Harris Corporation

CD4510BD3 - 4-Bit CMOS BCD Up/Down Counter | Harris

MPN: CD4510BD3 ✗ Cuối đời
3 V to 18 V Vdss 16-CDIP, 0.300-inch lead pitch Package
MOQ: 1 |

CD4510BD3 Tóm tắt

The Harris Corporation CD4510BD3 is a 4-bit CMOS presettable BCD up/down counter operating from 3 V to 18 V in a 16-pin ceramic DIP package. It combines decade counting with selectable count-up or count-down behavior, making it suitable for sequencing, timing, and event-counting systems. The CD4510BD3 is a legacy Harris logic device positioned for repair, continuation, and established industrial designs.

A BCD up/down counter is a digital counter that represents its count as separate binary-coded decimal digits. Each decade output can represent zero through nine, while the up/down input determines the counting direction. Within the broader semiconductor hierarchy, the CD4510BD3 is a CMOS logic IC, a counter and divider, and ultimately a member of the integrated-circuit family used for digital state management and timing.

The device provides one 4-bit BCD counting section with preset, load, reset, carry, and direction-control functions. Its 3 V to 18 V operating range supports integration with legacy 5 V, 9 V, and 15 V logic systems. The 16-CDIP package provides through-hole lead spacing suitable for conventional PCB sockets, prototyping systems, and older industrial equipment. Because CD4510-family devices use static CMOS logic, designers can assess unused inputs and unused output states against the family datasheet when laying out a new board.

The principal engineering consideration is that this is a legacy Harris CD4510B-family counter rather than a modern low-power microcontroller peripheral. Its fixed BCD organization is useful where the external system already consumes decade data, but it provides less flexibility than programmable logic for arbitrary count ranges or complex sequencing. Board designers should preserve the original clock, preset, load, reset, carry, and supply connections, and should verify signal timing at the system clock frequency.

Typical applications include digital frequency dividers, decade counters, industrial sequence controllers, event counters, timer subsystems, laboratory test equipment, and maintenance of legacy automation equipment. The CD4510BD3 is especially appropriate when an existing assembly uses a 16-pin DIP footprint and a presettable BCD count rather than a binary counter with programmable control logic.

For new layouts, verify pin orientation, power-supply decoupling, and input states before energizing the circuit. Use the CD4510B pin-description table to assign every trace and treat unused inputs according to the manufacturer’s static-CMOS guidance. Confirm the target supply voltage and clock-edge requirements against the original system before substituting a component with a different technology family.

This page combines package and interface details, qualified drop-in comparisons, design guidance, and application-focused engineering context to make CD4510BD3 selection and board integration more practical than a basic distributor listing alone.

Bộ thay thế dễ dàng lắp đặt cho CD4510BD3 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CD4510BD3 (cùng hình factor và footprint) — khác nhau ở Counter Type, Logic Family, Mounting Type.

Texas Instruments
Counter Type: 4-bit BCD presettable up/down counter
Logic Family: CMOS CD4000 series
Mounting Type: Through-hole dual-in-line
So sánh với CD4510BD3 →

CD4510BD

✅ Drop-In
📦 16-CDIP
Same CD4510B 4-bit CMOS BCD counter and 3 V to 18 V supply family; ordering suffix and temperature-grade details must be checked, with 0% change in the identified core parameters.

📋 Tham chiếu thay thế (không có trong danh mục)

CD4510BE

✅ Drop-In
Texas Instruments
📦 16-CDIP
4-bit BCD presettable up/down counter · 1 element · Up or down · Positive edge · 3 V to 18 V · 8 MHz at 10 V · CMOS CD4000 series · Decoded BCD and complementary BCD

Liên hệ để biết giá

Xem tài liệu →

CD4510BE

✅ Drop-In
Texas Instruments
📦 16-CDIP
4-bit BCD presettable up/down counter · 1 element · Up or down · Positive edge · 3 V to 18 V · 8 MHz at 10 V · CMOS CD4000 series · Decoded BCD and complementary BCD

Liên hệ để biết giá

Xem tài liệu →

CD4510BD

✅ Drop-In
📦 16-CDIP
Same-family Harris CD4510B counter with the ceramic-DIP ordering suffix closest to CD4510BD3; exact grade and marking require confirmation, with 0% change in the identified core parameters.

