CY8C3666AXI-052 - 67MHz 8051 PSoC 3 MCU | Infineon
MPN: CY8C3666AXI-052 ✓ Hoạt độngCY8C3666AXI-052 Tóm tắt
A programmable system-on-chip, or PSoC, extends the conventional microcontroller architecture by placing configurable digital blocks and analog peripherals on the same silicon as the processor core. The CY8C36xx device family belongs to the hierarchy of embedded controllers, specifically 8-bit 8051 microcontrollers and programmable system-on-chip devices. This integration allows designers to implement control functions close to the sensor or actuator rather than relying entirely on discrete logic.
The CY8C3666AXI-052 provides 64 KB of flash, 8 KB of SRAM, dual datapointers, four flash protection levels, 2 KB of data EEPROM, and 8 KB of ECC flash. Its interrupt controller supports 27 sources with eight priority levels. The peripheral hub includes eight parallel access paths, while the 24 universal digital blocks supply programmable logic for timers, counters, state machines, serial communication, and other real-time control functions.
The device also includes a configurable ADC unit, communication peripherals, and programmable digital resources. Its 67 MHz maximum clock rate gives the 8051 core substantially more processing headroom than conventional low-clock microcontrollers, while the 24 universal digital blocks offload deterministic functions from software. Together, these resources support efficient mixed-signal designs without requiring a separate programmable logic device for every peripheral function.
Typical uses include industrial control modules, sensor acquisition systems, compact motor controllers, communication equipment, consumer appliances, and embedded measurement instruments. The combination of low-power operation, programmable peripherals, and a 100-pin TQFP footprint is particularly useful when a design needs both analog input handling and deterministic digital control in a modest board area.
PCB implementation requires careful attention to the 100-pin package and its exposed supply, ground, clock, programming, and peripheral assignments. Follow the manufacturer pin-description and recommended decoupling tables when assigning tracks, and reserve the programming interface for firmware updates and production programming. Verify the selected low-power and analog operating modes against the electrical limits before releasing the layout.
This product page combines the manufacturer's device description with practical application guidance, parameter comparisons, and sourcing information. It is intended to help engineers evaluate the CY8C3666AXI-052 against same-package alternatives while accounting for memory, clock rate, peripheral configuration, package geometry, and firmware portability.
Bộ thay thế dễ dàng lắp đặt cho CY8C3666AXI-052 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
CY8C3666AXA-052
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3666AXI-052 Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit PSoC 3 microcontroller |
| Processor Core | Single-core 8051 |
| Maximum CPU Frequency | 67 MHz |
| Program Flash Memory | 64 KB |
| Program Memory Organization | 64K x 8 bits |
| SRAM | 8 KB |
| Data EEPROM | 2 KB |
| ECC Flash | 8 KB |
| Universal Digital Blocks | 24 blocks |
| Operating Voltage Range | 0.5 V to 5.5 V |
| ADC | 1 configurable ADC unit |
| Datapointers | 2 |
| Interrupt Sources | 27 sources |
| Interrupt Priority Levels | 8 levels |
| Peripheral Hub Access Paths | 8 parallel paths |
| Flash Protection Levels | 4 levels |
| Hộp | 100-TQFP, 14 mm x 14 mm |
| Package Type | TQFP surface-mount package |
| Số chân | 100 pins |
Hướng dẫn cấu hình chân CY8C3666AXI-052 tqfp surface-mount package
Cấu hình chân cho CY8C3666AXI-052 (tqfp surface-mount package gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CY8C3666AXI-052.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY8C3666AXI-052 phù hợp cho 6 Áp dụngs: Industrial Sensor Acquisition, Compact Motor Control, Communication Equipment, Consumer Appliance Control, Programmable Logic Integration, Test and Measurement Instrument.
Industrial Sensor Acquisition
The CY8C3666AXI-052 fits sensor-acquisition and industrial monitoring designs that require fast sampling, programmable control logic, and local signal processing. Its configurable ADC unit provides an analog input path, while 24 universal digital blocks can support counters, timing functions, state machines, and communication routing without relying entirely on CPU loops. The 67 MHz 8051 core can supervise acquisition, filter results, and manage data transfer, and 64 KB of flash accommodates application firmware and configuration data. A practical design should define the acquisition timing, ADC trigger source, scaling, calibration method, and update rate before assigning the UDBs, because each configuration consumes internal routing resources and affects firmware architecture.
Được đề xuất
Compact Motor Control
The CY8C3666AXI-052 is appropriate for compact motor-control modules where timing accuracy, programmable logic, and a limited board area are important. Its 24 universal digital blocks can implement capture, compare, pulse-width modulation, and deterministic sequencing functions, reducing the load on the 8051 core and improving responsiveness. The 8-bit processor can coordinate direction decisions, handle sensor inputs, and supervise protection logic. With 64 KB of flash and 8 KB of SRAM, the device also supports structured state machines and moderate protocol handling. The control design must verify motor timing, input filtering, fault shutdown paths, and maximum pin transition requirements against the chosen PSoC configuration.
