onsemi

CD4052BCM - 2-Channel 4:1 CMOS Analog Multiplexer | onsemi

부품 번호: CD4052BCM ✓ 활성
3 V to 18 V Vdss 240 ohms Rds(on) 16-pin SOIC Package
MOQ: 1 |

CD4052BCM 개요

The onsemi CD4052BCM is a dual 4:1 analog multiplexer and demultiplexer housed in a 16-pin SOIC package, with an on-resistance of 240 ohms per the product listing. It provides two independent analog switching paths for routing signals among multiple sources and destinations, making it suitable for audio, instrumentation, data acquisition, and embedded control designs. The device uses CMOS construction and is specified for operation from a 3 V to 18 V supply in the CD4000 family, with a maximum DC supply voltage of 18 V.

A multiplexer is an analog switch network that connects one common terminal to one of several individual terminals. A demultiplexer reverses that arrangement, routing a common signal into one selected branch. The CD4052BCM combines two 4:1 networks in one package, with binary select inputs controlling which pair of channels is connected. Its wide supply range allows operation from 3.3 V and 5 V logic systems through higher-voltage analog and industrial control rails.

The principal electrical characteristics include a 240-ohm on resistance and low-leakage CMOS behavior when channels are turned off. Because the on resistance is specified for the conducting path, signal attenuation and channel-to-channel matching should be considered in precision measurement paths. The control inputs are CMOS-compatible, and the inhibit input provides a common mechanism for disabling the selected channels during reset, test, or safety-sensitive transitions.

The CD4052BCM is a pin-compatible member of the CD4000 CMOS logic family. Its 16-pin SOIC package is widely supported by standard PCB footprints and automated assembly processes. The M suffix identifies the surface-mount package used by onsemi, while the C suffix identifies the commercial temperature grade. The device is suitable for designs requiring analog routing at modest signal frequencies, particularly when a single logic control section can manage two analog channels.

Typical uses include selecting between audio sources, routing sensor outputs into an analog-to-digital converter, switching reference voltages in measurement circuits, multiplexing control lines in test equipment, and connecting multiple inputs to shared communications or instrumentation circuits. In these applications, the multiplexer reduces the number of external pins and routing components required at the system level.

The principal design consideration is signal integrity during channel switching. Keep traces short, provide a stable supply reference, and use the inhibit input to place the device in a defined state when the selected channel is not valid. Confirm that the source and destination signal amplitudes remain within the supply rails and that off-channel leakage is acceptable for the measurement or signal amplitude involved.

This page consolidates the manufacturer product identity, package details, distributor references, and practical application guidance for engineers evaluating the CD4052BCM. It also provides drop-in replacement context, pin-compatible alternatives, design notes, and a parameter comparison so the device can be selected and qualified efficiently for analog routing designs.

드롭인 대체품: CD4052BCM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: CD4052BCM (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Mounting Type, Package, Channel Configuration, Control Inputs.

Texas Instruments
Product Type: CMOS analog multiplexer/demultiplexer
Mounting Type: Surface mount for CD4052BPWR
비교 대상: CD4052BCM →
Texas Instruments
Product Type: Dual 4:1 analog multiplexer/demultiplexer
Mounting Type: Through-hole
Package: 16-pin PDIP
비교 대상: CD4052BCM →
Texas Instruments
Product Type: CMOS analog multiplexer and demultiplexer
Channel Configuration: 4:1, two channels
Control Inputs: A, B, and inhibit
비교 대상: CD4052BCM →

CD4052B

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 16-pin SOIC
CMOS analog multiplexer/demultiplexer · 20 V · 4:1, 2-channel · 3 · Supported · 2 circuits · 240 ohm for CD4052BPWR variant

가격 문의

데이터시트 보기 →

CD4052BM

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 16-pin SOIC
CMOS analog multiplexer and demultiplexer · 20 V maximum · 4:1, two channels · 2 circuits · 240 ohm · Supported · A, B, and inhibit · 16-pin SOIC

가격 문의

데이터시트 보기 →

CD4052BE

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 16-pin SOIC
Dual 4:1 analog multiplexer/demultiplexer · 2 · 4:1 · 20 V · 3 V to 20 V · 240 ohm · 125 ohm typical · Very low; specific value not supplied

