DP83849IDVS - Dual-Port 10/100 Ethernet PHY | Texas Instruments
MPN: DP83849IDVS ✓ Hoạt độngDP83849IDVS Tóm tắt
An Ethernet PHY is a physical-layer transceiver that converts digital data into electrical or optical signaling suitable for network transmission and receives signals back into digital data. In the product hierarchy, the DP83849IDVS is an Ethernet PHY transceiver, a network interface IC, an integrated circuit, and a semiconductor. Its dual-port architecture supports equipment that needs redundant connectivity, management access, or simultaneous links within a single device.
The verified manufacturer information identifies the DP83849IDVS as a dual-port 10/100-Mbps Ethernet PHY transceiver with fiber support. Its -40°C to +85°C industrial-temperature range supports deployment in factory automation, industrial control, communications equipment, and network infrastructure. The 80-pin TQFP package provides access to the PHY functions, power connections, management interfaces, and copper or fiber-related signaling required by the device.
The dual-port configuration is the primary technical distinction. Two physical-layer channels can reduce the number of separate Ethernet PHY packages needed in a multi-port system, simplifying board allocation while preserving independent 10/100-Mbps operation. Detailed electrical characteristics, register functions, media interfaces, and internal architecture are not present in the supplied source excerpts and therefore remain subject to the complete manufacturer datasheet.
Typical uses include industrial Ethernet switches, remote monitoring stations, factory-floor controllers, communications equipment, and network-interface modules. The DP83849IDVS is particularly relevant where two copper ports and fiber-capable connectivity must coexist in an industrial-temperature design. The manufacturer also identifies the DP83849IDIFVS-EVK as a related evaluation platform for dual industrial-temperature PHY operation with fiber support.
Designers should verify the complete pin assignment, recommended transformer or magnetics interface, strap resistors, clocking requirements, and decoupling network against the manufacturer datasheet before layout. Because the supplied data identifies a 12 mm by 12 mm 80-pin TQFP package but does not provide the complete 80-pin pinout, the package drawing cannot be safely populated here.
This page combines verified manufacturer and distributor information, pricing availability status, same-family alternatives, comparison parameters, and application guidance. It also distinguishes documented facts from engineering data that remains unavailable, helping engineers evaluate the DP83849IDVS without confusing approximate or unsupported specifications.
Bộ thay thế dễ dàng lắp đặt cho DP83849IDVS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
DP83849IFVS/NOPB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DP83849IFVSX/NOPB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DP83849IDVS Thông số kỹ thuật
| Product Type | Dual-port Ethernet PHY transceiver |
| Ethernet Speed | 10/100 Mbps |
| Number of Ports | 2 ports |
| Temperature Grade | Industrial temperature |
| Nhiệt độ hoạt động | -40°C to +85°C |
| Fiber Support | Supported |
| Điện áp cung cấp | 3 V to 3.6 V |
| Hộp | 80-pin TQFP, 12 mm × 12 mm |
| Số lượng chân | 80 pins |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân DP83849IDVS 80-pin tqfp, 12 mm × 12 mm
Cấu hình chân cho DP83849IDVS (80-pin tqfp, 12 mm × 12 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho DP83849IDVS.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
DP83849IDVS phù hợp cho 6 Áp dụngs: Industrial Ethernet Switches, Factory Automation Controllers, Remote Monitoring Stations, Communications Network Equipment, Fiber-Backed Network Gateways, Industrial Network Interface Modules.
Industrial Ethernet Switches
The DP83849IDVS fits industrial Ethernet switch designs requiring two 10/100-Mbps physical-layer channels in one 80-pin TQFP device. Its documented industrial-temperature range of -40°C to +85°C supports factory automation and communications equipment operating beyond typical commercial temperatures. Two integrated PHY channels can simplify multi-port board allocation compared with using separate single-port transceivers. The implementation still requires the manufacturer-specified power, clock, magnetics or fiber interfaces, management interface, and decoupling. Engineers should verify link performance, isolation requirements, and regulatory margin for the exact copper and fiber media before releasing a production design.
Được đề xuất
Factory Automation Controllers
The DP83849IDVS can support factory automation controllers that need local Ethernet links for communication with sensors, remote I/O, supervisory systems, or service equipment. Two 10/100-Mbps ports can provide a main network connection and an additional management or redundancy path in a compact industrial-temperature design. Its -40°C to +85°C range is appropriate for controlled industrial environments, but enclosure temperature, isolation, grounding, and surge requirements must be evaluated separately. Use the manufacturer layout and media-interface guidelines to control board-level noise and preserve reliable link margins across the required cable lengths and environmental conditions.
