Harris Corporation

CD4020AF3 - 14-Bit CMOS Binary Counter | Harris | DIP-16

MPN: CD4020AF3 ✗ Cuối đời
DIP-16 Package
MOQ: 1 |

CD4020AF3 Tóm tắt

The Harris Corporation CD4020AF3 is a CD4000-series CMOS ripple counter in a 16-pin dual in-line package. The device is categorized as a counter IC element with a 14-bit counter stage and is intended for frequency division, timing, sequencing, and digital clock applications. Its through-hole DIP-16 construction supports conventional PCB assembly, prototyping, repair, and applications that require a readily available counter rather than a complex programmable digital controller.

A binary ripple counter is a sequential digital circuit that divides an input clock by powers of two. The CD4020AF3 belongs to the CMOS logic hierarchy, where CMOS means complementary metal-oxide-semiconductor. CMOS counters provide a practical way to reduce a clock frequency while preserving a simple digital interface. The part can be used in designs requiring periodic events, elapsed-time measurement, waveform repetition, programmable timers, and low-frequency clock generation.

The CD4020AF3 uses a 16-pin DIP package, and distributor listings identify the device as a counter with a 14-bit count element. The CD4020 family is associated with the CD4000 CMOS logic series, a broad family historically used for low-power digital logic implementation. Exact operating voltage, current, timing, propagation-delay, maximum input frequency, and environmental limits must be confirmed in the manufacturer datasheet before a production design is released.

The AF3 ordering code identifies a particular Harris Corporation package and qualification configuration. Because availability and lifecycle status can differ between manufacturers, distributors, and legacy inventory channels, engineers should verify the exact package dimensions, temperature range, marking convention, and sourcing condition before placing an order. The CD4020AF3 is especially relevant to repair and redesign work where changing the PCB footprint is undesirable and a pin-compatible 16-pin counter is required.

Typical circuit roles include binary frequency division in clock-generation modules, event-counting stages in industrial controls, repetitive pulse timing in test equipment, and low-power sequencing in embedded systems. A practical design should include reset-state analysis, unused-input biasing, clock-edge selection, and output-decode logic appropriate to the intended count sequence.

This page combines the exact CD4020AF3 identity, package classification, sourcing information, application guidance, and pin-compatible replacement guidance. It also highlights the practical distinction between a true drop-in replacement and a merely similar counter: pin arrangement, count length, logic levels, supply range, timing, and qualification requirements must all match before substitution is appropriate.

For new designs, begin with the manufacturer datasheet and confirm the reset behavior, output states, operating limits, and absolute maximum ratings. For legacy equipment, evaluate the replacement in the complete system because timing margin and unused-pin treatment can affect reliability even when the physical footprint is unchanged.

Bộ thay thế dễ dàng lắp đặt cho CD4020AF3 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

CD4020BF3A

✅ Drop-In
📦 DIP-16
Same CD4020 family and 16-pin DIP format; exact count length, supply range, timing grade, temperature range, and qualification differences require datasheet comparison

📋 Tham chiếu thay thế (không có trong danh mục)

CD4020AF3 Tỷ lệ tối đa & tính chất điện

Product Type Binary ripple counter IC
Logic Family CD4000 CMOS series
Count Element 14-bit
Package Type DIP-16
Số chân 16 pins
Kiểu lắp đặt Through-hole
Manufacturer Harris Corporation
Trạng thái RoHS Compliant

Hướng dẫn cấu hình chân CD4020AF3 dip-16

Cấu hình chân cho CD4020AF3 (dip-16 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân dip-16 cho CD4020AF3

Không có dữ liệu chân cụ thể sẵn có cho CD4020AF3.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

CD4020AF3 phù hợp cho 6 Áp dụngs: Binary Clock Frequency Divider, Industrial Event Counter, Repetitive Pulse Generator, Legacy Instrumentation Retimer, Digital Sequencer and Timer, Educational Digital Logic Platform.

