Infineon

CY8C3444AXI-096 - 50MHz 16KB 8051 MCU | Infineon

MPN: CY8C3444AXI-096 ✓ Hoạt động
1.71 V to 5.5 V Vdss 100-lead TQFP, 14 mm x 14 mm Package 50 MHz Speed 16 KB (16K x 8 bits) Memory
MOQ: 1 |

CY8C3444AXI-096 Tóm tắt

Infineon Technologies CY8C3444AXI-096 is an 8-bit PSoC 3 CY8C34xx microcontroller with a 50 MHz 8051 core, 16 KB of flash memory, and a 100-lead TQFP package measuring 14 mm by 14 mm. Its stated operating-voltage range is 1.71 V to 5.5 V, making it suitable for embedded control, sensor-interface, communications, and industrial product designs that require a compact programmable system-on-chip.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The 8051 instruction-set architecture provides a familiar platform for embedded control, while the PSoC 3 family integrates programmable analog and digital resources around the core. This combination lets designers consolidate functions that might otherwise require separate analog, digital, and interface components, reducing board complexity in compact control systems.

The CY8C3444AXI-096 operates at up to 50 MHz and contains 16 KB, or 16K by 8 bits, of flash memory. Its 1.71 V to 5.5 V supply range supports low-voltage designs while retaining compatibility with common 3.3 V and 5 V system rails. The 100-TQFP package offers enough external connections for programmable peripheral assignments, signal conditioning, communications, and mixed-signal control applications.

PSoC 3 devices use a programmable architecture rather than relying only on fixed-function peripheral blocks. Engineers can configure digital blocks for timers, serial functions, and logic operations, while programmable analog resources can implement functions such as amplifiers, filters, comparators, and analog-to-digital conversion. The exact resources, electrical limits, accuracy, and peripheral assignments must be confirmed from the manufacturer datasheet before final schematic or firmware decisions.

Typical uses include industrial sensing and acquisition, building and environmental controls, consumer interfaces, communication modules, and compact embedded products. The device is particularly relevant when the design benefits from programmable mixed-signal behavior without using a larger high-pin-count microcontroller package.

PCB implementation requires careful attention to the 100-lead TQFP footprint, exposed supply routing, decoupling, clock stability, and analog-signal isolation. Confirm pin multiplexing, programming requirements, peripheral limits, and startup behavior in the manufacturer datasheet and device configuration documentation.

This page combines the available manufacturer and distributor specifications with package-aware comparison information, practical design guidance, and clearly identified engineering limitations, helping buyers evaluate the CY8C3444AXI-096 before requesting a quotation.

Bộ thay thế dễ dàng lắp đặt cho CY8C3444AXI-096 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

CY8C3444AXA-096

✅ Drop-In
📦 100-TQFP (14x14 mm)
Same 8-bit 8051 core, 50 MHz clock, 16 KB flash, and 1.71 V to 5.5 V range; ordering suffix differs

📋 Tham chiếu thay thế (không có trong danh mục)

CY8C3446AXI-099

✅ Drop-In
📦 TQFP-100
Flash increases from 16 KB to 64 KB (+300%) and UDB count is listed as 24; clock and package family match

📋 Tham chiếu thay thế (không có trong danh mục)

CY8C3444AXI-096 Tỷ lệ tối đa & tính chất điện

Product Type 8-bit PSoC 3 CY8C34xx microcontroller
Processor Core 8051 8-bit core
Tần số xung maksimum 50 MHz
Flash Memory 16 KB (16K x 8 bits)
Operating Voltage Range 1.71 V to 5.5 V
Hộp 100-lead TQFP, 14 mm x 14 mm
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân CY8C3444AXI-096 100-lead tqfp, 14 mm x 14 mm

Cấu hình chân cho CY8C3444AXI-096 (100-lead tqfp, 14 mm x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 100-lead tqfp, 14 mm x 14 mm cho CY8C3444AXI-096

Không có dữ liệu chân cụ thể sẵn có cho CY8C3444AXI-096.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

CY8C3444AXI-096 phù hợp cho 6 Áp dụngs: Industrial Sensor Acquisition, Building and Environmental Controls, Communication Interface Module, Portable Measurement Device, LED Lighting Controller, Compact Consumer Interface.

🏭

Industrial Sensor Acquisition

The CY8C3444AXI-096 fits industrial sensor-acquisition systems that require local signal conditioning, digital processing, and compact control logic in one package. Its 8-bit 8051 core operates at up to 50 MHz, while the PSoC 3 architecture can provide programmable analog and digital resources rather than requiring a fixed collection of peripherals. With 16 KB of flash, the device can host acquisition control, filtering, calibration handling, and communication logic. The 100-lead TQFP package provides extensive routing flexibility for sensor inputs and peripheral buses. Designers should verify converter resolution, analog bandwidth, noise performance, and the required peripheral mapping against the exact family documentation before finalizing a 1.71 V to 5.5 V mixed-signal board.

🧩

Building and Environmental Controls

The CY8C3444AXI-096 is appropriate for building-control nodes that coordinate sensors, actuators, and local user interfaces. A 50 MHz 8051 core provides sufficient control throughput for debouncing, state-machine execution, and communication protocol handling, while PSoC 3 programmable resources can reduce the number of separate analog and digital functions. The 16 KB flash capacity suits focused firmware for HVAC panels, lighting controllers, occupancy equipment, or environmental monitors. Its 1.71 V to 5.5 V operating range supports multiple low-voltage rail architectures. Before schematic release, confirm the digital and analog resource count, I/O voltage tolerances, low-power requirements, and timing margins for the intended wall-power or battery-backed installation.

🌐

Communication Interface Module

The CY8C3444AXI-096 can serve as the controller in a compact communication module that bridges a sensor or actuator network to a host processor. Its 50 MHz maximum clock supports protocol framing, buffering, diagnostics, and supervisory logic, while the PSoC 3 programmable blocks can implement digital functions that would otherwise occupy a separate logic device. Sixteen kilobytes of flash is appropriate for a focused endpoint firmware with configuration storage and a small update mechanism. The 100-lead TQFP package leaves ample pins for serial interfaces, status indicators, and control outputs. Confirm the exact serial peripheral resources, pin multiplexing, clock tolerance, and electrical specifications for the selected communication standard before laying out the module.

📱

Portable Measurement Device

The CY8C3444AXI-096 is well suited to portable measurement products where a 50 MHz control core, programmable signal processing, and a low 1.71 V minimum supply can improve integration. The 8051 core can execute measurement sequencing, calibration, data filtering, and user-interface control, while PSoC 3 analog resources may consolidate amplification, filtering, and conversion functions. Its 16 KB flash is adequate for focused firmware rather than a large graphical application. The 100-lead TQFP package supports separate analog and digital routing, although care is required to prevent noisy switching and clock paths from degrading measurements. Validate converter performance, analog noise, power consumption, startup behavior, and battery-voltage limits using the manufacturer's characterization data.

💡

LED Lighting Controller

The CY8C3444AXI-096 can control addressable or multi-channel LED systems where timing accuracy, programmable logic, and compact integration are important. Its 50 MHz 8051 core provides enough execution speed for animation, status handling, and communication updates, while the PSoC 3 programmable digital resources can generate timing sequences or implement protocol logic. A 16 KB flash footprint works well for a dedicated lighting controller with a limited animation set and configuration storage. The 1.71 V to 5.5 V supply range also allows integration into low-voltage lighting systems. Before selecting it for a particular lamp architecture, verify PWM resources, timer accuracy, output-driver requirements, thermal conditions, and whether the module needs dimming, calibration, or open-load detection.

