Broadcom

BCM5482A2KFB - Dual-Port Gigabit Ethernet PHY | Broadcom

MPN: BCM5482A2KFB ✓ Aktif
IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab Rds(on) 121-pin BGA Package Adjustable Speed
MOQ: 1 |

BCM5482A2KFB Genel Bakış

Broadcom BCM5482A2KFB is a dual-port 10/100/1000BASE-T Ethernet physical-layer transceiver with integrated SerDes support, supplied in a 121-pin BGA package. The device supports 10 Mb/s, 100 Mb/s, and 1 Gb/s Ethernet operation and is intended for network-interface equipment requiring copper connectivity. According to the Broadcom BCM5482 documentation, the PHY supports RGMII, SGMII, and serial SerDes MAC interfaces. These reduced-pin-count interfaces offer alternatives to the full GMII and can simplify system integration while reducing board-level interconnect requirements.

An Ethernet PHY is a physical-layer transceiver that converts digital MAC data into electrical signals suitable for transmission over twisted-pair cabling, while recovering signals from a received waveform. The BCM5482A2KFB belongs to the Ethernet transceiver hierarchy: Ethernet PHY, network interface IC, interface IC, and semiconductor. Its dual-port architecture allows one device to serve two copper Ethernet connections, reducing component count in routers, switches, gateways, and embedded network appliances compared with separate single-port PHYs.

The device supports 10BASE-T, 100BASE-T, and 1000BASE-T operation according to its product classification and Broadcom technical documentation. RGMII provides a parallel MAC-to-PHY data path, SGMII provides a serial gigabit-class path, and SerDes offers a reduced-width serial interface. The Broadcom documentation also identifies adjustable RGMII clock timing as a system-integration feature intended to compensate for printed-circuit-board trace delays without requiring the external delay compensation specified by the RGMII interface.

The BCM5482 uses a DSP-based architecture with advanced power-management techniques for operation over existing Category 5 twisted-pair wiring. Broadcom states that the architecture complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab, providing support for 10 Mb/s, 100 Mb/s, and 1000BASE-T operation. These standards correspond to the three Ethernet rates identified for the BCM5482 family.

Typical applications include multi-port routers, Ethernet switches, network appliances, digital video equipment, industrial Ethernet controllers, and embedded systems requiring two Gigabit Ethernet physical interfaces. The RGMII option is useful when the host MAC expects a parallel interface, while SGMII and SerDes can reduce PCB routing demands in high-speed designs. Interface selection should account for MAC timing, clock architecture, trace length, and signal-integrity requirements.

Designers should follow the Broadcom BCM5482 datasheet for the complete ball map, recommended magnetic component, termination network, decoupling, and reference-layout details. The 121-ball footprint requires careful escape routing, and the copper medium requires an appropriate Ethernet magnetics implementation. Maintain the specified power and ground distribution because high-speed digital interfaces can couple return-path noise into adjacent circuits.

This page consolidates the verified BCM5482A2KFB interface, package, rate, and environmental details with drop-in replacement guidance, comparison parameters, and application-focused design guidance. It also separates confirmed device characteristics from parameters that require confirmation against the manufacturer datasheet before schematic release or layout commitment.

Drop-in alternatifler için BCM5482A2KFB — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller BCM5482A2KFB (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type.

Broadcom
Package: 121-BGA
Product Type: Dual-port Ethernet transceiver
İle Karşılaştır BCM5482A2KFB →

BCM5482A2KFBG

✅ Yerleştirme
Broadcom
📦 121-pin BGA
Dual-port Ethernet transceiver · 10 Mb/s, 100 Mb/s, 1 Gb/s · 2 ports · Full duplex and half duplex · 10/100/1000BASE-T · CMOS · 121-BGA · 121 balls

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

BCM5482A2KFB Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Dual-port Ethernet physical-layer transceiver
Supported Ethernet Rates 10 Mb/s, 100 Mb/s, and 1 Gb/s
Copper Ethernet Standards IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab
MAC Interfaces RGMII, SGMII, and serial SerDes
Port Count 2 ports
Architecture DSP-based Ethernet PHY
Paket 121-pin BGA
Package Technology Ball grid array
İşletim Sıcaklığı Aralığı -40 °C to +105 °C ambient
Supported Twisted-Pair Category Category 5
RGMII Clock Adjustment Adjustable
SerDes Interface Pin Count 4 pins
SGMII Interface Pin Count 6 pins
RGMII Interface Pin Count 12 pins

BCM5482A2KFB ball grid array Pin Yapısı Kılavuzu

BCM5482A2KFB (ball grid array paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

ball grid array paket pin çizelgesi için BCM5482A2KFB

Ayrıntılı pin çıkış verisi mevcut değil: BCM5482A2KFB.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

BCM5482A2KFB için uygundur 6 uygulamas: Dual-Port Network Routers, Managed Ethernet Switches, Industrial Gateway Controllers, Network Appliance Front Panels, Digital Video Network Equipment, Embedded Ethernet Connected Equipment.