⚡

Binary Clock Frequency Divider

The CD4020AF3 is suitable for dividing a periodic input clock into slower binary-rate outputs in digital timing and control systems. Its 14-bit counter element provides multiple tap points, allowing one clock source to produce several related frequencies rather than requiring a separate divider for each timing interval. The 16-pin DIP package also simplifies insertion into legacy through-hole timing boards. Before implementation, verify the manufacturer timing table, reset behavior, and supply-voltage limits so that the divider remains within valid propagation-delay and operating conditions.

🏭

Industrial Event Counter

The CD4020AF3 can count recurring events when an external sensor or comparator produces clean, debounced pulses. A 14-bit counter stage gives the controller a compact way to accumulate pulses without requiring a microcontroller counter peripheral. In an industrial design, the pulse amplitude, clock transition timing, reset duration, and supply level remain critical. Confirm the electrical limits in the manufacturer datasheet and add proper input conditioning to prevent multiple counts from switch bounce or noisy transitions.

🧩

Repetitive Pulse Generator

When the CD4020AF3 counter output is fed back through suitable shaping logic, it can create a periodic pulse train with a programmable division ratio. This arrangement is useful in test fixtures, sequencers, and equipment that must repeat a control action at a lower rate than its master oscillator. The designer must account for propagation delay, reset synchronization, and any feedback-loop timing margin. Validate the maximum input frequency and output transition behavior in the manufacturer datasheet before setting the operating clock.

🔧

Legacy Instrumentation Retimer

The CD4020AF3 can divide a reference clock in laboratory or industrial instrumentation to obtain a slower timing base. A 14-bit counter offers numerous binary taps for selecting a divider interval, while the DIP-16 format supports repair of older through-hole boards. For instrumentation, use the counter with clean clocking and synchronous reset practices to prevent metastability near rollover. Confirm the device's operating limits, output-drive capability, and timing margin against the target reference frequency before production use.

⏱️

Digital Sequencer and Timer

The CD4020AF3 can serve as the counting element of a multistage digital timer when its binary outputs feed combinational decode logic. This approach is useful where a simple fixed sequence must control lamps, relays, or acquisition stages without a microcontroller. Each decoded transition should be checked for rollover and reset hazards, and unused counter outputs should not be relied upon for timing accuracy. Use the datasheet's truth table and timing characteristics to define the reset window and maximum sequential-transition rate.

🖥️

Educational Digital Logic Platform

The CD4020AF3 is useful in educational and prototype boards that demonstrate binary counting, ripple propagation, frequency division, and decoded timer states. Its visible through-hole DIP-16 package makes the sixteen connections accessible for wiring and measurement. The relevant learning checks include clock-edge behavior, reset priority, counter rollover, and propagation-delay accumulation across multiple stages. Because the exact operating limits are not stated in the indexed summaries, students and instructors should use the manufacturer datasheet before applying a specific supply voltage or clock rate.

