CD4022BF/3 - CMOS Octal Counter | Harris Corporation
MPN: CD4022BF/3 ✓ 啟用中CD4022BF/3 概覽
A CMOS counter is a digital logic IC that advances an internal binary state on each active clock edge and exposes selected states through decoded outputs. The CD4000-series hierarchy places this device within CMOS logic, counter and divider circuits, and ultimately within the broader integrated-circuit and digital-logic categories. Its decoded outputs reduce the external logic required when a system needs several division ratios from one clock source.
The CD4022BF family supports typical operating supply values of 3.3 V, 5 V, 9 V, 12 V, and 15 V. The 16-CDIP package provides generous lead spacing for through-hole assembly and is suitable for legacy industrial, control, instrumentation, and test equipment where stable operation over an extended temperature range is important. The ceramic DIP construction also differentiates this packaged device from modern plastic small-outline implementations.
The octal counter architecture includes a clock input, reset control, carry output, and four decoded outputs. Reset behavior and active clock-edge requirements must be followed exactly when connecting external control logic. Because decoded counter outputs can change several timing relationships during rollover, circuits that cascade multiple counters should account for propagation delay and reset recovery behavior.
Typical uses include frequency division, programmable timing generators, sequential control logic, digital clocks, event-counting modules, and industrial test equipment. The eight-output organization makes the device useful when several divide stages must be observed simultaneously, while the carry output can provide a higher-order count indication for cascaded arrangements.
For a new through-hole design, verify the exact pin assignment, supply-voltage limits, and timing values in the manufacturer datasheet before releasing the PCB. Keep clock and reset traces short, provide a stable supply reference, and avoid routing high-current switching signals adjacent to counter inputs to reduce contamination of transition timing.
This page consolidates the available technical information, sourcing guidance, cross-brand replacement context, and practical integration considerations for engineers evaluating the CD4022BF/3. It is intended to support design selection and PCB planning rather than replace the manufacturer’s complete electrical characteristics and test data.
直接替換替代品,適用於 CD4022BF/3 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CD4022BF/3 (相同外形與佔位) — 差異在於 Logic Family, Package.
CD4022BF
✅ 直接替換聯絡詢價
查看資料表 →CD4022BF3A
✅ 直接替換📋 參考替代品(不在目錄中)
CD4022BF/3 最大額定值與電氣特性
| Product Type | CMOS octal counter with eight decoded outputs |
| Logic Family | CD4000-series CMOS |
| Number of Decoded Outputs | 4 independent decoded outputs |
| Total Output Count | 8 decoded outputs |
| Typical Operating Supply Voltage | 3.3 V, 5 V, 9 V, 12 V, or 15 V |
| 工作溫度範圍 | -55°C to 125°C |
| 封裝 | 16-lead ceramic DIP (16-CDIP) |
| 安裝類型 | Through-hole |
| Logic Type | CMOS |
| Counter Configuration | Octal counter with decoded outputs |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
CD4022BF/3 16-lead ceramic dip (16-cdip) 腳位配置指南
CD4022BF/3(16-lead ceramic dip (16-cdip) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CD4022BF/3.
請參閱 資料表 以查看完整腳位配置。
典型應用
CD4022BF/3 適用於 6 應用s: Industrial Frequency Divider, Programmable Timer Control, Sequential Control Logic, Digital Clock and Event Counter, Test and Measurement Instrumentation, Legacy Equipment Repair and Replacement.
Industrial Frequency Divider
The CD4022BF/3 is suitable for dividing a periodic industrial signal into selectable timing intervals because its decoded outputs provide divide-by-2, divide-by-4, divide-by-8, and divide-by-10 stages. The 16-CDIP package supports through-hole construction on legacy control boards, while its -55°C to 125°C specification suits temperature-controlled factory equipment. Designers should confirm maximum clock frequency, propagation delay, and output timing at the selected 3.3 V, 5 V, 9 V, 12 V, or 15 V supply before fixing the input frequency.
推薦
Programmable Timer Control
The CD4022BF/3 can organize a clocked timing sequence by exposing several decoded count states to control logic. Its eight-output organization allows one counter to provide multiple timing taps, reducing the number of separate divider stages required in a legacy timer board. The ceramic 16-CDIP format supports repair and expansion of through-hole instrumentation, while the -55°C to 125°C range supports demanding environments. Confirm reset-release timing and clock-edge requirements in the manufacturer documentation.