🌐

Dual-Port Network Routers

BCM5482A2KFB fits routers that need two copper Ethernet ports from one PHY device. Its support for 10 Mb/s, 100 Mb/s, and 1 Gb/s allows each port to negotiate across legacy and Gigabit links, while RGMII, SGMII, or SerDes provides flexibility for the host MAC. The 121-pin BGA requires careful escape routing, and the board also needs suitable Ethernet magnetics. Compared with two discrete single-port PHYs, the dual-port arrangement can simplify component inventory and shared power distribution, although both ports must be validated under worst-case traffic and thermal conditions.

🌐

Managed Ethernet Switches

The BCM5482A2KFB can provide two physical-layer channels in a managed switch line card where board area and component count are important. Its 1 Gb/s copper capability supports Gigabit uplinks and access ports, while the reduced-pin-count RGMII, SGMII, and SerDes options can align with different switch-ASIC interfaces. Broadcom identifies adjustable RGMII clock timing as a way to account for PCB trace delay. Deployment still requires channel-by-channel validation of MAC timing, magnetics behavior, thermal performance, and cable compatibility under sustained traffic.

🏭

Industrial Gateway Controllers

BCM5482A2KFB is appropriate for industrial gateways that bridge local equipment through two Ethernet ports. Its -40 °C to +105 °C ambient operating range supports use across industrial temperature conditions, while 10/100/1000 Mb/s compatibility allows connection to both legacy and Gigabit infrastructure. The RGMII interface can serve a parallel MAC, whereas SGMII or SerDes can reduce high-speed routing demands. Designers should verify power-loss behavior, isolation strategy, surge protection, grounding, and enclosure thermal performance as part of the complete industrial design.

🖥️

Network Appliance Front Panels

The BCM5482A2KFB can implement two copper network connections in a gateway appliance, storage interface, or secure network appliance. Its DSP-based architecture is designed for low-power operation over existing Category 5 twisted-pair wiring, while the 121-pin BGA keeps the PHY footprint compact. Interface selection should be driven by the host processor's MAC and available PCB area. Validate magnetics isolation, auto-negotiation behavior, error counters, and link performance across the full temperature range before production release.

📺

Digital Video Network Equipment

BCM5482A2KFB suits digital video systems that need two network links for primary and secondary connectivity. Support for 1 Gb/s provides bandwidth for high-resolution video traffic, while 10 and 100 Mb/s compatibility supports lower-rate links and legacy equipment. The SerDes option can offer a compact connection to a capable video processor, whereas RGMII may suit a parallel MAC. System validation should cover sustained bitrate, packet timing, thermal rise in the BGA region, and the chosen Ethernet magnetic-component implementation.

🧩

Embedded Ethernet Connected Equipment

BCM5482A2KFB can add two copper Ethernet ports to embedded controllers, test systems, and automation equipment without using separate PHYs for each link. The available RGMII, SGMII, and SerDes interfaces let the designer optimize host connectivity and board routing rather than adopting a fixed parallel interface. Broadcom's adjustable RGMII timing can help compensate for actual PCB delay. Before schematic closure, confirm that the host MAC timing, magnetics, PHY clocking, reset strategy, and firmware configuration are compatible with the selected operating mode.

