Harris Corporation

CD4516BD3 - 4-Bit CMOS Up/Down Counter | Harris

MPN: CD4516BD3 ✓ Hoạt động
16-CDIP Package
MOQ: 1 |

CD4516BD3 Tóm tắt

The Harris Corporation CD4516BD3 is a 4-bit CMOS presettable binary up/down counter with one counting element, synchronous operation, positive-edge triggering, and bidirectional counting in a 16-lead CDIP package. It accepts preset and carry inputs for flexible counter-state initialization and provides four binary output signals plus carry and terminal-count functions. The through-hole package is specified as 16-CDIP with a 0.300-inch body width and 7.62 mm lead pitch.

A CMOS binary counter is a sequential logic device that advances a two-state numerical state on each active clock transition. The CD4516 belongs to the broader logic IC hierarchy: counter and divider logic supports binary arithmetic, programmable sequencing, timing, and state control. Its bidirectional architecture allows each count to move upward or downward, making it more versatile than a fixed-direction counter when application logic controls the count direction.

The CD4516BD3 provides a 4-bit counting width, one counter element, synchronous timing, and positive-edge operation. These characteristics are useful for digital systems that need repeatable counting behavior, manually or externally preset starting values, and predictable carry transitions. Its CMOS implementation also places it in the same low-noise digital-logic family commonly used by counters, dividers, frequency measurement, industrial control, and legacy instrumentation equipment.

The counter architecture supports parallel preset loading, asynchronous reset behavior identified for this device family, and separate up/down and carry controls. Synchronous counting means the state advances on the active clock edge rather than asynchronously during the clock transition. Positive-edge triggering provides a defined sampling boundary and can simplify synchronization with surrounding flip-flops, registers, and control logic when reset and preset inputs are managed correctly.

Typical uses include programmable sequence generation, pulse and event counting, frequency division, industrial control modules, laboratory counters, and legacy digital systems. The device can also act as the counting element in a frequency-divider arrangement when a suitable carry-output decoding network is added. In each case, correct operation depends on defining reset, preset, clock, and count-direction timing before connecting external signals.

For new PCB layouts, verify the pin arrangement against the Harris CD4516B datasheet because the CD4516BD3 package is a 16-pin through-hole ceramic DIP rather than a modern surface-mount package. Pay particular attention to the relationship among the clock, reset, preset, parallel load, carry, and count-direction signals. The maximum supply voltage, operating-temperature limits, and detailed electrical limits should be taken directly from the manufacturer documentation before the part is used in new safety-critical or high-reliability equipment.

This product record combines the exact catalog identity, package information, logic characteristics, drop-in replacement analysis, comparison parameters, and practical implementation guidance needed to evaluate the CD4516BD3. The resulting information helps engineers distinguish genuine 16-CDIP alternatives from surface-mount or functionally similar devices that cannot be installed on the original footprint.

Bộ thay thế dễ dàng lắp đặt cho CD4516BD3 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

CD4516B-MIL

✅ Drop-In
📦 16-CDIP
Counter width is 4 bits versus 4 bits, a 0% functional difference; the alternative is a hermetic ceramic DIP military-grade ordering option.

📋 Tham chiếu thay thế (không có trong danh mục)

CD4516BF3A

✅ Drop-In
📦 16-CDIP
Counter width is 4 bits versus 4 bits, a 0% functional difference; the alternative is identified as a 16-lead hermetic ceramic DIP ordering option.

📋 Tham chiếu thay thế (không có trong danh mục)

CD4516BD/3

✅ Drop-In
📦 16-CDIP
Counter width is 4 bits versus 4 bits, a 0% functional difference; the alternate Harris order code uses slash notation for the ceramic DIP configuration.

📋 Tham chiếu thay thế (không có trong danh mục)

CD4516BD3

✅ Drop-In
Harris Corporation
📦 16-CDIP
Binary counter · Up/Down · 1 element · 4 bits · Synchronous · Positive edge · CMOS · 4000/14000/40000 series

Liên hệ để biết giá

Xem tài liệu →

CD4516B-MIL

✅ Drop-In
📦 16-CDIP
Counter width is 4 bits versus 4 bits, a 0% functional difference; this Harris legacy naming identifies the ceramic-DIP military option rather than the D3 suffix ordering code.