Được đề xuất
Remote Monitoring Stations
The DP83849IDVS is applicable to remote monitoring stations that communicate over 10/100-Mbps industrial Ethernet and need more than one physical-layer port. One channel can serve the primary supervisory network while another supports equipment management, backup connectivity, or a separate network segment. The dual-port architecture reduces the number of PHY packages in a space-constrained station. The -40°C to +85°C industrial range also makes the device suitable for monitored cabinets and field-adjacent equipment. Before deployment, confirm the required copper or fiber medium, isolation architecture, restart behavior, and management firmware expectations against the complete datasheet.
Được đề xuất
Communications Network Equipment
The DP83849IDVS supports communications equipment that terminates two 10/100-Mbps Ethernet links while retaining the option of fiber support. The device is appropriate for industrial network-interface modules, remote-access equipment, and communication bridges where redundant or segmented links are useful. Its industrial-temperature operation supports equipment designed for extended-temperature installations. A successful design depends on selecting the correct media components and implementing the manufacturer-defined termination, clocking, decoupling, and isolation network. Verify system-level throughput, auto-negotiation behavior, link-loss recovery, and electromagnetic compatibility using the evaluation kit and application reference material.
Được đề xuất
Fiber-Backed Network Gateways
The DP83849IDVS can serve as the dual-port Ethernet PHY element in gateways that combine copper-connected equipment with fiber-backed infrastructure. Both PHY channels operate at 10/100 Mbps, enabling a gateway architecture with one local copper port and one extended-reach link when the required fiber interface is implemented as specified. The industrial-temperature range supports use in network cabinets and industrial gateways. Designers should not assume that the fiber interface can be implemented identically across family members, so the target datasheet should be checked for the supported optical components, configuration, and loss-of-signal behavior.
Được đề xuất
Industrial Network Interface Modules
The DP83849IDVS is suitable for a compact industrial network interface module that needs two 10/100-Mbps Ethernet channels without allocating separate PHY packages to each link. Its 80-pin 12 mm × 12 mm TQFP package provides a defined surface-mount form factor, while the -40°C to +85°C rating supports industrial equipment. The module can expose a management connection and a primary network connection, or use both ports for link redundancy. Production implementation must follow the manufacturer's complete pinout, power-supply, clock, magnetics, media, and layout requirements, with attention to thermal performance and industrial EMC constraints.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DP83849IDVS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DP83849IFVS/NOPB | DP83849IFVSX/NOPB |
|---|---|---|---|
| Package | 80-TQFP (12x12) | 80-TQFP (12x12) | 80-TQFP (12x12) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Port Count | 2 ports | 2 ports | 2 ports |
| Data Rate | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps |
| Pin Count | 80 pins | 80 pins | 80 pins |
Bảo phân biệt quan trọng
- Verified dual-port 10/100-Mbps integration (vsDP83849IFVS/NOPB)
- Explicit industrial operating range (vsDP83849IFVS/NOPB)
- Established 80-pin 12 mm × 12 mm TQFP target footprint (vsDP83849IFVSX/NOPB)
Ghi chú thiết kế
Begin the layout from the manufacturer PCB guidelines and evaluation-board schematic rather than a generic 80-pin TQFP footprint. Keep the PHY, clock source, decoupling network, and high-speed media interfaces positioned in accordance with the recommended topology. Verify every ball or lead assignment from the official package drawing, particularly power, ground, reference-clock, reset, management, and transceiver pins. The supplied excerpts do not contain the complete pinout, so an inferred layout would create unacceptable connectivity risk.
Provide the documented 3 V to 3.6 V operating range with low-impedance local decoupling and adequate source capability for both active ports. Because the supplied data does not include typical or maximum power dissipation, calculate the worst-case load from the manufacturer datasheet and allow for startup, fault, and transceiver states. Confirm that the supply remains within limits during link activity and that any auxiliary interface or fiber circuitry has compatible voltage levels before finalizing the rail architecture.
Do not treat a matching package name, data rate, and port count as sufficient proof of interchangeability. The DP83849IFVS-family candidates require verification of pin-to-pin assignments, strap options, clocking, management registers, media interfaces, reset behavior, and software configuration. The supplied comparison material identifies differences in package and compliance characteristics. Review the complete manufacturer comparison and perform a schematic, BOM, firmware, and PCB netlist audit before approving a replacement.
Use the evaluation kit to establish routing, termination, magnetics or fiber-component selection, and isolation strategy. Ethernet media interfaces can be sensitive to trace impedance, return paths, grounding, and nearby switching noise even at 100 Mbps. Follow the manufacturer's recommended component values and controlled-impedance geometry, and test across the required cable lengths. For fiber support, verify optical-module compatibility, loss-of-signal handling, and the exact media architecture defined for the DP83849IDVS.
Thông tin tuân thủ
The supplied excerpts do not explicitly state compliance status for DP83849IDVS. A comparison page mentions RoHS and REACH for related devices, but those statements were not applied to the target.