What is BCM5482A2KFB?
BCM5482A2KFB is a Broadcom dual-port Ethernet PHY transceiver supporting 10 Mb/s, 100 Mb/s, and 1 Gb/s operation over twisted-pair cabling. It combines two physical-layer ports with RGMII, SGMII, and serial SerDes MAC interfaces in a 121-pin BGA package. According to the Broadcom BCM5482 documentation, the DSP-based architecture is designed for robust, low-power operation over existing Category 5 wiring.
What Ethernet speeds does BCM5482A2KFB support?
BCM5482A2KFB supports 10 Mb/s, 100 Mb/s, and 1 Gb/s Ethernet rates. Broadcom identifies compliance with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab, covering the relevant 10BASE-T, 100BASE-T, and 1000BASE-T operation described for the BCM5482 family. Interface mode and copper-media configuration must be selected in the device configuration used by the host MAC and magnetics.
Which MAC interfaces are available on BCM5482A2KFB?
BCM5482A2KFB supports RGMII, SGMII, and serial SerDes MAC interfaces. According to the Broadcom BCM5482 documentation, these reduced-pin-count interfaces use 12, 6, and 4 pins respectively rather than the 25-pin full GMII arrangement. This interface flexibility lets a board designer match the PHY connection to the host MAC while potentially reducing connector and routing requirements.
Where can I download the BCM5482A2KFB datasheet PDF?
The BCM5482A2KFB datasheet is available through the Broadcom BCM5482 documentation page at docs.broadcom.com/doc/12358218, and the PDF also appears in the verified component-source results. Use the manufacturer document for the complete 121-ball map, electrical characteristics, register descriptions, reference layout, magnetics guidance, and operating limits before finalizing the hardware design.
Where can I find the BCM5482A2KFB pinout?
The BCM5482A2KFB uses a 121-pin BGA package, and its authoritative ball assignment must be taken from the pin-description table and package drawing in the Broadcom BCM5482 datasheet. No individual ball names are reproduced on this page because the verified technical excerpt does not contain the complete 121-pin map. Use the manufacturer document rather than a generic BGA footprint when assigning PCB nets.
Can BCM5482A2KFB operate over existing Category 5 cabling?
Yes, the BCM5482A2KFB is intended for operation over existing Category 5 twisted-pair wiring. Broadcom specifically identifies the BCM5482 architecture as supporting robust, low-power operation on Category 5 media and compliance with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab. Installation quality, cable length, termination, and the selected Ethernet magnetics still determine achievable field performance.
What can replace BCM5482A2KFB?
BCM5482A2KFBG is the verified same-footprint replacement candidate identified for BCM5482A2KFB. Both are Broadcom Ethernet transceiver variants associated with a 121-BGA package, and the cross-reference result describes the G variant as a full/half-duplex dual-port Ethernet transceiver. No verified cross-brand, pin-compatible replacement was established, so board changes or functional substitutions should not be assumed.
Is BCM5482A2KFBG a drop-in replacement for BCM5482A2KFB?
BCM5482A2KFBG is a candidate drop-in replacement because the verified listing identifies a 121-BGA package matching the BCM5482A2KFB package count. Pin-to-pin functionality, register compatibility, electrical limits, and configuration differences are not fully described in the retrieved listing. Confirm the complete Broadcom datasheet and device-revision details before treating the substitution as production-approved.
What is the best Broadcom equivalent for BCM5482A2KFB?
BCM5482A2KFBG is the best-supported Broadcom equivalent candidate for BCM5482A2KFB in the verified cross-reference results because it shares the dual-port Ethernet transceiver description and 121-BGA package format. The comparison is package-level rather than a complete functional equivalence statement. Review the Broadcom ordering guide, datasheet revision, configuration registers, and qualification status before substitution.
When should BCM5482A2KFB be chosen over a single-port Ethernet PHY?
BCM5482A2KFB is appropriate when one board needs two copper Ethernet physical interfaces and can use a shared 121-BGA footprint. A single-port PHY may be simpler for a one-port design, but it requires another device when the second port is added. Confirm that both ports use the selected RGMII, SGMII, or SerDes configuration and that the magnetics and layout budget can accommodate the dual-port implementation.
Is BCM5482A2KFB suitable for industrial network equipment?
BCM5482A2KFB is suitable for industrial network-equipment designs requiring dual Gigabit Ethernet copper ports and an extended ambient operating range of -40 °C to +105 °C. Broadcom states that the BCM5482 architecture supports IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab operation. Qualification of the finished equipment also depends on its enclosure, thermal design, surge protection, and applicable regulatory requirements.
Does BCM5482A2KFB support RGMII clock timing adjustment?
Yes, the BCM5482 supports adjustable RGMII clock timing. Broadcom describes this capability as a way to eliminate board trace delays required by the RGMII specification. The adjustment should be configured and validated against the actual host-MAC timing, PCB propagation delay, clock distribution, and magnetics network rather than copied from a generic reference design.
Where can I buy BCM5482A2KFB online?
Use the Request a Quote form on this XAIPART product page to request BCM5482A2KFB pricing, stock confirmation, and lead time for the exact BCM5482A2KFB ordering code. Current commercial terms can vary with quantity, packaging, and supply status, so the request form provides the appropriate channel for a transaction-ready quotation without relying on a stale listing price.
What is the price of BCM5482A2KFB?
The current BCM5482A2KFB quotation is handled through the Request a Quote form on this page. No fixed unit price is published because pricing can change with quantity, package format, and market availability. Submit the required quantity, target date, and delivery location with the request to receive a current commercial response.
What is the lead time and stock status for BCM5482A2KFB?
Current BCM5482A2KFB stock and lead time should be confirmed through the Request a Quote form on this page. The component is associated with an extended ambient rating of -40 °C to +105 °C, but environmental qualification does not by itself guarantee current inventory or a specific delivery date. Include the required quantity and target production date in the request.
What are the key specifications of BCM5482A2KFB that engineers should know?
The key BCM5482A2KFB specifications are dual-port operation, support for 10 Mb/s, 100 Mb/s, and 1 Gb/s rates, RGMII/SGMII/SerDes MAC interfaces, IEEE 802.3-family compliance, and a 121-pin BGA package. Broadcom also specifies an extended ambient range of -40 °C to +105 °C. These parameters determine MAC-interface choice, PCB complexity, thermal margin, and compatibility with existing Category 5 copper networks.

