Infineon

CY8C3666AXI-052 - 67MHz 8051 PSoC 3 MCU | Infineon

料号: CY8C3666AXI-052 ✓ 量产中
0.5 V to 5.5 V Vdss 100-TQFP, 14 mm x 14 mm Package 67 MHz Speed 64 KB Memory
最小起订量: 1 |

CY8C3666AXI-052 概述

The Infineon CY8C3666AXI-052 is an 8-bit PSoC 3 microcontroller with a single-core 8051 processor operating up to 67 MHz, 64 KB of flash memory, 24 universal digital blocks, and a 100-pin TQFP package measuring 14 mm by 14 mm. It operates from 0.5 V to 5.5 V and combines programmable digital logic, analog conversion resources, and dedicated microcontroller peripherals in one device.

A programmable system-on-chip, or PSoC, extends the conventional microcontroller architecture by placing configurable digital blocks and analog peripherals on the same silicon as the processor core. The CY8C36xx device family belongs to the hierarchy of embedded controllers, specifically 8-bit 8051 microcontrollers and programmable system-on-chip devices. This integration allows designers to implement control functions close to the sensor or actuator rather than relying entirely on discrete logic.

The CY8C3666AXI-052 provides 64 KB of flash, 8 KB of SRAM, dual datapointers, four flash protection levels, 2 KB of data EEPROM, and 8 KB of ECC flash. Its interrupt controller supports 27 sources with eight priority levels. The peripheral hub includes eight parallel access paths, while the 24 universal digital blocks supply programmable logic for timers, counters, state machines, serial communication, and other real-time control functions.

The device also includes a configurable ADC unit, communication peripherals, and programmable digital resources. Its 67 MHz maximum clock rate gives the 8051 core substantially more processing headroom than conventional low-clock microcontrollers, while the 24 universal digital blocks offload deterministic functions from software. Together, these resources support efficient mixed-signal designs without requiring a separate programmable logic device for every peripheral function.

Typical uses include industrial control modules, sensor acquisition systems, compact motor controllers, communication equipment, consumer appliances, and embedded measurement instruments. The combination of low-power operation, programmable peripherals, and a 100-pin TQFP footprint is particularly useful when a design needs both analog input handling and deterministic digital control in a modest board area.

PCB implementation requires careful attention to the 100-pin package and its exposed supply, ground, clock, programming, and peripheral assignments. Follow the manufacturer pin-description and recommended decoupling tables when assigning tracks, and reserve the programming interface for firmware updates and production programming. Verify the selected low-power and analog operating modes against the electrical limits before releasing the layout.

This product page combines the manufacturer's device description with practical application guidance, parameter comparisons, and sourcing information. It is intended to help engineers evaluate the CY8C3666AXI-052 against same-package alternatives while accounting for memory, clock rate, peripheral configuration, package geometry, and firmware portability.

直接替换替代料: CY8C3666AXI-052 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

CY8C3666AXA-052

✅ 直接替换
📦 100-TQFP (14x14 mm)
Ordering-code difference only in the listed attributes; both provide an 8051 core, 67 MHz maximum clock, 64 KB flash, and 100-pin 14x14 mm TQFP package

📋 参考替代料(不在目录中)

CY8C3666AXI-052 最大额定值与电气特性

Product Type 8-bit PSoC 3 microcontroller
Processor Core Single-core 8051
Maximum CPU Frequency 67 MHz
Program Flash Memory 64 KB
Program Memory Organization 64K x 8 bits
SRAM 8 KB
Data EEPROM 2 KB
ECC Flash 8 KB
Universal Digital Blocks 24 blocks
Operating Voltage Range 0.5 V to 5.5 V
ADC 1 configurable ADC unit
Datapointers 2
Interrupt Sources 27 sources
Interrupt Priority Levels 8 levels
Peripheral Hub Access Paths 8 parallel paths
Flash Protection Levels 4 levels
封装 100-TQFP, 14 mm x 14 mm
Package Type TQFP surface-mount package
引脚数量 100 pins

CY8C3666AXI-052 tqfp surface-mount package 引脚配置指南

CY8C3666AXI-052(tqfp surface-mount package 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

CY8C3666AXI-052 的 tqfp surface-mount package 封装引脚图

暂无详细引脚数据: CY8C3666AXI-052.

