CY8C3865PVI-060 - 67MHz 32KB PSoC 3 MCU | Infineon
MPN: CY8C3865PVI-060 ✓ Hoạt độngCY8C3865PVI-060 Tóm tắt
A programmable system-on-chip, or PSoC, combines a microcontroller core with configurable analog and digital resources on one integrated circuit. PSoC 3 belongs to the hierarchy of microcontrollers, embedded processors, programmable system-on-chips, and semiconductor devices. Unlike a fixed-function microcontroller, its internal signal-chain blocks can be configured by firmware, allowing designers to adapt analog interfaces and digital control logic without changing the PCB.
The CY8C3865PVI-060 provides 32 KB of flash organized as 32K x 8, 4 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash. Its dual datapointer architecture improves data-transfer flexibility, while four flash-protection levels support controlled firmware access. An interrupt system with 27 sources and 8 priority levels supports responsive event handling across embedded control tasks.
The device operates from a 0.5 V to 5.5 V range according to its distributor technical listing. Its 8051-compatible single-core architecture provides a familiar instruction set and an established embedded-control ecosystem. The PSoC architecture allows analog functions such as ADC, DAC, comparators, and timer blocks to be coordinated with programmable digital logic, depending on the selected device configuration and firmware.
Typical uses include industrial control panels, instrumentation, environmental monitoring, consumer interfaces, embedded motor and power controls, communication equipment, and compact control systems requiring mixed-signal handling. Its combination of flash, SRAM, EEPROM, programmable peripherals, and 27 interrupt sources is particularly useful in designs that consolidate several discrete functions into one controller.
Design planning should account for the 48-pin SSOP footprint, available I/O assignments, voltage operating limits, clock configuration, and firmware resource allocation. Review the pin-description table, package drawing, power requirements, and peripheral configuration in the manufacturer datasheet before assigning PCB tracks or selecting decoupling and external support components.
This page organizes the key electrical, memory, package, and application information for CY8C3865PVI-060 and provides a practical framework for comparing same-footprint PSoC 3 MCU options. Engineers should verify firmware, peripheral, lifecycle, and qualification details for the exact production configuration before releasing a design.
Bộ thay thế dễ dàng lắp đặt cho CY8C3865PVI-060 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
CY8C3865PVI-120
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3865PVI-080
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3864PVI-060
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3865PVA-060
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3865PVXI-060
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3865PVI-060 Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit PSoC 3 microcontroller |
| Tần số xung maksimum | 67 MHz |
| CPU Core | Single-core 8051-compatible MCU |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 4 KB |
| Data EEPROM | 1 KB |
| ECC Flash | 8 KB |
| Operating Voltage Range | 0.5 V to 5.5 V |
| Interrupt Sources | 27 sources |
| Interrupt Priority Levels | 8 levels |
| Datapointers | 2 |
| Flash Protection Levels | 4 levels |
| Hộp | 48-pin SSOP |
| Kiểu lắp đặt | Surface mount |
| Peripheral Hub Unit | 1 PHUB with 8 parallel access paths |
Hướng dẫn cấu hình chân CY8C3865PVI-060 48-pin ssop
Cấu hình chân cho CY8C3865PVI-060 (48-pin ssop gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CY8C3865PVI-060.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY8C3865PVI-060 phù hợp cho 6 Áp dụngs: Industrial Instrumentation, Environmental Monitoring, Motor and Power Control, Communication Equipment, Consumer Interface Controller, Embedded Data Acquisition.
Industrial Instrumentation
The CY8C3865PVI-060 fits compact industrial instrumentation that combines signal acquisition, control logic, and local communications. Its 67 MHz clock and 32 KB flash provide space for configuration data and application firmware, while 4 KB of SRAM supports working buffers and state machines. The PSoC 3 architecture also permits analog and digital peripheral resources to be configured around the control task instead of relying on several discrete components. For sensor interfaces, signal conditioning, and operator controls, use the manufacturer pin table to assign the required ADC, timer, communication, and general-purpose I/O functions. Before production, verify the exact peripheral set, electrical limits, operating temperature, and lifecycle status for the selected ordering code.
Được đề xuất
Environmental Monitoring
The CY8C3865PVI-060 is appropriate for environmental monitoring equipment that must sample sensors, apply filtering, and present local status. Its programmable analog resources can support sensor interfaces, while the 8051-compatible core handles acquisition sequencing and threshold logic. The 27-source, 8-level interrupt system allows timer, communication, and external events to be prioritized, and 1 KB of EEPROM plus 8 KB of ECC flash can preserve configuration and integrity-protected records. For battery-powered deployments, evaluate the available 0.5 V to 5.5 V operating range against regulator behavior and sleep requirements. Use the manufacturer datasheet to confirm ADC performance, temperature limits, wake-up sources, and the final peripheral configuration before fixing the PCB.
Được đề xuất
Motor and Power Control
The CY8C3865PVI-060 can serve as the supervisory controller in a compact motor-control or power-sequencing system. Its 67 MHz processing capability supports timing-sensitive control loops, and the programmable digital blocks can coordinate pulse-width generation, fault inputs, and communications. The 48-pin SSOP package provides access to the required control and status signals while keeping the controller separate from high-current power stages. Design the power path so switching-node transients do not enter sensitive controller ground or supply pins, and use external drivers where required by current and isolation needs. Confirm timer resolution, analog trigger performance, operating temperature, and pin availability in the manufacturer documentation before releasing the control board.