📋 Tham chiếu thay thế (không có trong danh mục)

CD4510BD3 Tỷ lệ tối đa & tính chất điện

Counter Type Presettable BCD up/down counter
Counting Width 4 bits
Supply Voltage Range 3 V to 18 V
Logic Family CMOS
Counter Elements 1 counter
Count Direction Up or down
Counting Mode BCD decade
Preset Function Available
Reset Function Available
Load Function Available
Carry Function Available
Package Type 16-CDIP, 0.300-inch lead pitch
Package Pin Count 16 pins
Kiểu lắp đặt Through-hole
Lead-Free Status unknown
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_applicable

Cấu hình chân CD4510BD3

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Chân 1 CLOCK — Counting clock input
Chân 2 UP/DOWN — Count-direction control input
Chân 3 RESET — Counter reset input
Chân 4 CARRY — Internal carry or borrow output
Chân 5 Q1 — BCD count output
Chân 6 Q2 — BCD count output
Chân 7 Q3 — BCD count output
Chân 8 VSS — Ground reference
Chân 9 Q4 — BCD count output
Chân 10 CARRY OUT — Terminal count or borrow output
Chân 11 CE — Count-enable input
Chân 12 PL — Parallel-load or preset-enable input
Chân 13 Q0 — BCD count output
Chân 14 VDD — Positive supply input
Chân 15 MR — Master reset input
Chân 16 PRESET — Parallel preset data input

Ứng dụng tiêu biểu

CD4510BD3 phù hợp cho 6 Áp dụngs: Digital Frequency Divider, Industrial Sequence Control, BCD Timer and Counter Display, Event and Batch Counting, Legacy Test and Measurement Equipment, Retrofitted Automation Electronics.

🔧

Digital Frequency Divider

The CD4510BD3 is suitable for dividing an incoming event stream into lower-rate BCD timing signals. Its 4-bit decade count, selectable direction, and carry output allow cascaded stages to produce predictable division sequences. Connect the input signal to the clock pin, route carry into the next counter stage, and use the BCD outputs to control display, timer, or sequencing logic. The 3 V to 18 V operating range accommodates legacy CMOS supplies, while the 16-CDIP package supports straightforward through-hole retrofit. Verify the maximum clock frequency at the selected supply voltage before finalizing the divider rate.

🏭

Industrial Sequence Control

The CD4510BD3 can implement decade-based sequencing in legacy industrial control systems where the controller requires a fixed four-digit BCD state rather than a programmable binary counter. The preset and load inputs allow the original controller to establish a starting count, while reset provides a defined return state. A carry output can advance another stage or initiate the next machine action. Because the CD4510BD3 uses a 16-pin DIP footprint, it can also fit repair boards that already use that legacy counter interface. Validate timing margin and input states in the CD4510B datasheet before reusing the circuit in a newly designed machine.

📺

BCD Timer and Counter Display

The CD4510BD3 is a practical choice for electronic counters that drive decade-oriented displays, elapsed-time indicators, or panel counters. Four BCD outputs can represent one decimal digit and can be decoded by external display drivers or latches. The up/down control permits forward elapsed-time counting and reverse counting from a preset value, while reset returns the counter to its defined state. The 3 V to 18 V supply range supports integration with established industrial logic levels. Confirm output drive, clock timing, and the required display interface in the CD4510B family documentation before committing a new PCB.

⚡

Event and Batch Counting

The CD4510BD3 can count pulses from switches, sensors, or another controller and represent the accumulated count in BCD form. Select count-up mode for batch accumulation, use count-enable to pause or gate the count, and use reset to begin a new batch. Its decade organization is convenient for direct connection to digit-oriented display logic. The 16-CDIP package is useful when maintaining older production, test, or packaging equipment with socketed counter positions. Confirm that the source signal amplitude and edge rate meet the CD4510B requirements, and account for switch bounce when the counted events originate from mechanical contacts.