📺

Compact Consumer Interface

The CY8C3444AXI-096 can implement a compact consumer interface for appliance controls, touch-oriented front panels, or small status displays. The programmable PSoC 3 resources may combine button detection, debouncing, indicator control, and analog sensing around the 8-bit 8051 core. At up to 50 MHz, the processor supports responsive state management and communication, while 16 KB of flash is suitable for a focused user-interface application. The 100-lead TQFP package provides enough connections for display or touch peripherals, control outputs, and programming. Confirm the available display interfaces, timer channels, GPIO current limits, and analog functions against the final configuration. Ensure that the chosen 1.71 V to 5.5 V operating region also satisfies every attached peripheral's voltage requirements.

Tóm tắt các sản phẩm được đề xuất

CY8C3446AXI-099 Higher-flash PSoC 3 family option Được sử dụng trong: Industrial Sensor Acquisition, Building and Environmental Controls, Communication Interface Module, Portable Measurement Device, LED Lighting Controller, Compact Consumer Interface CY8C3444AXA-096 Closely related 100-TQFP ordering variant Được sử dụng trong: Industrial Sensor Acquisition, Building and Environmental Controls, Communication Interface Module, Portable Measurement Device, LED Lighting Controller, Compact Consumer Interface
What is the CY8C3444AXI-096?
The CY8C3444AXI-096 is an Infineon Technologies PSoC 3 CY8C34xx microcontroller built around an 8-bit 8051 processor core. It operates at up to 50 MHz, provides 16 KB of flash memory, accepts a 1.71 V to 5.5 V supply, and is packaged in a 100-lead TQFP measuring 14 mm by 14 mm. Distributor product records identify the device as an 8051 PSoC 3 microcontroller with programmable mixed-signal resources.
What are the key specifications of CY8C3444AXI-096 that engineers should know?
The key specifications are a 50 MHz maximum clock, an 8-bit 8051 core, 16 KB of flash, a 1.71 V to 5.5 V operating range, and a 100-lead TQFP package. The 14 mm by 14 mm package provides a substantial number of external pins for programmable peripheral assignments and mixed-signal connections. Exact peripheral counts, timing limits, and pin functions must be taken from the manufacturer pin-description table before layout.
Where can I download the CY8C3444AXI-096 datasheet PDF?
The CY8C3444AXI-096 documentation should be obtained from the official Infineon product page for the MPN. The device is a PSoC 3 CY8C34xx-family microcontroller, so engineers should also consult the applicable PSoC 3 family datasheet, device configuration user guide, and programming documentation. Confirm that every document revision applies to the exact ordering code before releasing the PCB or firmware.
Where can I find the CY8C3444AXI-096 pinout?
The CY8C3444AXI-096 pinout is found in the pin-description table of the applicable Infineon PSoC 3 CY8C34xx documentation. The device uses a 100-lead TQFP package, but its peripheral functions can be programmable, so the final pin function depends on the device configuration. Use the manufacturer's ordering and configuration information when assigning PCB nets rather than relying on a generic package drawing.
What is the voltage range of CY8C3444AXI-096?
The CY8C3444AXI-096 operates from 1.71 V to 5.5 V according to its distributor specification listing. This range allows operation from low-voltage rails and common 3.3 V or 5 V system supplies, subject to the detailed core, analog, and I/O voltage constraints in the manufacturer datasheet. Check each power pin and peripheral domain before selecting regulator tolerances.
How much flash memory does CY8C3444AXI-096 have?
The CY8C3444AXI-096 contains 16 KB of flash memory, specified as 16K by 8 bits. Its operating frequency is 50 MHz. This memory figure distinguishes it from related CY8C34xx devices with larger flash capacities, so firmware size should be checked against the final application, bootloader, calibration data, and update requirements.
