CD4022BF/3 - CMOS Octal Counter | Harris Corporation
MPN: CD4022BF/3 ✓ Hoạt độngCD4022BF/3 Tóm tắt
A CMOS counter is a digital logic IC that advances an internal binary state on each active clock edge and exposes selected states through decoded outputs. The CD4000-series hierarchy places this device within CMOS logic, counter and divider circuits, and ultimately within the broader integrated-circuit and digital-logic categories. Its decoded outputs reduce the external logic required when a system needs several division ratios from one clock source.
The CD4022BF family supports typical operating supply values of 3.3 V, 5 V, 9 V, 12 V, and 15 V. The 16-CDIP package provides generous lead spacing for through-hole assembly and is suitable for legacy industrial, control, instrumentation, and test equipment where stable operation over an extended temperature range is important. The ceramic DIP construction also differentiates this packaged device from modern plastic small-outline implementations.
The octal counter architecture includes a clock input, reset control, carry output, and four decoded outputs. Reset behavior and active clock-edge requirements must be followed exactly when connecting external control logic. Because decoded counter outputs can change several timing relationships during rollover, circuits that cascade multiple counters should account for propagation delay and reset recovery behavior.
Typical uses include frequency division, programmable timing generators, sequential control logic, digital clocks, event-counting modules, and industrial test equipment. The eight-output organization makes the device useful when several divide stages must be observed simultaneously, while the carry output can provide a higher-order count indication for cascaded arrangements.
For a new through-hole design, verify the exact pin assignment, supply-voltage limits, and timing values in the manufacturer datasheet before releasing the PCB. Keep clock and reset traces short, provide a stable supply reference, and avoid routing high-current switching signals adjacent to counter inputs to reduce contamination of transition timing.
This page consolidates the available technical information, sourcing guidance, cross-brand replacement context, and practical integration considerations for engineers evaluating the CD4022BF/3. It is intended to support design selection and PCB planning rather than replace the manufacturer’s complete electrical characteristics and test data.
Bộ thay thế dễ dàng lắp đặt cho CD4022BF/3 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CD4022BF/3 (cùng hình factor và footprint) — khác nhau ở Logic Family, Package.
CD4022BF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CD4022BF3A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CD4022BF/3 Tỷ lệ tối đa & tính chất điện
| Product Type | CMOS octal counter with eight decoded outputs |
| Logic Family | CD4000-series CMOS |
| Number of Decoded Outputs | 4 independent decoded outputs |
| Total Output Count | 8 decoded outputs |
| Typical Operating Supply Voltage | 3.3 V, 5 V, 9 V, 12 V, or 15 V |
| Khoảng nhiệt độ hoạt động | -55°C to 125°C |
| Hộp | 16-lead ceramic DIP (16-CDIP) |
| Kiểu lắp đặt | Through-hole |
| Logic Type | CMOS |
| Counter Configuration | Octal counter with decoded outputs |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân CD4022BF/3 16-lead ceramic dip (16-cdip)
Cấu hình chân cho CD4022BF/3 (16-lead ceramic dip (16-cdip) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CD4022BF/3.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CD4022BF/3 phù hợp cho 6 Áp dụngs: Industrial Frequency Divider, Programmable Timer Control, Sequential Control Logic, Digital Clock and Event Counter, Test and Measurement Instrumentation, Legacy Equipment Repair and Replacement.
Industrial Frequency Divider
The CD4022BF/3 is suitable for dividing a periodic industrial signal into selectable timing intervals because its decoded outputs provide divide-by-2, divide-by-4, divide-by-8, and divide-by-10 stages. The 16-CDIP package supports through-hole construction on legacy control boards, while its -55°C to 125°C specification suits temperature-controlled factory equipment. Designers should confirm maximum clock frequency, propagation delay, and output timing at the selected 3.3 V, 5 V, 9 V, 12 V, or 15 V supply before fixing the input frequency.
Được đề xuất
Programmable Timer Control
The CD4022BF/3 can organize a clocked timing sequence by exposing several decoded count states to control logic. Its eight-output organization allows one counter to provide multiple timing taps, reducing the number of separate divider stages required in a legacy timer board. The ceramic 16-CDIP format supports repair and expansion of through-hole instrumentation, while the -55°C to 125°C range supports demanding environments. Confirm reset-release timing and clock-edge requirements in the manufacturer documentation.
