EC21AFA-512-STD - LTE Cat 1 M2M Module | Quectel
MPN: EC21AFA-512-STD ✓ Hoạt độngEC21AFA-512-STD Tóm tắt
An LTE Cat 1 module is a category of LTE UE device class defined for low-cost, low-power machine-type communication. Within the wireless connectivity hierarchy (cellular module -> RF transceiver module -> wireless communication device), Cat 1 sits above Cat M1/NB-IoT in throughput but below Cat 4 and higher, making it the traditional choice for 2G/3G sunset migrations where a full-speed LTE fallback to WCDMA is required without the cost of higher LTE categories.
Key features include cost-effective LTE Cat 1 connectivity with downlink speeds up to 10 Mbps, integrated WCDMA fallback for coverage resilience, and on-module memory comprising 4 Gbit ROM and 2 Gbit RAM, which supports embedded applications and firmware headroom. Because the antenna is external, designers retain full flexibility in antenna selection and placement for optimal RF performance in enclosures.
The EC21 series architecture integrates the cellular modem, baseband, RF transceiver, and memory into a single LCC-style castellated package designed for reflow soldering onto the host PCB, a pattern common across Quectel's EC2x family, which simplifies layout reuse across family members.
Typical applications include telematics and fleet tracking units, smart metering and utility gateways, industrial routers and DTUs, security and alarm panels, and POS terminals - all scenarios where reliable mid-rate cellular data and long product lifecycles matter more than peak throughput.
A key design consideration is thermal and RF layout: the module must be placed with adequate ground plane and the external antenna matched per the carrier band plan for the North America variant; power supply sequencing and a stable 3.3-4.2 V rail with sufficient burst current are critical for LTE transmit bursts.
This page synthesizes distributor availability from DigiKey, Mouser, Arrow, Avnet and Octopart, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing shown requires quotation; verify current stock and lead time before ordering.
Bộ thay thế dễ dàng lắp đặt cho EC21AFA-512-STD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
EC21AFA-128-STD
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EC21AFD-512-STD
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EC21AUT-512-STD
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EC21AFR-512-STD
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EC21AFA-512-MINIPCIE
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EC21AFA-512-STD Thông số kỹ thuật
| Product Series | Quectel EC21 (LTE Cat 1) |
| Technology | LTE Cat 1 with WCDMA (3G) fallback |
| Maximum Downlink Data Rate | 10 Mbps |
| Regional Variant | North America |
| Memory Configuration | 4 Gbit ROM + 2 Gbit RAM |
| Antenna | External (antenna not included) |
| Package Style | Card edge (LCC-type), surface mount |
| Kiểu lắp đặt | Surface Mount (SMD, reflow soldering) |
| Application Target | M2M and IoT |
Hướng dẫn cấu hình chân EC21AFA-512-STD card edge (lcc-type), surface mount
Cấu hình chân cho EC21AFA-512-STD (card edge (lcc-type), surface mount gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho EC21AFA-512-STD.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EC21AFA-512-STD phù hợp cho 6 Áp dụngs: Fleet Telematics and Asset Tracking, Smart Metering and Utility Gateways, Industrial Routers and DTUs, Security and Alarm Panels, Payment Terminals and POS, IoT Gateways and Smart City Infrastructure.
Fleet Telematics and Asset Tracking
The EC21AFA-512-STD fits fleet telematics because LTE Cat 1's 10 Mbps downlink comfortably carries continuous GPS position reporting, driver-facing data, and over-the-air firmware updates, while the WCDMA fallback keeps units connected during route gaps in LTE coverage. Its North America band plan aligns with major US and Canadian carriers, simplifying certification. The external-antenna architecture lets integrators mount a roof antenna for superior urban and rural link margins compared to internal chip antennas. Power design should budget for LTE burst currents on a stable rail; the 4 Gbit ROM / 2 Gbit RAM memory supports buffering telemetry during coverage loss and resynchronizing once the link recovers.
Được đề xuất
Smart Metering and Utility Gateways
Utility metering and distribution-automation gateways need reliable, low-cost, long-lifecycle cellular data rather than peak throughput, which is exactly the EC21AFA-512-STD profile: LTE Cat 1 at up to 10 Mbps with 3G fallback, at commodity module cost. The on-module 4 Gbit ROM and 2 Gbit RAM run embedded TCP/IP stacks and local aggregation logic without an external processor memory upgrade. The surface-mount card-edge package supports automated assembly on meter PCBs, and the external antenna allows the RF path to be routed to a meter-enclosure antenna optimized for the North America LTE bands. Designers should verify the module's operating temperature rating against outdoor enclosure conditions in the datasheet.
Được đề xuất
Industrial Routers and DTUs
Data transfer units (DTUs) and industrial cellular routers use the EC21AFA-512-STD as their WAN engine: Cat 1's 10 Mbps downlink serves SCADA polling, Modbus/TCP bridging, and cloud telemetry, while WCDMA fallback maintains connectivity during LTE outages. The module's memory configuration supports always-on PPP/NDIS sessions, and the external antenna interface accommodates panel or DIN-rail antennas placed outside metal control cabinets, which is essential for signal integrity in factory environments. The reflow-solderable card-edge package withstands industrial assembly and vibration better than pigtail-based designs. Budget the power supply for LTE transmit bursts and verify the supply voltage range against the datasheet before finalizing the 4 V-class rail.