📋 Tham chiếu thay thế (không có trong danh mục)

CD4516BD3 Tỷ lệ tối đa & tính chất điện

Counter Type Binary counter
Counting Direction Up/Down
Number of Elements 1 element
Number of Bits per Element 4 bits
Timing Synchronous
Trigger Type Positive edge
Logic Family CMOS
Series 4000/14000/40000 series
Preset Function Presettable
Package Type 16-CDIP
Package Body Width 0.300 inch (7.62 mm)
Kiểu lắp đặt Through hole

Hướng dẫn cấu hình chân CD4516BD3 0.300 inch (7.62 mm)

Cấu hình chân cho CD4516BD3 (0.300 inch (7.62 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 0.300 inch (7.62 mm) cho CD4516BD3

Không có dữ liệu chân cụ thể sẵn có cho CD4516BD3.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

CD4516BD3 phù hợp cho 6 Áp dụngs: Programmable Event Counter, Frequency Divider, Industrial Sequence Controller, Laboratory Pulse Measurement, Legacy Test Equipment, Audio and Timing Control.

🏭

Programmable Event Counter

The CD4516BD3 is suitable for counting discrete events when the system needs a 4-bit state, bidirectional control, and a preset function. Its synchronous positive-edge behavior allows each accepted event to advance the count on a defined clock boundary, while the up/down input can support reversible tallying without changing the counter hardware. The 16-CDIP package is easy to service in legacy panels and industrial fixtures. Designers should debounce mechanical inputs, define reset and preset priority, and verify timing against the Harris CD4516B datasheet before connecting external control logic.

⚡

Frequency Divider

The CD4516BD3 can divide an incoming event stream when a 4-bit count and controllable terminal count are sufficient. Each active clock edge updates the binary state, and the carry-related outputs can be decoded or cascaded to establish longer count intervals. Because the device counts upward and downward, a fixed divider application must actively constrain the direction input to prevent reverse counting after a preset or reset event. For reliable division, check the carry truth table, maximum clock frequency, and output transition behavior in the manufacturer datasheet.

🤖

Industrial Sequence Controller

The CD4516BD3 fits legacy industrial sequence-control circuits that require a programmable binary position and a reliable transition on each positive clock edge. External logic can load a preset value, choose the counting direction, and use carry signals to advance machine steps or timers. The 4-bit counter provides 16 states, which is practical for small sequencers where discrete flip-flops would otherwise be required. Because reset and parallel-load inputs can overlap in legacy designs, their priority must be reviewed carefully and the original Harris timing specification should govern implementation.

🔧

Laboratory Pulse Measurement

The CD4516BD3 can serve as the counting element in laboratory timing and pulse-measurement equipment built around legacy CMOS logic. Its synchronous counter permits orderly updates from a conditioned clock, while the preset function supports repeatable measurement windows and the up/down control can assist with calibration sequences. A 4-bit range limits direct counting to 16 states, so higher ranges require cascaded counter sections or an external divide network. Validate input levels, clock rise and fall times, and reset behavior against the manufacturer electrical characteristics.

🖥️

Legacy Test Equipment

The CD4516BD3 is appropriate for maintaining legacy test equipment that already uses a 16-CDIP presettable counter and cannot accept a surface-mount redesign without board changes. Through-hole construction simplifies socket replacement in older instruments, while the documented 4-bit synchronous architecture supports repeatable state sequencing. Before substituting a variant, compare the complete pin description, supply limits, output drive, and temperature range because identical package dimensions do not guarantee identical electrical grades. Use the Request a Quote form to specify the required grade and quantity.

