CS8427-DZZ 96kHz Digital Audio Transceiver | Cirrus Logic
MPN: CS8427-DZZ ✓ Hoạt độngCS8427-DZZ Tóm tắt
A digital audio interface transceiver is an interface IC that receives and transmits digital audio signals between system components. In the broader electronics hierarchy, it belongs to the audio interface IC family, which sits within interface ICs, integrated circuits, and semiconductor signal-processing devices. The CS8427 supports digital audio designs requiring a 96 kHz operating rate and provides a defined approach to transferring two-channel digital audio information across a circuit board or between digital audio subsystems.
The CS8427-DZZ is identified by the DigiKey product listing as an Audio Special Purpose audio transceiver with two channels in a 28-pin TSSOP package. The manufacturer datasheet excerpt identifies the CS8427 as a 96 kHz digital audio interface transceiver and confirms that the family is offered in 28-pin SOIC and TSSOP packages. The DZZ ordering code is associated with the 28-pin TSSOP option, while the related automotive and packaging variants should be selected according to the required temperature grade and shipment method.
Typical applications include digital audio equipment, musical instruments, consumer audio systems, and professional audio products. The transceiver role is especially relevant where a system must move digital audio information between a source, processing chain, and destination while maintaining a defined sample-rate domain. Its 28-pin TSSOP package provides a practical surface-mount option for designs using fine-pitch assembly methods.
When designing around the CS8427-DZZ, use the manufacturer pin-description table to assign every signal and supply connection. Decoupling, grounding, signal routing, and unused-pin treatment must follow the recommended application circuit because digital audio interfaces can be sensitive to return-path discontinuities and clock-related noise. Confirm the exact interface voltage levels, supported audio formats, master-clock requirements, and control configuration against the manufacturer datasheet for the target system.
This page combines manufacturer-family information, distributor identification, package details, engineering guidance, and structured component data to support faster design review. It also distinguishes the exact CS8427-DZZ order code from related packaging and temperature options and explains where a direct, same-footprint replacement should be verified before design release.
Bộ thay thế dễ dàng lắp đặt cho CS8427-DZZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
CS8427-DZZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS8427-DZZ Tỷ lệ tối đa & tính chất điện
| Device Type | Audio Special Purpose digital audio interface transceiver |
| Operating Sample Rate | 96 kHz |
| Channel Count | 2 channels |
| Package Type | 28-pin TSSOP |
| Kiểu lắp đặt | Surface mount |
| Commercial Operating Temperature | -10°C to +70°C |
| Automotive Operating Temperature | -40°C to +85°C |
| Available Family Packages | 28-pin SOIC and 28-pin TSSOP |
| Signal Direction | Receive and transmit digital audio |
| Primary Application | Digital audio interface |
| Target Equipment | Audio and musical instruments |
| Evaluation Support | CDB8427 customer demonstration board |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Hướng dẫn cấu hình chân CS8427-DZZ 28-pin soic and 28-pin tssop
Cấu hình chân cho CS8427-DZZ (28-pin soic and 28-pin tssop gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CS8427-DZZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CS8427-DZZ phù hợp cho 6 Áp dụngs: Digital Audio Interface Routing, Musical Instrument Audio Systems, Consumer Audio Equipment, Professional Audio Processing, Digital Recording and Playback, Audio Evaluation and Development.
Digital Audio Interface Routing
The CS8427-DZZ fits a board that must transfer two-channel digital audio information at a 96 kHz operating rate. Its receive-and-transmit transceiver role places it between a digital audio source, processing circuitry, and a destination device, reducing the need for separate one-way interface components. The 28-pin TSSOP package also supports compact, surface-mount audio products. Confirm the supported digital audio format, voltage levels, clock architecture, and pin assignments in the manufacturer application circuit before finalizing the layout.
Được đề xuất
Musical Instrument Audio Systems
The CS8427-DZZ is applicable to digital audio links inside electronic musical instruments and related sound-processing equipment. Its two-channel 96 kHz digital audio capability can carry stereo program information between source, effect, and output sections while maintaining a defined digital sample-rate domain. The surface-mounted 28-pin TSSOP package is useful where connector and processing layout leave limited board area. Interface-format and master-clock requirements must be matched to the instrument's audio architecture.
