CY8C3444AXI-096 - 50MHz 16KB 8051 MCU | Infineon
料号: CY8C3444AXI-096 ✓ 量产中CY8C3444AXI-096 概述
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The 8051 instruction-set architecture provides a familiar platform for embedded control, while the PSoC 3 family integrates programmable analog and digital resources around the core. This combination lets designers consolidate functions that might otherwise require separate analog, digital, and interface components, reducing board complexity in compact control systems.
The CY8C3444AXI-096 operates at up to 50 MHz and contains 16 KB, or 16K by 8 bits, of flash memory. Its 1.71 V to 5.5 V supply range supports low-voltage designs while retaining compatibility with common 3.3 V and 5 V system rails. The 100-TQFP package offers enough external connections for programmable peripheral assignments, signal conditioning, communications, and mixed-signal control applications.
PSoC 3 devices use a programmable architecture rather than relying only on fixed-function peripheral blocks. Engineers can configure digital blocks for timers, serial functions, and logic operations, while programmable analog resources can implement functions such as amplifiers, filters, comparators, and analog-to-digital conversion. The exact resources, electrical limits, accuracy, and peripheral assignments must be confirmed from the manufacturer datasheet before final schematic or firmware decisions.
Typical uses include industrial sensing and acquisition, building and environmental controls, consumer interfaces, communication modules, and compact embedded products. The device is particularly relevant when the design benefits from programmable mixed-signal behavior without using a larger high-pin-count microcontroller package.
PCB implementation requires careful attention to the 100-lead TQFP footprint, exposed supply routing, decoupling, clock stability, and analog-signal isolation. Confirm pin multiplexing, programming requirements, peripheral limits, and startup behavior in the manufacturer datasheet and device configuration documentation.
This page combines the available manufacturer and distributor specifications with package-aware comparison information, practical design guidance, and clearly identified engineering limitations, helping buyers evaluate the CY8C3444AXI-096 before requesting a quotation.
直接替换替代料: CY8C3444AXI-096 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
CY8C3444AXA-096
✅ 直接替换📋 参考替代料(不在目录中)
CY8C3446AXI-099
✅ 直接替换📋 参考替代料(不在目录中)
CY8C3444AXI-096 最大额定值与电气特性
| Product Type | 8-bit PSoC 3 CY8C34xx microcontroller |
| Processor Core | 8051 8-bit core |
| 最大时钟频率 | 50 MHz |
| Flash Memory | 16 KB (16K x 8 bits) |
| Operating Voltage Range | 1.71 V to 5.5 V |
| 封装 | 100-lead TQFP, 14 mm x 14 mm |
| 安装类型 | Surface mount |
CY8C3444AXI-096 100-lead tqfp, 14 mm x 14 mm 引脚配置指南
CY8C3444AXI-096(100-lead tqfp, 14 mm x 14 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: CY8C3444AXI-096.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CY8C3444AXI-096 适用于 6 应用s: Industrial Sensor Acquisition, Building and Environmental Controls, Communication Interface Module, Portable Measurement Device, LED Lighting Controller, Compact Consumer Interface.
Industrial Sensor Acquisition
The CY8C3444AXI-096 fits industrial sensor-acquisition systems that require local signal conditioning, digital processing, and compact control logic in one package. Its 8-bit 8051 core operates at up to 50 MHz, while the PSoC 3 architecture can provide programmable analog and digital resources rather than requiring a fixed collection of peripherals. With 16 KB of flash, the device can host acquisition control, filtering, calibration handling, and communication logic. The 100-lead TQFP package provides extensive routing flexibility for sensor inputs and peripheral buses. Designers should verify converter resolution, analog bandwidth, noise performance, and the required peripheral mapping against the exact family documentation before finalizing a 1.71 V to 5.5 V mixed-signal board.
推荐
Building and Environmental Controls
The CY8C3444AXI-096 is appropriate for building-control nodes that coordinate sensors, actuators, and local user interfaces. A 50 MHz 8051 core provides sufficient control throughput for debouncing, state-machine execution, and communication protocol handling, while PSoC 3 programmable resources can reduce the number of separate analog and digital functions. The 16 KB flash capacity suits focused firmware for HVAC panels, lighting controllers, occupancy equipment, or environmental monitors. Its 1.71 V to 5.5 V operating range supports multiple low-voltage rail architectures. Before schematic release, confirm the digital and analog resource count, I/O voltage tolerances, low-power requirements, and timing margins for the intended wall-power or battery-backed installation.
