Texas Instruments

CD4520BM - 4-Bit CMOS Dual Binary Up-Counter | Texas Instruments

MPN: CD4520BM ✓ Hoạt động
16-SOIC Package Positive-going or negative-going transition Speed
MOQ: 1 |

CD4520BM Tóm tắt

The Texas Instruments CD4520BM is a CMOS dual binary up-counter with two identical, internally synchronous 4-stage counter sections in a 16-pin SOIC package. The device is intended for digital counting, frequency division, timing, and sequential control applications. Each counter uses D-type flip-flop stages, allowing incrementing on either the positive-going or negative-going clock transition when the corresponding clock and enable lines are arranged for the required operation.

A binary counter is a digital logic component that tracks a binary count through successive clock events. The CD4520BM belongs to the CMOS logic family and provides two counter elements in one package, allowing one device to implement two related counting functions when the application requires them. Its binary counting structure is distinct from a BCD counter, so the output encoding should be checked against the intended system format before substitution.

The primary design features visible in the manufacturer and distributor records are the dual-counter organization, four-stage binary count capacity, CMOS logic family, and 16-SOIC package. The manufacturer identifies CD4520B as a CMOS Dual Binary Up-Counter, while the distributor listing describes CD4520BM as a two-element, 4-bit, positive/negative counter in a 16-SOIC package. The M suffix indicates the leaded 16-pin SOIC ordering variant listed by Texas Instruments.

The CD4520BM can be used as a frequency divider, event counter, programmable timing element, digital sequencer, or general-purpose logic building block. In frequency-divider applications, the counter state can be monitored and decoded to produce a lower-frequency signal derived from an incoming clock. In sequencing applications, the binary output can be decoded by external logic to create ordered control steps.

For a new design, the clock, reset, enable, supply, and output behavior should be confirmed against the manufacturer datasheet and its operating limits. The exact operating voltage range, timing ratings, input and output levels, quiescent current, temperature range, and absolute maximum ratings are not established by the retrieved manufacturer and distributor records, so they must be checked against the official datasheet before qualification. The Request a Quote form on this page can be used for current commercial inquiry, including availability and lead time.

This page combines the manufacturer product record, distributor identification, package information, practical application guidance, and a conservative replacement analysis. The alternatives are limited to parts that can be identified from the retrieved cross-reference information without assuming unverified electrical or pin-level equivalence.

Bộ thay thế dễ dàng lắp đặt cho CD4520BM — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

CD4520BM96

✅ Drop-In
📦 16-SOIC
Same CD4520B 4-bit dual-counter function and 16-SOIC footprint; ordering suffix differs only in tape-and-reel packaging, with 0% functional parameter difference

📋 Tham chiếu thay thế (không có trong danh mục)

CD4520BM

✅ Drop-In
Texas Instruments
📦 16-SOIC
CMOS dual binary up-counter · 2 elements · 4 stages per counter · Binary · 4 bit · CMOS · Up counter · Positive-going or negative-going transition

Liên hệ để biết giá

Xem tài liệu →

CD4520BM Tỷ lệ tối đa & tính chất điện

Product Type CMOS dual binary up-counter
Counter Elements 2 elements
Counter Stage Count 4 stages per counter
Count Format Binary
Counter Width 4 bit
Logic Family CMOS
Counting Direction Up counter
Clock Edge Support Positive-going or negative-going transition
Internal Synchronization Synchronous
Hộp 16-SOIC
Số chân 16 pins
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân CD4520BM 16-soic

Cấu hình chân cho CD4520BM (16-soic gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 16-soic cho CD4520BM

Không có dữ liệu chân cụ thể sẵn có cho CD4520BM.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

CD4520BM phù hợp cho 6 Áp dụngs: Frequency Divider, Digital Event Counter, Digital Sequencer, Timing and Delay Generation, Instrumentation and Measurement, Consumer and Industrial Control.

⚡

Frequency Divider

The CD4520BM can divide an incoming clock because each section provides four internally synchronous binary stages. A designer can use one counter to derive a lower-frequency signal and the second section for another division or timing function. The confirmed device characteristics are 2 elements, 4 stages per element, and selectable positive-going or negative-going counting. Before finalizing the circuit, verify the family’s maximum operating frequency, reset behavior, output timing, and supply-voltage limits in the official Texas Instruments CD4520B datasheet, then confirm that the chosen decoded state produces the required duty cycle.

🏭

Digital Event Counter

The CD4520BM suits event-counting circuits because it offers two 4-bit binary up-counter sections with internally synchronous stages. Pulses from a sensor, switch, or control event can be conditioned externally and applied to the counter input, while the binary outputs are decoded into higher-level states. The two sections can count separate event streams or provide cascaded counting. Use the manufacturer pin and truth-table information to establish reset and enable behavior, and do not rely on an assumed pinout when connecting the counter in a new PCB design.

🔧

Digital Sequencer

The CD4520BM can function as a compact binary sequencer in equipment-control and automation logic. Its 4 binary output bits provide a count state that external decode logic can translate into ordered operating steps. The availability of two counter sections allows two independent sequences to be implemented in one 16-SOIC package. For reliable sequencing, define the reset state, wrap point, clock edge, and output decoding before layout, and compare the decoded states with the device truth table from the CD4520B documentation.

⏱️

Timing and Delay Generation

The CD4520BM’s two synchronous 4-stage binary counters can be used to create repeatable timing intervals or delayed control events when a system clock is present. The binary count can be decoded to trigger an action after a predetermined number of clock edges, supporting periodic sequencing and timeout-style functions. Because the retrieved product record does not establish maximum frequency or propagation-delay limits, confirm those specifications in the manufacturer datasheet and include external reset or qualification logic where a deterministic startup state is required.

📺

Instrumentation and Measurement

The CD4520BM is applicable to measurement and instrumentation systems that count test events, reference transitions, or repeatable stimulus cycles. Two counter sections provide flexible counting resources without requiring two separate counter packages, and the binary output simplifies connection to display, latch, or control logic. For accurate measurement results, synchronize the input signal, define the reset interval, and observe clock, enable, and output timing constraints from the official family documentation. The device should be used only within its confirmed supply and environmental limits.

🖥️

Consumer and Industrial Control

The CD4520BM can support simple control logic in appliances, panel interfaces, and industrial equipment where a counter tracks operating cycles, mode changes, or repeated events. Its dual 4-bit binary structure provides compact state management, while the 16-SOIC package is practical for conventional surface-mount assembly. Engineers should design reset behavior to avoid unintended counts after power application, account for input conditioning, and verify that the counter’s electrical limits meet the target system’s supply and environmental requirements.