推薦
Sequential Control Logic
The CD4022BF/3 fits legacy sequential-control systems where a single clock must advance a machine through predefined states. Its decoded outputs can act as stage indicators for relays, lamps, actuators, or interlock signals, while the carry output provides a count-boundary indication. The 16-CDIP package makes it practical to maintain or reproduce older control-panel layouts, and its -55°C to 125°C range supports industrial use. Designers must account for propagation delay when cascading stages.
推薦
Digital Clock and Event Counter
The CD4022BF/3 can provide event-counting or time-base division in a legacy digital clock by translating successive clock pulses into decoded count states. Multiple decoded outputs allow display drivers, alarm logic, or cycle indicators to observe the counter without adding a divider for every ratio. The -55°C to 125°C operating range and ceramic DIP construction suit instrument and industrial clock modules. The clock source should be clean, and designers should verify carry and reset behavior at the intended supply voltage.
推薦
Test and Measurement Instrumentation
The CD4022BF/3 is applicable in legacy test instruments that require repeatable division, stepped sequencing, or deterministic timing references. The 16-CDIP package is directly compatible with through-hole instrument construction, and the extended -55°C to 125°C range supports controlled laboratory and production environments. Decoded outputs can trigger measurement stages or status indicators, while the carry output can mark count rollover. Validate timing margins, output loading, and reset behavior against the manufacturer data.
推薦
Legacy Equipment Repair and Replacement
The CD4022BF/3 is particularly relevant when repairing an older through-hole instrument or industrial controller whose original counter used a 16-CDIP footprint and CD4022B decoded-output arrangement. Maintaining the ceramic package preserves board compatibility and can avoid redesigning dense legacy routing. The -55°C to 125°C rating provides useful operating margin in controlled equipment. Before ordering, verify the pin map, supply limits, clock-edge convention, reset polarity, and mechanical dimensions against the original assembly documentation.
推薦
推薦產品摘要
工程參考資料,適用於 CD4022BF/3 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CD4022BF | CD4022BF3A |
|---|---|---|---|
| Package | 16-CDIP | 16-CDIP | 16-CDIP |
| Brand | Harris Corporation | Texas Instruments | Harris Corporation |
| Product Type | CMOS octal counter with eight decoded outputs | CMOS octal counter with eight decoded outputs | CMOS octal counter with eight decoded outputs |
| Decoded Outputs | 8 outputs | 8 outputs | 8 outputs |
| Operating Temperature | -55°C to 125°C | -55°C to 125°C | -55°C to 125°C |
| Typical Supply Voltage | 3.3 V, 5 V, 9 V, 12 V, or 15 V | 3.3 V, 5 V, 9 V, 12 V, or 15 V | 3.3 V, 5 V, 9 V, 12 V, or 15 V |
| Logic Family | CD4000-series CMOS | CD4000-series CMOS | CD4000-series CMOS |
| Mounting Style | Through-hole | Through-hole | Through-hole |
| Counter Function | Divide-by-2, divide-by-4, divide-by-8, and divide-by-10 decoded counter | Divide-by-2, divide-by-4, divide-by-8, and divide-by-10 decoded counter | Divide-by-2, divide-by-4, divide-by-8, and divide-by-10 decoded counter |
主要差異化特點
- Maintains a legacy 16-CDIP footprint with extended temperature capability (對比CD4022BF3A)
- Provides a directly related manufacturer ordering option (對比CD4022BF)
- Supports multiple division ratios from one counter (對比CD4022BF)
設計說明
Preserve the original 16-CDIP footprint when replacing CD4022BF/3 in a through-hole assembly. Confirm lead pitch, row spacing, ceramic-package body dimensions, and pin numbering rather than relying only on the generic DIP outline. Position the device away from high-current switching stages and route the clock and reset nets away from inductive or relay-drive wiring to reduce false clock edges and reset disturbances.
Keep the clock trace short and provide a local supply bypass path close to the device. Since a counter can respond to narrow transients during its active clock transition, slow or noisy input edges should be avoided and unused inputs should be tied to a defined CMOS logic level. Validate the external reset pulse width and recovery interval against the manufacturer timing table before using reset to synchronize multiple counters.
Do not assume that similar CD4022B suffixes have identical package or qualification meanings. Confirm the manufacturer, ordering suffix, temperature grade, and tube or other delivery format before substituting. Also verify whether the clock counts on a rising or falling edge and whether reset is synchronous or asynchronous. These details determine whether a substitute is electrically equivalent in the original circuit rather than merely mechanically similar.
合規資訊
No specific RoHS, REACH, halogen-free, or conflict-minerals declaration is stated for the exact CD4022BF/3 ordering code. AEC-Q100 is not applicable because this is a logic IC rather than an automotive-qualified power device.