请参阅 数据手册 以查看完整引脚配置。

典型应用

CY8C3666AXI-052 适用于 6 应用s: Industrial Sensor Acquisition, Compact Motor Control, Communication Equipment, Consumer Appliance Control, Programmable Logic Integration, Test and Measurement Instrument.

🏭

Industrial Sensor Acquisition

The CY8C3666AXI-052 fits sensor-acquisition and industrial monitoring designs that require fast sampling, programmable control logic, and local signal processing. Its configurable ADC unit provides an analog input path, while 24 universal digital blocks can support counters, timing functions, state machines, and communication routing without relying entirely on CPU loops. The 67 MHz 8051 core can supervise acquisition, filter results, and manage data transfer, and 64 KB of flash accommodates application firmware and configuration data. A practical design should define the acquisition timing, ADC trigger source, scaling, calibration method, and update rate before assigning the UDBs, because each configuration consumes internal routing resources and affects firmware architecture.

⚡

Compact Motor Control

The CY8C3666AXI-052 is appropriate for compact motor-control modules where timing accuracy, programmable logic, and a limited board area are important. Its 24 universal digital blocks can implement capture, compare, pulse-width modulation, and deterministic sequencing functions, reducing the load on the 8051 core and improving responsiveness. The 8-bit processor can coordinate direction decisions, handle sensor inputs, and supervise protection logic. With 64 KB of flash and 8 KB of SRAM, the device also supports structured state machines and moderate protocol handling. The control design must verify motor timing, input filtering, fault shutdown paths, and maximum pin transition requirements against the chosen PSoC configuration.

🌐

Communication Equipment

The CY8C3666AXI-052 can serve as the control processor in compact communication equipment where protocol handling, timing, and auxiliary digital functions must share a constrained footprint. Its 67 MHz 8051 core provides processing capacity for protocol stacks and system supervision, while the universal digital blocks can offload repetitive bit timing, framing, or peripheral control tasks. The 100-pin TQFP package exposes a broad selection of I/O for a transceiver interface, status indicators, and configuration controls. Firmware planning should account for the 8 KB SRAM limit and define buffer ownership carefully. Signal integrity, isolation, grounding, and logic-level compatibility should be evaluated at the board level rather than inferred from the MCU specifications alone.

🏠

Consumer Appliance Control

The CY8C3666AXI-052 is suitable for appliance-control boards that combine user inputs, analog sensing, timing functions, and compact user-interface behavior. The 8051 core can execute the main control sequence, while 24 universal digital blocks can manage display scanning, button events, periodic timers, or motor-command sequencing. Its 64 KB flash capacity supports embedded application code, and the 0.5 V to 5.5 V operating range provides flexibility across internal voltage domains. Engineers should keep power sequencing deterministic, validate brownout behavior, and confirm the availability of each peripheral used by the appliance. Low-power requirements may influence whether the CPU, UDBs, and analog resources should remain clocked continuously or be placed into supported sleep states.

🧩

Programmable Logic Integration

The CY8C3666AXI-052 can consolidate programmable logic and microcontroller functions in systems that would otherwise divide timing-sensitive logic among a separate FPGA or CPLD and a conventional MCU. Its 24 universal digital blocks provide configurable combinational and sequential functions that can implement counters, decoders, state machines, and interface timing. The 8051 core can handle higher-level decisions, diagnostics, and configuration, while the 100-pin TQFP package simplifies access to numerous external signals. The key design task is selecting a PSoC configuration that satisfies every required clock domain and pin route. If the original logic requires frequencies, widths, or deterministic guarantees outside the selected block resources, a separate programmable-logic device may still be necessary.

🔧

Test and Measurement Instrument

The CY8C3666AXI-052 fits compact measurement instruments that require deterministic control, configurable analog input handling, and multiple digital functions. The configurable ADC can acquire a measured quantity, the universal digital blocks can implement trigger sequencing or timing assistance, and the 8051 core can calculate results and present them through a local interface. Its 67 MHz clock rate supports responsive control without requiring a large processor, and 64 KB of flash provides room for calibration tables and test routines. A production instrument should establish analog reference and gain requirements, measurement latency, calibration storage, and fault detection before hardware design. The 100-pin footprint also provides enough connections for external memory, communications, and precision components when the required pin mapping permits.

