C8051F385-GQ 50MHz 64KB Flash 32-LQFP 8051 MCU | Silicon Labs
MPN: C8051F385-GQ ✗ Cuối đờiC8051F385-GQ Tóm tắt
A microcontroller is an integrated circuit that combines a processor core, program memory, data memory and peripheral interfaces on one device. The 8051 architecture is a classic 8-bit embedded-control platform used in industrial equipment, consumer appliances, instrumentation, motor control and USB-enabled peripherals. The C8051F38x family extends that architecture with full-speed USB capability and a higher clock rate than many original 8051 devices.
The C8051F385-GQ is identified by the GQ ordering code and is packaged in a 32-pin LQFP. Distributor listings describe it as a 32-LQFP 7 x 7 mm device, while the Mouser listing identifies the same part as a 50 MHz, 64 kB 8-bit MCU. The exact flash organization is listed as 64K x 8, supporting the 8051 program-memory architecture. The -GQ suffix is associated with the standard commercial package configuration; confirm ordering details, temperature grade and production status against the manufacturer ordering information before release.
Typical design work involves assigning external crystals or clock sources, powering the on-chip USB and analog peripherals, connecting the 8051-compatible peripherals and programming the 64 kB flash region. Because the C8051F38x family is designed to be pin- and code-compatible with C8051F34x devices, it can also serve as an upgrade path for legacy C8051F34x designs where the electrical conditions and peripheral configuration are checked.
One important design consideration is that a 50 MHz clock rate does not by itself guarantee a 50 MHz peripheral or bus clock in every subsystem. Review the clock-tree configuration, USB timing requirements and flash-write timing in the manufacturer datasheet for the exact operating conditions. For USB designs, pay particular attention to decoupling, controlled-impedance routing and the required crystal or external clock arrangement.
This page consolidates distributor specifications, family compatibility information and drop-in alternatives for the C8051F385-GQ. It also provides application guidance, package-specific selection criteria and practical design notes to support PCB planning, firmware migration and sourcing decisions.
Bộ thay thế dễ dàng lắp đặt cho C8051F385-GQ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với C8051F385-GQ (cùng hình factor và footprint) — khác nhau ở Package, Flash Memory, Product Type, Operating Supply Voltage, Processor Core.
C8051F385-GQR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
C8051F385-GM
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
C8051F383-GQ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →C8051F380-GQ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →C8051F381-GM
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →C8051F385-GQ Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit microcontroller (MCU) |
| Architecture | 8051 |
| Product Family | C8051F38x |
| Tần số xung maksimum | 50 MHz |
| Performance Rating | 48 MIPS |
| Flash Memory | 64 kB (64K x 8) |
| Program Memory Type | Flash |
| Hộp | 32-LQFP (7 x 7 mm) |
| Kiểu lắp đặt | Surface mount |
| Core | 8051 core |
| USB Capability | Full Speed USB |
| Ordering Code | C8051F385-GQ |
Hướng dẫn cấu hình chân C8051F385-GQ 32-lqfp (7 x 7 mm)
Cấu hình chân cho C8051F385-GQ (32-lqfp (7 x 7 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho C8051F385-GQ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
C8051F385-GQ phù hợp cho 6 Áp dụngs: USB Human-Interface Devices, Industrial Control and Instrumentation, Consumer Appliance Controls, USB-to-Serial and Data Adapters, Programmable Control Boards, Legacy 8051 Product Migration.
USB Human-Interface Devices
The C8051F385-GQ suits USB keyboards, mice, game controllers and other human-interface peripherals because the C8051F38x family provides full-speed USB capability together with a 50 MHz 8051 core and 64 kB flash program memory. The 32-LQFP 7 x 7 mm package keeps the footprint compact for compact peripherals. Place the USB D+ and D- routes as a controlled-impedance differential pair, provide the recommended series resistance, and use the clock and decoupling arrangement specified in the family datasheet. Firmware can perform USB enumeration, HID report handling and device configuration within the 64K x 8 flash organization.
Được đề xuất
Industrial Control and Instrumentation
The 50 MHz, 48 MIPS C8051F385-GQ is appropriate for instrument-control boards that must sample inputs, operate control loops and manage multiple communications tasks while retaining 8051 code compatibility. Its 64 kB flash area can hold application firmware, calibration tables and a bootloader. The 32-LQFP package simplifies assembly in medium-density industrial designs, although pin multiplexing and available I/O must be checked for the specific peripheral set. Use the family datasheet for port-drive limits, analog functions and clock configuration before finalizing the control board.