가격 문의

데이터시트 보기 →

CD4052BCM 사양

Product Type Dual 4:1 analog multiplexer and demultiplexer
Number of Circuits 2 circuits
On Resistance 240 ohms
핀 수 16 pins
패키지 16-pin SOIC
실장 유형 Surface mount
Supply Voltage Range 3 V to 18 V
Absolute Maximum DC Supply Voltage -0.5 V to +18 V
Absolute Maximum Input Voltage -0.5 V to VDD + 0.5 V
Storage Temperature Range -65 C to +150 C
Power Dissipation 700 mW
Control Inputs A, B, C and Inhibit
Channel Configuration 4:1 analog multiplexing and demultiplexing
Logic Family CD4000 CMOS series
Commercial Grade C suffix commercial temperature grade

CD4052BCM 16-pin soic 핀 구성 가이드

CD4052BCM(16-pin soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

CD4052BCM의 16-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: CD4052BCM.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

CD4052BCM 적합 용도: 6 애플리케이션s: Audio Source Selection, Sensor Multiplexing, Precision Reference Switching, Data Acquisition Front Ends, Automated Test Equipment, Communications and Control Routing.

🎧

Audio Source Selection

The CD4052BCM is useful for selecting between audio or other low-frequency analog sources without adding a separate analog switch for each channel. Its dual 4:1 organization routes two related signal groups from four possible inputs, while the select and inhibit controls provide digital sequencing from a microcontroller. The 240-ohm on resistance should be considered together with the source and load impedances, and a buffer may be needed when the source impedance is high or insertion loss affects channel matching. The 16-pin SOIC package also supports compact analog boards where a discrete switch network would consume additional board area.

🧩

Sensor Multiplexing

The CD4052BCM can route several sensor outputs into a shared analog measurement channel, reducing the number of input pins and external routing components required at the system level. Two independent 4:1 sections allow paired measurements, such as a sensor signal plus its reference, to be selected together. Because the on resistance is 240 ohms, account for the resulting divider with the sensor output impedance and the input impedance of the following amplifier or converter. Keep the analog traces short and place the device close to the instrumentation front end to minimize added noise and settling time.

🎯

Precision Reference Switching

The dual analog multiplexer function is appropriate for selecting between voltage references, calibration levels, or test inputs in instrumentation systems. The CD4052BCM supports a 3 V to 18 V supply range, allowing it to operate alongside 3.3 V, 5 V, or higher-voltage analog circuitry. The 240-ohm channel resistance can affect reference accuracy, so use low-impedance references and a unity-gain buffer when the divider error is not acceptable. The inhibit function also helps isolate a channel during calibration transitions and prevents accidental signal coupling between selected sources.

📊

Data Acquisition Front Ends

In a multiplexed data-acquisition front end, the CD4052BCM can route analog inputs to a shared amplifier, filter, or analog-to-digital conversion stage. Its two 4:1 sections allow the design to select two inputs in parallel or perform differential pairing without duplicating the routing package. Use short traces, a clean ground reference, and supply bypass capacitors close to the device to preserve measurement quality. Verify settling behavior and crosstalk against the bandwidth and source impedance of the acquisition chain, since the published 240-ohm on resistance is the primary channel loss parameter.

🏭

Automated Test Equipment

The CD4052BCM can route test stimuli and measured responses through a common set of instrumentation paths in automated test equipment. Its inhibit input allows the device to be placed into a controlled disabled state between measurements, and its dual structure supports selecting stimulus and return paths in a coordinated manner. The 16-pin SOIC package is easy to automate on a mixed-signal test board. Design the routing matrix around the 240-ohm on resistance, and use buffering where long cables or high-impedance instrument inputs would otherwise create excessive attenuation or crosstalk.

🌐

Communications and Control Routing

The CD4052BCM can select low-frequency control, status, or analog communication lines in a compact control module. The common select inputs make it straightforward to address two groups of channels with a digital controller, and the inhibit input provides a hardware means to inhibit signal transfer during reset or fault conditions. The 3 V to 18 V supply range supports both low-voltage digital systems and industrial control environments. Confirm that the selected signal levels remain within the supply rails and that the channel timing is adequate for the controlled signal rate.