推荐产品汇总

CY8C3666AXI-052 Infineon 用于: Industrial Sensor Acquisition, Compact Motor Control, Communication Equipment, Consumer Appliance Control, Programmable Logic Integration, Test and Measurement Instrument CY8C3666AXA-052 Same-family controller option 用于: Industrial Sensor Acquisition, Communication Equipment, Test and Measurement Instrument
What is the CY8C3666AXI-052?
The CY8C3666AXI-052 is an 8-bit PSoC 3 microcontroller from Infineon Technologies with a single-core 8051 processor, 64 KB of flash, 8 KB of SRAM, 24 universal digital blocks, and a maximum operating frequency of 67 MHz. According to the Infineon product page, the device also includes a configurable ADC unit. Its combination of programmable digital blocks, analog conversion resources, and conventional MCU peripherals is intended for embedded control and mixed-signal designs.
What are the key specifications of CY8C3666AXI-052 that engineers should know?
The CY8C3666AXI-052 combines an 8-bit 8051 core, 67 MHz maximum clock, 64 KB flash, 8 KB SRAM, 2 KB data EEPROM, 8 KB ECC flash, and 24 universal digital blocks. The Infineon device listing specifies a 0.5 V to 5.5 V operating range and a 100-pin TQFP package measuring 14 mm by 14 mm. Its interrupt system handles 27 sources and eight priority levels, while the peripheral hub provides eight parallel access paths.
What is the operating voltage range of CY8C3666AXI-052?
The CY8C3666AXI-052 operates from 0.5 V to 5.5 V. This voltage range supports low-voltage digital systems as well as designs operating from conventional 3.3 V or 5 V rails. The Infineon product listing identifies the MCU as an 8-bit 8051 device with a 67 MHz maximum clock rate. Confirm that every selected external peripheral, communication interface, and programming accessory supports the voltage used at its corresponding pins.
Where can I find the CY8C3666AXI-052 datasheet and pinout?
The official CY8C3666AXI-052 product page is the primary starting point for the datasheet, ordering information, parameters, and device resources. The manufacturer describes the part as a PSoC 36xxx microcontroller with an 8051 core, 64 KB of flash, and 24 digital blocks. Use the package drawing and pin-description table in the manufacturer datasheet to assign the 100 TQFP pins, because a partial pin list can lead to incorrect power, ground, programming, or peripheral connections.
How much flash and SRAM does the CY8C3666AXI-052 have?
The CY8C3666AXI-052 contains 64 KB of flash memory, 8 KB of SRAM, 2 KB of data EEPROM, and 8 KB of ECC flash. The flash is organized as 64K by 8 bits, and the device offers four flash protection levels. The Infineon product page confirms the 64 KB flash capacity, while the device resource listing identifies the SRAM, EEPROM, and ECC-flash capacities. Account for boot code, configuration data, and update space when sizing application firmware.
What can replace the CY8C3666AXI-052 on the same PCB?
The CY8C3666AXA-052 is the closest documented same-package alternative because it retains the 8051 core, 67 MHz clock, 64 KB flash, and 100-pin 14 mm by 14 mm TQFP format. The change in ordering code must still be checked against temperature grade, qualification, and the complete manufacturer pin table. A package match alone does not establish firmware or qualification equivalence, so validate the replacement before production release.
CY8C3666AXI-052 vs CY8C3666AXA-052 — which is better?
Both devices are documented as 8051 PSoC 3 MCUs with a 67 MHz maximum clock, 64 KB flash, and a 100-pin 14 mm by 14 mm TQFP package. The visible ordering-code difference does not by itself identify a functional change, so the decision should be based on the manufacturer’s complete ordering table and any grade-specific requirements. Verify temperature range, qualification, and lifecycle status for the exact replacement suffix before committing the PCB.
When should I choose the CY8C3666AXI-052 over another 8-bit MCU?