Mühendislik referans verileri: BCM5482A2KFB — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose BCM5482A2KFB when a design requires two copper Ethernet ports, operation from 10 Mb/s through 1 Gb/s, and a choice of RGMII, SGMII, or SerDes connectivity. It is particularly suitable for routers, managed switches, industrial gateways, and embedded network equipment using existing Category 5 wiring. Consider BCM5482A2KFBG only after confirming that its ordering code, configuration, electrical limits, register behavior, and qualification match the design; the matching 121-BGA package establishes footprint similarity but does not prove complete production equivalence. A different PHY may be appropriate when only one port is required, when the interface is outside RGMII/SGMII/SerDes, or when regulatory and lifecycle requirements differ. For any final substitution, verify the complete Broadcom datasheet, ball map, reference circuit, magnetics selection, PCB stack-up, and system-level link performance.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün BCM5482A2KFBG
Package 121-pin BGA 121-pin BGA
Brand Broadcom Broadcom
Port Count 2 ports 2 ports

Ana Farklılayıcılar

  • Two copper Ethernet ports in one device (karşılaştırma:BCM5482A2KFBG)
  • Three MAC-interface choices (karşılaştırma:BCM5482A2KFBG)
  • Broad copper-rate and environmental coverage (karşılaştırma:BCM5482A2KFBG)

Tasarım Notları

Use the complete 121-ball assignment and reference layout from the Broadcom BCM5482 datasheet before routing the PCB. A 121-pin BGA requires short, controlled escape paths for RGMII, SGMII, or SerDes signals, and the selected interface determines which traces are critical. Keep clock distribution symmetrical, provide a continuous ground reference, and avoid switching or high-current paths beneath sensitive signal escapes.

Treat the MAC interface and copper-channel implementation as one timing system. Broadcom identifies adjustable RGMII clock timing for compensating PCB trace delay, but the adjustment range and required settings depend on the actual host MAC, clocks, board routing, and magnetics. Validate eye quality, skew, and link margins at the intended operating conditions rather than relying on a nominal reference configuration.

Do not infer that equal package pin counts guarantee a safe replacement. Confirm the BCM5482A2KFBG ordering details, datasheet revision, register behavior, electrical limits, configuration method, and qualification status with Broadcom before substituting it. The two-port design also requires independent validation of both channels, including auto-negotiation, error recovery, isolation components, and cable faults.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No explicit lifecycle or environmental-compliance statements were identified in the verified component results. The -40 °C to +105 °C ambient rating describes operating temperature, not automotive qualification.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

BCM5482A2KFB datasheet BCM5482A2KFB specifications BCM5482A2KFB pinout BCM5482A2KFB datasheet pdf BCM5482A2KFB 121 pin BGA BCM5482A2KFB RGMII SGMII SerDes BCM5482A2KFB Ethernet PHY BCM5482A2KFB drop-in replacement BCM5482A2KFB equivalent Broadcom BCM5482A2KFB BCM5482A2KFB price BCM5482A2KFB stock BCM5482A2KFB vs BCM5482A2KFBG BCM5482A2KFB application circuit

İlgili Bileşenler ve Terimler

Broadcom BCM5482A2KFB BCM5482A2KFBG Ethernet PHY physical-layer transceiver network interface IC interface IC semiconductor 10BASE-T 100BASE-T 1000BASE-T RGMII SGMII SerDes GMII DSP-based architecture Category 5 twisted-pair wiring IEEE 802.3 IEEE 802.3u IEEE 802.3ab 121-pin BGA ball grid array RGMII clock timing Ethernet magnetics industrial Ethernet
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle