CD4520BM - 4-Bit CMOS Dual Binary Up-Counter | Texas Instruments
부품 번호: CD4520BM ✓ 활성CD4520BM 개요
A binary counter is a digital logic component that tracks a binary count through successive clock events. The CD4520BM belongs to the CMOS logic family and provides two counter elements in one package, allowing one device to implement two related counting functions when the application requires them. Its binary counting structure is distinct from a BCD counter, so the output encoding should be checked against the intended system format before substitution.
The primary design features visible in the manufacturer and distributor records are the dual-counter organization, four-stage binary count capacity, CMOS logic family, and 16-SOIC package. The manufacturer identifies CD4520B as a CMOS Dual Binary Up-Counter, while the distributor listing describes CD4520BM as a two-element, 4-bit, positive/negative counter in a 16-SOIC package. The M suffix indicates the leaded 16-pin SOIC ordering variant listed by Texas Instruments.
The CD4520BM can be used as a frequency divider, event counter, programmable timing element, digital sequencer, or general-purpose logic building block. In frequency-divider applications, the counter state can be monitored and decoded to produce a lower-frequency signal derived from an incoming clock. In sequencing applications, the binary output can be decoded by external logic to create ordered control steps.
For a new design, the clock, reset, enable, supply, and output behavior should be confirmed against the manufacturer datasheet and its operating limits. The exact operating voltage range, timing ratings, input and output levels, quiescent current, temperature range, and absolute maximum ratings are not established by the retrieved manufacturer and distributor records, so they must be checked against the official datasheet before qualification. The Request a Quote form on this page can be used for current commercial inquiry, including availability and lead time.
This page combines the manufacturer product record, distributor identification, package information, practical application guidance, and a conservative replacement analysis. The alternatives are limited to parts that can be identified from the retrieved cross-reference information without assuming unverified electrical or pin-level equivalence.
드롭인 대체품: CD4520BM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
CD4520BM96
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4520BM
✅ 드롭인가격 문의
데이터시트 보기 →CD4520BM 최대 정격 & 전기적 특성
| Product Type | CMOS dual binary up-counter |
| Counter Elements | 2 elements |
| Counter Stage Count | 4 stages per counter |
| Count Format | Binary |
| Counter Width | 4 bit |
| Logic Family | CMOS |
| Counting Direction | Up counter |
| Clock Edge Support | Positive-going or negative-going transition |
| Internal Synchronization | Synchronous |
| 패키지 | 16-SOIC |
| 핀 수 | 16 pins |
| 실장 유형 | Surface mount |
CD4520BM 16-soic 핀 구성 가이드
CD4520BM(16-soic 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CD4520BM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CD4520BM 적합 용도: 6 애플리케이션s: Frequency Divider, Digital Event Counter, Digital Sequencer, Timing and Delay Generation, Instrumentation and Measurement, Consumer and Industrial Control.
Frequency Divider
The CD4520BM can divide an incoming clock because each section provides four internally synchronous binary stages. A designer can use one counter to derive a lower-frequency signal and the second section for another division or timing function. The confirmed device characteristics are 2 elements, 4 stages per element, and selectable positive-going or negative-going counting. Before finalizing the circuit, verify the family’s maximum operating frequency, reset behavior, output timing, and supply-voltage limits in the official Texas Instruments CD4520B datasheet, then confirm that the chosen decoded state produces the required duty cycle.
추천
Digital Event Counter
The CD4520BM suits event-counting circuits because it offers two 4-bit binary up-counter sections with internally synchronous stages. Pulses from a sensor, switch, or control event can be conditioned externally and applied to the counter input, while the binary outputs are decoded into higher-level states. The two sections can count separate event streams or provide cascaded counting. Use the manufacturer pin and truth-table information to establish reset and enable behavior, and do not rely on an assumed pinout when connecting the counter in a new PCB design.
