CD4518BM - Dual 4-Bit BCD Up-Counter | Texas Instruments
MPN: CD4518BM ✓ Hoạt độngCD4518BM Tóm tắt
A BCD counter is a digital counter that represents each decimal digit with four binary bits, providing a natural interface for display and decimal sequencing systems. The CD4518BM belongs to the CMOS logic family and operates from a single supply, making it useful in legacy-compatible control systems, test equipment, timers, and embedded instrumentation. Each counter section is internally synchronous and can operate from either its positive or negative clock input, allowing different edge-sensitive counting arrangements within one circuit.
The key electrical characteristics include a 16-lead SOIC package, operation from 3.3 V, 5 V, 9 V, 12 V, or 15 V typical supply configurations, and a specified operating temperature range from -55 °C to 125 °C. The counter outputs are buffered, while the clock and reset inputs provide the control functions needed for event counting and system initialization. The CD4518BM is not a binary counter; applications requiring binary counting rather than BCD counting should use the CD4520 family instead.
Typical implementations include decade sequencing for multiplexed displays, pulse counting in control systems, timing dividers, batch and event counters, and logic in older industrial equipment. Because the device contains two counter sections, it is especially useful when one circuit needs to count two related events or generate two independent divided outputs. The manufacturer product page identifies the part as a CMOS dual BCD up-counter, while distributor listings identify the CD4518BM ordering code as a 16-pin SOIC device.
When designing around the CD4518BM, verify the clock edge requirements and ensure unused counter sections are properly initialized. Supply bypassing should be placed close to the device, and signal traces should be kept short because the CMOS inputs are sensitive to leakage and noise. The pin assignment and electrical limits should be taken from the manufacturer datasheet before laying out the PCB. This page combines the manufacturer product information with distributor package data, replacement guidance, and practical design considerations for engineers evaluating the CD4518BM in a new or existing design.
Bộ thay thế dễ dàng lắp đặt cho CD4518BM — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
CD4518BNSR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
HEF4518BP
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC14518BDW
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CD4518BM Tỷ lệ tối đa & tính chất điện
| Product Type | CMOS dual BCD up-counter |
| Counter Configuration | 2 independent 4-bit BCD counters |
| Counting Direction | Up-count |
| Điện áp cung cấp | 3.3 V, 5 V, 9 V, 12 V, or 15 V typical |
| Khoảng nhiệt độ hoạt động | -55 °C to 125 °C |
| Hộp | 16-lead SOIC (D) |
| Số lượng chân | 16 pins |
| Logic Family | CMOS |
| Clock Inputs | Positive-edge and negative-edge inputs per counter |
| Master Reset | Active-high asynchronous reset |
| Kiểu đầu ra | Buffered decade outputs |
| Output Count | 4-bit BCD output per counter |
| Internal Synchronism | Internally synchronous 4-stage counters |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân CD4518BM 16-lead soic (d)
Cấu hình chân cho CD4518BM (16-lead soic (d) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CD4518BM.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CD4518BM phù hợp cho 6 Áp dụngs: Multiplexed Decimal Display Sequencing, Industrial Event Counting, Frequency Divider and Timer, Batch and Recipe Sequencing, Digital Test Equipment, Legacy Control Logic Retrofit.
Multiplexed Decimal Display Sequencing
The CD4518BM is suitable for driving decimal digit sequencing in multiplexed seven-segment displays because each counter section provides four BCD outputs for one decimal digit. Use one section for the digit count and the other for a related event or timing count. The active-high asynchronous master reset gives the display subsystem a defined startup state, while the buffered outputs provide a clean interface to decoder logic. The BCD output format avoids conversion circuitry that would otherwise be required with a binary counter. Before finalizing the design, verify the output levels, propagation delays, and reset timing in the manufacturer datasheet, and account for display blanking and refresh timing in the surrounding controller.
Được đề xuất
Industrial Event Counting
The CD4518BM can count two related events in industrial control and test equipment when the system needs decimal event totals rather than binary arithmetic. Each internally synchronous four-stage counter accepts a selectable positive-edge or negative-edge clock, allowing the two channels to follow different timing relationships while sharing one package. The active-high master reset supports deterministic initialization between production cycles or test runs. Its two counter sections reduce component count compared with separate single-counter packages. Confirm the maximum clock frequency, reset pulse width, supply tolerance, and environmental limits in the manufacturer datasheet before using the part in high-speed or safety-related equipment.