Choose the CY8C3666AXI-052 when a design benefits from a fast 8051 core, 24 universal digital blocks, and a configurable ADC within one 100-pin device. The programmable digital blocks can implement timing and interface functions while the core handles supervisory control, reducing the need for separate programmable logic in suitable designs. It is less compelling when a lower-pin-count controller, a different processor architecture, or an established application ecosystem is required.
Is the CY8C3666AXI-052 suitable for mixed-signal control systems?
The CY8C3666AXI-052 is suitable for mixed-signal control systems that benefit from a configurable ADC, 24 programmable digital blocks, and an integrated 8051 core. The Infineon device listing confirms one configurable ADC unit, while the device resource summary identifies 27 interrupt sources and eight peripheral-hub access paths. Validate analog acquisition timing, input limits, calibration requirements, and firmware support for the configured peripheral blocks before production.
What are the most important CY8C3666AXI-052 design considerations?
The most important considerations are the 100-pin TQFP footprint, 0.5 V to 5.5 V supply range, clock implementation, programming interface, and peripheral-pin allocation. Follow the manufacturer’s recommended decoupling and pin-connection tables, and reserve programming access for manufacturing and updates. Treat the 24 universal digital blocks as configurable resources whose final clocking and pin routing must be reviewed in the device configuration and firmware.
Does the CY8C3666AXI-052 need an external programmable logic device?
The CY8C3666AXI-052 may eliminate a separate programmable logic device when its 24 universal digital blocks can implement the required timing, state-machine, counter, or interface functions. The MCU also offers a configurable ADC and communication peripherals, allowing compact control designs to combine sensing, logic, and processing. It remains necessary to compare required clock rates, I/O counts, timing guarantees, and development-tool support against the programmable logic originally assigned to the design.
What is the lead time for CY8C3666AXI-052?
Request the current lead time, minimum order quantity, and available package option through the Request a Quote form on this page. Lead time can vary with order volume, manufacturing conditions, and the exact ordering code, so it should be confirmed for each procurement request. The manufacturer’s product page is also appropriate for confirming the currently documented orderable configuration and lifecycle status.
Is CY8C3666AXI-052 in stock?
Use the Request a Quote form on this page to request current inventory, allocation, and shipment timing for CY8C3666AXI-052. Stock status changes independently of the technical specifications, so an availability response should be obtained for the exact MPN and required quantity. The manufacturer product page remains the authoritative reference for the device configuration and ordering information.
How much does the CY8C3666AXI-052 cost?
Request a current quotation for the CY8C3666AXI-052 through the Request a Quote form on this page. The quote should specify the exact MPN, quantity, package option, and delivery requirements so that obsolete, allocated, or volume-dependent conditions are handled correctly. The structured pricing area on the page is the appropriate place to review any qualifying commercial tiers when they are available.
What can replace CY8C3666AXI-052 in an embedded control design?
The CY8C3666AXA-052 is the most direct documented replacement candidate because it has the same 8051 architecture, 67 MHz maximum clock, 64 KB flash configuration, and 100-pin TQFP package. It is suitable for drop-in consideration only after checking the complete ordering information, temperature grade, qualification, pin table, and firmware implications. If those checks pass, the existing board layout can generally be retained.
Is the Infineon CY8C3666AXI-052 still active?
The Infineon product page lists CY8C3666AXI-052 as an orderable product, and no end-of-life or obsolete marking appears in the available product information. Treat that listing as the current lifecycle reference. For a time-sensitive production program, confirm the lifecycle status and any change notifications with the manufacturer when requesting a quotation.