추천
Digital Sequencer
The CD4520BM can function as a compact binary sequencer in equipment-control and automation logic. Its 4 binary output bits provide a count state that external decode logic can translate into ordered operating steps. The availability of two counter sections allows two independent sequences to be implemented in one 16-SOIC package. For reliable sequencing, define the reset state, wrap point, clock edge, and output decoding before layout, and compare the decoded states with the device truth table from the CD4520B documentation.
추천
Timing and Delay Generation
The CD4520BM’s two synchronous 4-stage binary counters can be used to create repeatable timing intervals or delayed control events when a system clock is present. The binary count can be decoded to trigger an action after a predetermined number of clock edges, supporting periodic sequencing and timeout-style functions. Because the retrieved product record does not establish maximum frequency or propagation-delay limits, confirm those specifications in the manufacturer datasheet and include external reset or qualification logic where a deterministic startup state is required.
추천
Instrumentation and Measurement
The CD4520BM is applicable to measurement and instrumentation systems that count test events, reference transitions, or repeatable stimulus cycles. Two counter sections provide flexible counting resources without requiring two separate counter packages, and the binary output simplifies connection to display, latch, or control logic. For accurate measurement results, synchronize the input signal, define the reset interval, and observe clock, enable, and output timing constraints from the official family documentation. The device should be used only within its confirmed supply and environmental limits.
추천
Consumer and Industrial Control
The CD4520BM can support simple control logic in appliances, panel interfaces, and industrial equipment where a counter tracks operating cycles, mode changes, or repeated events. Its dual 4-bit binary structure provides compact state management, while the 16-SOIC package is practical for conventional surface-mount assembly. Engineers should design reset behavior to avoid unintended counts after power application, account for input conditioning, and verify that the counter’s electrical limits meet the target system’s supply and environmental requirements.
추천
엔지니어링 참조 데이터: CD4520BM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CD4520BM96 | CD4520BM |
|---|---|---|---|
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same |
| Brand | Texas Instruments | Texas Instruments | NXP Semiconductors |
| Product Type | CMOS dual binary up-counter | CMOS dual binary up-counter | Dual binary up-counter |
| Counter Width | 4 bit | 4 bit | 4 bit |
| Counter Stage Count | 4 stages per counter | 4 stages per counter | 4 stages per counter |
| Count Format | Binary | Binary | Binary |
| Clock Edge Support | Positive-going or negative-going transition | Positive-going or negative-going transition | Positive-going or negative-going transition |
| Internal Synchronization | Synchronous | Synchronous | Synchronous |
주요 차별점
- Two counter sections in one package (vs CD4520BM96)
- Selectable counting edge (vs CD4520BM)
- Internally synchronous four-stage counter architecture (vs CD4520BM)
설계 노트
Do not substitute the CD4520BM for a BCD counter without checking the output encoding. The CD4520B family is identified as a binary up-counter, so its 4-bit output sequence and decoded states differ from a device intended to produce decimal-coded results. Likewise, confirm the required counting edge because the counter stages support both positive-going and negative-going transitions. Use the manufacturer pin-description table and truth table when assigning clock, enable, reset, and output connections.
Design the PCB around the exact 16-SOIC footprint and verify pin 1 orientation from the Texas Instruments package drawing. Place any locally required input conditioning or reset components close to their associated pins, and route the clock and enable traces away from noisy switching nodes. Because the counter uses internally synchronous stages, clean clock distribution remains important for predictable state changes even though the ripple-style interpretation of older counter families does not apply to this device.
Provide a stable clock edge and define how the circuit initializes after power-on. A counter that begins from an unintended state can produce an extra output transition or miss the first sequence step. Use the datasheet-supported reset arrangement and validate it across power-up, reset release, and clock-start conditions in hardware. Also condition external event signals before they reach the counter input, and account for propagation delay when decoding outputs in the same clock domain.
규정 준수 정보
The retrieved manufacturer and distributor records do not provide explicit compliance declarations for the CD4520BM. AEC-Q100 is marked not applicable because the product is not described as an automotive-qualified device.