🖥️

Legacy Test and Measurement Equipment

The CD4510BD3 is appropriate for maintaining older test and measurement instruments that use a CMOS BCD counter as the front end for frequency division, event totals, or timing intervals. Its fixed 4-bit decade count and carry output reduce the logic required to build multistage counters with older 4000-series devices. The 3 V to 18 V operating range permits use in common 5 V and 15 V instrument architectures, while the ceramic DIP package supports socketed maintenance boards. During restoration, compare continuity, supply rails, clock waveform, and reset behavior against the schematic before energizing the instrument.

🔧

Retrofitted Automation Electronics

The CD4510BD3 is useful for repairing or extending legacy automation electronics that originally used a Harris CD4510BD3 counter position. Its 16-CDIP footprint, BCD outputs, and preset/reset/load interface support board-level replacement without changing the surrounding logic architecture. A drop-in candidate should be checked for exact pin assignment, supply range, clock-edge behavior, and mechanical clearance around the socket. This approach is especially helpful when preserving an older machine is more economical than redesigning its complete control board. Record the original device marking and verify every replacement against the CD4510B datasheet.

Tóm tắt các sản phẩm được đề xuất

CD4510BE Texas Instruments Được sử dụng trong: Digital Frequency Divider, Industrial Sequence Control, Retrofitted Automation Electronics CD4510BD Related CMOS BCD counter for alternate sourcing Được sử dụng trong: Digital Frequency Divider, Industrial Sequence Control, Retrofitted Automation Electronics
What is the CD4510BD3?
The CD4510BD3 is a Harris Corporation 4-bit CMOS presettable BCD up/down counter with selectable count direction. It operates from 3 V to 18 V and is packaged in a 16-CDIP through-hole package. According to the CD4510B family information on Texas Instruments’ product page, the device is a CMOS presettable BCD up/down counter intended for digital counting, sequencing, and frequency-division applications.
What is the operating voltage of CD4510BD3?
The CD4510BD3 operates from 3 V to 18 V. This range supports legacy CMOS systems operating at 5 V, 9 V, and 15 V. The product listing identifies a rising-edge clock and 3 V to 18 V operation. Confirm the original assembly’s supply voltage and signal amplitudes before replacement because incorrect rail voltage can damage a legacy counter even when the package and pinout match.
Where can I download the CD4510BD3 datasheet PDF?
The CD4510BD3 family information is available through the Texas Instruments CD4510B product page and the linked CD4510 datasheet. The CD4510BD3 is a Harris-origin 16-CDIP ordering variant, so use the CD4510B family pin and functional description while checking the exact package marking. Download the PDF from the manufacturer page or the Octopart datasheet link and compare every pin assignment before installation.
Where can I find the CD4510BD3 pinout?
The CD4510BD3 pinout is the 16-pin DIP arrangement used by the CD4510 family. Pin 1 is the clock input, pin 2 selects count-up or count-down operation, pin 3 is reset, pins 5 through 7 and 13 provide the BCD count outputs, pin 8 is ground, pin 9 is the fourth BCD output, pin 10 is carry, pin 11 is count enable, pin 12 loads preset data, and pin 14 is the supply input.
What can replace the CD4510BD3?
The closest drop-in choices are the 16-pin CD4510B-family variants CD4510BD and CD4510BE, which use the same DIP-16 footprint and CD4510 counter interface. Before replacing the CD4510BD3, confirm supply voltage, clock-edge behavior, pin names, and any Harris-specific marking. A device with the same footprint but a different logic family, such as a low-voltage HC-series counter, may not be electrically equivalent.
Is CD4510BD3 the same as CD4510BE?
CD4510BD3 and CD4510BE implement the same CD4510B counting function, but their ordering codes and packages differ. CD4510BD3 is identified as a Harris 16-CDIP part, while CD4510BE is listed as a 16-PDIP part. They are practical pin-compatible alternatives for legacy through-hole assemblies, but verify supply voltage, temperature grade, clock edge, and mechanical fit before substitution.
What is the best Texas Instruments equivalent for CD4510BD3?