工程参考数据: CY8C3666AXI-052 ——对比、设计指导和合规信息。

选型指南

Choose CY8C3666AXI-052 when an embedded design benefits from the combination of a 67 MHz 8051 core, 24 universal digital blocks, configurable analog conversion, and a 100-pin TQFP package. It is especially attractive when timing or state-machine functions can be implemented in programmable logic instead of consuming extensive CPU execution time. The 64 KB flash and 8 KB SRAM provide adequate room for focused control, acquisition, or communication firmware without requiring a larger processor architecture.

Consider CY8C3666AXA-052 when its ordering information satisfies all temperature, qualification, and lifecycle requirements. The documented core, clock, flash, package, and device-family characteristics align closely, making it the closest same-package candidate for PCB reuse. Review the complete manufacturer ordering table and pin descriptions before release because the visible ordering-code difference does not expose every commercial or grade-specific parameter.

Choose a different MCU when the design needs a lower pin count, a different processor ecosystem, larger RAM, or a peripheral set outside the CY8C36xx family. In this case, board reuse, firmware migration, and long-term tool support will usually outweigh the benefits of retaining the PSoC architecture.

与替代料对比

参数 本产品 CY8C3666AXA-052
Package 100-TQFP (14x14 mm) 100-TQFP (14x14 mm)
Brand Infineon Technologies Infineon Technologies
Processor Core Single-core 8051 Single-core 8051
Maximum CPU Frequency 67 MHz 67 MHz
Program Flash 64 KB 64 KB
Microcontroller Type 8-bit PSoC 3 8-bit PSoC 3
Flash Organization 64K x 8 bits 64K x 8 bits

关键差异点

  • Combines a 67 MHz 8051 core with programmable digital resources (对比 CY8C3666AXA-052)
  • Large programmable logic capacity for a compact mixed-signal design (对比 CY8C3666AXA-052)
  • Integrated analog and embedded control resources (对比 CY8C3666AXA-052)

设计说明

Use the manufacturer’s 100-TQFP land pattern and pin-description table when laying out the board. The package has no mechanical lead-free strain-relief allowance, so use the recommended footprint and land geometry rather than substituting a generic TQFP pattern. Pay particular attention to exposed supply and ground assignments, clock pins, programming signals, and any pins left unconnected in the selected device configuration.

Follow the manufacturer’s recommended decoupling network and place each required capacitor close to its associated power pin. The device operates across 0.5 V to 5.5 V, so the chosen regulator, supply sequencing, and external level-shifting arrangement must match the configured operating point. Check brownout and power-down behavior in software as well, particularly when the 8051 core and programmable digital blocks are expected to stop and restart in a defined sequence.

Assign clocking and sensitive analog connections with short return paths and away from fast switching nodes. If the 67 MHz operating mode is used, verify trace topology, load capacitance, and the clock source recommended by the device configuration. The configurable ADC also requires deliberate source impedance and grounding treatment; validate acquisition accuracy on the assembled board rather than relying only on nominal conversion timing.

Do not assume that a matching package suffix guarantees an immediate replacement. Before substituting CY8C3666AXA-052, compare the complete ordering information, temperature grade, qualification requirements, pin descriptions, clock limits, peripheral resources, and firmware configuration. Review the manufacturer change-notification information and perform a representative hardware and firmware validation cycle before approving the alternate MPN for production.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance declarations are not stated in the available product information and must be confirmed through the manufacturer’s product documentation or ordering materials.

相关搜索

CY8C3666AXI-052 datasheet CY8C3666AXI-052 pinout CY8C3666AXI-052 datasheet pdf CY8C3666AXI-052 specifications Infineon CY8C3666AXI-052 CY8C3666AXI-052 equivalent CY8C3666AXI-052 replacement CY8C3666AXI-052 cross reference CY8C3666AXI-052 vs CY8C3666AXA-052 CY8C3666AXI-052 footprint CY8C3666AXI-052 application circuit CY8C3666AXI-052 price CY8C3666AXI-052 stock CY8C3666AXI-052 TQFP pinout CY8C36xx 67MHz 8051 microcontroller

相关元器件 & 术语

Infineon Technologies Cypress Semiconductor CY8C3666AXI-052 CY8C3666AXA-052 PSoC 3 PSoC 36xxx 8051 microcontroller 8-bit microcontroller microcontroller programmable system-on-chip universal digital block UDB configurable ADC 67 MHz 64 KB flash 8 KB SRAM peripheral hub TQFP-100 100-pin surface-mount package 0.5 V to 5.5 V operating range industrial sensor acquisition mixed-signal control programmable logic integration motor control interrupt controller
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情