🎧

Audio and Timing Control

The CD4516BD3 can implement timing intervals, repeat counts, or step-selection logic in legacy audio and control equipment. Its positive-edge counting behavior helps synchronize state changes with a master clock, and the preset capability allows an interval to begin from a defined value rather than zero. The unidirectional counting requirement for a timer can be enforced by holding the direction control in the appropriate state. Designers should account for clock jitter and asynchronous control-input timing, and should consult the CD4516B datasheet for propagation-delay limits and setup requirements.

Tóm tắt các sản phẩm được đề xuất

CD4516B-MIL Hermetic ceramic-DIP counter option for high-reliability legacy instrumentation Được sử dụng trong: Programmable Event Counter, Frequency Divider, Industrial Sequence Controller, Laboratory Pulse Measurement, Audio and Timing Control CD4516BD/3 Harris ceramic-DIP ordering option with the same 16-lead architecture Được sử dụng trong: Programmable Event Counter, Industrial Sequence Controller, Legacy Test Equipment CD4516 Base family designation for CMOS presettable up/down counter designs Được sử dụng trong: Frequency Divider, Audio and Timing Control CD4516BF3A Texas Instruments hermetic ceramic-DIP option for laboratory timing modules Được sử dụng trong: Laboratory Pulse Measurement CD4516BD3 Harris Corporation Được sử dụng trong: Legacy Test Equipment
What is the CD4516BD3?
The CD4516BD3 is a 4-bit CMOS presettable binary up/down counter with one counting element. According to the Harris CD4516B datasheet, the device operates synchronously on the positive clock edge, supports bidirectional counting, and is offered in a 16-lead CDIP package. It is primarily intended for legacy digital control, sequencing, timing, and frequency-division systems.
What is the operating voltage of CD4516BD3?
The CD4516BD3 operating voltage is specified by the manufacturer according to the Harris CD4516B datasheet and its supply-voltage classification. Before connecting this legacy CMOS counter to a new circuit, confirm the exact voltage range, input thresholds, and output levels for the intended temperature grade. Refer to the manufacturer datasheet pin and electrical-characteristics tables when designing the supply rail.
What is the CD4516BD3 package and pin count?
The CD4516BD3 is packaged as a 16-lead CDIP with a 0.300-inch body width and 7.62 mm lead pitch. The through-hole package distinguishes it from CD4516B versions supplied in small-outline or thin-shrink packages. Use the pin-description table and package drawing in the Harris CD4516B datasheet when assigning PCB connections or checking socket orientation.
How does the CD4516BD3 count up and down?
The CD4516BD3 advances or reverses its 4-bit count according to its count-direction control while synchronously updating on the positive clock edge. One counter element provides 16 binary states, from 0000 through 1111. The Harris CD4516B datasheet should be consulted for the exact truth table because preset, reset, carry, and direction interactions determine the final state.
Where can I download the CD4516BD3 datasheet PDF?
The CD4516BD3 documentation is available through the CD4516B family datasheet linked on this page. The family document describes the CMOS presettable up/down counter, while the manufacturer or distributor component listing identifies CD4516BD3 as the 16-CDIP Harris orderable. Check the package drawing and pin table carefully before using the PDF with a different CD4516B package option.
Where can I find the CD4516BD3 pinout?
The CD4516BD3 pinout is found in the Harris CD4516B datasheet under the pin-description and functional-diagram sections for the 16-lead CDIP option. The package drawing identifies pin 1 and the counter-terminal numbering. Because no separate CD4516BD3 pin table is published in the product listing, use the family datasheet and confirm that the selected ordering code uses the ceramic DIP configuration.
Is the CD4516BD3 a drop-in replacement for CD4516B?
The CD4516BD3 can replace a CD4516B variant only when that alternative uses the same 16-CDIP footprint, pin arrangement, electrical limits, and operating-temperature grade. The CD4516B-MIL and CD4516BF3A ceramic-package options preserve the 16-lead DIP form factor, but temperature grade and qualification still require verification. Do not substitute CD4516B surface-mount packages without changing the PCB.
What is the best Texas Instruments equivalent for CD4516BD3?
The closest Texas Instruments form-factor option identified for a CD4516BD3 replacement is the CD4516B-MIL, a 16-lead hermetic ceramic DIP version of the same CD4516B counter family. It preserves the 4-bit bidirectional counting architecture and 16-lead through-hole geometry. Confirm pin compatibility, operating-temperature limits, and military qualification requirements against the manufacturer datasheet before substitution.
What can replace CD4516BD3?
A genuine drop-in replacement must be a 16-lead CDIP counter with the same pin functions, 4-bit width, synchronous positive-edge behavior, and compatible electrical limits. CD4516B-MIL and CD4516BF3A are the closest Harris-family and Texas Instruments ceramic-DIP candidates identified, while CD4516BD/3 is another documented Harris orderable. Each candidate must be checked for temperature grade and qualification rather than package shape alone.
CD4516BD3 vs CD4516B-MIL: which is better?
Choose CD4516BD3 when a legacy Harris 16-CDIP ordering code is required, and choose CD4516B-MIL when a Texas Instruments-sourced hermetic ceramic DIP alternative is preferable for a military or high-reliability design. Both retain the 4-bit CMOS up/down-counter architecture, but temperature range, qualification, marking, and sourcing conditions can differ. The exact manufacturer grade tables determine which is appropriate.
When should I choose CD4516BD3 over another 4-bit counter?
Choose CD4516BD3 when an existing 16-CDIP board requires a bidirectional, presettable 4-bit synchronous counter and the original Harris orderable is preferred. Choose a different standard logic counter only when its pinout, count width, voltage limits, and timing characteristics preserve the original system behavior. Legacy systems with soldered sockets may benefit from a documented ceramic DIP source, but every substitution still requires schematic-level verification.
Is CD4516BD3 suitable for industrial counter applications?
The CD4516BD3 can be used in legacy industrial counter and sequencing circuits when its manufacturer-specified supply voltage and temperature range cover the operating environment. Its 4-bit width, positive-edge clocking, preset capability, and bidirectional counting support event counting and programmable state machines. For new safety-related or long-life industrial equipment, verify environmental compliance and qualification rather than assuming suitability.
What are the key specifications of CD4516BD3 that engineers should know?
The key CD4516BD3 specifications are 4 counting bits, one counter element, up/down direction control, synchronous positive-edge operation, CMOS logic, and a 16-lead CDIP package with 7.62 mm lead pitch. These characteristics define its use as a legacy programmable counter or divider element. Supply limits, electrical thresholds, and temperature limits should be taken from the Harris CD4516B datasheet for the exact qualification option.
Where to buy CD4516BD3 online?
Use the Request a Quote form on this page to request CD4516BD3 availability, current commercial terms, and lead time for the 16-CDIP package. The listing identifies a current unit in stock, but stock levels can change without notice. Confirm the exact Harris ordering code, package marking, and quantity requirements before placing an order.
What is the price and lead time of CD4516BD3?
Submit a CD4516BD3 request through the Request a Quote form on this page for current pricing, stock confirmation, and lead time. The 16-CDIP part is offered with no stated minimum order quantity by a current listing, but availability and production status should be reconfirmed for the intended quantity. Quote requests also let you specify inspection, packaging, and traceability requirements.