Được đề xuất
Consumer Audio Equipment
A consumer audio product can use the CS8427-DZZ where internal digital audio must move between source, conversion, processing, and amplification stages at 96 kHz. The two-channel transceiver architecture suits stereo digital paths, while the 28-pin TSSOP package enables assembly on compact boards. The design must maintain continuous ground references and isolate digital clock lines from analog audio paths. Verify supply rails and logic thresholds before applying the device to a particular consumer platform.
Được đề xuất
Professional Audio Processing
The CS8427-DZZ can support digital routing in professional audio equipment operating at a 96 kHz sample rate. Its two-channel receive-and-transmit function is appropriate for stereo processing paths, digital mixers, and signal-conversion stages where a compact surface-mount implementation is needed. Clock jitter, return-path continuity, and grounding can affect digital signal integrity even when the nominal data rate is correct. Use the manufacturer's reference layout and verify interface timing during hardware bring-up.
Được đề xuất
Digital Recording and Playback
The CS8427-DZZ is suitable for the internal digital-audio backbone of recording and playback systems that exchange two-channel audio at 96 kHz. It can sit between conversion stages and the system's digital transport or processing section, providing a compact transceiver rather than a full analog codec. This arrangement preserves a digital audio domain between modules while leaving analog-to-digital and digital-to-analog conversion to dedicated devices. Supply sequencing and supported control configuration require verification against the complete system design.
Được đề xuất
Audio Evaluation and Development
The CS8427-DZZ can be evaluated in digital audio interface development platforms to reproduce a 96 kHz two-channel link before integrating it into production hardware. The manufacturer identifies the CDB8427 customer demonstration board for device evaluation and implementation guidance, providing a practical way to check digital audio routing and board-level behavior. Designers should compare the demonstration-board layout with their own clocking, grounding, and decoupling arrangement. Interface-format and pin-level verification remain essential before production adaptation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CS8427-DZZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CS8427-DZZR |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 28-pin TSSOP | 28-pin TSSOP |
| Device Type | Digital audio interface transceiver | Digital audio interface transceiver |
| Operating Sample Rate | 96 kHz | 96 kHz |
| Channel Count | 2 channels | 2 channels |
| Order-Code Difference | CS8427-DZZ | R ordering suffix; shipment-method detail |
| RoHS Status | unknown | unknown |
Bảo phân biệt quan trọng
- Compact two-channel transceiver implementation (vsCS8427-DZZR)
- Exact 28-pin TSSOP order code (vsCS8427-DZZR)
- Digital audio routing in a single interface IC (vsCS8427-DZZR)
Ghi chú thiết kế
Use the manufacturer's 28-pin TSSOP land pattern and place the CS8427-DZZ in the orientation marked on the assembly drawing. Position input and output decoupling capacitors close to the relevant supply pins, and route high-frequency digital signals over a continuous ground plane. The available product information does not identify individual pin functions, so every connection and unused pin must be assigned from the manufacturer pin-description table.
Keep clock traces short and isolate them from switching-node and analog input routes. Digital audio interfaces can be sensitive to return-path discontinuities even at a nominal 96 kHz data rate, particularly when surrounding circuitry contains converters or amplifiers. Use a common, uninterrupted ground reference beneath and around the transceiver, minimize loop area, and test the assembled board for clock-related ringing or data errors.
Do not infer that every CS8427 suffix has the same package, temperature grade, or shipment configuration. The manufacturer lists both 28-pin SOIC and TSSOP options and separate commercial and automotive grades, while CS8427-DZZR is documented as a 28-pin TSSOP variant. Verify the ordering table, supported interface format, supply limits, clock requirements, and unused-pin treatment before releasing a PCB or purchase order.
Thông tin tuân thủ
The manufacturer datasheet excerpt identifies commercial and automotive temperature grades but does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for CS8427-DZZ.