CD4052BCM - 2-Channel 4:1 CMOS Analog Multiplexer | onsemi
MPN: CD4052BCM ✓ Hoạt độngCD4052BCM Tóm tắt
A multiplexer is an analog switch network that connects one common terminal to one of several individual terminals. A demultiplexer reverses that arrangement, routing a common signal into one selected branch. The CD4052BCM combines two 4:1 networks in one package, with binary select inputs controlling which pair of channels is connected. Its wide supply range allows operation from 3.3 V and 5 V logic systems through higher-voltage analog and industrial control rails.
The principal electrical characteristics include a 240-ohm on resistance and low-leakage CMOS behavior when channels are turned off. Because the on resistance is specified for the conducting path, signal attenuation and channel-to-channel matching should be considered in precision measurement paths. The control inputs are CMOS-compatible, and the inhibit input provides a common mechanism for disabling the selected channels during reset, test, or safety-sensitive transitions.
The CD4052BCM is a pin-compatible member of the CD4000 CMOS logic family. Its 16-pin SOIC package is widely supported by standard PCB footprints and automated assembly processes. The M suffix identifies the surface-mount package used by onsemi, while the C suffix identifies the commercial temperature grade. The device is suitable for designs requiring analog routing at modest signal frequencies, particularly when a single logic control section can manage two analog channels.
Typical uses include selecting between audio sources, routing sensor outputs into an analog-to-digital converter, switching reference voltages in measurement circuits, multiplexing control lines in test equipment, and connecting multiple inputs to shared communications or instrumentation circuits. In these applications, the multiplexer reduces the number of external pins and routing components required at the system level.
The principal design consideration is signal integrity during channel switching. Keep traces short, provide a stable supply reference, and use the inhibit input to place the device in a defined state when the selected channel is not valid. Confirm that the source and destination signal amplitudes remain within the supply rails and that off-channel leakage is acceptable for the measurement or signal amplitude involved.
This page consolidates the manufacturer product identity, package details, distributor references, and practical application guidance for engineers evaluating the CD4052BCM. It also provides drop-in replacement context, pin-compatible alternatives, design notes, and a parameter comparison so the device can be selected and qualified efficiently for analog routing designs.
Bộ thay thế dễ dàng lắp đặt cho CD4052BCM — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CD4052BCM (cùng hình factor và footprint) — khác nhau ở Product Type, Mounting Type, Package, Channel Configuration, Control Inputs.
CD4052B
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →CD4052BM
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →CD4052BE
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →CD4052BCM Thông số kỹ thuật
| Product Type | Dual 4:1 analog multiplexer and demultiplexer |
| Number of Circuits | 2 circuits |
| On Resistance | 240 ohms |
| Số lượng chân | 16 pins |
| Hộp | 16-pin SOIC |
| Kiểu lắp đặt | Surface mount |
| Supply Voltage Range | 3 V to 18 V |
| Absolute Maximum DC Supply Voltage | -0.5 V to +18 V |
| Absolute Maximum Input Voltage | -0.5 V to VDD + 0.5 V |
| Storage Temperature Range | -65 C to +150 C |
| Power Dissipation | 700 mW |
| Control Inputs | A, B, C and Inhibit |
| Channel Configuration | 4:1 analog multiplexing and demultiplexing |
| Logic Family | CD4000 CMOS series |
| Commercial Grade | C suffix commercial temperature grade |
Hướng dẫn cấu hình chân CD4052BCM 16-pin soic
Cấu hình chân cho CD4052BCM (16-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho CD4052BCM.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CD4052BCM phù hợp cho 6 Áp dụngs: Audio Source Selection, Sensor Multiplexing, Precision Reference Switching, Data Acquisition Front Ends, Automated Test Equipment, Communications and Control Routing.
Audio Source Selection
The CD4052BCM is useful for selecting between audio or other low-frequency analog sources without adding a separate analog switch for each channel. Its dual 4:1 organization routes two related signal groups from four possible inputs, while the select and inhibit controls provide digital sequencing from a microcontroller. The 240-ohm on resistance should be considered together with the source and load impedances, and a buffer may be needed when the source impedance is high or insertion loss affects channel matching. The 16-pin SOIC package also supports compact analog boards where a discrete switch network would consume additional board area.