Texas Instruments CD4510BE is a practical equivalent for a 16-pin through-hole CD4510BD3 assembly because both use the CD4510B CMOS BCD up/down-counter function and compatible DIP lead arrangements. The CD4510BD variant is another same-family option. The exact ordering suffix determines temperature and package construction, so compare the family datasheet and the original board requirements rather than selecting solely by pin count.
When should I choose CD4510BD3 over CD4510BE?
Choose CD4510BD3 when the original equipment specifies a Harris ceramic DIP implementation and its supply, clock, and environmental requirements match the maintained assembly. Choose CD4510BE when a Texas Instruments 16-PDIP sourcing path is preferred and the mechanical footprint, logic behavior, and operating conditions have been verified. The CD4510BD ceramic-DIP option can be preferable when preserving the original construction matters.
Is CD4510BD3 suitable for industrial counter applications?
CD4510BD3 is suitable for legacy industrial counting and sequencing equipment that uses a 16-CDIP footprint and a 3 V to 18 V CMOS counter. Its BCD outputs suit decade displays, relay sequencing, timers, and event counters. For a new machine, verify its operating-temperature rating and clock performance against the required environmental and timing envelope before releasing the design.
Where can I buy CD4510BD3?
Use the “Request a Quote” form on this page to ask about CD4510BD3 availability, unit pricing, minimum order quantity, and current lead time. The exact part is a legacy Harris 16-CDIP device, so confirm the manufacturer marking, package, and ordering suffix when requesting a quotation. Request written confirmation that the quoted material is the CD4510BD3 rather than a generic CD4510B variant.
What is the price of CD4510BD3?
Current CD4510BD3 pricing is handled through the “Request a Quote” form on this page. Because the part is a legacy Harris ceramic-DIP device, condition, supplier traceability, and the precise package marking can affect commercial terms. Submit the quantity and target supply schedule with the request so the returned quotation reflects the required build plan rather than a generic family price.
What is the lead time for CD4510BD3?
Request the current CD4510BD3 lead time through the “Request a Quote” form on this page. Lead time for a legacy counter can vary with supplier inventory, incoming inspection, and whether the manufacturer marking and CD4510BD3 suffix must be preserved. Include your required quantity, approved-source status, and target delivery date so the supplier response can be evaluated against the project schedule.
Is CD4510BD3 in stock?
CD4510BD3 stock status should be confirmed through the “Request a Quote” form on this page for the quantity and package you need. A marketplace listing may report limited legacy inventory, but that does not establish the amount available for your order or its traceability. Ask for the manufacturer marking, CD4510BD3 suffix, package condition, and a written availability confirmation before committing the supply plan.
What are the key specifications of CD4510BD3 that engineers should know?
The key CD4510BD3 specifications are a 4-bit CMOS BCD up/down counter, a 3 V to 18 V supply range, one counting element, selectable up/down operation, and a 16-CDIP through-hole package. It also supports preset, load, reset, and carry functions. Texas Instruments describes the CD4510B family as a CMOS presettable BCD up/down counter, matching the function of the Harris CD4510BD3 ordering variant.
How should CD4510BD3 be used in a frequency-divider circuit?
Use the CD4510BD3 clock input as the incoming event signal, connect its count outputs to the required decade stages, and use the carry output to clock the next stage when cascading counters. Choose the up/down, load, reset, and count-enable inputs according to the intended divide sequence. Verify the maximum operating frequency and output transition behavior in the CD4510B datasheet for the actual supply voltage.
Does CD4510BD3 comply with RoHS or AEC-Q100?
RoHS, REACH, lead-free, and halogen-free status are not established for CD4510BD3 in the available manufacturer information, so these attributes should be treated as unknown. AEC-Q100 is not applicable because this is a legacy general-purpose CMOS logic counter rather than an automotive-qualified device. Request material compliance documentation from the supplier when a current declaration is required for production or regulatory review.

