C8051F327-GM - 25MHz 16KB USB 8051 MCU | Silicon Labs
MPN: C8051F327-GM ✗ Cuối đờiC8051F327-GM Tóm tắt
An 8051 microcontroller is a general-purpose embedded processor based on the CISC architecture. The C8051F32x family adds contemporary USB connectivity, Flash memory, internal oscillators, and mixed-signal capabilities to the established 8051 instruction set. Within the product hierarchy, this device is an 8-bit microcontroller, an embedded processing IC, and a USB-capable embedded controller suitable for consumer, industrial, medical, and instrumentation products.
The C8051F327-GM combines a 25 MHz clock with 16 KB of Flash memory for firmware and configuration storage. Its integrated USB 2.0 controller includes an on-chip transceiver and clock-recovery function, reducing the need for separate USB interface circuitry. The device also incorporates an internal ±1.5% oscillator, an ADC, voltage reference, comparators, and a temperature sensor. These resources support designs that need local sensing, control, and USB communication without relying on several external devices.
The 5 x 5 mm QFN-28 package makes the MCU appropriate for space-constrained USB-connected products. Its exposed thermal pad provides a direct path for heat transfer into the PCB, while the low 2.7 V to 3.6 V operating range suits portable and USB-powered equipment. Designers should nevertheless evaluate USB signal routing, power-supply settling, and exposed-pad soldering carefully because compact packages can make manufacturing and rework more demanding than larger leaded packages.
Typical applications include USB-connected data loggers, portable measurement instruments, industrial control accessories, medical-device interfaces, and USB-to-serial or USB-to-digital peripheral products. The on-chip USB transceiver and clock recovery are particularly useful when board area is constrained. The 16 KB Flash capacity is appropriate for compact firmware, while the internal oscillator and analog peripherals can reduce external component requirements.
A critical design consideration is the exposed pad under the QFN package. Connect it to the ground plane using the manufacturer’s recommended land pattern, complete thermal-via placement before soldering, and verify that USB differential routing follows the recommended impedance and separation rules. Firmware development also requires a compatible 8051 toolchain and should account for the device-specific USB and memory organization in the manufacturer datasheet.
This product page organizes the C8051F327-GM specifications, USB-oriented use cases, package information, and engineering considerations into one concise engineering reference. It also identifies the verified lifecycle and sourcing information needed to evaluate the device for embedded USB designs.
Bộ thay thế dễ dàng lắp đặt cho C8051F327-GM — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với C8051F327-GM (cùng hình factor và footprint) — khác nhau ở Package, RoHS Status, USB Interface.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếC8051F327-GM Tỷ lệ tối đa & tính chất điện
| Microcontroller Type | 8-bit 8051 CISC MCU |
| Product Family | C8051F32x |
| Maximum CPU Clock Frequency | 25 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| Supply Voltage Range | 2.7 V to 3.6 V |
| USB Interface | USB 2.0 |
| USB Transceiver | Integrated |
| USB Clock Recovery | Integrated |
| ADC | Integrated |
| Voltage Reference | Integrated |
| Internal Oscillator Accuracy | ±1.5% |
| Temperature Sensor | Integrated |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| Hộp | 28-QFN, 5 x 5 mm |
| Exposed Pad | Yes |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
| Trạng thái vòng đời | NRND |
Hướng dẫn cấu hình chân C8051F327-GM 28-qfn, 5 x 5 mm
Cấu hình chân cho C8051F327-GM (28-qfn, 5 x 5 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho C8051F327-GM.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
C8051F327-GM phù hợp cho 6 Áp dụngs: USB Data Logger, Portable Measurement Instrument, USB-to-Serial Peripheral, Industrial Control Accessory, Medical Device Interface, Consumer USB Accessory.
USB Data Logger
The C8051F327-GM fits a compact USB data logger because it combines a 25 MHz 8051 core, 16 KB of Flash, and an integrated USB 2.0 controller with transceiver and clock recovery. The device can manage sampling control, local storage, and USB communication without requiring a separate USB interface controller. Its 2.7 V to 3.6 V operating range also suits USB-powered equipment, although the designer must verify worst-case bus current and configure the system for the required recording workload.
