BCM5482A2KFB - Dual-Port Gigabit Ethernet PHY | Broadcom
MPN: BCM5482A2KFB ✓ Hoạt độngBCM5482A2KFB Tóm tắt
An Ethernet PHY is a physical-layer transceiver that converts digital MAC data into electrical signals suitable for transmission over twisted-pair cabling, while recovering signals from a received waveform. The BCM5482A2KFB belongs to the Ethernet transceiver hierarchy: Ethernet PHY, network interface IC, interface IC, and semiconductor. Its dual-port architecture allows one device to serve two copper Ethernet connections, reducing component count in routers, switches, gateways, and embedded network appliances compared with separate single-port PHYs.
The device supports 10BASE-T, 100BASE-T, and 1000BASE-T operation according to its product classification and Broadcom technical documentation. RGMII provides a parallel MAC-to-PHY data path, SGMII provides a serial gigabit-class path, and SerDes offers a reduced-width serial interface. The Broadcom documentation also identifies adjustable RGMII clock timing as a system-integration feature intended to compensate for printed-circuit-board trace delays without requiring the external delay compensation specified by the RGMII interface.
The BCM5482 uses a DSP-based architecture with advanced power-management techniques for operation over existing Category 5 twisted-pair wiring. Broadcom states that the architecture complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab, providing support for 10 Mb/s, 100 Mb/s, and 1000BASE-T operation. These standards correspond to the three Ethernet rates identified for the BCM5482 family.
Typical applications include multi-port routers, Ethernet switches, network appliances, digital video equipment, industrial Ethernet controllers, and embedded systems requiring two Gigabit Ethernet physical interfaces. The RGMII option is useful when the host MAC expects a parallel interface, while SGMII and SerDes can reduce PCB routing demands in high-speed designs. Interface selection should account for MAC timing, clock architecture, trace length, and signal-integrity requirements.
Designers should follow the Broadcom BCM5482 datasheet for the complete ball map, recommended magnetic component, termination network, decoupling, and reference-layout details. The 121-ball footprint requires careful escape routing, and the copper medium requires an appropriate Ethernet magnetics implementation. Maintain the specified power and ground distribution because high-speed digital interfaces can couple return-path noise into adjacent circuits.
This page consolidates the verified BCM5482A2KFB interface, package, rate, and environmental details with drop-in replacement guidance, comparison parameters, and application-focused design guidance. It also separates confirmed device characteristics from parameters that require confirmation against the manufacturer datasheet before schematic release or layout commitment.
Bộ thay thế dễ dàng lắp đặt cho BCM5482A2KFB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với BCM5482A2KFB (cùng hình factor và footprint) — khác nhau ở Package, Product Type.
BCM5482A2KFBG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →BCM5482A2KFB Tỷ lệ tối đa & tính chất điện
| Product Type | Dual-port Ethernet physical-layer transceiver |
| Supported Ethernet Rates | 10 Mb/s, 100 Mb/s, and 1 Gb/s |
| Copper Ethernet Standards | IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab |
| MAC Interfaces | RGMII, SGMII, and serial SerDes |
| Port Count | 2 ports |
| Architecture | DSP-based Ethernet PHY |
| Hộp | 121-pin BGA |
| Package Technology | Ball grid array |
| Khoảng nhiệt độ hoạt động | -40 °C to +105 °C ambient |
| Supported Twisted-Pair Category | Category 5 |
| RGMII Clock Adjustment | Adjustable |
| SerDes Interface Pin Count | 4 pins |
| SGMII Interface Pin Count | 6 pins |
| RGMII Interface Pin Count | 12 pins |
Hướng dẫn cấu hình chân BCM5482A2KFB ball grid array
Cấu hình chân cho BCM5482A2KFB (ball grid array gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho BCM5482A2KFB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
BCM5482A2KFB phù hợp cho 6 Áp dụngs: Dual-Port Network Routers, Managed Ethernet Switches, Industrial Gateway Controllers, Network Appliance Front Panels, Digital Video Network Equipment, Embedded Ethernet Connected Equipment.
Dual-Port Network Routers
BCM5482A2KFB fits routers that need two copper Ethernet ports from one PHY device. Its support for 10 Mb/s, 100 Mb/s, and 1 Gb/s allows each port to negotiate across legacy and Gigabit links, while RGMII, SGMII, or SerDes provides flexibility for the host MAC. The 121-pin BGA requires careful escape routing, and the board also needs suitable Ethernet magnetics. Compared with two discrete single-port PHYs, the dual-port arrangement can simplify component inventory and shared power distribution, although both ports must be validated under worst-case traffic and thermal conditions.