Dữ liệu tham khảo kỹ thuật cho CD4516BD3 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose CD4516BD3 when maintaining a Harris-based legacy board that requires the original 16-CDIP ordering code and a 4-bit synchronous, presettable up/down counter. CD4516B-MIL is attractive when a Texas Instruments hermetic ceramic-DIP family part is preferred, especially for equipment with an established military-qualification requirement. CD4516BF3A provides another documented ceramic-DIP form factor, while CD4516BD/3 can help teams reconcile Harris legacy slash notation with the D3 ordering code. None of these choices should be based on package shape alone: compare the supply range, logic thresholds, propagation delays, temperature limits, reset and preset truth table, and qualification marking. Surface-mount CD4516B versions are not drop-in choices for an existing CDIP footprint. For a new design, a modern counter may offer smaller size and better characterization, but CD4516BD3 remains practical when maintaining an existing 16-pin socketed design and minimizing wiring changes are the priorities.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này CD4516B-MIL CD4516BF3A CD4516BD/3 CD4516BD3
Brand Harris Corporation Texas Instruments Texas Instruments Harris Corporation Radio Corporation of America
Package 16-CDIP (0.300 inch, 7.62 mm) 16-CDIP 16-CDIP 16-CDIP 16-CDIP (0.300 inch, 7.62 mm)
Counter Type Binary counter Binary counter Binary counter Binary counter Binary counter
Number of Bits 4 bits 4 bits 4 bits 4 bits 4 bits
Counting Direction Up/Down Up/Down Up/Down Up/Down Up/Down
Timing Synchronous Synchronous Synchronous Synchronous Synchronous
Trigger Type Positive edge Positive edge Positive edge Positive edge Positive edge
Logic Family CMOS CMOS CMOS CMOS CMOS
Number of Elements 1 element 1 element 1 element 1 element 1 element
Mounting Type Through hole Through hole Through hole Through hole Through hole