Được đề xuất
Frequency Divider and Timer
The CD4518BM can implement a decimal frequency divider or low-rate timer when a clock must be reduced into ten-based increments. Each four-bit BCD section divides the selected clock input into decade steps, which is useful for generating controlled timing intervals, delayed enables, or stepped sequence controls. The two-counter architecture permits two related timing divisions in one package. For a divider, calculate the output frequency from the selected clock and counter stage, then verify propagation delay, output rise and fall time, and reset recovery against the circuit timing budget. The manufacturer's timing table should be used for design sign-off.
Được đề xuất
Batch and Recipe Sequencing
The CD4518BM can support batch counting and recipe sequencing in process-control equipment where decimal positions correspond directly to operational steps. One counter tracks batches or stages, while the second tracks events within the current cycle. The BCD outputs can be decoded into control lines for actuators, indicators, or data-capture logic, and the master reset provides a convenient cycle-start boundary. Designers should define whether the counter advances on the rising or falling clock edge and should ensure that reset deassertion cannot create an unintended count. Validate noise margins, unused-input states, and power-up behavior in the target system using the manufacturer datasheet.
Được đề xuất
Digital Test Equipment
The CD4518BM is useful in digital test equipment for counting test vectors, measurement intervals, or repeated stimulus events while retaining a decimal representation for operator display. The two independent counter sections can track two related quantities, such as completed steps and accumulated errors, without requiring two separate counter ICs. Buffered outputs help preserve signal integrity at moderate logic levels, while the two clock edges provide flexibility in synchronizing to external test events. The design must still account for input leakage, clock fan-out, settling time, and reset behavior. Use the manufacturer datasheet to establish operating margins at the intended supply voltage and temperature.
Được đề xuất
Legacy Control Logic Retrofit
The CD4518BM can be used to retrofit older CMOS control systems that originally used discrete decade counters or dual-counter logic packages. Its two BCD counter sections preserve a conventional 4-bit decimal interface, making it easier to retain existing display and sequencing wiring. The SOIC-16 package supports surface-mount assembly while maintaining the same general logic organization as the established CD4518 family. During a retrofit, check legacy supply voltage, clock-edge assumptions, reset polarity, fan-out, and any long signal traces. Use the official manufacturer documentation to confirm pin functions and electrical limits, and verify every connected output for safe states during power-up and reset.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CD4518BM — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CD4518BNSR | HEF4518BP | MC14518BDW |
|---|---|---|---|---|
| Package | SOIC-16 (D) | SOIC-16 (D) | SOIC-16 | SOIC-16 (D) |
| Brand | Texas Instruments | Texas Instruments | Nexperia | onsemi |
| Counter Type | Dual 4-bit BCD up-counter | Dual 4-bit BCD up-counter | Dual 4-bit BCD counter | Dual 4-bit BCD counter |
| Number of Counter Elements | 2 | 2 | 2 | 2 |
| Counting Encoding | BCD | BCD | BCD | BCD |
| Special Features | Two internally synchronous 4-stage counters | Same CD4518B family | Buffered four-position outputs | Dual internally synchronous BCD counter |
Bảo phân biệt quan trọng
- Dual BCD counter in a single 16-SOIC package (vsMC14518BDW)
- CD4518B family continuity (vsHEF4518BP)
- Two clock-edge options per counter section (vsCD4518BNSR)
Ghi chú thiết kế
The CD4518BM counts in BCD, not binary, so choose it only when the surrounding logic expects decade output. Verify the selected positive-edge or negative-edge clock input for each counter section and confirm the active-high master reset polarity. If a replacement is being considered, check reset timing and clock recovery/removal requirements because identical pin names do not guarantee identical timing margins.
Place the decoupling capacitor close to the supply and ground pins, and route clock, reset, and counter-output nets away from noisy switching nodes. The two counter sections are independent, so unused inputs should be tied to defined levels rather than left floating. Maintain adequate ground-return paths and use the manufacturer pinout when assigning the 16 SOIC leads.
Treat clock and reset nets as control signals with defined rise and fall times. Avoid long PCB traces near high-current switching paths, and check the load presented by the following CMOS logic. If the reset is driven by another counter or asynchronous test equipment, confirm that reset release cannot create an unintended clock edge. Use the datasheet timing characteristics when calculating setup, hold, and recovery margins.
Thông tin tuân thủ
The verified excerpts identify the Texas Instruments CD4518B family and distributor inventory, but do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. These fields remain unknown rather than inferred from the manufacturer name or legacy technology.