Được đề xuất
Managed Ethernet Switches
The BCM5482A2KFB can provide two physical-layer channels in a managed switch line card where board area and component count are important. Its 1 Gb/s copper capability supports Gigabit uplinks and access ports, while the reduced-pin-count RGMII, SGMII, and SerDes options can align with different switch-ASIC interfaces. Broadcom identifies adjustable RGMII clock timing as a way to account for PCB trace delay. Deployment still requires channel-by-channel validation of MAC timing, magnetics behavior, thermal performance, and cable compatibility under sustained traffic.
Được đề xuất
Industrial Gateway Controllers
BCM5482A2KFB is appropriate for industrial gateways that bridge local equipment through two Ethernet ports. Its -40 °C to +105 °C ambient operating range supports use across industrial temperature conditions, while 10/100/1000 Mb/s compatibility allows connection to both legacy and Gigabit infrastructure. The RGMII interface can serve a parallel MAC, whereas SGMII or SerDes can reduce high-speed routing demands. Designers should verify power-loss behavior, isolation strategy, surge protection, grounding, and enclosure thermal performance as part of the complete industrial design.
Được đề xuất
Network Appliance Front Panels
The BCM5482A2KFB can implement two copper network connections in a gateway appliance, storage interface, or secure network appliance. Its DSP-based architecture is designed for low-power operation over existing Category 5 twisted-pair wiring, while the 121-pin BGA keeps the PHY footprint compact. Interface selection should be driven by the host processor's MAC and available PCB area. Validate magnetics isolation, auto-negotiation behavior, error counters, and link performance across the full temperature range before production release.
Được đề xuất
Digital Video Network Equipment
BCM5482A2KFB suits digital video systems that need two network links for primary and secondary connectivity. Support for 1 Gb/s provides bandwidth for high-resolution video traffic, while 10 and 100 Mb/s compatibility supports lower-rate links and legacy equipment. The SerDes option can offer a compact connection to a capable video processor, whereas RGMII may suit a parallel MAC. System validation should cover sustained bitrate, packet timing, thermal rise in the BGA region, and the chosen Ethernet magnetic-component implementation.
Được đề xuất
Embedded Ethernet Connected Equipment
BCM5482A2KFB can add two copper Ethernet ports to embedded controllers, test systems, and automation equipment without using separate PHYs for each link. The available RGMII, SGMII, and SerDes interfaces let the designer optimize host connectivity and board routing rather than adopting a fixed parallel interface. Broadcom's adjustable RGMII timing can help compensate for actual PCB delay. Before schematic closure, confirm that the host MAC timing, magnetics, PHY clocking, reset strategy, and firmware configuration are compatible with the selected operating mode.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho BCM5482A2KFB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | BCM5482A2KFBG |
|---|---|---|
| Package | 121-pin BGA | 121-pin BGA |
| Brand | Broadcom | Broadcom |
| Port Count | 2 ports | 2 ports |
Bảo phân biệt quan trọng
- Two copper Ethernet ports in one device (vsBCM5482A2KFBG)
- Three MAC-interface choices (vsBCM5482A2KFBG)
- Broad copper-rate and environmental coverage (vsBCM5482A2KFBG)
Ghi chú thiết kế
Use the complete 121-ball assignment and reference layout from the Broadcom BCM5482 datasheet before routing the PCB. A 121-pin BGA requires short, controlled escape paths for RGMII, SGMII, or SerDes signals, and the selected interface determines which traces are critical. Keep clock distribution symmetrical, provide a continuous ground reference, and avoid switching or high-current paths beneath sensitive signal escapes.
Treat the MAC interface and copper-channel implementation as one timing system. Broadcom identifies adjustable RGMII clock timing for compensating PCB trace delay, but the adjustment range and required settings depend on the actual host MAC, clocks, board routing, and magnetics. Validate eye quality, skew, and link margins at the intended operating conditions rather than relying on a nominal reference configuration.
Do not infer that equal package pin counts guarantee a safe replacement. Confirm the BCM5482A2KFBG ordering details, datasheet revision, register behavior, electrical limits, configuration method, and qualification status with Broadcom before substituting it. The two-port design also requires independent validation of both channels, including auto-negotiation, error recovery, isolation components, and cable faults.
Thông tin tuân thủ
No explicit lifecycle or environmental-compliance statements were identified in the verified component results. The -40 °C to +105 °C ambient rating describes operating temperature, not automotive qualification.