Được đề xuất
Communication Equipment
The CY8C3865PVI-060 is suitable for embedded communication equipment that requires protocol handling, local control, and configurable I/O. Its 32 KB flash stores firmware and communication tables, while 4 KB of SRAM accommodates packet buffers and interface state. Eight interrupt-priority levels help separate time-sensitive reception, transmission, and supervisory events. PSoC 3 peripheral programmability can simplify designs that combine serial communication, timers, and status inputs without dedicating separate controllers to each function. The device should be paired with a qualified transceiver or network controller appropriate to the physical layer. Verify the selected I/O mux, clock source, voltage thresholds, and peripheral configuration in the pin-description and clock-system sections of the manufacturer datasheet.
Được đề xuất
Consumer Interface Controller
The CY8C3865PVI-060 can implement a compact consumer interface controller for products combining touch, display, lighting, or button handling. Its programmable analog blocks may be configured for sensing functions, while digital resources manage indicators and user inputs. The 32 KB flash and 4 KB SRAM provide sufficient memory for a dedicated user-interface task and local configuration. Because the SSOP package exposes a finite number of pins, complete the peripheral mapping before fixing the PCB and avoid assigning two functions to the same terminal. Also evaluate display timing, update rate, touch-response requirements, ESD strategy, and standby power. Confirm supported peripherals, operating temperature, and lifecycle status for the production ordering code.
Được đề xuất
Embedded Data Acquisition
The CY8C3865PVI-060 supports embedded data-acquisition designs that must combine sampling, buffering, thresholding, and data transfer. The 67 MHz clock supports efficient peripheral coordination, and the dual-datapointer architecture assists moving data between memory spaces. Its interrupt controller provides 27 sources with 8 priority levels for separating acquisition timing from communications and housekeeping. Programmable analog and digital blocks allow signal-chain functions to be consolidated within one controller, although the precise sampling characteristics must be checked against application requirements. Use the manufacturer datasheet to verify converter resolution, acquisition timing, input limits, reference configuration, and package pin assignments. Validate signal integrity and timing at the populated-board level rather than assuming peripheral integration eliminates all analog-layout constraints.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY8C3865PVI-060 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY8C3865PVI-120 | CY8C3865PVI-080 | CY8C3864PVI-060 | CY8C3865PVA-060 | CY8C3865PVXI-060 |
|---|---|---|---|---|---|---|
| Package | 48-pin SSOP | 48-pin SSOP | 48-pin SSOP | 48-pin SSOP | 48-pin SSOP | 48-pin SSOP |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Product Family | PSoC 3 CY8C38xx | PSoC 3 CY8C38xx | PSoC 3 CY8C38xx | PSoC 3 CY8C38xx | PSoC 3 CY8C38xx | PSoC 3 CY8C38xx |
Bảo phân biệt quan trọng
- Substantial flash and SRAM resources within an 8-bit mixed-signal controller (vsCY8C3244PVA-126)
- Higher documented clock capability within the same PSoC 3 family (vsCY8C3665PVI-080)
- Rich interrupt and integrity-protected memory support for embedded control (vsCY8C3244PVA-126)
- Consistent 48-pin SSOP footprint across same-family alternatives (vsCY8C3865PVI-120)
Ghi chú thiết kế
Treat the 48-pin SSOP footprint as a constrained routing problem. Assign pins by priority for power, ground, programming, high-speed communication, and analog inputs before placing optional functions. Keep traces short where the selected peripheral operates at higher clock rates, and consult the manufacturer package drawing for lead span, body width, and seating-plane details. Verify the actual ordering-code dimensions before releasing artwork rather than relying only on the generic SSOP name.
Use the manufacturer power-supply and decoupling recommendations for the selected operating voltage and clock configuration. Place local bypass capacitance at the supply pins and provide a low-impedance return path for switching and digital currents. Because the listed operating range is 0.5 V to 5.5 V, do not assume every internal peripheral or external interface is valid across that entire range; check each rail and signal against the electrical-characteristics tables.
Separate sensitive analog inputs and references from digital clock, switching, and high-current routing. Use a coherent ground strategy, keep return paths continuous, and assign PSoC analog and digital resources only after checking the package pin mux. For mixed-signal boards, reserve quiet analog areas and avoid routing communication or timing signals beneath sensitive inputs. Validate the completed layout for crosstalk, reference stability, and signal-integrity margins.
Do not treat a shared package and family name as sufficient evidence that two orderable MPNs are interchangeable. Compare clock grade, memory configuration, peripheral availability, temperature grade, package dimensions, and programming requirements in the manufacturer ordering guide. This caution is especially important when using the -080, -120, PVA, or PVXI ordering options as substitutes for CY8C3865PVI-060, because ordering-code differences can alter otherwise similar board requirements.
Thông tin tuân thủ
The manufacturer and distributor listings identify the device and its technical attributes but do not state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes using the current manufacturer product documentation and applicable quality records before qualification.