Được đề xuất
Security and Alarm Panels
Alarm and security panels require a cellular communicator that reliably delivers events, video clips, and cloud heartbeats at moderate bandwidth - the EC21AFA-512-STD's up-to-10 Mbps Cat 1 link handles this, with WCDMA fallback covering sites where LTE coverage is weak. UL-listed communicator designs benefit from the module's surface-mount card-edge format, which integrates directly onto the communicator board, and the external antenna allows the RF element to sit in the panel's plastic housing for best radiated performance in North American bands. The 4 Gbit ROM plus 2 Gbit RAM runs TLS-secured cloud connections locally. Confirm the module's power-down and standby behavior in the datasheet when designing battery-backed operation.
Được đề xuất
Payment Terminals and POS
Mobile point-of-sale terminals need certified North America cellular connectivity with enough bandwidth for encrypted transactions, receipts, and occasional firmware updates - well within the EC21AFA-512-STD's 10 Mbps Cat 1 envelope, at a module cost point that suits high-volume terminal production. The module's memory configuration supports secure TLS sessions without external assistance, and the external-antenna design lets terminal enclosures place the antenna away from the EM-noisy printer and display sections. The reflow-mounted card-edge package survives the repeated handling and thermal cycling of handheld devices. Pay attention to power-rail burst-current provisioning during LTE transmissions to avoid brownouts during transaction submission.
Được đề xuất
IoT Gateways and Smart City Infrastructure
Smart-city nodes - parking sensors, environmental monitors, digital-signage controllers, and streetlight controllers - aggregate many low-rate sensor streams into cellular backhaul, a duty the EC21AFA-512-STD serves with its up-to-10 Mbps LTE Cat 1 link and WCDMA fallback. The North America band plan and commodity cost make it a default choice for municipal deployments with long service commitments. Its on-module 4 Gbit ROM and 2 Gbit RAM buffer data during outages, and the external antenna supports the pole- or enclosure-mounted antennas typical of outdoor infrastructure. The surface-mount card-edge package enables conformal-coated, conformally-sealed gateway boards. Verify operating-temperature and voltage ratings in the manufacturer datasheet for unconditioned outdoor enclosures.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EC21AFA-512-STD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EC21AFA-128-STD | EC21AFD-512-STD | EC21AUT-512-STD | EC21AFR-512-STD |
|---|---|---|---|---|---|
| Package | Card edge (LCC-type), surface mount | Card edge (LCC-type) - same | Card edge (LCC-type) - same | Card edge (LCC-type) - same | Card edge (LCC-type) - same |
| Brand | Quectel | Quectel | Quectel | Quectel | Quectel |
| LTE Category | Cat 1 | Cat 1 | Cat 1 | Cat 1 | Cat 1 |
| Max Downlink Rate | 10 Mbps | 10 Mbps | 10 Mbps | 10 Mbps | 10 Mbps |
| Fallback Network | WCDMA (3G) | WCDMA (3G) | WCDMA (3G) | WCDMA (3G) | WCDMA (3G) |
| Antenna | External (not included) | External | External | External | External |
Bảo phân biệt quan trọng
- Cost-optimized LTE Cat 1 class (vsEC25-AF)
- WCDMA 3G fallback included (vsEC21AFD-512-STD)
- Large on-module memory tier (vsEC21AFA-128-STD)
Ghi chú thiết kế
LTE transmit bursts draw significant pulse current. Estimated: LTE modules of this class typically specify burst currents on the order of 0.5-2 A during transmission; design the 3.3-4.2 V-class supply rail with low-ESR bulk capacitance (for example 100 uF or more near the module VBAT pins) and verify the exact value against the EC21 hardware design guide. Undersized rails cause brownout resets that appear as intermittent network drops in the field, so validate with current probes during transmit.
Place the module with a continuous ground plane beneath it per Quectel's EC21 hardware design guide, keep the RF trace to the antenna connector at 50 ohms with a matching network accessible for VNA tuning, and route USB/UART lines away from the RF path. The castellated card-edge pads are designed for reflow soldering - use the recommended stencil aperture and paste volume to avoid bridging on the fine-pitch edge pads during assembly.
The EC21AFA-512-STD includes no antenna - forgetting the external antenna yields drastically reduced range or no registration at all. Second, regional variants matter: this AFA part is the North America version, and deploying it on European or Asian carrier bands will fail certification. Third, cellular modules require carrier/regulatory certification of the final device; plan certification time and confirm the exact memory suffix (512) matches your firmware image requirements before locking the BOM.
Thông tin tuân thủ
Compliance status not stated in the verified web data compiled on 2026-10-20; obtain RoHS/REACH declarations from Quectel or the authorized distributor.