Được đề xuất
Sequential Control Logic
The CD4022BF/3 fits legacy sequential-control systems where a single clock must advance a machine through predefined states. Its decoded outputs can act as stage indicators for relays, lamps, actuators, or interlock signals, while the carry output provides a count-boundary indication. The 16-CDIP package makes it practical to maintain or reproduce older control-panel layouts, and its -55°C to 125°C range supports industrial use. Designers must account for propagation delay when cascading stages.
Được đề xuất
Digital Clock and Event Counter
The CD4022BF/3 can provide event-counting or time-base division in a legacy digital clock by translating successive clock pulses into decoded count states. Multiple decoded outputs allow display drivers, alarm logic, or cycle indicators to observe the counter without adding a divider for every ratio. The -55°C to 125°C operating range and ceramic DIP construction suit instrument and industrial clock modules. The clock source should be clean, and designers should verify carry and reset behavior at the intended supply voltage.
Được đề xuất
Test and Measurement Instrumentation
The CD4022BF/3 is applicable in legacy test instruments that require repeatable division, stepped sequencing, or deterministic timing references. The 16-CDIP package is directly compatible with through-hole instrument construction, and the extended -55°C to 125°C range supports controlled laboratory and production environments. Decoded outputs can trigger measurement stages or status indicators, while the carry output can mark count rollover. Validate timing margins, output loading, and reset behavior against the manufacturer data.
Được đề xuất
Legacy Equipment Repair and Replacement
The CD4022BF/3 is particularly relevant when repairing an older through-hole instrument or industrial controller whose original counter used a 16-CDIP footprint and CD4022B decoded-output arrangement. Maintaining the ceramic package preserves board compatibility and can avoid redesigning dense legacy routing. The -55°C to 125°C rating provides useful operating margin in controlled equipment. Before ordering, verify the pin map, supply limits, clock-edge convention, reset polarity, and mechanical dimensions against the original assembly documentation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CD4022BF/3 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CD4022BF | CD4022BF3A |
|---|---|---|---|
| Package | 16-CDIP | 16-CDIP | 16-CDIP |
| Brand | Harris Corporation | Texas Instruments | Harris Corporation |
| Product Type | CMOS octal counter with eight decoded outputs | CMOS octal counter with eight decoded outputs | CMOS octal counter with eight decoded outputs |
| Decoded Outputs | 8 outputs | 8 outputs | 8 outputs |
| Operating Temperature | -55°C to 125°C | -55°C to 125°C | -55°C to 125°C |
| Typical Supply Voltage | 3.3 V, 5 V, 9 V, 12 V, or 15 V | 3.3 V, 5 V, 9 V, 12 V, or 15 V | 3.3 V, 5 V, 9 V, 12 V, or 15 V |
| Logic Family | CD4000-series CMOS | CD4000-series CMOS | CD4000-series CMOS |
| Mounting Style | Through-hole | Through-hole | Through-hole |
| Counter Function | Divide-by-2, divide-by-4, divide-by-8, and divide-by-10 decoded counter | Divide-by-2, divide-by-4, divide-by-8, and divide-by-10 decoded counter | Divide-by-2, divide-by-4, divide-by-8, and divide-by-10 decoded counter |
Bảo phân biệt quan trọng
- Maintains a legacy 16-CDIP footprint with extended temperature capability (vsCD4022BF3A)
- Provides a directly related manufacturer ordering option (vsCD4022BF)
- Supports multiple division ratios from one counter (vsCD4022BF)
Ghi chú thiết kế
Preserve the original 16-CDIP footprint when replacing CD4022BF/3 in a through-hole assembly. Confirm lead pitch, row spacing, ceramic-package body dimensions, and pin numbering rather than relying only on the generic DIP outline. Position the device away from high-current switching stages and route the clock and reset nets away from inductive or relay-drive wiring to reduce false clock edges and reset disturbances.
Keep the clock trace short and provide a local supply bypass path close to the device. Since a counter can respond to narrow transients during its active clock transition, slow or noisy input edges should be avoided and unused inputs should be tied to a defined CMOS logic level. Validate the external reset pulse width and recovery interval against the manufacturer timing table before using reset to synchronize multiple counters.
Do not assume that similar CD4022B suffixes have identical package or qualification meanings. Confirm the manufacturer, ordering suffix, temperature grade, and tube or other delivery format before substituting. Also verify whether the clock counts on a rising or falling edge and whether reset is synchronous or asynchronous. These details determine whether a substitute is electrically equivalent in the original circuit rather than merely mechanically similar.
Thông tin tuân thủ
No specific RoHS, REACH, halogen-free, or conflict-minerals declaration is stated for the exact CD4022BF/3 ordering code. AEC-Q100 is not applicable because this is a logic IC rather than an automotive-qualified power device.