Được đề xuất
Consumer Appliance Controls
The C8051F385-GQ can serve as the control processor in appliances, small motor controllers and user-interface subsystems that benefit from fast 8051 execution and dedicated flash storage. Its 48 MIPS listed performance supports responsive keypad scanning, display updates and state-machine control, while the 64 kB flash capacity accommodates application code and firmware updates. The compact 32-LQFP package is useful in space-constrained products, but the layout must respect the device power pins and USB or oscillator requirements when those functions are used.
Được đề xuất
USB-to-Serial and Data Adapters
For USB-to-serial, data-acquisition and configuration adapters, the C8051F385-GQ combines full-speed USB connectivity with a 50 MHz embedded core and 64 kB of flash. Firmware can handle USB enumeration, protocol conversion and configuration storage without an external processor. The device's 32-LQFP 7 x 7 mm package supports compact adapter designs, while its 8051 heritage simplifies migration from existing C8051F34x code. Validate the required UART resources, USB clock tolerance and connector protection against the device documentation before the PCB is released.
Được đề xuất
Programmable Control Boards
The C8051F385-GQ is a strong fit for educational, prototyping and programmable controller platforms that need a familiar 8051 software environment, USB connectivity and sufficient on-chip program memory. The 64 kB flash can store bootloader, application and configuration logic, while the 50 MHz clock supports responsive event handling. Use the standard 32-LQFP land pattern and expose programming and debug signals on the board so firmware can be updated. When designing around the C8051F38x family, follow the Silicon Labs programming and clock guidance to preserve reliable operation.
Được đề xuất
Legacy 8051 Product Migration
The C8051F385-GQ is useful when upgrading a C8051F34x-based design because Silicon Labs describes the C8051F38x family as pin- and code-compatible and states that it can function as a drop-in replacement in most applications. A migration can therefore reuse much of the application software while moving to a 50 MHz core, 64 kB flash and full-speed USB capability. Because “in most applications” still requires engineering review, verify the package, supply voltage, oscillator arrangement, port multiplex functions and any USB-related pin assignments before releasing the new board.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho C8051F385-GQ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | C8051F385-GQR | C8051F385-GM | C8051F383-GQ | C8051F380-GQ | C8051F381-GM |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) |
| Architecture | 8051 | 8051 | 8051 | 8051 | 8051 | 8051 |
| Product Family | C8051F38x | C8051F38x | C8051F38x | C8051F38x | C8051F38x | C8051F38x |
| Ordering Suffix | -GQ | -GQR | -GM | -GQ | -GQ | -GM |
Bảo phân biệt quan trọng
- Higher clock rate within the 8051 family (vsC8051F380-GQ)
- Full-speed USB integration (vsC8051F385-GQR)
- Automotive-grade option for harsher deployments (vsC8051F385-GQ)
- Direct 8051-family software continuity (vsC8051F383-GQ)
Ghi chú thiết kế
Route the USB D+ and D- conductors as a short, tightly coupled differential pair with continuous impedance, minimal stubs and no intervening test pads unless designed as impedance-compatible structures. Place the required USB series resistance close to the MCU pins and follow the Silicon Labs reference layout. Keep switching regulators, crystals and fast digital return currents away from the USB and analog reference areas to reduce radiated and conducted emissions.
Build the power distribution around the C8051F38x recommended pin and capacitor arrangement, including local high-frequency decoupling on every supply pin and adequate bulk capacitance near the device. Confirm the exact supply-voltage range and regulator configuration in the family datasheet before selecting external components. Estimated: total decoupling and loop area should be minimized rather than adding capacitance indiscriminately, because excessive loop inductance can degrade the supply transient response at the 50 MHz operating rate.
Preserve the C8051F38x clock-source layout exactly as documented, including the recommended crystal or oscillator topology, load components and guard geometry. A 50 MHz operating target does not permit arbitrary routing changes to the clock network. Validate startup, clock stability and USB clock tolerance across the full supply and temperature range, and keep programming and debug test points accessible without forcing long stubs onto active signal nets.
Do not treat family naming or a distributor listing as proof of drop-in compatibility. Compare package drawings, pin functions, supply voltage, clock requirements, peripheral availability, temperature grade and qualification. The C8051F38x family is intended to replace C8051F34x devices in most applications, but USB, oscillator and multiplexing differences can still require board or firmware changes. Record the exact ordering code and datasheet revision used for production release.
Thông tin tuân thủ
The C8051F385-GM sibling is described as AEC-Q100 qualified and tested, but that statement applies to the -GM ordering configuration and is not transferred to the -GQ part. RoHS, REACH, lead-free and conflict-minerals status for the C8051F385-GQ require confirmation from the manufacturer product documentation.