ATXMEGA64A3U-MH - 32MHz 64KB AVR Microcontroller | Microchip
MPN: ATXMEGA64A3U-MH ✓ Hoạt độngATXMEGA64A3U-MH Tóm tắt
An 8/16-bit microcontroller is a semiconductor device that executes embedded software from nonvolatile Flash while using SRAM for working data and EEPROM for parameters that must retain their values when power is removed. The ATXMEGA A3 family combines a microcontroller core, timers, communication interfaces, analog peripherals, and general-purpose I/O in one device, supporting industrial, communications, control, and data-acquisition designs.
The device provides 64 KB of self-programming Flash with Read-While-Write capability, including a 4 KB boot-code section, alongside 4 KB of SRAM and 2 KB of EEPROM. Its four-channel DMA controller transfers data without continuous CPU intervention, while the eight-channel event system links peripherals for deterministic event routing. The family also includes up to 50 general-purpose I/O lines.
At 32 MHz, the AVR enhanced RISC architecture can reach approximately 1 MIPS per MHz and up to 32 MIPS of throughput. Seven flexible 16-bit timer/counters provide compare and PWM functions, and the family includes seven USARTs, two TWI interfaces, and a 16-bit real-time counter. These integrated resources reduce the need for external timers, serial transceivers, and data-movement circuitry.
Typical applications include industrial monitoring, connected sensor nodes, building automation, low-power serial controllers, embedded data loggers, and compact control platforms. The combination of DMA, event-system routing, multiple serial interfaces, and 32-bit processing performance is especially useful when several peripheral operations must coexist under a deterministic embedded software architecture.
PCB design should preserve the exposed-pad land pattern and thermal-via requirements specified by the manufacturer for the 64-QFN package. Power, decoupling, clock, and programming nets should follow the datasheet reference layout, while unused I/O pins should be configured according to the device’s reset and input-buffer guidelines.
This page combines the manufacturer device specifications, package identification, family-level peripheral details, sourcing information, and application-oriented engineering guidance to support component selection and board-level implementation.
Bộ thay thế dễ dàng lắp đặt cho ATXMEGA64A3U-MH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATXMEGA64A3U-MH (cùng hình factor và footprint) — khác nhau ở Maximum Throughput, Package.
ATXMEGA64A3U-AU
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA64A3U-AUR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA64A3U-ANR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA64A3U-MNR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ATXMEGA64A3U-MH Tỷ lệ tối đa & tính chất điện
| Product Type | 8/16-bit AVR XMEGA A3U microcontroller |
| Tần số xung maksimum | 32 MHz |
| Maximum Throughput | 32 MIPS at 32 MHz |
| Flash Memory | 64 KB (32K x 16) |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 2 KB |
| DMA Channels | 4 channels |
| Event System Channels | 8 channels |
| General-Purpose I/O | Up to 50 lines |
| Timer/Counters | 7 flexible 16-bit timer/counters |
| Real-Time Counter | 16-bit |
| USART Interfaces | 7 |
| TWI Interfaces | 2 |
| Hộp | 64-QFN, 9 x 9 mm |
| Kiểu lắp đặt | Surface mount |
| Architecture | AVR enhanced RISC, single-cycle instruction execution |
| Program Memory Type | Self-programming Flash with Read-While-Write |
| Ordering Code | ATXMEGA64A3U-MH |
Hướng dẫn cấu hình chân ATXMEGA64A3U-MH 64-qfn, 9 x 9 mm
Cấu hình chân cho ATXMEGA64A3U-MH (64-qfn, 9 x 9 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATXMEGA64A3U-MH.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATXMEGA64A3U-MH phù hợp cho 6 Áp dụngs: Industrial Sensor and Condition Monitoring, Building Automation Controller, Low-Power Data Logger, Serial Communication Gateway, LED Lighting and Dimming Controller, Embedded Control and Motor Interface Hub.
Industrial Sensor and Condition Monitoring
The ATXMEGA64A3U-MH fits industrial sensor nodes that periodically acquire measurements, filter data, and transmit results through a serial link. Its 64 KB Flash provides room for application code, protocol stacks, and field-updatable logic, while 4 KB SRAM supports buffering between acquisition and communication tasks. The four-channel DMA controller can move sampled data without requiring every byte to pass through CPU polling, and the eight-channel event system can coordinate timers, analog events, and communications. At 32 MHz, the device provides up to 32 MIPS throughput while retaining the deterministic behavior expected from an 8/16-bit embedded controller.
Được đề xuất
Building Automation Controller
The ATXMEGA64A3U-MH is appropriate for building-automation modules that coordinate sensors, actuators, and serial field devices. Seven USARTs allow multiple equipment links to coexist, while the seven 16-bit timer/counters support timing, sampling, and motor-control functions without requiring separate timer ICs. The event system can route peripheral events directly and reduce central processor intervention. With 64 KB Flash, the controller can hold networking logic, device configuration, diagnostics, and update routines in one package, making it useful for compact gateways that must manage several low-speed industrial interfaces.