Tóm tắt các sản phẩm được đề xuất

CD4020BF3A Same-family 16-pin counter candidate for design review Được sử dụng trong: Binary Clock Frequency Divider, Industrial Event Counter, Repetitive Pulse Generator, Legacy Instrumentation Retimer, Digital Sequencer and Timer, Educational Digital Logic Platform
What is the CD4020AF3?
The CD4020AF3 is a Harris Corporation CD4000-series CMOS binary ripple counter packaged in a 16-pin DIP. Distributor records classify it as a counter IC element with a 14-bit stage. It is intended for clock division, event counting, timing, and repetitive-pulse applications where a simple fixed-ratio binary output is more appropriate than a programmable counter.
What is the operating voltage of the CD4020AF3?
The CD4020AF3 operating-voltage range must be confirmed from the manufacturer datasheet before design use. The available product records establish the part as a CD4000-series CMOS counter but do not state a numerical supply range. Check the electrical-characteristics table against the voltage available in the target circuit, especially in legacy equipment that may use a nonstandard supply.
Where can I download the CD4020AF3 datasheet PDF?
The CD4020AF3 datasheet PDF is available through the manufacturer-document link on this page and through the indexed technical-document result for the exact MPN. Use the PDF to verify the 16-pin connection diagram, reset behavior, supply limits, propagation delays, and timing conditions. The external PDF host is a document repository rather than an official product page.
Where can I find the CD4020AF3 pinout?
The CD4020AF3 pinout is documented in the manufacturer datasheet under the 16-pin package connection diagram. The exact numbered signal names are not reproduced on this page because the indexed document excerpt does not list them. Use the diagram to identify the clock, reset, supply, ground, and count-output connections before assigning PCB nets.
What package does the CD4020AF3 use?
The CD4020AF3 uses a through-hole DIP-16 package. This package designation is explicitly associated with the CD4000 counter listing and supports conventional 16-pin PCB footprints. Before ordering a replacement, compare body length, row spacing, and pin numbering rather than relying on the generic DIP-16 label alone.
How many bits does the CD4020AF3 counter provide?
The CD4020AF3 provides a 14-bit counter element. A 14-bit binary counter can represent 16,384 count states, although the usable output range and reset behavior must be checked in the manufacturer datasheet. Higher-order outputs are commonly used for slower divided clock signals, while lower-order outputs retain the faster input-derived frequency.
Is CD4020BF3A a drop-in replacement for CD4020AF3?
CD4020BF3A is the only distinct replacement candidate identified by the component cross-reference results, and it appears in the same CD4020 counter family. Before treating it as a drop-in replacement, verify that its 16-pin connection, count length, supply range, timing grades, temperature range, and qualification requirements match CD4020AF3. Package equivalence alone does not guarantee system compatibility.
What can replace the CD4020AF3?
A replacement should be a CD4020-family counter in the same 16-pin DIP footprint with matching clock, reset, supply, and output assignments. CD4020BF3A is the identified same-family candidate, but final substitution requires comparison of its electrical and qualification specifications. Do not select a generic binary counter unless its output arrangement and timing behavior satisfy the original circuit.
Where to buy the CD4020AF3 online?
Use the Request a Quote form on this page to request CD4020AF3 availability, current lead time, and sourcing options without naming a preferred seller. Exact ordering information should include the full MPN CD4020AF3 and DIP-16 package requirement. Availability may vary because this is a legacy Harris Corporation catalog designation.
What is the price of the CD4020AF3?
Use the Request a Quote form on this page for the current CD4020AF3 unit pricing, quantity breaks, stock status, and lead time. The product indexes show availability and comparison listings but do not expose an exact unit price with an explicitly printed quantity break. The platform therefore avoids publishing an unsupported static price figure.
Is the CD4020AF3 in stock and what is its lead time?
Current CD4020AF3 stock and lead time should be requested through the Request a Quote form on this page. One indexed result describes the part as in stock, but that statement is not sufficient to establish present inventory for every package configuration. Include the required quantity, manufacturing date preference, and traceability requirements with the request.
Is the CD4020AF3 suitable for an industrial counter circuit?
The CD4020AF3 can fit a conventional fixed-ratio counting circuit when its verified supply range, timing, and temperature limits match the industrial environment. Its 14-bit counter element and 16-pin DIP package support legacy counter and clock-divider designs. Confirm qualification requirements and operational limits in the manufacturer datasheet before releasing an industrial production build.
CD4020AF3 vs CD4020BF3A: which is better for a legacy replacement?
CD4020BF3A is the stronger replacement candidate because it is identified within the CD4020 family, but it should be selected only after a line-by-line electrical and timing comparison. CD4020AF3 is the target legacy catalog designation. If the successor has a compatible 16-pin connection and equal or better timing at the system supply voltage, it may permit a no-PCB-change repair.
When should I choose CD4020AF3 instead of CD4020BF3A?
Choose CD4020AF3 when maintaining the exact original Harris Corporation catalog device is necessary for bill-of-material consistency, historical qualification, or traceability to an existing approved design. Choose CD4020BF3A only after confirming that its package, pinout, supply range, timing, environmental ratings, and lifecycle suitability satisfy the original circuit requirements.
What are the key specifications of CD4020AF3 that engineers should know?
The key confirmed characteristics are a 14-bit counter element, CD4000 CMOS logic family, 16-pin DIP package, through-hole construction, and Harris Corporation origin. The part is categorized as a counter, divider, and logic IC. Numerical supply voltage, maximum clock frequency, timing delays, power dissipation, and temperature limits must be taken from the manufacturer datasheet before implementation.

