CD4516BD3 - 4-Bit CMOS Up/Down Counter | Harris
부품 번호: CD4516BD3 ✓ 활성CD4516BD3 개요
A CMOS binary counter is a sequential logic device that advances a two-state numerical state on each active clock transition. The CD4516 belongs to the broader logic IC hierarchy: counter and divider logic supports binary arithmetic, programmable sequencing, timing, and state control. Its bidirectional architecture allows each count to move upward or downward, making it more versatile than a fixed-direction counter when application logic controls the count direction.
The CD4516BD3 provides a 4-bit counting width, one counter element, synchronous timing, and positive-edge operation. These characteristics are useful for digital systems that need repeatable counting behavior, manually or externally preset starting values, and predictable carry transitions. Its CMOS implementation also places it in the same low-noise digital-logic family commonly used by counters, dividers, frequency measurement, industrial control, and legacy instrumentation equipment.
The counter architecture supports parallel preset loading, asynchronous reset behavior identified for this device family, and separate up/down and carry controls. Synchronous counting means the state advances on the active clock edge rather than asynchronously during the clock transition. Positive-edge triggering provides a defined sampling boundary and can simplify synchronization with surrounding flip-flops, registers, and control logic when reset and preset inputs are managed correctly.
Typical uses include programmable sequence generation, pulse and event counting, frequency division, industrial control modules, laboratory counters, and legacy digital systems. The device can also act as the counting element in a frequency-divider arrangement when a suitable carry-output decoding network is added. In each case, correct operation depends on defining reset, preset, clock, and count-direction timing before connecting external signals.
For new PCB layouts, verify the pin arrangement against the Harris CD4516B datasheet because the CD4516BD3 package is a 16-pin through-hole ceramic DIP rather than a modern surface-mount package. Pay particular attention to the relationship among the clock, reset, preset, parallel load, carry, and count-direction signals. The maximum supply voltage, operating-temperature limits, and detailed electrical limits should be taken directly from the manufacturer documentation before the part is used in new safety-critical or high-reliability equipment.
This product record combines the exact catalog identity, package information, logic characteristics, drop-in replacement analysis, comparison parameters, and practical implementation guidance needed to evaluate the CD4516BD3. The resulting information helps engineers distinguish genuine 16-CDIP alternatives from surface-mount or functionally similar devices that cannot be installed on the original footprint.
드롭인 대체품: CD4516BD3 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
CD4516B-MIL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4516BF3A
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4516BD/3
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4516BD3
✅ 드롭인가격 문의
데이터시트 보기 →CD4516B-MIL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4516BD3 최대 정격 & 전기적 특성
| Counter Type | Binary counter |
| Counting Direction | Up/Down |
| Number of Elements | 1 element |
| Number of Bits per Element | 4 bits |
| Timing | Synchronous |
| Trigger Type | Positive edge |
| Logic Family | CMOS |
| Series | 4000/14000/40000 series |
| Preset Function | Presettable |
| Package Type | 16-CDIP |
| Package Body Width | 0.300 inch (7.62 mm) |
| 실장 유형 | Through hole |
CD4516BD3 0.300 inch (7.62 mm) 핀 구성 가이드
CD4516BD3(0.300 inch (7.62 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CD4516BD3.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CD4516BD3 적합 용도: 6 애플리케이션s: Programmable Event Counter, Frequency Divider, Industrial Sequence Controller, Laboratory Pulse Measurement, Legacy Test Equipment, Audio and Timing Control.
Programmable Event Counter
The CD4516BD3 is suitable for counting discrete events when the system needs a 4-bit state, bidirectional control, and a preset function. Its synchronous positive-edge behavior allows each accepted event to advance the count on a defined clock boundary, while the up/down input can support reversible tallying without changing the counter hardware. The 16-CDIP package is easy to service in legacy panels and industrial fixtures. Designers should debounce mechanical inputs, define reset and preset priority, and verify timing against the Harris CD4516B datasheet before connecting external control logic.
추천
Frequency Divider
The CD4516BD3 can divide an incoming event stream when a 4-bit count and controllable terminal count are sufficient. Each active clock edge updates the binary state, and the carry-related outputs can be decoded or cascaded to establish longer count intervals. Because the device counts upward and downward, a fixed divider application must actively constrain the direction input to prevent reverse counting after a preset or reset event. For reliable division, check the carry truth table, maximum clock frequency, and output transition behavior in the manufacturer datasheet.
추천
Industrial Sequence Controller
The CD4516BD3 fits legacy industrial sequence-control circuits that require a programmable binary position and a reliable transition on each positive clock edge. External logic can load a preset value, choose the counting direction, and use carry signals to advance machine steps or timers. The 4-bit counter provides 16 states, which is practical for small sequencers where discrete flip-flops would otherwise be required. Because reset and parallel-load inputs can overlap in legacy designs, their priority must be reviewed carefully and the original Harris timing specification should govern implementation.