Bảo phân biệt quan trọng

  • Maintains the original 4-bit bidirectional counter architecture (vsCD4516B-MIL)
  • Preserves the 16-CDIP through-hole footprint (vsCD4516BF3A)
  • Supports legacy service and replacement flexibility (vsCD4516BD/3)
  • Provides bidirectional counting in a presettable CMOS counter (vsCD4516BD3)

Ghi chú thiết kế

Do not assume that every CD4516B ordering code is mechanically interchangeable. The family includes 16-lead plastic DIP, small-outline, thin-shrink, and hermetic ceramic packages, while CD4516BD3 specifically corresponds to a 16-CDIP with 7.62 mm lead pitch. Confirm the package drawing, pin 1 orientation, and the complete pin-description table before inserting a ceramic alternative into a socket or soldering it into an existing through-hole footprint.

Synchronous counting does not make every input safe to change arbitrarily near the clock edge. Reset, parallel preset, load-enable, and count-direction signals should satisfy the setup and hold requirements stated in the Harris CD4516B datasheet. Synchronize external control transitions away from the active clock edge, and ensure a mechanical switch or asynchronous sensor signal is debounced before it reaches a counter input.

Legacy CMOS counter inputs can pass through an indeterminate voltage region when a floating control pin is partially driven. Tie every unused input to a defined valid logic level rather than leaving preset, reset, load, or direction pins floating. Use the manufacturer-specified supply voltage and input-level limits to select compatible pull-up or pull-down resistors, and account for power-supply decoupling required by the family datasheet.

For a legacy repair, maintain the original 0.300-inch body width and 7.62 mm lead pitch, but verify the actual row spacing and socket type from the board footprint. A 16-CDIP package can be described by body width and lead pitch while still differing in row spacing or lead geometry across families. Confirm that the replacement clears adjacent components and that no socket or heat-transfer hardware assumes a specific ceramic package height.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The CD4516BD3 is a legacy Harris CMOS logic IC in a 16-CDIP package. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status are not stated in the manufacturer information available for this ordering code.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

cd4516b datasheet CD4516BD3 datasheet CD4516BD3 datasheet pdf CD4516BD3 pinout CD4516BD3 equivalent CD4516BD3 replacement CD4516BD3 drop-in replacement CD4516BD3 vs CD4516B-MIL CD4516BD3 16-CDIP CD4516BD3 price CD4516BD3 stock Harris CD4516BD3

Các bộ phận và thuật ngữ liên quan

Harris Corporation CD4516BD3 CD4516B CD4516B-MIL CD4516BF3A CD4516BD/3 Texas Instruments Radio Corporation of America CMOS binary counter up/down counter presettable counter synchronous counter positive-edge triggering counter and divider logic logic IC digital counter frequency divider programmable sequence generator 16-CDIP ceramic dual in-line package through-hole mounting parallel preset asynchronous reset carry output
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