Dữ liệu tham khảo kỹ thuật cho CD4020AF3 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose CD4020AF3 when an exact Harris Corporation CD4020AF3 catalog device is required for maintenance, approved-part continuity, or a legacy bill of materials. Choose CD4020BF3A only after comparing its pinout, count length, operating voltage, timing, temperature rating, and qualification details against the original device. For a new design, a programmable counter or microcontroller may offer greater flexibility, but it can require a different PCB and logic architecture. For an existing through-hole board, retaining a CD4020-family DIP counter generally minimizes mechanical changes. Do not select a replacement solely because it is described as a CD4000 counter; confirm the connection diagram and every timing and electrical limit before substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này CD4020BF3A
Package DIP-16 DIP-16
Brand Harris Corporation Harris Corporation
Product Type Binary ripple counter CD4020-family counter
Logic Family CD4000 CMOS CD4000 CMOS
Mounting Type Through-hole Through-hole

Bảo phân biệt quan trọng

  • Exact legacy Harris catalog identity (vsCD4020BF3A)
  • Confirmed 14-bit counter element (vsCD4020BF3A)
  • Established DIP-16 migration path (vsCD4020BF3A)

Ghi chú thiết kế

Treat the clock input as a timing-critical node. Route it away from high-current switching nodes, provide a return path, and avoid long parallel branches that can increase capacitive loading and clock-edge distortion. If an external contact or comparator drives the clock, use Schmitt-trigger conditioning to prevent multiple transitions from noise or slow edges. Confirm the maximum input frequency and propagation-delay limits in the manufacturer datasheet before selecting the counter rate.

Do not assume that a CD4000 counter with a matching package is automatically interchangeable. Verify pin assignments, reset polarity and timing, count length, logic thresholds, operating voltage, propagation delay, temperature grade, and qualification status. Unused inputs must be held at a valid logic level according to the datasheet, while unused outputs should be left unconnected unless the circuit specifically requires them.

Keep the supply distribution short and decouple the counter close to its supply and ground pins with the capacitance and dielectric recommended by the manufacturer. A counter can experience transient current when multiple internal stages change during rollover, so adequate local decoupling helps prevent supply disturbance from shifting other digital nodes. For battery-powered equipment, evaluate both switching activity and quiescent consumption because the effective supply current depends on clock rate and logic-state activity.

Use the manufacturer's pin-1 indication and land pattern when installing a replacement in a through-hole board. Check row spacing, body length, lead diameter, and notch or dimple orientation against the actual socket or PCB footprint. Confirm that the reset path and clock path are not routed beneath long analog or switching sections where they could collect noise. For socketed legacy assemblies, verify the socket type and contact reliability rather than assuming every DIP-16 socket is mechanically identical.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS compliance is stated in the indexed CD4000 DIP-16 counter listing. No additional compliance or qualification claim is established.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

CD4020AF3 datasheet CD4020AF3 specifications CD4020AF3 pinout CD4020AF3 datasheet pdf CD4020AF3 equivalent CD4020AF3 replacement CD4020AF3 cross reference CD4020AF3 footprint CD4020AF3 price CD4020AF3 stock CD4020AF3 vs CD4020BF3A Harris CD4020AF3

Các bộ phận và thuật ngữ liên quan

Harris Corporation CD4020AF3 CD4020BF3A CD4000 CMOS logic series binary ripple counter counter IC divider logic IC CMOS 14-bit counter DIP-16 through-hole package clock divider frequency division event counter digital timer reset input clock input propagation delay ripple counter RoHS semiconductor
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