What is the CD4052BCM used for?
The CD4052BCM is a dual 4:1 analog multiplexer and demultiplexer used to route one of several analog signals to a common output, or to route a common signal to one of several branches. It contains two independent switching networks in a 16-pin SOIC package. According to the onsemi CD4052B product family documentation, it is based on the CD4000 CMOS series and is intended for low-frequency analog signal routing.
What is the on resistance of the CD4052BCM?
The CD4052BCM has a specified on resistance of 240 ohms per channel. This value appears in the manufacturer product listing for the 2-circuit, 4:1, 240-ohm device. The on resistance should be included in the signal-loss budget for precision analog paths, while off-channel leakage and switching transients should also be evaluated for the selected operating conditions.
How many pins does the CD4052BCM have?
The CD4052BCM uses a 16-pin SOIC surface-mount package. The package contains the two analog channel groups, the select and inhibit control inputs, the common terminals, and the associated supply and ground connections. For PCB layout, use the manufacturer pin-description table in the CD4052B datasheet to assign the physical tracks and to verify the orientation of pin 1.
What is the supply voltage range of the CD4052BCM?
The CD4052BCM operates from a 3 V to 18 V supply in the CD4000 CMOS family, while the listed absolute maximum DC supply rating is -0.5 V to +18 V. The operating range supports 3.3 V and 5 V logic systems as well as higher-voltage analog rails. Do not operate above the 18 V maximum supply rating.
Can CD4052BCM replace CD4052B?
The CD4052BCM is the onsemi 16-pin SOIC ordering code for the CD4052B function, so it can be used when the original design calls for the CD4052B-family multiplexer and the same package, control logic, and analog levels are required. Confirm the exact pin arrangement and electrical limits against the datasheet for the specific manufacturer and package code before substitution.
What is the best drop-in replacement for CD4052BCM?
A suitable drop-in replacement must be a dual 4:1 CMOS analog multiplexer in the same 16-pin SOIC footprint with compatible select, inhibit, common, and channel terminals. The CD4052B-family ordering codes from onsemi are the closest same-manufacturer choices, while CD4000-family devices from other suppliers can be considered only after checking pinout, voltage range, on resistance, leakage, and switching-speed requirements. Use the Request a Quote form on this page for availability and sourcing support.
Is CD4052BCM suitable for audio signal routing?
Yes, the CD4052BCM can route audio or other low-frequency analog signals when the source impedance and acceptable insertion loss permit the 240-ohm on resistance. The 240-ohm channel resistance can create a divider with the source and load, so buffer the signal if the impedance is high or if channel matching is critical. The CD4000 CMOS control inputs make the device easy to sequence from a microcontroller or logic controller.
When should I choose CD4052BCM instead of a digital multiplexer?
Choose the CD4052BCM when the selected signals are analog and must pass through without digital conversion. A digital multiplexer is preferable for logic-level data buses because it provides defined logic thresholds and faster switching for digital traffic. The CD4052BCM is the better fit for audio sources, sensor outputs, reference voltages, and other continuously varying voltages that require a bidirectional analog path.
How do the select and inhibit inputs work in the CD4052BCM?
The A and B select inputs determine which of the four channels in each multiplexer section is connected, while the C input and inhibit input provide the control functions specified by the CD4052B logic implementation. The inhibit input is useful for forcing the device into a defined disabled state during reset or switching sequences. Verify the active logic level and truth table in the manufacturer datasheet before wiring the control signals.
Where can I download the CD4052BCM datasheet PDF?
The official manufacturer datasheet is available through the onsemi CD4052B product-page link listed on this page, and manufacturer-hosted PDF access should be preferred for the latest revision. The CD4052B family document covers the absolute maximum ratings, DC characteristics, control truth table, and pin assignments. Use the datasheet pin-description table when assigning PCB tracks.
What are the main applications of the CD4052BCM?
The CD4052BCM is used for analog source selection, audio channel routing, sensor multiplexing into shared measurement hardware, reference-voltage switching, and test or control systems that need several inputs routed through a shared path. Its dual 4:1 organization allows two related analog selections to be made with common control signals. The device is most appropriate for low-frequency analog routing rather than high-speed data buses.
Does the CD4052BCM support 3.3 V operation?
Yes, the CD4052BCM CD4000 CMOS family supports operation from a 3 V supply, making it suitable for 3.3 V systems. The control inputs must be driven by valid CMOS levels referenced to the device supply. Check the exact DC input thresholds and output leakage at the chosen supply voltage in the CD4052B datasheet, especially when the analog source can approach either supply rail.
What is the CD4052BCM storage temperature range?
The listed absolute maximum storage temperature range for the CD4052BCM is -65 C to +150 C. This is a storage rating, not the guaranteed operating-temperature specification. For production designs, use the commercial operating-temperature limits and electrical characteristics stated for the exact onsemi ordering code, and apply the manufacturer reflow and handling requirements for the SOIC package.
How do I prevent channel switching glitches in the CD4052BCM?
Channel switching glitches are reduced by controlling the select and inhibit inputs in a defined sequence and by keeping analog traces short with a low-impedance reference. Place a suitable bypass capacitor close to the device supply pins and use the inhibit input to disable the selected path while changing channels. Validate the transient behavior in the actual source impedance, load, and surrounding circuit because it depends on system-level conditions.
What should I check before buying CD4052BCM online?
Before buying CD4052BCM online, confirm the manufacturer, 16-pin SOIC package, operating-temperature grade, supply range, and the exact suffix required by the BOM. Check stock and lead time through the Request a Quote form on this page, and request current pricing rather than relying on a historical listing figure. Also verify that the required reel or tray packing format matches the assembly process.