Được đề xuất
Low-Power Data Logger
The ATXMEGA64A3U-MH can serve as the central controller in a low-power data logger that stores sensor readings and configuration data locally. Its 2 KB EEPROM preserves calibration parameters and counters when the main supply is removed, while 4 KB SRAM accommodates working buffers and protocol frames. DMA supports efficient transfers between peripherals and memory, and the event system helps organize timed acquisition without polling every peripheral. The 32 MHz clock also permits local computation, filtering, and formatting, reducing the amount of data transmitted to a remote host.
Được đề xuất
Serial Communication Gateway
The ATXMEGA64A3U-MH is well suited to a serial gateway because it integrates seven USARTs and two TWI interfaces on a single low-power MCU. The gateway can translate between multiple device protocols, validate incoming frames, and route data using interrupt-driven firmware without dedicating a CPU to busy waiting. Its 64 KB Flash accommodates protocol state machines and interface-specific handlers, while DMA can improve buffer movement for high-throughput links. The deterministic event and interrupt architecture also helps maintain predictable response times across several simultaneous communication channels.
Được đề xuất
LED Lighting and Dimming Controller
The ATXMEGA64A3U-MH can coordinate multi-channel LED lighting where precise timing and programmable PWM outputs are important. Its seven flexible 16-bit timer/counters include compare and PWM functions, enabling deterministic dimming patterns and reduced flicker. The event system can synchronize timer activity with serial lighting commands, while DMA supports efficient transfer of display or animation data. At 32 MHz, the controller can manage status indication, effect sequencing, and communications in a compact embedded design without requiring a separate timing IC.
Được đề xuất
Embedded Control and Motor Interface Hub
The ATXMEGA64A3U-MH suits embedded control hubs requiring deterministic timers, PWM generation, and multiple serial-managed sensors. Seven 16-bit timer/counters can handle capture, compare, and motor-control timing, while the event system connects those timers to communication and DMA resources. The 32 MHz core supplies up to 32 MIPS for control loops and supervisory logic, and 4 KB SRAM allows buffers for motion commands and status. Designers should verify each peripheral’s pin mux and alternate-function requirements against the 64-QFN pinout before assigning motor-control outputs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATXMEGA64A3U-MH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATXMEGA64A3U-AU | ATXMEGA64A3U-AUR | ATXMEGA64A3U-ANR | ATXMEGA64A3U-MNR |
|---|---|---|---|---|---|
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| General-Purpose I/O | Up to 50 lines | Up to 50 lines | Up to 50 lines | Up to 50 lines | Up to 50 lines |
| Timer/Counters | 7 flexible 16-bit timer/counters | 7 flexible 16-bit timer/counters | 7 flexible 16-bit timer/counters | 7 flexible 16-bit timer/counters | 7 flexible 16-bit timer/counters |
| USART Interfaces | 7 | 7 | 7 | 7 | 7 |
| TWI Interfaces | 2 | 2 | 2 | 2 | 2 |
Bảo phân biệt quan trọng
- Substantially larger memory configuration than entry-level AVR devices (vsATMEGA329A-MU)
- Hardware DMA reduces processor involvement in peripheral transfers (vsATXMEGA32D4-AUR)
- Extensive event-routing and real-time peripheral integration (vsATXMEGA64A3U-AU)
Ghi chú thiết kế
The 64-QFN exposed pad is part of the device’s electrical and thermal design. Follow the manufacturer package drawing for exposed-pad dimensions, solder-mask clearance, and recommended via arrangement. Place thermal vias within the pad’s permitted region and maintain adequate copper area so heat from sustained 32 MHz operation and enabled peripherals can leave the junction through the intended path rather than through a localized hot spot.
Place input and bulk decoupling capacitors close to the device power pins, and connect each decoupling capacitor directly to the appropriate ground plane with a short return path. Route the clock and high-speed communication signals away from noisy switching nodes, and preserve the ground reference beneath the QFN body wherever the board stack-up permits. Verify all peripheral multiplexing against the exact 64-QFN pin table before fixing the PCB footprint.
Estimate average power consumption from clock activity, active current, sleep current, and the time spent in each operating state rather than using active current alone. The 32 MHz core can increase dynamic demand relative to a lower-frequency design, while peripherals left enabled may prevent the MCU from reaching its lowest-power state. Configure unused modules and I/O pins according to the manufacturer guidelines, and size the regulator for both transient load steps and the required local decoupling.
Use the manufacturer’s recommended clock layout and keep the clock path short, continuous, and away from high-edge-rate serial or switching signals. If external communication rates approach the limits of the PCB or interface, inspect edge rates, return paths, and grounding rather than relying only on nominal baud rate. Series damping or other interface-specific conditioning should be calculated from actual edge rates and trace geometry rather than added indiscriminately.
Thông tin tuân thủ
No explicit environmental or material-compliance declaration for this exact ordering code was identified in the accessible technical information. AEC-Q100 is not applicable to this general-purpose industrial microcontroller unless a separate automotive-qualified ordering code is selected.