CD4510BD3 - 4-Bit CMOS BCD Up/Down Counter | Harris
MPN: CD4510BD3 ✗ اختتامِ زندگیCD4510BD3 جائزہ
A BCD up/down counter is a digital counter that represents its count as separate binary-coded decimal digits. Each decade output can represent zero through nine, while the up/down input determines the counting direction. Within the broader semiconductor hierarchy, the CD4510BD3 is a CMOS logic IC, a counter and divider, and ultimately a member of the integrated-circuit family used for digital state management and timing.
The device provides one 4-bit BCD counting section with preset, load, reset, carry, and direction-control functions. Its 3 V to 18 V operating range supports integration with legacy 5 V, 9 V, and 15 V logic systems. The 16-CDIP package provides through-hole lead spacing suitable for conventional PCB sockets, prototyping systems, and older industrial equipment. Because CD4510-family devices use static CMOS logic, designers can assess unused inputs and unused output states against the family datasheet when laying out a new board.
The principal engineering consideration is that this is a legacy Harris CD4510B-family counter rather than a modern low-power microcontroller peripheral. Its fixed BCD organization is useful where the external system already consumes decade data, but it provides less flexibility than programmable logic for arbitrary count ranges or complex sequencing. Board designers should preserve the original clock, preset, load, reset, carry, and supply connections, and should verify signal timing at the system clock frequency.
Typical applications include digital frequency dividers, decade counters, industrial sequence controllers, event counters, timer subsystems, laboratory test equipment, and maintenance of legacy automation equipment. The CD4510BD3 is especially appropriate when an existing assembly uses a 16-pin DIP footprint and a presettable BCD count rather than a binary counter with programmable control logic.
For new layouts, verify pin orientation, power-supply decoupling, and input states before energizing the circuit. Use the CD4510B pin-description table to assign every trace and treat unused inputs according to the manufacturer’s static-CMOS guidance. Confirm the target supply voltage and clock-edge requirements against the original system before substituting a component with a different technology family.
This page combines package and interface details, qualified drop-in comparisons, design guidance, and application-focused engineering context to make CD4510BD3 selection and board integration more practical than a basic distributor listing alone.
کے لیے ڈراپ اِن متبادل CD4510BD3 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں CD4510BD3 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Counter Type, Logic Family, Mounting Type.
CD4510BD
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CD4510BE
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →CD4510BE
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →CD4510BD
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CD4510BD3 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Counter Type | Presettable BCD up/down counter |
| Counting Width | 4 bits |
| Supply Voltage Range | 3 V to 18 V |
| Logic Family | CMOS |
| Counter Elements | 1 counter |
| Count Direction | Up or down |
| Counting Mode | BCD decade |
| Preset Function | Available |
| Reset Function | Available |
| Load Function | Available |
| Carry Function | Available |
| Package Type | 16-CDIP, 0.300-inch lead pitch |
| Package Pin Count | 16 pins |
| ماؤنٹنگ ٹائپ | Through-hole |
| Lead-Free Status | unknown |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
CD4510BD3 پن کنفیگریشن
| پن 1 | CLOCK — Counting clock input |
| پن 2 | UP/DOWN — Count-direction control input |
| پن 3 | RESET — Counter reset input |
| پن 4 | CARRY — Internal carry or borrow output |
| پن 5 | Q1 — BCD count output |
| پن 6 | Q2 — BCD count output |
| پن 7 | Q3 — BCD count output |
| پن 8 | VSS — Ground reference |
| پن 9 | Q4 — BCD count output |
| پن 10 | CARRY OUT — Terminal count or borrow output |
| پن 11 | CE — Count-enable input |
| پن 12 | PL — Parallel-load or preset-enable input |
| پن 13 | Q0 — BCD count output |
| پن 14 | VDD — Positive supply input |
| پن 15 | MR — Master reset input |
| پن 16 | PRESET — Parallel preset data input |
عام استعمالات
CD4510BD3 کے لیے موزوں ہے 6 ایپلیکیشنs: Digital Frequency Divider, Industrial Sequence Control, BCD Timer and Counter Display, Event and Batch Counting, Legacy Test and Measurement Equipment, Retrofitted Automation Electronics.
Digital Frequency Divider
The CD4510BD3 is suitable for dividing an incoming event stream into lower-rate BCD timing signals. Its 4-bit decade count, selectable direction, and carry output allow cascaded stages to produce predictable division sequences. Connect the input signal to the clock pin, route carry into the next counter stage, and use the BCD outputs to control display, timer, or sequencing logic. The 3 V to 18 V operating range accommodates legacy CMOS supplies, while the 16-CDIP package supports straightforward through-hole retrofit. Verify the maximum clock frequency at the selected supply voltage before finalizing the divider rate.
تجویز کردہ
Industrial Sequence Control
The CD4510BD3 can implement decade-based sequencing in legacy industrial control systems where the controller requires a fixed four-digit BCD state rather than a programmable binary counter. The preset and load inputs allow the original controller to establish a starting count, while reset provides a defined return state. A carry output can advance another stage or initiate the next machine action. Because the CD4510BD3 uses a 16-pin DIP footprint, it can also fit repair boards that already use that legacy counter interface. Validate timing margin and input states in the CD4510B datasheet before reusing the circuit in a newly designed machine.