엔지니어링 참조 데이터: CD4052BCM — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the CD4052BCM when your design needs two independent 4:1 analog selections in a 16-pin SOIC package and the CD4000 CMOS 3 V to 18 V supply range is appropriate. The same-manufacturer CD4052B-family ordering codes are the closest drop-in choices when the exact suffix, temperature grade, or packaging code differs, but confirm the pin arrangement and ordering requirements before substitution. If the source impedance is high, the signal must pass without meaningful attenuation, or channel matching is critical, add a buffer or choose a lower-resistance analog switch. For high-speed digital buses, use a digital multiplexer instead. For applications requiring a current specification, input-leakage limit, or guaranteed operating-temperature range beyond the values stated on this page, request the complete manufacturer datasheet and validate the exact part before release.

대체품과의 비교

파라미터 이 제품 CD4052B CD4052BM CD4052BE
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand onsemi onsemi onsemi onsemi
Multiplexer Function Dual 4:1 analog multiplexer/demultiplexer Dual 4:1 analog multiplexer/demultiplexer Dual 4:1 analog multiplexer/demultiplexer Dual 4:1 analog multiplexer/demultiplexer
Number of Circuits 2 circuits 2 circuits 2 circuits 2 circuits
On Resistance 240 ohms 240 ohms 240 ohms 240 ohms
Supply Voltage Range 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V
Maximum DC Supply Voltage 18 V 18 V 18 V 18 V
Logic Family CD4000 CMOS CD4000 CMOS CD4000 CMOS CD4000 CMOS

주요 차별점

  • Dual 4:1 analog routing in a single 16-pin SOIC package (vs CD4052B)
  • Wide supply compatibility for 3.3 V, 5 V, and higher-voltage systems (vs CD4052BM)
  • Integrated inhibit control for controlled channel isolation (vs CD4052BE)

설계 노트

The 240-ohm on resistance forms a divider with the source and load impedances. Estimate the insertion loss using the source resistance, 240 ohms, and load resistance, and add a unity-gain buffer when the resulting amplitude error or channel mismatch is excessive. For sensor and audio signals, short traces and a stable ground reference are as important as the nominal on-resistance figure.

Place the supply bypass capacitor as close as practical to the device supply and ground pins, and route analog channel traces away from digital select and inhibit lines. Use the manufacturer pin-description table to confirm pin 1 orientation and the exposed relationships between the common terminals and channel terminals. A consistent, short analog layout reduces parasitic capacitance and improves settling after channel changes.

Do not treat the 18 V absolute maximum supply rating as a design operating point. The CD4052BCM is intended for the CD4000 family supply range of 3 V to 18 V, and input voltages must remain within the specified limits. Also avoid assuming that the inhibit control eliminates analog crosstalk; off-channel leakage and switching transients still depend on the source impedance, load, and surrounding layout.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product listing confirms the onsemi CD4052BCM identity and 16-pin SOIC package. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established from the manufacturer information used for this page.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

CD4052BCM CD4052BCM datasheet CD4052BCM datasheet pdf CD4052BCM pinout CD4052BCM equivalent CD4052BCM replacement CD4052BCM cross reference onsemi CD4052BCM CD4052B 16 pin SOIC multiplexer CD4052BCM dual 4:1 analog switch CD4052BCM 240 ohm on resistance CD4052BCM sensor multiplexer CD4052BCM audio source selection CD4052BCM price CD4052BCM stock

관련 부품 & 용어

onsemi CD4052BCM CD4052B CD4052BM CD4052BE analog multiplexer analog demultiplexer 4:1 analog switch CD4000 CMOS CMOS analog switch 16-pin SOIC SOIC package surface-mount package on resistance 240 ohms select inputs inhibit input analog signal routing sensor multiplexing audio source selection data acquisition precision reference switching 3 V to 18 V supply RoHS REACH AEC-Q100
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기