ATXMEGA64A3U-MH - 32MHz 64KB AVR Microcontroller | Microchip
MPN: ATXMEGA64A3U-MH ✓ 啟用中ATXMEGA64A3U-MH 概覽
An 8/16-bit microcontroller is a semiconductor device that executes embedded software from nonvolatile Flash while using SRAM for working data and EEPROM for parameters that must retain their values when power is removed. The ATXMEGA A3 family combines a microcontroller core, timers, communication interfaces, analog peripherals, and general-purpose I/O in one device, supporting industrial, communications, control, and data-acquisition designs.
The device provides 64 KB of self-programming Flash with Read-While-Write capability, including a 4 KB boot-code section, alongside 4 KB of SRAM and 2 KB of EEPROM. Its four-channel DMA controller transfers data without continuous CPU intervention, while the eight-channel event system links peripherals for deterministic event routing. The family also includes up to 50 general-purpose I/O lines.
At 32 MHz, the AVR enhanced RISC architecture can reach approximately 1 MIPS per MHz and up to 32 MIPS of throughput. Seven flexible 16-bit timer/counters provide compare and PWM functions, and the family includes seven USARTs, two TWI interfaces, and a 16-bit real-time counter. These integrated resources reduce the need for external timers, serial transceivers, and data-movement circuitry.
Typical applications include industrial monitoring, connected sensor nodes, building automation, low-power serial controllers, embedded data loggers, and compact control platforms. The combination of DMA, event-system routing, multiple serial interfaces, and 32-bit processing performance is especially useful when several peripheral operations must coexist under a deterministic embedded software architecture.
PCB design should preserve the exposed-pad land pattern and thermal-via requirements specified by the manufacturer for the 64-QFN package. Power, decoupling, clock, and programming nets should follow the datasheet reference layout, while unused I/O pins should be configured according to the device’s reset and input-buffer guidelines.
This page combines the manufacturer device specifications, package identification, family-level peripheral details, sourcing information, and application-oriented engineering guidance to support component selection and board-level implementation.
直接替換替代品,適用於 ATXMEGA64A3U-MH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATXMEGA64A3U-MH (相同外形與佔位) — 差異在於 Maximum Throughput, Package.
ATXMEGA64A3U-AU
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA64A3U-AUR
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA64A3U-ANR
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA64A3U-MNR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ATXMEGA64A3U-MH 最大額定值與電氣特性
| Product Type | 8/16-bit AVR XMEGA A3U microcontroller |
| 最大時脈頻率 | 32 MHz |
| Maximum Throughput | 32 MIPS at 32 MHz |
| Flash Memory | 64 KB (32K x 16) |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 2 KB |
| DMA Channels | 4 channels |
| Event System Channels | 8 channels |
| General-Purpose I/O | Up to 50 lines |
| Timer/Counters | 7 flexible 16-bit timer/counters |
| Real-Time Counter | 16-bit |
| USART Interfaces | 7 |
| TWI Interfaces | 2 |
| 封裝 | 64-QFN, 9 x 9 mm |
| 安裝類型 | Surface mount |
| Architecture | AVR enhanced RISC, single-cycle instruction execution |
| Program Memory Type | Self-programming Flash with Read-While-Write |
| Ordering Code | ATXMEGA64A3U-MH |
ATXMEGA64A3U-MH 64-qfn, 9 x 9 mm 腳位配置指南
ATXMEGA64A3U-MH(64-qfn, 9 x 9 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATXMEGA64A3U-MH.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATXMEGA64A3U-MH 適用於 6 應用s: Industrial Sensor and Condition Monitoring, Building Automation Controller, Low-Power Data Logger, Serial Communication Gateway, LED Lighting and Dimming Controller, Embedded Control and Motor Interface Hub.
Industrial Sensor and Condition Monitoring
The ATXMEGA64A3U-MH fits industrial sensor nodes that periodically acquire measurements, filter data, and transmit results through a serial link. Its 64 KB Flash provides room for application code, protocol stacks, and field-updatable logic, while 4 KB SRAM supports buffering between acquisition and communication tasks. The four-channel DMA controller can move sampled data without requiring every byte to pass through CPU polling, and the eight-channel event system can coordinate timers, analog events, and communications. At 32 MHz, the device provides up to 32 MIPS throughput while retaining the deterministic behavior expected from an 8/16-bit embedded controller.
推薦
Building Automation Controller
The ATXMEGA64A3U-MH is appropriate for building-automation modules that coordinate sensors, actuators, and serial field devices. Seven USARTs allow multiple equipment links to coexist, while the seven 16-bit timer/counters support timing, sampling, and motor-control functions without requiring separate timer ICs. The event system can route peripheral events directly and reduce central processor intervention. With 64 KB Flash, the controller can hold networking logic, device configuration, diagnostics, and update routines in one package, making it useful for compact gateways that must manage several low-speed industrial interfaces.