推荐
Communication Interface Module
The CY8C3444AXI-096 can serve as the controller in a compact communication module that bridges a sensor or actuator network to a host processor. Its 50 MHz maximum clock supports protocol framing, buffering, diagnostics, and supervisory logic, while the PSoC 3 programmable blocks can implement digital functions that would otherwise occupy a separate logic device. Sixteen kilobytes of flash is appropriate for a focused endpoint firmware with configuration storage and a small update mechanism. The 100-lead TQFP package leaves ample pins for serial interfaces, status indicators, and control outputs. Confirm the exact serial peripheral resources, pin multiplexing, clock tolerance, and electrical specifications for the selected communication standard before laying out the module.
推荐
Portable Measurement Device
The CY8C3444AXI-096 is well suited to portable measurement products where a 50 MHz control core, programmable signal processing, and a low 1.71 V minimum supply can improve integration. The 8051 core can execute measurement sequencing, calibration, data filtering, and user-interface control, while PSoC 3 analog resources may consolidate amplification, filtering, and conversion functions. Its 16 KB flash is adequate for focused firmware rather than a large graphical application. The 100-lead TQFP package supports separate analog and digital routing, although care is required to prevent noisy switching and clock paths from degrading measurements. Validate converter performance, analog noise, power consumption, startup behavior, and battery-voltage limits using the manufacturer's characterization data.
推荐
LED Lighting Controller
The CY8C3444AXI-096 can control addressable or multi-channel LED systems where timing accuracy, programmable logic, and compact integration are important. Its 50 MHz 8051 core provides enough execution speed for animation, status handling, and communication updates, while the PSoC 3 programmable digital resources can generate timing sequences or implement protocol logic. A 16 KB flash footprint works well for a dedicated lighting controller with a limited animation set and configuration storage. The 1.71 V to 5.5 V supply range also allows integration into low-voltage lighting systems. Before selecting it for a particular lamp architecture, verify PWM resources, timer accuracy, output-driver requirements, thermal conditions, and whether the module needs dimming, calibration, or open-load detection.
推荐
Compact Consumer Interface
The CY8C3444AXI-096 can implement a compact consumer interface for appliance controls, touch-oriented front panels, or small status displays. The programmable PSoC 3 resources may combine button detection, debouncing, indicator control, and analog sensing around the 8-bit 8051 core. At up to 50 MHz, the processor supports responsive state management and communication, while 16 KB of flash is suitable for a focused user-interface application. The 100-lead TQFP package provides enough connections for display or touch peripherals, control outputs, and programming. Confirm the available display interfaces, timer channels, GPIO current limits, and analog functions against the final configuration. Ensure that the chosen 1.71 V to 5.5 V operating region also satisfies every attached peripheral's voltage requirements.
推荐
推荐产品汇总
工程参考数据: CY8C3444AXI-096 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CY8C3444AXA-096 | CY8C3446AXI-099 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) | TQFP-100 |
| Product Family | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx |
| Processor Core | 8-bit 8051 | 8-bit 8051 | 8051 |
| Flash Memory | 16 KB (16K x 8 bits) | 16 KB (16K x 8 bits) | 64 KB |
| Ordering Suffix | AXI-096 | AXA-096 | AXI-099 |
关键差异点
- Exact listed core, clock, memory, voltage, and package configuration (对比 CY8C3444AXA-096)
- Lower flash configuration for focused embedded firmware (对比 CY8C3446AXI-099)
- Documented 100-lead 14 mm by 14 mm package format (对比 CY8C3446AXI-099)
设计说明
Use the manufacturer power-decoupling recommendations for every supply domain and place the required ceramic capacitors close to the corresponding package pins. The device's stated operating range is 1.71 V to 5.5 V, but that does not mean every internal domain accepts the same voltage. Review the pin-description table and power-supply sequencing requirements before choosing regulator tolerances or separating analog and digital supplies.
Route the 100-lead TQFP perimeter carefully and assign pins according to the final programmed configuration. Because PSoC 3 peripheral functions can be remapped, confirm the device configuration before routing control, serial, timer, or analog signals. Keep sensitive analog inputs away from clock and high-current switching paths, and provide uninterrupted ground connectivity beneath and around the device.
Treat clock, programming, and serial interfaces as potentially noise-sensitive paths even though the maximum CPU frequency is 50 MHz. Use short return paths, minimize stub lengths, and keep the programming interface away from analog inputs where practical. Validate startup and signal margins with the actual clock source and peripheral configuration rather than assuming that the advertised processor frequency alone guarantees system-level timing.
Do not select a similarly named device solely from the package and clock rating. The CY8C3444AXA-096 matches the target's listed core, frequency, flash, voltage range, and package format, but ordering suffixes can affect packing or availability. The CY8C3446AXI-099 has 64 KB rather than 16 KB of flash and 24 UDBs. Check the exact MPN, pin compatibility, firmware memory budget, and manufacturer ordering information before production substitution.
合规信息
Compliance attributes are not stated in the available manufacturer or distributor records. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations using the exact MPN documentation before procurement.