추천
Laboratory Pulse Measurement
The CD4516BD3 can serve as the counting element in laboratory timing and pulse-measurement equipment built around legacy CMOS logic. Its synchronous counter permits orderly updates from a conditioned clock, while the preset function supports repeatable measurement windows and the up/down control can assist with calibration sequences. A 4-bit range limits direct counting to 16 states, so higher ranges require cascaded counter sections or an external divide network. Validate input levels, clock rise and fall times, and reset behavior against the manufacturer electrical characteristics.
추천
Legacy Test Equipment
The CD4516BD3 is appropriate for maintaining legacy test equipment that already uses a 16-CDIP presettable counter and cannot accept a surface-mount redesign without board changes. Through-hole construction simplifies socket replacement in older instruments, while the documented 4-bit synchronous architecture supports repeatable state sequencing. Before substituting a variant, compare the complete pin description, supply limits, output drive, and temperature range because identical package dimensions do not guarantee identical electrical grades. Use the Request a Quote form to specify the required grade and quantity.
추천
Audio and Timing Control
The CD4516BD3 can implement timing intervals, repeat counts, or step-selection logic in legacy audio and control equipment. Its positive-edge counting behavior helps synchronize state changes with a master clock, and the preset capability allows an interval to begin from a defined value rather than zero. The unidirectional counting requirement for a timer can be enforced by holding the direction control in the appropriate state. Designers should account for clock jitter and asynchronous control-input timing, and should consult the CD4516B datasheet for propagation-delay limits and setup requirements.
추천
추천 제품 요약
엔지니어링 참조 데이터: CD4516BD3 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CD4516B-MIL | CD4516BF3A | CD4516BD/3 | CD4516BD3 |
|---|---|---|---|---|---|
| Brand | Harris Corporation | Texas Instruments | Texas Instruments | Harris Corporation | Radio Corporation of America |
| Package | 16-CDIP (0.300 inch, 7.62 mm) | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP (0.300 inch, 7.62 mm) |
| Counter Type | Binary counter | Binary counter | Binary counter | Binary counter | Binary counter |
| Number of Bits | 4 bits | 4 bits | 4 bits | 4 bits | 4 bits |
| Counting Direction | Up/Down | Up/Down | Up/Down | Up/Down | Up/Down |
| Timing | Synchronous | Synchronous | Synchronous | Synchronous | Synchronous |
| Trigger Type | Positive edge | Positive edge | Positive edge | Positive edge | Positive edge |
| Logic Family | CMOS | CMOS | CMOS | CMOS | CMOS |
| Number of Elements | 1 element | 1 element | 1 element | 1 element | 1 element |
| Mounting Type | Through hole | Through hole | Through hole | Through hole | Through hole |
주요 차별점
- Maintains the original 4-bit bidirectional counter architecture (vs CD4516B-MIL)
- Preserves the 16-CDIP through-hole footprint (vs CD4516BF3A)
- Supports legacy service and replacement flexibility (vs CD4516BD/3)
- Provides bidirectional counting in a presettable CMOS counter (vs CD4516BD3)
설계 노트
Do not assume that every CD4516B ordering code is mechanically interchangeable. The family includes 16-lead plastic DIP, small-outline, thin-shrink, and hermetic ceramic packages, while CD4516BD3 specifically corresponds to a 16-CDIP with 7.62 mm lead pitch. Confirm the package drawing, pin 1 orientation, and the complete pin-description table before inserting a ceramic alternative into a socket or soldering it into an existing through-hole footprint.
Synchronous counting does not make every input safe to change arbitrarily near the clock edge. Reset, parallel preset, load-enable, and count-direction signals should satisfy the setup and hold requirements stated in the Harris CD4516B datasheet. Synchronize external control transitions away from the active clock edge, and ensure a mechanical switch or asynchronous sensor signal is debounced before it reaches a counter input.
Legacy CMOS counter inputs can pass through an indeterminate voltage region when a floating control pin is partially driven. Tie every unused input to a defined valid logic level rather than leaving preset, reset, load, or direction pins floating. Use the manufacturer-specified supply voltage and input-level limits to select compatible pull-up or pull-down resistors, and account for power-supply decoupling required by the family datasheet.
For a legacy repair, maintain the original 0.300-inch body width and 7.62 mm lead pitch, but verify the actual row spacing and socket type from the board footprint. A 16-CDIP package can be described by body width and lead pitch while still differing in row spacing or lead geometry across families. Confirm that the replacement clears adjacent components and that no socket or heat-transfer hardware assumes a specific ceramic package height.
규정 준수 정보
The CD4516BD3 is a legacy Harris CMOS logic IC in a 16-CDIP package. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status are not stated in the manufacturer information available for this ordering code.