CY8C3446PVI-082 50MHz 64KB 8-Bit PSoC 3 MCU | Infineon
MPN: CY8C3446PVI-082 ✓ Hoạt độngCY8C3446PVI-082 Tóm tắt
A programmable system-on-chip is a category of microcontroller that integrates a CPU, flash memory, analog conversion functions, programmable digital blocks, and communication peripherals into one device. Within the embedded-control hierarchy, the CY8C3446 belongs to the PSoC 3 family, which combines an 8051-compatible embedded core with configurable analog and digital peripheral blocks. This integration can reduce the number of separate components needed for sensing, control, and communication.
Key characteristics of the CY8C3446PVI-082 include a maximum core frequency of 50 MHz, 64 KB of flash memory, and an operating supply range of 1.71 V to 5.5 V. The device is identified as an industrial-temperature component and is offered in a 48-terminal rectangular SSOP package. These features position it for embedded products that require a compact package, broad supply-voltage support, and a dedicated 8-bit control architecture.
The 50 MHz 8051-compatible core provides dedicated processing for firmware-driven control tasks, while embedded flash retains program code without an external memory component. The PSoC architecture is particularly useful when a design needs both digital control and analog measurement. Engineers can configure supported peripheral functions rather than relying on a fixed combination of application-specific integrated peripherals, although final peripheral availability and configuration limits must be checked in the manufacturer datasheet.
Typical applications include industrial sensor controllers, building and environmental monitoring systems, compact consumer-control products, programmable instrumentation, motor-support circuitry, and low-voltage embedded products. The 1.71 V minimum operating voltage is useful for battery-derived systems, provided the complete design operates within the device's specified electrical and temperature limits. The 48-pin SSOP footprint also supports conventional surface-mount assembly rather than requiring a fine-pitch land pattern.
For PCB implementation, verify the exact pin assignments, exposed connections, decoupling requirements, programming interface, and peripheral multiplexing in the manufacturer datasheet before routing signals. Stable power and ground distribution are especially important when analog conversion blocks operate near the lower end of the 1.71 V to 5.5 V supply range. Programming requires a compatible Cypress/Infineon programming tool and an appropriate debug or programming adapter.
This page organizes the core specifications, package information, sourcing details, drop-in replacement candidates, comparison parameters, and application guidance for the CY8C3446PVI-082. It also highlights where a candidate differs in speed or temperature grade, helping engineers distinguish a true same-footprint substitution from a broader functional alternative.
Bộ thay thế dễ dàng lắp đặt cho CY8C3446PVI-082 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CY8C3446PVI-082 (cùng hình factor và footprint) — khác nhau ở Product Type, Flash Protection Levels, Interrupt Priority Levels, Interrupt Sources, Universal Digital Blocks.
CY8C3446PVE-082
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3446PVI-076
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CY8C3446PVI-092
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3446PVI-102
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CY8C3446PVI-082 Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit programmable system-on-chip microcontroller |
| Processor Core | 8051-compatible 8-bit core |
| Maximum Core Frequency | 50 MHz |
| Embedded Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Operating Voltage Range | 1.71 V to 5.5 V |
| ADC Resolution | 12 bits |
| Package Type | 48-pin SSOP |
| Package Code | SSOP |
| Terminal Count | 48 terminals |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Industrial |
| Programmable System-on-Chip Family | PSoC 3 CY8C34 family |
| Programming Interface | ISP and SWD |
Hướng dẫn cấu hình chân CY8C3446PVI-082 rectangular
Cấu hình chân cho CY8C3446PVI-082 (rectangular gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CY8C3446PVI-082.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY8C3446PVI-082 phù hợp cho 6 Áp dụngs: Industrial Sensor Controller, Building and Environmental Monitor, Programmable Instrumentation, Battery-Powered Embedded Control, Consumer Control Module, Low-Voltage Motor Support Controller.
Industrial Sensor Controller
The CY8C3446PVI-082 fits industrial sensor nodes that combine acquisition, local logic, and communications in a compact controller. Its 12-bit ADC supports digitizing analog sensor signals, while the 50 MHz 8051-compatible core handles sampling control, filtering, state machines, and protocol tasks. The 1.71 V to 5.5 V operating range also allows the controller to operate from low-voltage sensor rails when the peripheral configuration remains within the specified limits. In a practical design, the MCU controls sensor power sequencing, processes readings, and drives a communications transceiver through configurable digital blocks. The 48-pin SSOP package supports conventional surface-mount assembly. Because industrial nodes may be exposed to electrical noise and temperature variation, use the manufacturer datasheet to verify transient limits, ADC accuracy conditions, and the exact operating-temperature grade before production release.
Được đề xuất
Building and Environmental Monitor
The CY8C3446PVI-082 can serve as the central controller in a building-environment monitor that reads temperature, humidity, occupancy, or air-quality sensors. Its 12-bit ADC provides a suitable acquisition interface for analog sensor outputs, while the 8051-compatible core executes threshold logic, filtering, alarm states, and periodic reporting. Operating from 1.71 V to 5.5 V allows flexible connection to low-energy sensor and communication rails. A typical implementation places the MCU close to the analog inputs, uses a stable reference and controlled layout, and activates sensor power only when measurements are required. The 48-pin SSOP footprint leaves room for communications and discrete interfaces without requiring a complex package. Confirm ADC source impedance, sampling time, reference requirements, and sleep-mode behavior in the manufacturer datasheet before fixing the analog front end.