Được đề xuất
Sensor Multiplexing
The CD4052BCM can route several sensor outputs into a shared analog measurement channel, reducing the number of input pins and external routing components required at the system level. Two independent 4:1 sections allow paired measurements, such as a sensor signal plus its reference, to be selected together. Because the on resistance is 240 ohms, account for the resulting divider with the sensor output impedance and the input impedance of the following amplifier or converter. Keep the analog traces short and place the device close to the instrumentation front end to minimize added noise and settling time.
Được đề xuất
Precision Reference Switching
The dual analog multiplexer function is appropriate for selecting between voltage references, calibration levels, or test inputs in instrumentation systems. The CD4052BCM supports a 3 V to 18 V supply range, allowing it to operate alongside 3.3 V, 5 V, or higher-voltage analog circuitry. The 240-ohm channel resistance can affect reference accuracy, so use low-impedance references and a unity-gain buffer when the divider error is not acceptable. The inhibit function also helps isolate a channel during calibration transitions and prevents accidental signal coupling between selected sources.
Được đề xuất
Data Acquisition Front Ends
In a multiplexed data-acquisition front end, the CD4052BCM can route analog inputs to a shared amplifier, filter, or analog-to-digital conversion stage. Its two 4:1 sections allow the design to select two inputs in parallel or perform differential pairing without duplicating the routing package. Use short traces, a clean ground reference, and supply bypass capacitors close to the device to preserve measurement quality. Verify settling behavior and crosstalk against the bandwidth and source impedance of the acquisition chain, since the published 240-ohm on resistance is the primary channel loss parameter.
Được đề xuất
Automated Test Equipment
The CD4052BCM can route test stimuli and measured responses through a common set of instrumentation paths in automated test equipment. Its inhibit input allows the device to be placed into a controlled disabled state between measurements, and its dual structure supports selecting stimulus and return paths in a coordinated manner. The 16-pin SOIC package is easy to automate on a mixed-signal test board. Design the routing matrix around the 240-ohm on resistance, and use buffering where long cables or high-impedance instrument inputs would otherwise create excessive attenuation or crosstalk.
Được đề xuất
Communications and Control Routing
The CD4052BCM can select low-frequency control, status, or analog communication lines in a compact control module. The common select inputs make it straightforward to address two groups of channels with a digital controller, and the inhibit input provides a hardware means to inhibit signal transfer during reset or fault conditions. The 3 V to 18 V supply range supports both low-voltage digital systems and industrial control environments. Confirm that the selected signal levels remain within the supply rails and that the channel timing is adequate for the controlled signal rate.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CD4052BCM — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CD4052B | CD4052BM | CD4052BE |
|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | onsemi | onsemi | onsemi | onsemi |
| Multiplexer Function | Dual 4:1 analog multiplexer/demultiplexer | Dual 4:1 analog multiplexer/demultiplexer | Dual 4:1 analog multiplexer/demultiplexer | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| On Resistance | 240 ohms | 240 ohms | 240 ohms | 240 ohms |
| Supply Voltage Range | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V |
| Maximum DC Supply Voltage | 18 V | 18 V | 18 V | 18 V |
| Logic Family | CD4000 CMOS | CD4000 CMOS | CD4000 CMOS | CD4000 CMOS |
Bảo phân biệt quan trọng
- Dual 4:1 analog routing in a single 16-pin SOIC package (vsCD4052B)
- Wide supply compatibility for 3.3 V, 5 V, and higher-voltage systems (vsCD4052BM)
- Integrated inhibit control for controlled channel isolation (vsCD4052BE)
Ghi chú thiết kế
The 240-ohm on resistance forms a divider with the source and load impedances. Estimate the insertion loss using the source resistance, 240 ohms, and load resistance, and add a unity-gain buffer when the resulting amplitude error or channel mismatch is excessive. For sensor and audio signals, short traces and a stable ground reference are as important as the nominal on-resistance figure.
Place the supply bypass capacitor as close as practical to the device supply and ground pins, and route analog channel traces away from digital select and inhibit lines. Use the manufacturer pin-description table to confirm pin 1 orientation and the exposed relationships between the common terminals and channel terminals. A consistent, short analog layout reduces parasitic capacitance and improves settling after channel changes.
Do not treat the 18 V absolute maximum supply rating as a design operating point. The CD4052BCM is intended for the CD4000 family supply range of 3 V to 18 V, and input voltages must remain within the specified limits. Also avoid assuming that the inhibit control eliminates analog crosstalk; off-channel leakage and switching transients still depend on the source impedance, load, and surrounding layout.
Thông tin tuân thủ
The product listing confirms the onsemi CD4052BCM identity and 16-pin SOIC package. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established from the manufacturer information used for this page.