Được đề xuất
Communication Equipment
The CY8C3666AXI-052 can serve as the control processor in compact communication equipment where protocol handling, timing, and auxiliary digital functions must share a constrained footprint. Its 67 MHz 8051 core provides processing capacity for protocol stacks and system supervision, while the universal digital blocks can offload repetitive bit timing, framing, or peripheral control tasks. The 100-pin TQFP package exposes a broad selection of I/O for a transceiver interface, status indicators, and configuration controls. Firmware planning should account for the 8 KB SRAM limit and define buffer ownership carefully. Signal integrity, isolation, grounding, and logic-level compatibility should be evaluated at the board level rather than inferred from the MCU specifications alone.
Được đề xuất
Consumer Appliance Control
The CY8C3666AXI-052 is suitable for appliance-control boards that combine user inputs, analog sensing, timing functions, and compact user-interface behavior. The 8051 core can execute the main control sequence, while 24 universal digital blocks can manage display scanning, button events, periodic timers, or motor-command sequencing. Its 64 KB flash capacity supports embedded application code, and the 0.5 V to 5.5 V operating range provides flexibility across internal voltage domains. Engineers should keep power sequencing deterministic, validate brownout behavior, and confirm the availability of each peripheral used by the appliance. Low-power requirements may influence whether the CPU, UDBs, and analog resources should remain clocked continuously or be placed into supported sleep states.
Được đề xuất
Programmable Logic Integration
The CY8C3666AXI-052 can consolidate programmable logic and microcontroller functions in systems that would otherwise divide timing-sensitive logic among a separate FPGA or CPLD and a conventional MCU. Its 24 universal digital blocks provide configurable combinational and sequential functions that can implement counters, decoders, state machines, and interface timing. The 8051 core can handle higher-level decisions, diagnostics, and configuration, while the 100-pin TQFP package simplifies access to numerous external signals. The key design task is selecting a PSoC configuration that satisfies every required clock domain and pin route. If the original logic requires frequencies, widths, or deterministic guarantees outside the selected block resources, a separate programmable-logic device may still be necessary.
Được đề xuất
Test and Measurement Instrument
The CY8C3666AXI-052 fits compact measurement instruments that require deterministic control, configurable analog input handling, and multiple digital functions. The configurable ADC can acquire a measured quantity, the universal digital blocks can implement trigger sequencing or timing assistance, and the 8051 core can calculate results and present them through a local interface. Its 67 MHz clock rate supports responsive control without requiring a large processor, and 64 KB of flash provides room for calibration tables and test routines. A production instrument should establish analog reference and gain requirements, measurement latency, calibration storage, and fault detection before hardware design. The 100-pin footprint also provides enough connections for external memory, communications, and precision components when the required pin mapping permits.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY8C3666AXI-052 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Consider CY8C3666AXA-052 when its ordering information satisfies all temperature, qualification, and lifecycle requirements. The documented core, clock, flash, package, and device-family characteristics align closely, making it the closest same-package candidate for PCB reuse. Review the complete manufacturer ordering table and pin descriptions before release because the visible ordering-code difference does not expose every commercial or grade-specific parameter.
Choose a different MCU when the design needs a lower pin count, a different processor ecosystem, larger RAM, or a peripheral set outside the CY8C36xx family. In this case, board reuse, firmware migration, and long-term tool support will usually outweigh the benefits of retaining the PSoC architecture.
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY8C3666AXA-052 |
|---|---|---|
| Package | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | Single-core 8051 | Single-core 8051 |
| Maximum CPU Frequency | 67 MHz | 67 MHz |
| Program Flash | 64 KB | 64 KB |
| Microcontroller Type | 8-bit PSoC 3 | 8-bit PSoC 3 |
| Flash Organization | 64K x 8 bits | 64K x 8 bits |
Bảo phân biệt quan trọng
- Combines a 67 MHz 8051 core with programmable digital resources (vsCY8C3666AXA-052)
- Large programmable logic capacity for a compact mixed-signal design (vsCY8C3666AXA-052)
- Integrated analog and embedded control resources (vsCY8C3666AXA-052)
Ghi chú thiết kế
Use the manufacturer’s 100-TQFP land pattern and pin-description table when laying out the board. The package has no mechanical lead-free strain-relief allowance, so use the recommended footprint and land geometry rather than substituting a generic TQFP pattern. Pay particular attention to exposed supply and ground assignments, clock pins, programming signals, and any pins left unconnected in the selected device configuration.
Follow the manufacturer’s recommended decoupling network and place each required capacitor close to its associated power pin. The device operates across 0.5 V to 5.5 V, so the chosen regulator, supply sequencing, and external level-shifting arrangement must match the configured operating point. Check brownout and power-down behavior in software as well, particularly when the 8051 core and programmable digital blocks are expected to stop and restart in a defined sequence.
Assign clocking and sensitive analog connections with short return paths and away from fast switching nodes. If the 67 MHz operating mode is used, verify trace topology, load capacitance, and the clock source recommended by the device configuration. The configurable ADC also requires deliberate source impedance and grounding treatment; validate acquisition accuracy on the assembled board rather than relying only on nominal conversion timing.
Do not assume that a matching package suffix guarantees an immediate replacement. Before substituting CY8C3666AXA-052, compare the complete ordering information, temperature grade, qualification requirements, pin descriptions, clock limits, peripheral resources, and firmware configuration. Review the manufacturer change-notification information and perform a representative hardware and firmware validation cycle before approving the alternate MPN for production.
Thông tin tuân thủ
Compliance declarations are not stated in the available product information and must be confirmed through the manufacturer’s product documentation or ordering materials.