Được đề xuất
Programmable Instrumentation
The CY8C3446PVI-082 is suitable for compact instrumentation where measurement acquisition and control logic need to coexist in one microcontroller. The 50 MHz 8051-compatible core provides processing capacity for calibration tables, digital filtering, control loops, and user-interface state, while the 12-bit ADC handles analog inputs. The 1.71 V to 5.5 V range supports multiple embedded supply architectures, and the 48-pin SSOP package can simplify assembly where a larger fine-pitch package is unnecessary. In an instrument design, the MCU can coordinate a multiplexer, perform offset and gain correction, and present results through a display or communications interface. Engineers should check the electrical characteristics of the selected ADC inputs, external reference needs, pin multiplexing, and available programming resources in the manufacturer datasheet before finalizing the schematic.
Được đề xuất
Battery-Powered Embedded Control
The CY8C3446PVI-082 can be used in battery-powered embedded products where a low 1.71 V operating floor and compact 48-pin SSOP footprint are valuable. The MCU can wake a peripheral block, acquire a sensor reading, perform local control, and return to a low-power state without a separate host processor. Its 50 MHz core provides ample headroom for short burst-processing tasks, while embedded 64 KB flash retains firmware without an external program-memory device. Actual battery life depends on the chosen regulator, sensor load, active time, sleep behavior, and analog configuration rather than core frequency alone. Validate wake-up timing, brownout behavior, operating current, and supply sequencing for the complete product. Use the manufacturer datasheet's electrical characteristics and low-power guidance as the release criteria.
Được đề xuất
Consumer Control Module
The CY8C3446PVI-082 fits compact consumer-control modules that combine local logic, analog sensing, and programmable peripheral behavior. The 8051-compatible core runs at up to 50 MHz, the 64 KB flash supports a reasonably capable embedded application, and the 12-bit ADC can serve touch, potentiometer, temperature, or light-sensing inputs. The 1.71 V to 5.5 V supply range supports integration with multiple embedded power rails, while the 48-pin SSOP package remains practical for cost-sensitive surface-mount production. A typical design uses configurable digital blocks for timing or signal conditioning and the MCU for product-state logic and user actions. Review pin-sharing constraints, clock accuracy, startup behavior, and programming requirements before layout approval to avoid conflicts among the analog, timing, and communication resources.
Được đề xuất
Low-Voltage Motor Support Controller
The CY8C3446PVI-082 can support low-voltage motor-control and actuator systems by handling position sensing, limit inputs, timing, fault flags, and supervisory logic. Its 50 MHz 8051-compatible core can execute deterministic control tasks, while the 12-bit ADC may monitor feedback from resistive or current-sense signals when the electrical limits are satisfied. The 1.71 V to 5.5 V range permits a compact low-voltage control domain, and the 48-pin SSOP package provides pins for sensing and interface functions. The MCU should not directly drive motor current unless explicitly rated for that function; a suitable driver stage remains necessary. Verify PWM-capable resources, ADC operating conditions, fault-response timing, and external protection requirements in the manufacturer datasheet before constructing the power stage.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY8C3446PVI-082 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY8C3446PVE-082 | CY8C3446PVI-076 | CY8C3446PVI-092 | CY8C3446PVI-102 |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 48-pin SSOP | 48-pin SSOP | 48-pin SSOP | 48-pin SSOP | 48-pin SSOP |
| Ordering Suffix | PVI-082 | PVE-082 | PVI-076 | PVI-092 | PVI-102 |
Bảo phân biệt quan trọng
- Combines a 50 MHz 8051-compatible core with a 12-bit ADC (vsCY8C3446PVI-076)
- Supports a broad 1.71 V to 5.5 V operating range (vsCY8C3446PVE-082)
- Combines 64 KB flash with a 48-pin SSOP footprint (vsCY8C3446PVI-102)
- Industrial temperature grade suits controlled embedded environments (vsCY8C3446PVI-092)
Ghi chú thiết kế
Design the supply network for the full 1.71 V to 5.5 V operating range and place the required decoupling capacitors close to the device's power and ground pins. Keep sensitive analog and digital return paths within the manufacturer's recommended layout because PSoC systems combine programmable blocks with conversion circuitry. Review absolute maximum ratings, power-up sequencing, and brownout behavior before selecting the regulator or changing the supply voltage.
Route programming signals, clocks, analog inputs, and communications interfaces according to the manufacturer datasheet pin-description and layout guidance. Place input filtering, ADC source networks, and oscillator components close to their associated pins, while keeping high-current switching loops away from the MCU. A 48-pin SSOP land pattern must match the exact PVI package drawing; do not infer the footprint from a photograph or an unrelated SSOP variant.
Do not substitute the device solely because it has the same family name and package. Verify the -082 ordering code against speed, temperature grade, qualification, pin functions, and programming-device support in the manufacturer ordering information. Firmware may also need adjustment when peripheral configuration or timing differs. Run timing, reset, brownout, and peripheral tests after any same-footprint substitution.
Use controlled impedance and return paths for clock, programming, and communication signals, especially when external memories, displays, or long harnesses are connected. Provide test points for programming and debug access without compromising the analog layout. Confirm oscillator drive and load requirements against the manufacturer datasheet, because incorrect crystal or clock loading can affect timing and communication reliability.
Thông tin tuân thủ
The device is identified as an industrial-temperature microcontroller, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. Obtain the current manufacturer compliance record before environmental certification.