What is the CD4520BM?
The CD4520BM is a Texas Instruments CMOS dual binary up-counter with two 4-bit counter sections in a 16-pin SOIC package. According to the Texas Instruments CD4520B product page and the CD4520BM distributor listing, the device contains two identical, internally synchronous 4-stage counters. It is intended for binary counting, frequency division, timing, and sequential-control applications where two counter functions can be implemented in one package.
How many counters and bits does the CD4520BM contain?
The CD4520BM contains 2 counter elements, and each element provides a 4-bit binary count using 4 stages. The DigiKey product description identifies CD4520BM as a counter IC with 2 elements and 4-bit operation. Texas Instruments describes the family as a CMOS dual binary up-counter, making the device useful where two independently addressed counting functions are preferable to using two separate packages.
Where can I download the CD4520B datasheet?
The official Texas Instruments CD4520B product page is the primary location for the manufacturer datasheet and supporting technical documentation. It links to the CD4518B and CD4520B data sheet, product details, ordering information, design support, and quality information. Open the linked datasheet from https://www.ti.com/product/CD4520B and confirm that the document covers the CD4520BM ordering suffix before using its ratings and pin descriptions.
Can the CD4520BM count on both positive and negative clock edges?
The CD4520B family uses D-type flip-flop counter stages with interchangeable clock and enable lines, allowing incrementing on either the positive-going or negative-going transition when configured appropriately. The retrieved technical description states this counter behavior directly. The CD4520BM listing also characterizes the part as supporting positive and negative counting, so the final circuit must still follow the manufacturer pin and truth-table instructions.
What package does the CD4520BM use?
The CD4520BM is supplied in a 16-pin SOIC package. This package and pin count are stated in the DigiKey product record, while the manufacturer names the family CD4520B. The CD4520BM suffix denotes the Texas Instruments leaded SOIC ordering option, making it important to verify the exact suffix, pin orientation, and footprint before placing an order or planning a PCB footprint.
Is the CD4520BM suitable for frequency division?
The CD4520BM is suitable for many frequency-divider and timing applications because it provides two internally synchronous 4-stage binary counters. The binary outputs can be decoded to obtain a divided clock or timing interval. Actual operating limits, maximum toggle frequency, and supply requirements must be checked in the official CD4520B datasheet before implementing a divider at a specific frequency.
What is the difference between the CD4520BM and CD4520BM96?
The CD4520BM and CD4520BM96 both identify the Texas Instruments CD4520B dual binary up-counter family, but the final ordering code differentiates the commercial packing option. The CD4520BM is the leaded 16-SOIC ordering variant, while CD4520BM96 is listed as the tape-and-reel ordering form. Because packing changes procurement and reel handling rather than the counter function, confirm reel quantity, orientation, and labeling against the manufacturer order information.
When should I choose the CD4520BM over another 4-bit counter?
Choose the CD4520BM when the design needs two 4-bit binary up-counters, internally synchronous counter stages, selectable positive-going or negative-going counting behavior, and a 16-SOIC footprint. It is especially suitable for frequency division and sequencing. If a BCD counter, independent asynchronous ripple stage, different supply range, or different package is required, verify those requirements against the manufacturer datasheet rather than assuming functional interchangeability.
Is the CD4520BM a drop-in replacement for another counter IC?
The CD4520BM should be treated as a drop-in replacement only after its complete pinout, supply range, timing ratings, output levels, and counter reset behavior have been matched against the original device. The retrieved cross-reference results do not establish five or more verified, pin-compatible substitutes. Use the Texas Instruments cross-reference search and the manufacturer CD4520B datasheet, then request a quote for any candidate that passes the engineering review.
What can replace the CD4520BM?
A valid replacement for the CD4520BM must implement two 4-bit binary up-counters in the same 16-SOIC footprint and match the original supply voltage, timing, reset, and output specifications. No sufficient set of distinct, verified drop-in alternatives appears in the retrieved cross-reference records, so no substitute should be assumed. The manufacturer cross-reference search is the appropriate starting point for an approved equal or pin-compatible source.
Where can I buy CD4520BM online?
The CD4520BM is listed by Texas Instruments and appears in distributor catalogs for purchase, but live commercial terms change by quantity and region. Use the Request a Quote form on this page for current price, stock, lead time, and shipment options. This avoids presenting stale or incomplete market data while preserving a direct procurement path for the exact CD4520BM ordering code.
What is the price of the CD4520BM?
The current CD4520BM price depends on quantity, inventory, and commercial terms. No qualifying quantity-break table with explicit prices and quantities is available for the exact MPN, so this page does not publish a potentially stale price figure. Submit a Request a Quote with your required quantity and delivery location to receive current commercial terms for CD4520BM.
What is the lead time for the CD4520BM?
A fixed CD4520BM lead time cannot be confirmed from the retrieved manufacturer and distributor records. Lead time may vary with order quantity, production status, packaging, and destination. Use the Request a Quote form on this page with your quantity and required delivery date so current availability and lead time can be checked for the exact Texas Instruments part number.
Is the CD4520BM in stock?
Current CD4520BM inventory is not confirmed by the static product records used for this page. The distributor listings identify the part, but that alone does not establish stock for a requested quantity or date. Submit the required quantity through the Request a Quote form to obtain current inventory, delivery timing, and commercial confirmation.
What are the key specifications of CD4520BM that engineers should know?
The key confirmed CD4520BM characteristics are 2 counter elements, 4-bit binary counting per element, 4 internally synchronous stages, CMOS construction, selectable positive-going or negative-going counting behavior, and a 16-SOIC package. Texas Instruments identifies the family as the CD4520B CMOS Dual Binary Up-Counter. Supply voltage, timing ratings, temperature limits, and electrical thresholds require confirmation in the official datasheet before design release.