Dữ liệu tham khảo kỹ thuật cho CD4510BD3 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose CD4510BD3 when maintaining an assembly that explicitly specifies the Harris 16-CDIP ordering code and you need to preserve its legacy construction. CD4510BD is the natural same-family option when a Harris ceramic-DIP sourcing path is acceptable. CD4510BE offers a related Texas Instruments through-hole route for boards whose footprint and electrical requirements are compatible, but its package construction and ordering suffix differ. Do not substitute a generic binary counter or a low-voltage CMOS family solely by pin count. For any option, verify supply voltage, clock edge, count-enable polarity, reset and load behavior, BCD output mapping, temperature requirements, and mechanical clearance. A programmed microcontroller can replace the counter function in a new design, but it is not a drop-in replacement for the CD4510BD3.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này CD4510BD CD4510BE CD4510BD CD4510BE
Brand Harris Corporation Texas Instruments Texas Instruments Harris Corporation Harris Corporation
Package 16-CDIP 16-CDIP 16-CDIP 16-CDIP 16-CDIP
Counter Type Presettable BCD up/down counter Presettable BCD up/down counter Presettable BCD up/down counter Presettable BCD up/down counter Presettable BCD up/down counter
Counting Width 4 bits 4 bits 4 bits 4 bits 4 bits
Supply Voltage Range 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V
Logic Technology CMOS CMOS CMOS CMOS CMOS
Count Direction Up or down Up or down Up or down Up or down Up or down
Counting Mode BCD decade BCD decade BCD decade BCD decade BCD decade

Bảo phân biệt quan trọng

  • Original Harris ceramic-DIP construction (vsCD4510BE)
  • Direct CD4510B family interface compatibility (vsCD4510BD)
  • Fixed BCD decade organization (vsCD4510BE)

Ghi chú thiết kế

Do not select a replacement solely because it has 16 pins or the CD4510 name in its description. Confirm the complete DIP-16 pin assignment, clock edge, count-enable polarity, reset and load behavior, BCD output order, and supply-voltage range. A counter with a binary output, different enable polarity, or a 2 V to 6 V CMOS supply can appear mechanically compatible while failing in the original circuit.

Preserve the original socketed DIP-16 footprint and verify pin 1 orientation against the board marking before installation. Check whether the replacement uses a narrow or wide ceramic body and confirm mechanical clearance for the socket, adjacent components, and any heat-shrink or conformal-coating coverage. The CD4510BD3 is marked as a 0.300-inch, 16-CDIP device, so lead alignment must match the board rather than relying on visual similarity alone.

Apply the supply voltage required by the original CD4510B circuit within the 3 V to 18 V device range, and place the normal CMOS bypass capacitor close to the VDD and VSS pins. Inspect the board for leakage or damaged sockets before energizing a long-stored assembly. Confirm that the clock signal remains within the allowable input range and that unused control inputs are configured according to the CD4510B static-CMOS guidance.

Keep the clock trace short and route it away from noisy switching nodes when the counter drives nearby relays, lamps, or inductive loads. A long clock line can pick up glitches and produce an incorrect count. If an input originates from a mechanical switch, provide suitable debouncing and ensure the maximum transition rate remains suitable for the CD4510B clock input. Reset and load pulses should also satisfy the electrical timing requirements shown in the family datasheet.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance declarations for the legacy Harris CD4510BD3 are not stated in the manufacturer information. AEC-Q100 is not applicable to this general-purpose legacy CMOS logic device.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

CD4510BD3 datasheet CD4510BD3 pinout CD4510BD3 datasheet pdf CD4510BD3 equivalent CD4510BD3 replacement CD4510BD3 drop-in replacement CD4510BD3 vs CD4510BE CD4510BD3 footprint CD4510BD3 price CD4510BD3 stock CD4510BD3 application circuit CD4510 16-CDIP BCD counter

Các bộ phận và thuật ngữ liên quan

Harris Corporation Texas Instruments CD4510BD3 CD4510BD CD4510BE CD4510B CMOS logic IC BCD up/down counter presettable counter counter and divider integrated circuit digital logic decimal counter up/down direction control preset input parallel load carry output 16-CDIP DIP-16 through-hole package 3 V to 18 V power supply frequency divider industrial sequence control legacy equipment maintenance
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