تجویز کردہ
BCD Timer and Counter Display
The CD4510BD3 is a practical choice for electronic counters that drive decade-oriented displays, elapsed-time indicators, or panel counters. Four BCD outputs can represent one decimal digit and can be decoded by external display drivers or latches. The up/down control permits forward elapsed-time counting and reverse counting from a preset value, while reset returns the counter to its defined state. The 3 V to 18 V supply range supports integration with established industrial logic levels. Confirm output drive, clock timing, and the required display interface in the CD4510B family documentation before committing a new PCB.
Event and Batch Counting
The CD4510BD3 can count pulses from switches, sensors, or another controller and represent the accumulated count in BCD form. Select count-up mode for batch accumulation, use count-enable to pause or gate the count, and use reset to begin a new batch. Its decade organization is convenient for direct connection to digit-oriented display logic. The 16-CDIP package is useful when maintaining older production, test, or packaging equipment with socketed counter positions. Confirm that the source signal amplitude and edge rate meet the CD4510B requirements, and account for switch bounce when the counted events originate from mechanical contacts.
Legacy Test and Measurement Equipment
The CD4510BD3 is appropriate for maintaining older test and measurement instruments that use a CMOS BCD counter as the front end for frequency division, event totals, or timing intervals. Its fixed 4-bit decade count and carry output reduce the logic required to build multistage counters with older 4000-series devices. The 3 V to 18 V operating range permits use in common 5 V and 15 V instrument architectures, while the ceramic DIP package supports socketed maintenance boards. During restoration, compare continuity, supply rails, clock waveform, and reset behavior against the schematic before energizing the instrument.
Retrofitted Automation Electronics
The CD4510BD3 is useful for repairing or extending legacy automation electronics that originally used a Harris CD4510BD3 counter position. Its 16-CDIP footprint, BCD outputs, and preset/reset/load interface support board-level replacement without changing the surrounding logic architecture. A drop-in candidate should be checked for exact pin assignment, supply range, clock-edge behavior, and mechanical clearance around the socket. This approach is especially helpful when preserving an older machine is more economical than redesigning its complete control board. Record the original device marking and verify every replacement against the CD4510B datasheet.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا CD4510BD3 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | CD4510BD | CD4510BE | CD4510BD | CD4510BE |
|---|---|---|---|---|---|
| Brand | Harris Corporation | Texas Instruments | Texas Instruments | Harris Corporation | Harris Corporation |
| Package | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP |
| Counter Type | Presettable BCD up/down counter | Presettable BCD up/down counter | Presettable BCD up/down counter | Presettable BCD up/down counter | Presettable BCD up/down counter |
| Counting Width | 4 bits | 4 bits | 4 bits | 4 bits | 4 bits |
| Supply Voltage Range | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V |
| Logic Technology | CMOS | CMOS | CMOS | CMOS | CMOS |
| Count Direction | Up or down | Up or down | Up or down | Up or down | Up or down |
| Counting Mode | BCD decade | BCD decade | BCD decade | BCD decade | BCD decade |
اہم امتیازی خصوصیات
- Original Harris ceramic-DIP construction (بمقابلہCD4510BE)
- Direct CD4510B family interface compatibility (بمقابلہCD4510BD)
- Fixed BCD decade organization (بمقابلہCD4510BE)
ڈیزائن نوٹس
Do not select a replacement solely because it has 16 pins or the CD4510 name in its description. Confirm the complete DIP-16 pin assignment, clock edge, count-enable polarity, reset and load behavior, BCD output order, and supply-voltage range. A counter with a binary output, different enable polarity, or a 2 V to 6 V CMOS supply can appear mechanically compatible while failing in the original circuit.
Preserve the original socketed DIP-16 footprint and verify pin 1 orientation against the board marking before installation. Check whether the replacement uses a narrow or wide ceramic body and confirm mechanical clearance for the socket, adjacent components, and any heat-shrink or conformal-coating coverage. The CD4510BD3 is marked as a 0.300-inch, 16-CDIP device, so lead alignment must match the board rather than relying on visual similarity alone.
Apply the supply voltage required by the original CD4510B circuit within the 3 V to 18 V device range, and place the normal CMOS bypass capacitor close to the VDD and VSS pins. Inspect the board for leakage or damaged sockets before energizing a long-stored assembly. Confirm that the clock signal remains within the allowable input range and that unused control inputs are configured according to the CD4510B static-CMOS guidance.
Keep the clock trace short and route it away from noisy switching nodes when the counter drives nearby relays, lamps, or inductive loads. A long clock line can pick up glitches and produce an incorrect count. If an input originates from a mechanical switch, provide suitable debouncing and ensure the maximum transition rate remains suitable for the CD4510B clock input. Reset and load pulses should also satisfy the electrical timing requirements shown in the family datasheet.
تعمیل کی معلومات
Compliance declarations for the legacy Harris CD4510BD3 are not stated in the manufacturer information. AEC-Q100 is not applicable to this general-purpose legacy CMOS logic device.