推薦
Low-Power Data Logger
The ATXMEGA64A3U-MH can serve as the central controller in a low-power data logger that stores sensor readings and configuration data locally. Its 2 KB EEPROM preserves calibration parameters and counters when the main supply is removed, while 4 KB SRAM accommodates working buffers and protocol frames. DMA supports efficient transfers between peripherals and memory, and the event system helps organize timed acquisition without polling every peripheral. The 32 MHz clock also permits local computation, filtering, and formatting, reducing the amount of data transmitted to a remote host.
推薦
Serial Communication Gateway
The ATXMEGA64A3U-MH is well suited to a serial gateway because it integrates seven USARTs and two TWI interfaces on a single low-power MCU. The gateway can translate between multiple device protocols, validate incoming frames, and route data using interrupt-driven firmware without dedicating a CPU to busy waiting. Its 64 KB Flash accommodates protocol state machines and interface-specific handlers, while DMA can improve buffer movement for high-throughput links. The deterministic event and interrupt architecture also helps maintain predictable response times across several simultaneous communication channels.
推薦
LED Lighting and Dimming Controller
The ATXMEGA64A3U-MH can coordinate multi-channel LED lighting where precise timing and programmable PWM outputs are important. Its seven flexible 16-bit timer/counters include compare and PWM functions, enabling deterministic dimming patterns and reduced flicker. The event system can synchronize timer activity with serial lighting commands, while DMA supports efficient transfer of display or animation data. At 32 MHz, the controller can manage status indication, effect sequencing, and communications in a compact embedded design without requiring a separate timing IC.
推薦
Embedded Control and Motor Interface Hub
The ATXMEGA64A3U-MH suits embedded control hubs requiring deterministic timers, PWM generation, and multiple serial-managed sensors. Seven 16-bit timer/counters can handle capture, compare, and motor-control timing, while the event system connects those timers to communication and DMA resources. The 32 MHz core supplies up to 32 MIPS for control loops and supervisory logic, and 4 KB SRAM allows buffers for motion commands and status. Designers should verify each peripheral’s pin mux and alternate-function requirements against the 64-QFN pinout before assigning motor-control outputs.
推薦
推薦產品摘要
工程參考資料,適用於 ATXMEGA64A3U-MH — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATXMEGA64A3U-AU | ATXMEGA64A3U-AUR | ATXMEGA64A3U-ANR | ATXMEGA64A3U-MNR |
|---|---|---|---|---|---|
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| General-Purpose I/O | Up to 50 lines | Up to 50 lines | Up to 50 lines | Up to 50 lines | Up to 50 lines |
| Timer/Counters | 7 flexible 16-bit timer/counters | 7 flexible 16-bit timer/counters | 7 flexible 16-bit timer/counters | 7 flexible 16-bit timer/counters | 7 flexible 16-bit timer/counters |
| USART Interfaces | 7 | 7 | 7 | 7 | 7 |
| TWI Interfaces | 2 | 2 | 2 | 2 | 2 |
主要差異化特點
- Substantially larger memory configuration than entry-level AVR devices (對比ATMEGA329A-MU)
- Hardware DMA reduces processor involvement in peripheral transfers (對比ATXMEGA32D4-AUR)
- Extensive event-routing and real-time peripheral integration (對比ATXMEGA64A3U-AU)
設計說明
The 64-QFN exposed pad is part of the device’s electrical and thermal design. Follow the manufacturer package drawing for exposed-pad dimensions, solder-mask clearance, and recommended via arrangement. Place thermal vias within the pad’s permitted region and maintain adequate copper area so heat from sustained 32 MHz operation and enabled peripherals can leave the junction through the intended path rather than through a localized hot spot.
Place input and bulk decoupling capacitors close to the device power pins, and connect each decoupling capacitor directly to the appropriate ground plane with a short return path. Route the clock and high-speed communication signals away from noisy switching nodes, and preserve the ground reference beneath the QFN body wherever the board stack-up permits. Verify all peripheral multiplexing against the exact 64-QFN pin table before fixing the PCB footprint.
Estimate average power consumption from clock activity, active current, sleep current, and the time spent in each operating state rather than using active current alone. The 32 MHz core can increase dynamic demand relative to a lower-frequency design, while peripherals left enabled may prevent the MCU from reaching its lowest-power state. Configure unused modules and I/O pins according to the manufacturer guidelines, and size the regulator for both transient load steps and the required local decoupling.
Use the manufacturer’s recommended clock layout and keep the clock path short, continuous, and away from high-edge-rate serial or switching signals. If external communication rates approach the limits of the PCB or interface, inspect edge rates, return paths, and grounding rather than relying only on nominal baud rate. Series damping or other interface-specific conditioning should be calculated from actual edge rates and trace geometry rather than added indiscriminately.
合規資訊
No explicit environmental or material-compliance declaration for this exact ordering code was identified in the accessible technical information. AEC-Q100 is not applicable to this general-purpose industrial microcontroller unless a separate automotive-qualified ordering code is selected.