Dữ liệu tham khảo kỹ thuật cho CD4520BM — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the Texas Instruments CD4520BM when the design needs two 4-bit binary up-counters with internally synchronous stages, selectable counting edges, and a 16-SOIC footprint. It is appropriate for frequency division, event counting, timing, and decoded sequencing. CD4520BM96 offers the same identified CD4520B function in the same package and is useful when reel packaging is required, but its procurement code should not be mistaken for a distinct circuit design. The listed NXP CD4520BM may suit an approved dual-source program, subject to a detailed review of pinout, supply range, timing, lifecycle, and qualification because those attributes are not established by the retrieved records. If the system requires BCD counting, a different counter width, or different logic levels, select a device specifically specified for those requirements rather than relying only on the CD4520 name.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này CD4520BM96 CD4520BM
Package 16-SOIC 16-SOIC - same 16-SOIC - same
Brand Texas Instruments Texas Instruments NXP Semiconductors
Product Type CMOS dual binary up-counter CMOS dual binary up-counter Dual binary up-counter
Counter Width 4 bit 4 bit 4 bit
Counter Stage Count 4 stages per counter 4 stages per counter 4 stages per counter
Count Format Binary Binary Binary
Clock Edge Support Positive-going or negative-going transition Positive-going or negative-going transition Positive-going or negative-going transition
Internal Synchronization Synchronous Synchronous Synchronous

Bảo phân biệt quan trọng

  • Two counter sections in one package (vsCD4520BM96)
  • Selectable counting edge (vsCD4520BM)
  • Internally synchronous four-stage counter architecture (vsCD4520BM)

Ghi chú thiết kế

Do not substitute the CD4520BM for a BCD counter without checking the output encoding. The CD4520B family is identified as a binary up-counter, so its 4-bit output sequence and decoded states differ from a device intended to produce decimal-coded results. Likewise, confirm the required counting edge because the counter stages support both positive-going and negative-going transitions. Use the manufacturer pin-description table and truth table when assigning clock, enable, reset, and output connections.

Design the PCB around the exact 16-SOIC footprint and verify pin 1 orientation from the Texas Instruments package drawing. Place any locally required input conditioning or reset components close to their associated pins, and route the clock and enable traces away from noisy switching nodes. Because the counter uses internally synchronous stages, clean clock distribution remains important for predictable state changes even though the ripple-style interpretation of older counter families does not apply to this device.

Provide a stable clock edge and define how the circuit initializes after power-on. A counter that begins from an unintended state can produce an extra output transition or miss the first sequence step. Use the datasheet-supported reset arrangement and validate it across power-up, reset release, and clock-start conditions in hardware. Also condition external event signals before they reach the counter input, and account for propagation delay when decoding outputs in the same clock domain.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The retrieved manufacturer and distributor records do not provide explicit compliance declarations for the CD4520BM. AEC-Q100 is marked not applicable because the product is not described as an automotive-qualified device.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

cd4520b datasheet CD4520BM datasheet CD4520BM datasheet pdf CD4520BM pinout CD4520BM 16-SOIC pinout CD4520BM equivalent CD4520BM replacement CD4520BM cross reference CD4520BM frequency divider CD4520BM application circuit Texas Instruments CD4520BM CD4520BM price CD4520BM stock CD4520BM vs CD4520BM96

Các bộ phận và thuật ngữ liên quan

Texas Instruments CD4520BM CD4520B CD4520BM96 NXP Semiconductors CMOS logic IC digital counter binary counter up-counter counter IC frequency divider timing circuit D-type flip-flop internally synchronous counter positive-going clock transition negative-going clock transition 4-bit counter 4-stage counter 16-SOIC SOIC package surface-mount technology binary up-counter Texas Instruments CD4520B product page
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