Is CY8C3444AXI-096 suitable for industrial control applications?
The CY8C3444AXI-096 can suit industrial control applications requiring a 50 MHz 8051 core, 16 KB of flash, and programmable mixed-signal functionality. Its 1.71 V to 5.5 V range and 100-lead TQFP package support dense control boards. For deployment in a specific industrial environment, verify the device's operating-temperature rating, qualification status, and applicable regulatory requirements.
Can CY8C3444AXI-096 be used for sensor and signal acquisition designs?
Yes, the CY8C3444AXI-096 is suitable for compact sensor-acquisition and signal-conditioning designs when the required PSoC 3 peripheral configuration is available. Its 8051 core runs at up to 50 MHz, while the PSoC architecture supports programmable digital and analog functions. Validate converter resolution, input bandwidth, noise, and the exact pin assignment before committing the design.
What can replace CY8C3444AXI-096?
The closest identified replacement is the Infineon CY8C3444AXA-096, which uses the same 100-TQFP, 14 mm by 14 mm format and is listed with the same 8-bit 8051 core, 50 MHz clock, 16 KB flash, and 1.71 V to 5.5 V range. The AXA ordering code represents a distinct package or ordering option, so verify its tape-and-reel orientation, pin compatibility, lifecycle status, and exact suffix requirements before substitution.
Is CY8C3444AXI-096 the same as CY8C3444AXA-096?
The CY8C3444AXI-096 and CY8C3444AXA-096 are closely related Infineon orderable variants with the same 8-bit 8051 core, 50 MHz maximum frequency, 16 KB flash, and 100-TQFP package format. Their ordering suffixes can denote different packing or production options, so they should not be treated as interchangeable without confirming the manufacturer ordering guide, tape orientation, markings, and delivery configuration.
CY8C3444AXI-096 vs CY8C3446AXI-099: which should I choose?
Choose the CY8C3444AXI-096 when 16 KB of flash and the specified 50 MHz 8051 configuration are sufficient. The CY8C3446AXI-099 is identified as a PSoC 3 CY8C34xx-family device with an 8051 core, 64 KB of flash, 24 UDBs, and TQFP-100 packaging. Its larger memory can benefit firmware-heavy designs, but it is not established as a pin-compatible drop-in replacement.
When should I choose CY8C3444AXI-096 over CY8C3446AXI-099?
Choose the CY8C3444AXI-096 when its 16 KB flash is sufficient and a smaller memory configuration simplifies the application or cost plan. Choose the CY8C3446AXI-099 when firmware growth, 64 KB of flash, or 24 Universal Digital Blocks provide a clear functional benefit. Because the two devices have different memory and peripheral resources, verify software, board, and timing requirements rather than assuming drop-in compatibility.
Where can I buy CY8C3444AXI-096 online?
Use the Request a Quote form on this page to request the CY8C3444AXI-096, current availability, lead time, and orderable packaging. The exact MPN is also listed by several authorized supply channels, but inventory and commercial terms change frequently. Provide the required package suffix, quantity, and target date when submitting the request so the quotation matches the intended assembly process.
What is the price of CY8C3444AXI-096?
The current commercial price for the CY8C3444AXI-096 should be requested through the Request a Quote form on this page. Pricing depends on order quantity, package suffix, delivery destination, and current inventory. The 50 MHz 8-bit 8051 core, 16 KB flash, and 100-lead TQFP package are the principal configuration identifiers to include in the request.
What is the lead time and stock status for CY8C3444AXI-096?
Use the Request a Quote form on this page to obtain the current stock position, lead time, and minimum order quantity for CY8C3444AXI-096. Inventory for a specific suffix can vary with production schedules and order volume. Include the required delivery date and quantity, and specify whether the order is for prototype evaluation or production assembly.