Được đề xuất
Portable Measurement Instrument
A portable measurement instrument can use the C8051F327-GM as both the control processor and USB interface because its ADC, voltage reference, internal oscillator, and USB 2.0 function controller are integrated on one device. The 25 MHz core supports local control functions, while 16 KB of Flash stores compact firmware and calibration logic. The 5 x 5 mm QFN-28 footprint preserves board area, although analog grounding and USB signal routing require deliberate PCB partitioning.
Được đề xuất
USB-to-Serial Peripheral
The C8051F327-GM is appropriate for a USB-to-serial bridge because the integrated USB transceiver eliminates a separate low-speed USB transceiver and its associated support circuitry. Firmware can implement the required serial protocol, buffering, and device enumeration within the 16 KB Flash limit while the 25 MHz processor handles USB and serial tasks. Designers should confirm the serial baud-rate, line-driver, connector, and isolation requirements of the target interface.
Được đề xuất
Industrial Control Accessory
An industrial USB control accessory can place configuration, diagnostics, and control commands on the C8051F327-GM. Its integrated ADC, voltage reference, temperature sensor, and ±1.5% internal oscillator provide useful local resources without requiring separate sensing or timing components. The 2.7 V to 3.6 V supply range supports compact embedded systems, while the -40°C to +85°C operating range covers many industrial environments when the complete assembly is also thermally qualified.
Được đề xuất
Medical Device Interface
The C8051F327-GM can serve as a low-speed USB interface and supervisory controller in a compact medical-device accessory. It combines USB communication with local control and monitoring functions in a 28-QFN package, reducing the component count around a primary processor. Its integrated ADC and temperature sensor support diagnostic monitoring, but the final medical product must independently validate signal accuracy, isolation, electrical safety, regulatory controls, and the applicable risk-management process.
Được đề xuất
Consumer USB Accessory
The C8051F327-GM is well suited to compact consumer USB accessories where device size, power, and USB connectivity are primary constraints. The 5 x 5 mm QFN-28 footprint accommodates the processor, USB transceiver, clock recovery, Flash, and selected analog resources in a small area. Firmware can implement enumeration and the accessory-specific protocol, while the 16 KB Flash limit should be checked against code size and future feature growth before layout approval.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho C8051F327-GM — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 28-QFN, 5 x 5 mm |
| Brand | Silicon Labs |
| CPU Architecture | 8-bit 8051 CISC |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 16 KB |
| Operating Voltage | 2.7 V to 3.6 V |
| USB Interface | USB 2.0 with integrated transceiver and clock recovery |
| Operating Temperature | -40°C to +85°C |
| Integrated Analog Resources | ADC, voltage reference, internal oscillator, and temperature sensor |
| Lifecycle Status | NRND |
Bảo phân biệt quan trọng
- Integrated USB connectivity reduces interface-component count (vsGeneric 8051 microcontroller without integrated USB)
- Compact package preserves board area (vsLarger leaded 8051 package)
- On-chip analog resources support compact standalone designs (vsMinimal 8051 controller with external sensing)
Ghi chú thiết kế
Implement the exposed pad as a ground connection using the manufacturer’s recommended QFN land pattern and thermal-via arrangement. The exposed pad is important for heat transfer from the MCU and for the package’s intended electrical return path. Control paste volume and reflow profile so the exposed pad voids do not prevent reliable solder-joint formation. Inspection should include the small perimeter joints as well as the center thermal area.
Route the USB differential pair as a controlled-impedance, tightly coupled pair with no plane splits, stubs, or unnecessary vias. Keep the pair away from switching nodes and high-current return paths, and follow the USB layout guidance in the manufacturer documentation. Place nearby decoupling and ESD-protection components so transient-current paths do not cross sensitive USB traces. Validate the final layer stack and trace geometry with the board fabricator.
Do not treat the 16 KB Flash capacity as unlimited application storage, and confirm that boot code, USB firmware, descriptors, update logic, and application code fit within the device’s Flash organization. Likewise, verify the exact meanings of supply, ground, oscillator, reset, programming, and USB pins in the manufacturer pin-description table before assigning alternate peripheral functions. NRND status should also be resolved through a documented migration or last-time-buy decision.
Thông tin tuân thủ
RoHS compliance is identified in the component listing. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.