AUR

✅ 드롭인
📦 64-TQFP (14x14)
Same 32 MHz, 128 KB Flash, 2 KB EEPROM, and 8 KB SRAM family ratings; suffix-specific temperature grade and tape-and-reel packing differ, with no core rating change.

📋 참조 대체품 (카탈로그에 없음)

ATXMEGA128D3-ANR

✅ 드롭인
📦 64-TQFP (14x14)
Same 32 MHz and 128 KB Flash family ratings and same 64-pin TQFP footprint; packing differs from the target ordering code.

📋 참조 대체품 (카탈로그에 없음)

ATXMEGA128D3-AU

✅ 드롭인
📦 64-TQFP (14x14)
Same XMEGA D3 core, 32 MHz operation, 128 KB Flash, and 64-pin TQFP format; ordering suffix changes the device's specified ordering configuration.

📋 참조 대체품 (카탈로그에 없음)

ATXMEGA128D3-AURA1

✅ 드롭인
📦 64-TQFP (14x14)
Same XMEGA D3 core and 64-pin TQFP format; the A1 suffix denotes a different ordering configuration while the key memory and clock ratings remain equivalent.

📋 참조 대체품 (카탈로그에 없음)

ATXMEGA128D3-AN 최대 정격 & 전기적 특성

Microcontroller Family AVR XMEGA D3
Architecture Enhanced RISC, 8/16-bit
Maximum CPU Frequency 32 MHz
Flash Memory 128 KB
Flash Organization 64K x 16 bits
Boot Code Section 8 KB
EEPROM 2 KB
SRAM 8 KB
General-Purpose I/O 50 lines
Event System Channels 4 channels
Real-Time Counter 16-bit
Timer/Counter Modules 5 modules, 16-bit
Timer Features Compare modes and PWM
Operating Voltage 1.6 V to 3.6 V
패키지 64-pin TQFP
Package Dimensions 14 x 14 mm
실장 유형 Surface mount
Programmable Multi-Level Interrupt Controller Yes
Read-While-Write Flash Yes

ATXMEGA128D3-AN 14 x 14 mm 핀 구성 가이드

ATXMEGA128D3-AN(14 x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATXMEGA128D3-AN의 14 x 14 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATXMEGA128D3-AN.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATXMEGA128D3-AN 적합 용도: 6 애플리케이션s: Industrial Control Modules, Data Acquisition and Sensor Hubs, Communications Gateways, Motor and PWM Control, LED Lighting and Display Control, Low-Power Embedded Control.

🏭

Industrial Control Modules

The ATXMEGA128D3-AN fits industrial control modules that combine multiple discrete signals, periodic outputs, and local decision-making. Its five 16-bit timer/counters support compare and PWM operations, while 50 GPIO lines provide connectivity for sensors, interlocks, actuators, and status indicators. At 32 MHz, the enhanced RISC core can handle protocol processing and control logic without a separate processor. The 128 KB read-while-write ISP Flash is useful for maintaining firmware while another section is operational, and the 2 KB EEPROM supports persistent calibration or configuration data. In a compact controller, place local timing-sensitive functions on the event system and dedicated timers to reduce processor jitter and simplify firmware scheduling.

🧩

Data Acquisition and Sensor Hubs

The ATXMEGA128D3-AN is suitable for data-acquisition and sensor-hub designs that need broad I/O access alongside local timing functions. Fifty GPIO lines can be allocated to digital sensors, alarm inputs, and communication links, while the four-channel event system can coordinate peripheral events without relying entirely on software polling. The 8 KB SRAM supports buffered measurements and protocol state, and the 128 KB Flash provides room for calibration routines, data formatting, and communications firmware. Its five 16-bit timer/counters are useful for sampling intervals, sensor timeouts, and PWM-based excitation. A practical design should use the device's four-channel event system for precise capture and routing, preserving CPU time for filtering, scaling, and forwarding measurements to a host or edge controller.

🌐

Communications Gateways

The ATXMEGA128D3-AN can serve as the protocol-management microcontroller in a compact communications gateway when the design values deterministic timing and extensive I/O over maximum processor performance. Its 50 GPIO lines can support multiple serial interfaces, status LEDs, reset controls, and carrier-enable signals, while the five 16-bit timer/counters can handle baud-rate timing, pulse measurement, and periodic keepalive tasks. The 128 KB Flash accommodates protocol stacks and update code, and 8 KB of SRAM is sufficient for modest frame buffering. Four event-system channels allow communication, timer, and external interrupt events to be linked directly. For a gateway design, validate each peripheral's pin multiplexing and route high-speed signals away from sensitive analog sections to preserve timing margin.

⚡

Motor and PWM Control

The ATXMEGA128D3-AN is appropriate for compact motor, valve, and PWM-driven actuator controllers. Five 16-bit timer/counters with compare modes and PWM support allow several independently timed outputs to share one microcontroller, while the 16-bit real-time counter supports additional long-range timing. Fifty GPIO lines leave ample capacity for direction controls, fault inputs, Hall sensors, and interlocks. The 32 MHz CPU can execute motion-state logic and safety monitoring while the hardware timers generate deterministic pulse trains. The 1.6 V to 3.6 V operating range supports low-voltage embedded systems when paired with an appropriate motor driver. Verify current limits and protection requirements in the external power stage, and use the timer outputs rather than software bit-banging wherever accurate pulse timing is required.

💡

LED Lighting and Display Control

The ATXMEGA128D3-AN can coordinate LED status indicators, panel controls, and multi-channel lighting effects in compact embedded products. Five 16-bit timer/counters provide PWM channels for brightness control and timing-based effects, while the event system can connect button events, timers, and communication updates without continuous polling. The 50 GPIO lines allow display control, color selection, fault indicators, and serial configuration to be consolidated in one device. Its 128 KB Flash supports graphics tables, animation state machines, and field-update logic, while 8 KB of SRAM accommodates display buffers or communication frames. Use timer outputs for PWM generation to avoid inaccurate software timing. Validate LED drive currents with suitable transistor or constant-current circuitry rather than driving high-current loads directly from the microcontroller pins.

🔧

Low-Power Embedded Control

The ATXMEGA128D3-AN is well suited to low-power embedded controllers that combine event-driven sensing with several timed outputs. The four-channel event system can route signals among peripherals, reducing the need to poll inputs continuously and supporting sleep-oriented firmware strategies. Its 32 MHz processing rate handles local logic, while 128 KB of Flash stores application code and the 2 KB EEPROM retains configuration values across resets. Five 16-bit timers cover periodic sampling, watchdog-style timing, and PWM outputs, while 50 GPIO lines provide broad sensor and actuator access. The 1.6 V to 3.6 V range allows operation from low-voltage rails when the clock and peripheral configuration are appropriate. Validate each low-power mode, regulator quiescent current, and wake-up timing in the final power-supply design because firmware utilization alone does not determine board-level consumption.

What are the key specifications of ATXMEGA128D3-AN that engineers should know?
The ATXMEGA128D3-AN combines a 32 MHz enhanced RISC core with 128 KB of ISP Flash, 2 KB of EEPROM, 8 KB of SRAM, and 50 GPIO lines in a 64-pin TQFP package. According to the Microchip ATxmega128D3 product page, it also includes four event-system channels, a programmable multi-level interrupt controller, a 16-bit real-time counter, and five flexible 16-bit timer/counters with compare and PWM modes.
What is the operating voltage of ATXMEGA128D3-AN?
The ATXMEGA128D3-AN operates from 1.6 V to 3.6 V. According to the Microchip ATxmega128D3 product documentation, this low-voltage range supports the device's low-power embedded design role. Confirm the power architecture and clock configuration on the PCB so that every rail remains within the manufacturer's operating limits during startup, transients, and maximum peripheral activity.
How much memory does the ATXMEGA128D3-AN contain?
The ATXMEGA128D3-AN contains 128 KB of ISP Flash, 2 KB of EEPROM, and 8 KB of SRAM. According to the Microchip product page, the Flash includes an 8 KB boot-code section and supports read-while-write operation. This mix allows application code, persistent configuration, and volatile working data to be separated without requiring an external memory device.
Where can I download the ATXMEGA128D3-AN datasheet PDF?
The official ATXMEGA128D3-AN documentation is available through the Microchip ATxmega128D3 product page at https://www.microchip.com/en-us/product/ATxmega128D3. The manufacturer datasheet is the controlling source for pin names, electrical limits, clocking, memory organization, and package drawings. Use it when creating the PCB footprint and when validating low-power firmware settings.
Where can I find the ATXMEGA128D3-AN pinout?
The ATXMEGA128D3-AN uses a 64-pin TQFP package measuring 14 x 14 mm, and its pin assignments are documented in the Microchip manufacturer datasheet. Use the package drawing and pin-description table together because exposed functionality depends on multiplexing, peripheral configuration, and the selected clock and package options. The device can also be configured through a compatible AVR programming interface.
What is the ATXMEGA128D3-AN used for?
The ATXMEGA128D3-AN is used in low-power embedded control, monitoring, timing, and communications systems that benefit from 50 GPIO lines and dedicated 16-bit timers. According to the Microchip product page, its four-channel event system can connect peripherals for deterministic actions, while five timer/counters support compare and PWM functions. These resources suit industrial controllers, acquisition equipment, gateways, and sensor nodes.
What is the difference between ATXMEGA128D3-AN and ATXMEGA128D3-AUR?
Both parts are listed as 32 MHz, 128 KB-Flash AVR XMEGA D3 microcontrollers in 64-pin TQFP packages. The -ANR and -AUR identifiers distinguish ordering, temperature, or tape-and-reel options rather than establishing a different processor architecture. Confirm the exact suffix, grade, and packing code in the manufacturer ordering information before treating either option as a production substitute.
What can replace the ATXMEGA128D3-AN?
The closest documented same-family choices are Microchip ATXMEGA128D3-AUR and ATXMEGA128D3-ANR, both associated with the 64-pin TQFP version of the ATXMEGA128D3 family. They can simplify sourcing when their suffix-specific grade and packing requirements match the design. They should not be treated as automatic replacements without checking temperature range, boot configuration, pin compatibility, and assembly packing.
Is ATXMEGA128D3-AN suitable for industrial control applications?
The ATXMEGA128D3-AN is architecturally suitable for many industrial control tasks because it provides 32 MHz processing, 128 KB of Flash, five 16-bit timer/counters, PWM support, four event-system channels, and 50 GPIO lines. Suitability for a deployed industrial product also depends on its specified temperature grade, operating-voltage limits, certification requirements, and long-term availability, which must be checked against the exact ordering code.
ATXMEGA128D3-AN vs ATXMEGA128D3-MNR - which is better for a new design?
ATXMEGA128D3-AN is the 64-pin TQFP option and is the relevant choice when a PCB footprint is already designed around that package. ATXMEGA128D3-MNR is a different package variant, so it is not a drop-in replacement without changing the PCB. Compare pin availability, package dimensions, exposed connections, temperature grade, and required peripheral multiplexing before selecting between them.
When should I choose ATXMEGA128D3-AN over another XMEGA D3 device?
Choose the ATXMEGA128D3-AN when the design requires the 64-pin TQFP footprint, 128 KB of read-while-write Flash, 8 KB of SRAM, 50 GPIO lines, and several 16-bit timing resources. Choose a smaller package only when fewer I/O lines are needed, or choose another suffix only after verifying the exact temperature, packing, and qualification requirements.
Where can I buy ATXMEGA128D3-AN online?
The ATXMEGA128D3-AN can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, quantity, and lead-time confirmation rather than relying on a static listing that may not represent current stock. When requesting a quote, specify the required tray or tape-and-reel packing and any temperature-grade requirements.
What is the lead time for ATXMEGA128D3-AN?
Lead time and current inventory should be confirmed through the Request a Quote form on this page. Microchip devices can have different commercial conditions across the exact -AN suffix and volume requested, so a quotation should include the target quantity, packaging form, shipment destination, and required delivery date. This also allows production planners to confirm whether an alternate approved source is necessary.
Is ATXMEGA128D3-AN in stock?
Current stock for ATXMEGA128D3-AN should be confirmed through the Request a Quote form on this page. Search-result listings can change without notice and may represent a single unit price rather than a guaranteed production quantity. Include your required order quantity and acceptable lead time so the response reflects the actual sourcing position for the exact ordering code.
What is the best cross-brand equivalent for ATXMEGA128D3-AN?
No cross-brand drop-in equivalent for the ATXMEGA128D3-AN is established by the available manufacturer and distributor information. A different manufacturer's 8/16-bit MCU may offer similar memory and timing resources, but matching the 64-pin TQFP footprint, peripheral multiplexing, event system, interrupt behavior, and AVR toolchain is necessary for true replacement. Treat cross-brand proposals as redesign candidates rather than solder-in substitutes.

엔지니어링 참조 데이터: ATXMEGA128D3-AN — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ATXMEGA128D3-AN when the PCB is designed around a 64-pin TQFP and the application needs the XMEGA D3 combination of a 32 MHz AVR core, 128 KB Flash, 8 KB SRAM, 50 GPIO lines, five 16-bit timer/counters, and a four-channel event system. It is particularly attractive for industrial control, acquisition, communications, and PWM-based systems where deterministic peripheral routing reduces software overhead. Choose ATXMEGA128D3-AUR or ATXMEGA128D3-ANR for sourcing flexibility only after confirming the exact suffix grade and packing. ATXMEGA128D3-AU and ATXMEGA128D3-AURA1 also use the same family architecture, but their ordering conditions must be reviewed. None of the listed alternatives improves the core memory or timing resources. If a smaller package is acceptable, choose a smaller MCU and accept fewer GPIO and timer resources; if another manufacturer's MCU is preferred, treat it as a firmware and PCB redesign rather than a drop-in substitution.

대체품과의 비교

파라미터 이 제품 ATXMEGA128D3-AUR ATXMEGA128D3-ANR ATXMEGA128D3-AU ATXMEGA128D3-AURA1
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-TQFP (14x14) 64-TQFP (14x14) 64-TQFP (14x14) 64-TQFP (14x14) 64-TQFP (14x14)
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Architecture 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC
Flash Memory 128 KB 128 KB 128 KB 128 KB 128 KB
EEPROM 2 KB 2 KB 2 KB 2 KB 2 KB
SRAM 8 KB 8 KB 8 KB 8 KB 8 KB
General-Purpose I/O 50 lines 50 lines 50 lines 50 lines 50 lines
Timer/Counters 5 flexible 16-bit timer/counters 5 flexible 16-bit timer/counters 5 flexible 16-bit timer/counters 5 flexible 16-bit timer/counters 5 flexible 16-bit timer/counters
Event System 4 channels 4 channels 4 channels 4 channels 4 channels
Special Ordering Feature AN suffix configuration AUR suffix configuration ANR tape-and-reel ordering configuration AU suffix configuration AURA1 suffix configuration

주요 차별점

  • High peripheral density for deterministic embedded control (vs ATMEGA32-16AU)
  • Substantially broader general-purpose I/O access (vs ATTINY44A-MUR)
  • Larger local memory than a compact 8-bit controller (vs MC9S08SH8CTGR)
  • Event-driven peripheral routing (vs STM8S103F3P3TR)

설계 노트

Assign the 64-pin TQFP footprint directly from the Microchip package drawing and verify every pin against the selected peripheral multiplexing. Keep the decoupling network at the supply pins and provide a clean return path for each capacitor. Because the device offers 50 GPIO lines and multiple analog-capable functions, review the pin-description table before reserving a signal for a peripheral; a valid logic function on one pin may have a different analog or peripheral role on another.

Design the supply around the 1.6 V to 3.6 V operating range and ensure the voltage remains valid during startup, shutdown, and peripheral activity. Use the manufacturer guidelines for decoupling capacitance and regulator performance rather than substituting bulk capacitance alone. Low-frequency operation can reduce dynamic power, while faster clocking and active timers increase it, so validate the clock tree, sleep modes, and peripheral clocks in the final firmware and power-supply design.

Do not treat every ATXMEGA128D3 suffix as electrically and commercially interchangeable without checking the ordering table. The -AN, -ANR, -AU, -AUR, and -AURA1 identifiers can encode different grade or packing choices even when the processor, memory, and package match. Confirm the exact suffix, temperature range, packing form, and required qualification before approving a substitution or changing the BOM.

Give clock lines, reset, and programming interfaces clean routing away from switching nodes and high-current outputs. Preserve the manufacturer's recommended programming and debug access so the assembled board can be programmed and diagnosed without invasive rework. When using external sensors or power converters, separate their switching return currents from sensitive MCU ground paths to reduce offset, false interrupts, and timing jitter in precision control applications.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance status is not explicitly stated for the exact ordering code in the cited product and distributor information. The Mouser listing identifies the ATXMEGA128D3-AN as green, but this field is not treated as proof of every requested compliance category.

관련 검색

ATXMEGA128D3-AN datasheet ATXMEGA128D3-AN pinout ATXMEGA128D3-AN datasheet pdf ATXMEGA128D3-AN equivalent ATXMEGA128D3-AN replacement ATXMEGA128D3-AN cross reference ATXMEGA128D3-AN footprint ATXMEGA128D3-AN price ATXMEGA128D3-AN stock Microchip ATXMEGA128D3-AN ATXMEGA128D3-AN 32MHz 128KB ATXMEGA128D3-AN TQFP-64 ATXMEGA128D3-AN vs ATXMEGA128D3-MNR ATXMEGA128D3 application circuit

관련 부품 & 용어

Microchip Technology ATXMEGA128D3-AN ATxmega128D3 ATXMEGA128D3-AUR ATXMEGA128D3-ANR ATXMEGA128D3-AU ATXMEGA128D3-AURA1 AVR XMEGA enhanced RISC architecture 8/16-bit microcontroller embedded microcontroller 32 MHz 128 KB Flash 2 KB EEPROM 8 KB SRAM 50 GPIO lines four-channel event system programmable multi-level interrupt controller 16-bit real-time counter five 16-bit timer/counters PWM TQFP-64 surface-mount package industrial control sensor hub communications gateway embedded control
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기