Dữ liệu tham khảo kỹ thuật cho CY8C3444AXI-096 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the CY8C3444AXI-096 for compact embedded-control designs that fit within 16 KB of flash, use a 50 MHz 8-bit 8051 core, and need a 100-lead TQFP footprint with a 1.71 V to 5.5 V operating range. The CY8C3444AXA-096 is the closest identified ordering variant because it shares the listed core, frequency, memory capacity, voltage range, and package format; verify its suffix, packing orientation, and production status before substitution. Select the CY8C3446AXI-099 when firmware growth or its listed 24 UDBs justify the increase to 64 KB of flash, but validate pin and resource compatibility rather than treating it as an automatic drop-in. For all three devices, confirm the exact peripheral map, temperature rating, programming requirements, and lifecycle status from Infineon documentation before committing to production.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này CY8C3444AXA-096 CY8C3446AXI-099
Brand Infineon Technologies Infineon Technologies Infineon Technologies
Package 100-TQFP (14x14 mm) 100-TQFP (14x14 mm) TQFP-100
Product Family PSoC 3 CY8C34xx PSoC 3 CY8C34xx PSoC 3 CY8C34xx
Processor Core 8-bit 8051 8-bit 8051 8051
Flash Memory 16 KB (16K x 8 bits) 16 KB (16K x 8 bits) 64 KB
Ordering Suffix AXI-096 AXA-096 AXI-099

Bảo phân biệt quan trọng

  • Exact listed core, clock, memory, voltage, and package configuration (vsCY8C3444AXA-096)
  • Lower flash configuration for focused embedded firmware (vsCY8C3446AXI-099)
  • Documented 100-lead 14 mm by 14 mm package format (vsCY8C3446AXI-099)

Ghi chú thiết kế

Use the manufacturer power-decoupling recommendations for every supply domain and place the required ceramic capacitors close to the corresponding package pins. The device's stated operating range is 1.71 V to 5.5 V, but that does not mean every internal domain accepts the same voltage. Review the pin-description table and power-supply sequencing requirements before choosing regulator tolerances or separating analog and digital supplies.

Route the 100-lead TQFP perimeter carefully and assign pins according to the final programmed configuration. Because PSoC 3 peripheral functions can be remapped, confirm the device configuration before routing control, serial, timer, or analog signals. Keep sensitive analog inputs away from clock and high-current switching paths, and provide uninterrupted ground connectivity beneath and around the device.

Treat clock, programming, and serial interfaces as potentially noise-sensitive paths even though the maximum CPU frequency is 50 MHz. Use short return paths, minimize stub lengths, and keep the programming interface away from analog inputs where practical. Validate startup and signal margins with the actual clock source and peripheral configuration rather than assuming that the advertised processor frequency alone guarantees system-level timing.

Do not select a similarly named device solely from the package and clock rating. The CY8C3444AXA-096 matches the target's listed core, frequency, flash, voltage range, and package format, but ordering suffixes can affect packing or availability. The CY8C3446AXI-099 has 64 KB rather than 16 KB of flash and 24 UDBs. Check the exact MPN, pin compatibility, firmware memory budget, and manufacturer ordering information before production substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance attributes are not stated in the available manufacturer or distributor records. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations using the exact MPN documentation before procurement.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

CY8C3444AXI-096 datasheet CY8C3444AXI-096 specifications CY8C3444AXI-096 pinout CY8C3444AXI-096 datasheet pdf CY8C3444AXI-096 equivalent CY8C3444AXI-096 replacement CY8C3444AXI-096 price CY8C3444AXI-096 stock Infineon CY8C3444AXI-096 CY8C3444AXI-096 TQFP-100 CY8C3444AXI-096 8051 50MHz CY8C3444AXI-096 application circuit CY8C3444AXI-096 vs CY8C3446AXI-099 CY8C3444AXI-096 programming CY8C3444AXI-096 schematic

Các bộ phận và thuật ngữ liên quan

Infineon Technologies CY8C3444AXI-096 CY8C3444AXA-096 CY8C3446AXI-099 PSoC 3 CY8C34xx 8051 processor core 8-bit microcontroller system on chip programmable analog block Universal Digital Block flash memory 16 KB flash 50 MHz clock 1.71 V to 5.5 V operating range TQFP-100 100-lead TQFP 14 mm by 14 mm package embedded control sensor acquisition industrial control programmable mixed-signal semiconductor
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